REPAIR TO JOINERY, FLOORING, ROOF, MISC B AND R WORKS AND PERIODICAL SERVICES AT BAKNAUR UNDER GE (AF) AMBALA

Amount

S&F Solid PVC Door frame of size 50 mm x 47mm made out of 5mm plain PVC sheet reinforced with 19mm x 19mm M.S. Square tube profiles are mitred cut at corners and joined by insrting 2 Nos 150 mm long brackets of 15mm x 15 mm MS square tube shall 19 mm x 19 mm in square tubes and suitably screwed suppling & fixing in opening, including taking down and making good finish complete all as specified and as directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixed in the frame at site, including PVC Butt Hinges 100mm - 3 nos per leaf, PVC Tower Bolt 200mm long - 2 nos per leaf, PVC Handles 125 mm long - 2 nos per leaf and necessary fittings as required, complete as per specification and drawing including taking down complete all as specified and directed by Engineer-in-Charge.

S&F steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, including wire cloth and 3mm thick glazing, complete with glazing bars dovetailed or welded including MS fillets, welding of 10 mm guard bars and one coat of red oxide primer and two coat of synthetic enamal paint over window, frame & guard bars including taking down and making good finish complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (AF) Ambala. complete all as specified and directed by Engineer-in-Charge.

M&L for hand rails, half round or other steel section, mild steel work joist, channel, angles or Tee section, fixed independently without connecting plates etc (cut to ordinary length), in window guard bars, plain sheet, angle etc for gates, coolar stand (portable/ fixed in wall etc) grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling/taking down complete all as specified and directed by Engineer-in-Charge.

S&F Powder coated Pressed steel frames made of MS sheet of 1.20 mm thickness of size 105mmX60mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts , PCC 1:3:6 type C-0 in filling inside frame & hold fasts etc including taking down complete all as specified. Note :- Disturbed portion of existing floor /wall / tile / plaster etc during fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )

S&F Pressed steel frames size 125mmX60mm for doors with one or more rebates, 1.20mm thick mild sheet including necessary fixing lugs, hinges, lock strike plate, hold fasts , PCC 1:3:6 type C-0 in filling inside frame & hold fasts etc including taking down complete all as specified. Note :- Disturbed portion of existing floor /wall / tile / plaster etc during fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )

S&F factory made flush shutters 30mm thick, 7 Ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces are covered and including painting with one coat of pink primer and two coats of synthetic enamel paint and S&F following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf, (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf, including taking down complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick glazed and skelton shutters of IInd class soft wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated including preparation of new wood surface ,applying two coats of synthetic enamel paint over a coat of pink primer all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and the S&F following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 01 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf, (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf, including taking down complete all as specified and directed by Engineer-in-Charge.

S&F mild steel framed work as in door of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings including running rails and guides and hanging, fastening, fixing and Cutting holes in brick/Stone/RCC walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete conforming to Fe 410E, Gde E-250 including taking down and making good finish complete all as specified and as directed.

M&L Mild steel plain, black 1.25mm thick sheet in steel gates and similar work , cut to size, fixed to steel framing gates with plain 40mm lap joint with welded or riveted complete all as speified and directed

S&F 35 mm thick, 2nd class hardwood rail and style plain, framed, panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face. The size of rail and stile as per IS :1003 (Part I), kiln seasoned and chemically pressure treated including (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 03 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 1 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf, (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf, including taking down complete all as specified and directed by Engineer-in-Charge.

S&F in position anodised (minimum thickness of anodising shall be 15microns) aluminium door shutter weighing 0.55Kg/m and chowkhat made out of hollow extruded aluminium sections as detailed, each door having 02Nos disc or 'D' type handles, 02Nos aluminium tower bolts 200mm size, one brass mortice lock six levers with key in duplicate, 01xdoor closer fixed with aluminum hinges to chowkhat shutter, partly glazed with 5mm thick tinted glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading / gasket anodized aluminium beading screws, etc. including taking down and making good finish complete all as specified and as directed Section details: Chowkhat Frame: 101.60x44.45x1.6mm thick Shutter vertical/stile: 83.50x44.45x1.62mm thick Shutter middle rail: 83.50x44.45x1625mm thick

S&F in position anodised (minimum thickness of anodising shall be 15microns) aluminium sliding window / ventilator (Bombay sliding window) shutter (glazed and wire gauzed) and chowkhat made out of hollow extruded aluminium sections as detailed, glazed with tinted glass 4mm thick fixed with glazing clips, rubber beading /gasket anodized aluminium beading screws and lock type handles of size 75mm, aluminium sec minimum weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, anodised aluminium snap beading, 5mm thick glazed and wire cloth and scews anodised aluminium fittings as directed by Engr in Charge etc including taking down and making good finish complete all as specified and as directed Section details: Chowkat bottom: 101.6x44.45x1.62mm thick., Chowkhat top & sides: 101.6x44.45x1.62mm thick.

S&F anodised aluminium window and ventilator double shutter (glazed and wire gauzed), side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, anodised aluminium snap beading, 5mm thick glazed and wire cloth and scews anodised aluminium fittings such as peg stay 150mm long (01 No), hinges type B-21 100mm long (02 to 03 Nos) suitable handle (01 No) including frame work/chowkhats Aluminium sec: 101.6x44.45x1.62mm thick., and .taking down and making good finish complete all as specified and as directed.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard hollow aluminium section/tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket and prelaminated particle board 12mm thick interior grade, complete all as per architectural drawings and the directions of Engineer-in-Charge.

S&F in aluminium/steel/timber frame of prelaminated particle board 12mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws. including taking down and making good finish complete all as per architectural drawings and the directions of Engineer-in-Charge.

S&F Butt hinges 100 mm size, medium weight, cold rolled mild steel complete all as specified and directed..

S&F 300mm long, Aluminium alloy, anodised sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F 200mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150 mm size complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks in repairs or galvanised wire staples complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including hackingout complete all as specified and directed.

S&F 3 mm thick ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane, fixed in steel/wooden frames, including hackingout complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps when open to be 40mm.complete all as specified and directed.

S&F in repair 18/19mm Prelaminated particle board, interior grade prelaminated both side decorative choice lamination & other side balancing white lamination, fixed with screws to timber/iron frame work of cupboard (including frame work and joinery fittings) complete all as specified and directed.

S&F in repair Door closer aluminium (dia cast) body hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

M&L for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, ISI marked overall length of cover plate 140 mm fixed in floor with standard aluminium screws complete all as specified and directed.

M&L for Mild steel, 300 mm, helical door spring including roller and roller plate, ISI marked, complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing and bars fixed in repair etc complete all as specified and directed.

M&L for preparing surfaces of new or previously untreated surfaces of steel or metal works and applying two coats of synthetic enamel paint over one coat of red oxide over 10cm in width or girth complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood & wood based and applying two coats of synthetic enamel paint over a coat of pink primer, over 10 cm in width or girth complete all as specified and directed.

S&F Ball bearing for rolling shutters in repair any size suitable to existing MS pipe complete all as specified and directed.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, thickness of laths in 1.00 mm, including 50mm shaft pipe, spring etc, complete: push pull or manual type complete all as specified and directed.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, thickness of laths in 1.00 mm, including 50mm shaft pipe, spring etc, but gear operated type with bevel gear box and crank handle including taking down complete: push pull or manual type complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for Cement concrete 25mm thick type B-1 1:2:4(20mm graded mechanically crushed stone aggregate) in floor sub base complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded mechanically crushed stone aggregate) in plinth protection including cutting and filling constr joint with sealing compound grade A complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for first quality, glazed ceramic color tiles in vertical surfaces size 450x300x7mm thick including 10mm thick rendering (1:4) , set and jointed with grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-charge.

M&L for joint free, non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc set and jointed in neat cement slurry and pointed in white/coloured cement to match, incuding 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for light shade vetrified ceramic tiles 10mm thick (square/rectangular) polished, arrea of each tiles not exceeding 0.36 sqm, in floors etc. etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles colour, including 15mm thick screed bed (1:6),complete all as specified abd directed.

M&L for 18 to 20mm thick (Full length size) Granite of any shade (table rubbed and polished as in cooking platforms and like set in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture to match including moulding of free exposed of marble slab (fixed as in repair) all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone slab as in flooring steps/skirting 18-20 mm thick, set and jointed in cement slurry including screed of 15 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing, in floors/steps etc, complete all as specified and directed. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M&L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete with pointed in cement mixed with pigment to match the shade stone slab, in floors/steps etc, complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B 1 (using 20 mm graded mechanically crushed stone aggregates) as in floor complete all as specified and directed.

S&F , 15 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors including taking down steel tubing and connections complete as specified and directed.

S&F , 20 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors including taking down steel tubing and connections complete as specified and directed.

S&F in repairs, 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15 mm bore pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as specified and directed.

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd, making good cement work complete all as specified and directed..

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), coloured, including fixing acessories, complete all as specified and directed.

S&F in repairs Vitreous china wash hand basin, white, flat back, size 640x450mm excluding taps, waste , chain and plug and porcelain stopper but including brackets. complete all as specified and directed.

S&F in repairs , Vitreous China Urinal, half stall type, white, (excluding flushing cistern and flush pipe and waste pipe complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and washers, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repairs Brass chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in complete all as specified and directed.

S&F in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 110 mm size, complete all as specified and directed.

S&F in repairs 110 mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches/walls or in floors complete all as specified and directed.

S&F in repairs 75 mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches/walls or in floors complete all as specified and directed.

S&F in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 75 mm size, complete all as specified and directed.

S&F in repairs PVC cowl any radius, conforming to IS:14735 suitable for 110 mm bore, complete all as specified and directed.

S&F in repairs PVC floor trap with PVC grating suitable for 75 mm external dia, type-B pipes, ISI marked complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement for 110 mm external dia, type-B pipes, ISI marked complete all as specified and directed.

S&F in repair, Harrison rails, steel, chromium plated with fixing brackets, stops, fancy type , 20mm bore having facny end knobs at each end, fixed with rawl plug to wall as in curtain rods complete all as specified and directed. Note : Design shall be as approved by GE.

S&F in repairs, 15 mm bore Brass CP mixer for Wall fitting, and for wash hand basin, mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I. including dismantling of water tank complete all as specified and directed.

M&L for Disconnecting water tanks of capacity exceeding 250 and not exceeding 500 litres capacity water tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position. (cleaning repairing , etc measured separately). complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc from PVC tanks exceeding 250 but not exceeding 500 litre capacity tanks from mouths of circulating pipes, etc complete all as specified and directed.

S&F in repair Cast copper alloy, chromium plated Tubular towel rail, 20mm dia, D type, 60cm long, complete all as specified and directed.

M&L for Cement concrete tiles 30cm x 30cm x 20mm thick laid and bedded in cement mortar 1:6, 15mm thick and joints grouted flush in cement mortar 1:3 mixed including Dismantling brick tiles or terracing tiles single layer on roof, cleaning and stacking the serviceable tiles for reuse, offering credit for unserviceable tiles complete all as specified and as directed.

Demolition of mud/ cemented work in roof any thickness including plastering and leeping (Whether full thickness removed or only part thereof) complete all as specified and directed.

M&L for roughing surfaces of roof after removal of mud phuska/ cemented work completely and applying cement slurry with 3.00 Kg /Sqm complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150gms/Sqm) laid on primed surface by forced application complete all as specified by torching process as per manufacturer instruction complete includingpplying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces including side overlaps as specified, complete all as specified and directed. Note : (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee (on account of any defect raised/noticed during a period of ten years) and shall be released after 10 years of completion of work. However contractor may deposit the FDR of same amount in favour of GE. If contractor fails to rectify the defect pointed out during this period , the defect shall be got rectified at contractor's risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

M&L for 10mm thick plastering in cement mortar 1:4 on RCC roof slab surfaces, finished even and fair without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm mechanically crushed stone graded aggregate) laid over roof slab as in padding to make good the depressions all as specified & directed by Engineer-in-Charge.

Supply only integral water proofing compound and mixed with CM as per manufacturer instructions, complete all as specified and directed.

S&F machine crafted box type cabinet for kitchen using 19 mm thick HDHMR board with single Side Prelaminated particle and other side plain coloured sheet with and including all necessary fittings and fixtures to install the wire basket, shutters shall be fixed by using full overlay MS clip on hinges high quality nickel plated satin finish size 101mm-150mm, 02 Nos per leaf , including all all fittings , channels , 150 mm S/S Handles complete all as specified and directed. Note : (i) Wire basket shall be measured separetely. (ii) Front area of box shall be considered for payment purposes. (iii) Depth of box shall be equal to the width of cooking platform.

S&F wire basket made of top quality 304 grade stainless steel , Nickel chromium plated (Ni 4 %) of approved design and pattern complete all as specified and directed.

M & L for Providing & fixing in repair false ceiling at all heights with Non asbestos desinger Gypsum board or ceiling tiles 4mm thick of Size 600x600mm/595 x 595 mm of approved texture, design and patterns, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including anodised aluminium grill frame fixed or laid/ inserted to anodised aluminium snap grid frame work for false ceiling size of grid 600x600mm with Hangers fixed to roof slabs by means of ceilling cleats and expansion hold fasteners including taking down timber/ GI/ Aluminium framework with screws including taking down all as specified and directed Note: Unit rate quoted against this item shall also include taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fance etc carrying out necessary relevant work and making good to match witch existing surfaces effected for this area etc.

S&F GI metal powder coated suspended ceiling of approved materials of size 595x595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120grams/Sqm, both side inclusive) consisting of main "T" runner with suitably spaced joinets to get required length and of size 24x38 mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm centre to centre and cross 'T' of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main 'T' at 600mm center to centre from a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to forms grids of 600x600mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture in the grid including , required cutting/making, opening for services like diffusers, grills light fittings fixtures smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvansied butterfly level clips of size, 85x30x0.8mm spaced at 1200 center to center along Main 'T' , bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications including 4mm thick HPSC pre prime non asbestros fiber cement building board (E-classic or equivalent ) decorateive finish fixed to frame work with hold down clips in false ceiling complete all as specified and as directed. Note: Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fance etc carrying out necessary relevant work and making good to match witch existing surfaces effected for this area etc.

S&F of 5mm thick plain colour PVC sheet hollow interlocking wall paneling of width 250mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC 'U' and 'L' beading at corner and end portion whereever required of matching colour including taking down of existing wall lining board of insulation board /panelling including cover fillets of any type and thick complete all as specified and as directed by Engr In Charge. Note: Unit rate quoted against this item shall also include taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fance etc carrying out necessary relevant work and making good to match witch existing surfaces effected for this area etc.

S&F of 5mm thick plain colour PVC sheet solid PVC for wall paneling/lining PVC sheet inclusive of solvent cement and fixing at site with and including 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and directed including taking down of existing wall lenining board orinsulation board including cover fillets of any type and thick complete all as specified and as directed by Engr In Charge. Note: Unit rate quoted against this item shall also include taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fance etc carrying out necessary relevant work and making good to match witch existing surfaces effected for this area etc.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing Fe-410- W(Gde?E-250) quality?B (Beam, tee, angle, channel or flat sections, tubular/hollow sec) including distance pieces, cleats and taking down etc as in trusses coolar stand gate and similar nature of work . complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws / L type or J type hook including dismantling of rusted/damages roof sheeting of any type complete all as specified and directed.

M&L for brick work with sub class 'B' brick (old size) straight or curved on plan exc 6m mean radius in CM (1:6) including demolition of bricks complete all as specified and directed.

M&L for brick work as in half brick thick wall with sub class 'B' brick (old size) straight or curved on plan any radius in CM (1:4) including demolition of bricks complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces including taking down if necessary of plaster complete all as specified and directed.

M&L for rendering 10mm thick on fair face of brick walls or concrete surfaces in CM 1:6 finished even and smooth without using extra cement including taking down if necessary of plaster complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:4 mixed with WPC @ of 2% by wt of cement finished even and smooth without using extra cement including taking down if necessary of plaster complete all as specified and directed.

M&L for 5mm thick cement plaster in CM 1:4 in the soffits of ceiling/slabs/chajjas/ sunshade etc and finishing the surface even and smooth without using extra cement including taking down if necessary of plaster complete all as specified and directed.

M&L for rough cast plaster on brick wall or concrete surfaces complete all as specified in SSR Part - I clause 14.22, including taking down complete all as specified and directed. Note : Rough cast finish to be as below :- 1. After applying the under coat of cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered. 2. Rendering 15mm thick CM 1:3 paid seprately.

M&L for preparing newly plastered surface and applying two coats of distemper oil emulsion over a coat of putty complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint white or tinted over a primed plastered and other surfaces with alkali resistant priming paint, incl border blue(apex) on rcc/parapet etc, complete all as specified and directed.

M&L for preperation of new plastered surface of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new or untreated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying one coat of exterior acrylic emulsion anti fungal paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge,

M & L for complete removal by mechanical means of old/existing treatment incl preparation of wall sufaces of any description and applying two coats of exterior grade weather proof paint water based over a coat of primer and 1 mm birla care putty, on wall surfaces complete all as specified and directed. Make Asian, Berger and Nerolac Note : Height of the bldgs is Appx 12 mtr. cost of necessary scaffolding and security provision of labour shall be deemed to be included in the quoted rate. First the complete removal of existing treatment shall be done and got approved from Engr-in-charge. Final coat shall be done after getting approval of completion of priming caot from Engr-in-Charge

M & L for complete removing by mechanical means old treated external walls/RCC surfaces/soffits of chajjas/roof rojections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat over a coat of exterior wall primer by using branded cement based paint, including filling wall putty in minor holes/depressions, sand papering etc, including repair of plastering patch each not more than 0.25 Sqm complete all as specified & as directed by Engineer-in-Charge. Note : The item rate should include for work upto 15 Mtr height. cost of necessary scaffolding and security provision of labour shall be deemed to be included in the quoted rate.

M & L for preparing of existing treated surfaces on walls/ old treated external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying one coat of cement base paint @ 5 sq.m/kg/1 coat over a coat of exterior wall primer by using branded cement based paint and including exterior grade weather proof paint water based in blue colore on RCC surfaces and parapet walls etc, including filling wall putty in minor holes/depressions, sand papering etc, including repair of plastering patch each not more than 0.25 Sqm complete all as specified & as directed by Engineer-in-Charge. Note : The item rate should include for work upto 15 Mtr height. cost of necessary scaffolding and security provision of labour shall be deemed to be included in the quoted rate.

M&L for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying one coat of exterior acrylic emulsion anti fungal paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge,

M&L for complete removal of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying two coat of exterior acrylic emulsion anti fungal paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge,

M&L for preparing existing treated surfaces on walls/ceilings including cornices and applying two coat of white wash by making the lime slaked at site, including filling of minor holes /cracks with putty, complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing old plastered surface and applying one coats of distemper oil emulsion over a coat of putty complete all as specified and directed.

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M & L for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M & L for writing letters or figures (block, Roman, Italian, Indian) Not exceeding 30 cm High including Stops,height not less than 10cm, commas, short lines, dashes, hyphens, brackets, etc, complete all and the color of the paint and dimension of the letter to be used as approved by Engineer-in-Charge

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good of cutting in any girth complete all as specified and directed.

SWAMI ENGINEERS (BID ID -3069353)