Loading
Loading…
Loading…
Tender Value
₹8.4 Cr
EMD Value
₹16.9 L
Closing Date
1 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TRD
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V or V/N crore, whichever is less; were V= Advertised value of the tender in crore of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
10 conditions · 9 needing a document upload
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, PAN Number, Mobile Number and e-mail address
At the time of submission of bid, if you have any special Condition then upload in scanned pdf copy.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works completed in last Seven years (Ending last day of month previous to the one in which tender is invited) giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall also be given.
Please furnish list of works on hand indicating description of works, contract value, Approximate value of balance work yet to be done and date of award.
Tenderer should submit valid electrical contractor license issued by electrical inspector to state government with the offer. If electrical contractor license has been expired, tenderer should submit receipt of renewal electrical contractor license issued by electrical inspector to state government with offer also. At the time of contract agreement, contractor must submit valid electrical contractor license issued by electrical inspector to state government. If tenderer have not submit the valid electrical contractor license, the offer will be summarily rejected.
The tenderer whether sole proprietor/ a company or a partnership firm / joint venture (JV) / registered society / registered trust/HUF/ LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to sign the tender, submit the tender, and further to deal with the Tender/Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed/ Memorandum of understanding/ Article of Association/ Board resolution, failing which tender shall be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tendering firm must have valid Electrical Contractor's License issued by the Government in their own name or firm name. A copy of the license shall be uploaded along with the tender offer, failing which the offer shall be summarily rejected. The license must be valid as on the date of opening of the tender.
Replacement of 66kv electrical power line crossing by underground cable (10 Nos Crossing) between RJT-OKHA section of Rajkot division.
DRM-RJT-EL-TRD-2026-27-01
DRM-RJT-EL-TRD-2026-27-01
Open
Works - General
12 Months
Rajkot, Gujarat
₹0
₹16.9 L
1 May 2026
9 Apr 2026
17 Apr 2026
117 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 8,43,07,767.4 | ||
| — | 5.00 | — | — | ||
| Check Survey along with plotting of line route on Approved village (tika) map with Coordinates including detailed survey, preparation of profiles and revision in original route alignment, if any. | — | — | — | 27,802 | |
| — | 3.00 | — | — | ||
| Carrying out preparation & submission of detail route survey report for underground cable by utilizing modern techniques. | — | — | — | 48,177.87 | |
| — | 35.00 | — | — | ||
| Erection of 'H' Frame structure with channels, bracing, clamps elc for angular location up to 60degree deviation/dead end C type location including excavation in Normal/block cotton soil (Dry/Wet/Submerged) and back filling of earth, ramming and with supply of bolls, nuts and paintingof the complete structure including required Tree Cutting Before erection, one coal of good quality primer must be applied to the complete structure and black Japan paint of standard make should beapplied up to 3 mtr from bottom. After erection, two coals of aluminums paint of Asian/Burger/Nerolac make shall be applied to the complete structure as per GETCO specification. | — | — | — | 4,99,493.05 | |
| — | 3.00 | — | — | ||
| Stringing of 1 (One) ground wire for including laying, jointing, tensioning, clamping with accessories, jumpering & sister wire, vibration damper earth bond etc. complete including required tree cutting as per GETCO/EIC specification. | — | — | — | 51,598.92 | |
| — | 3.00 | — | — | ||
| Stringing of ACSR/ AAA 3 (Three) "PANTHER "/"Dog" conductor for single circuit including laying, jointing,tensioning, clamping with armor rod, hoisting of insulator string, jumpering, fixing of dampers etc.complete as per specification including required tree cutting with adequate clearance and safe charging of line as per GETCO specification. | — | — | — | 1,03,679.07 | |
| — | 2.00 | — | — | ||
| Stringing of ACSR/ AAAC 6 (Three) "Panther"/"Dog" conductor for double circuit including laying, jointing,tensioning, clamping with armor rod, hoisting of insulator string, jumpering, fixing of dampers etc.complete as per specification including required tree cutting with adequate clearance and safecharging of line as per GETCO/EIC specification. | — | — | — | 1,63,778.88 | |
| — | 80.00 | — | — | ||
| Grounding of above 'H' frame/single pole structure with pipe type earthing as per drawing including excavation by augering & black filing & supply of all materials like 32mm dia. medium duty 2 mtr. Long GI pipe (B Class Blue mark) & G.I. flat of 50 x 6 mm size including supply of bolt, nuts sell, coal charcoal elc as per GETCO drawing. | — | — | — | 4,70,296.8 | |
| — | 60.00 | — | — | ||
| Erection of stay set complete with slay clamp, turn buckle, eye bolt, anchor rod and binding with 7/8 or 7/10 SWG earth wire as per GETCO specification. | — | — | — | 45,996.6 | |
| — | 3000.00 | — | — | ||
| Tack welding of nuts at three places on the nuts diametrically filled to 'A', 'B' and 'C TYPE structure and applying red oxide & zinc rich paint on it immediately after tack welding. | — | — | — | 56,310 | |
| — | 10.00 | — | — | ||
| Transportation of Girder/Rail from Board's nearest Store Centre to one end of the line including loading and unloading for 20 girder/rail for 9 MT. | — | — | — | 1,66,164.7 | |
| — | 20.00 | — | — | ||
| Conversion of 'A' type 'H' frame structure into 'B' Type 'H' frame structure in existing line by replacing necessary channels etc. and termination and restringing of Dog or Panther 3 conductorsfor making LILO arrangement with existing line or for changeover of line during availability of specified outage only. | — | — | — | 6,77,624.6 | |
| — | 400.00 | — | — | ||
| Excavation excluding back filling, but including shoring, shuttering, dewatering, tree cutting for tower footings etc. for Normal soil either dry or wet/Sandy soil. | — | — | — | 1,24,116 | |
| — | 400.00 | — | — | ||
| Excavation excluding back filling, but including shoring, shuttering, dewatering, tree cutting for tower footings etc. for Black Cotton Soil either dry or wet. | — | — | — | 2,47,812 | |
| — | 600.00 | — | — | ||
| Providing concreting with M20 mixture including shoring, shuttering, compaction, dewatering etc. for normal Tower/Tower with extension upto 25 mtr/all structures . After completion of concrete work, watering to concrete is to be done as per instruction of EIC, Rate are inclusive of supply of GETCO approved Cement only. | — | — | — | 71,76,114 | |
| — | 20.00 | — | — | ||
| Dismantling of any Tower and crediting line material to near store as per instruction of Engineer in-charge. such as insulators, hardwares etc. andcrediting to the Board's store asper instruction of Engineer incharge. | — | — | — | 1,70,258.6 | |
| — | 20.00 | — | — | ||
| Dismantling of 'A' & 'B' type 'H' frame structure by breaking of muffing upto 450 mm depth from ground level and cutting the griders from 450 mm depth from ground level by gas cutting & crediting the material to GETCO Store as instructed by Engineer in charge. | — | — | — | 1,54,695.6 | |
| — | 3000.00 | — | — | ||
| Dismantling of all three conductors and line materials such as insulators, hardware etc and crediting to the Board's Store as per instruction of Engineer in- charge with submission of pole wise inventory forpreparing C.R. note | — | — | — | 46,590 | |
| — | 20.00 | — | — | ||
| Providing & fixing of NP with name of line / DP including supply of bolts & nuts and lack welding/punching as per drawings | — | — | — | 37,411.6 | |
| — | 20.00 | — | — | ||
| Providing & fixing of Anti Climbing Device on both the girders as per drawing. | — | — | — | 42,377.4 | |
| — | 20.00 | — | — | ||
| Painting of Name of Line Location Number, Colour Code, and telephone number on D.P (2legs) for information of concerned substation including supply of paints, etc. | — | — | — | 5,758.4 | |
| — | 1600.00 | — | — | ||
| Under ground laying/installation of 66 KV [E], 630 Sqmm XLPE Power cable for Single circuit (3+1) with 4Nos. single core cables, along with one spare cable inclusive of requisite materials supervision,testing & installation pre-commissioning tests etc. and associated civil works which are necessary in laying/ installation of the power cable. Laying/installation of single core power cable on 66 KVsupporting structure along with fixing SVL with link box & w/o SVL link box & all required accessories,clamping etc. (Route/Meter route length laying of the [3+1] Nos, be quoted) includes Excavation of all type of soils Back filling & civil work etc complete. | — | — | — | 55,80,400 | |
| — | 400.00 | — | — | ||
| Do for Road/Railway/Gas/Oil/Water/ Drainage Pipe line crossing with Trench less Digging & HDPE/NP4RCC Hume pipe for single circuit crossing | — | — | — | 48,98,672 | |
| — | 80.00 | — | — | ||
| Providing & Installation of Out door end termination joint for power cable, complete in all respectincluding connection to link box and erection of link box etc. for 630 sqmm cable as per GETCO specification. | — | — | — | 92,31,345.6 | |
| — | 10.00 | — | — | ||
| Providing & Installation of Three phase earth Link Box with SVL. | — | — | — | 6,54,064.1 | |
| — | 10.00 | — | — | ||
| Providing & Installation of Three phase earth Link Box without SVL. | — | — | — | 5,68,872.8 | |
| — | 20.00 | — | — | ||
| ITC of Metal Oxide LA on Cross arm of 66KV Tower/DP structure including all materials fixing trays and Clamp Connector earthing pipe & earthing Patty etc. Supporting arrangement etc. (1 set=3 Nos.) | — | — | — | 32,53,521 | |
| — | 4.00 | — | — | ||
| SITC of ACSR Panther Conductor as per GETCO specification. | — | — | — | 8,41,713.12 | |
| — | 120.00 | — | — | ||
| SITC of Single Tension H/W for Dog/Panther conductor as per GETCO specification. | — | — | — | 1,61,103.6 | |
| — | 120.00 | — | — | ||
| SITC of 66kv Tension SRI - 120 KN as per GETCO specification. | — | — | — | 1,85,086.8 | |
| — | 120.00 | — | — | ||
| SITC of Vibration Damper for Dog/Panther (AS per MICR) as per GETCO specification. | — | — | — | 55,118.4 | |
| — | 30.00 | — | — | ||
| SITC of Repair Sleeve for Dog/Panther Conductor as per GETCO specification. | — | — | — | 6,502.5 | |
| — | 30.00 | — | — | ||
| Supply of Mid Span Joint for Dog/Panther Conductor as per GETCO specification. | — | — | — | 14,365.8 | |
| — | 8.00 | — | — | ||
| Supply of 66KV 1C x 630 Sq.mm Poly Aluminum Power Cable as per GETCO specification. | — | — | — | 2,59,59,826.48 | |
| — | 1000.00 | — | — | ||
| Supply of 1C x 150 sq.mm Copper Cable 66KV L.A as per GETCO specification. | — | — | — | 13,93,740 | |
| — | 60.00 | — | — | ||
| Supply of 66KV L.A as per GETCO specification. | — | — | — | 11,69,213.4 | |
| — | 120.00 | — | — | ||
| Supply of Fabricated MS Girder 150 x 150 mm 13 Mtr long as per GETCO specification. | — | — | — | 33,67,884 | |
| — | 80.00 | — | — | ||
| SITC of C type Top Channel as per GETCO specification. | — | — | — | 5,16,228 | |
| — | 320.00 | — | — | ||
| SITC of Cross Bracing as per GETCO specification. | — | — | — | 3,94,972.8 | |
| — | 160.00 | — | — | ||
| SITC of Parallel Bracing as per GETCO specification. | — | — | — | 1,39,070.4 | |
| — | 240.00 | — | — | ||
| SITC of Five-hole Pattie as per GETCO specification. | — | — | — | 38,529.6 | |
| — | 20.00 | — | — | ||
| SITC of B type Top Channel as per GETCO specification. | — | — | — | 1,11,307.6 | |
| — | 60.00 | — | — | ||
| SITC of Turn buckle as per GETCO specification. | — | — | — | 29,555.4 | |
| — | 60.00 | — | — | ||
| SITC of Anchor Rod as per GETCO specification. | — | — | — | 54,627.6 | |
| — | 60.00 | — | — | ||
| SITC of I bolt as per GETCO specification. | — | — | — | 8,595 | |
| — | 60.00 | — | — | ||
| SITC of Stay clamp as per GETCO specification. | — | — | — | 7,231.2 | |
| — | 2000.00 | — | — | ||
| SITC of Stay wire as per GETCO specification. | — | — | — | 89,440 | |
| — | 20.00 | — | — | ||
| Supply of copper earth bond | — | — | — | 10,361.6 | |
| — | 30.00 | — | — | ||
| Supply of GI Tower Materials as per GETCO specifications | — | — | — | 31,33,257 | |
| — | 1.00 | — | — | ||
| Supply of GI Nut Bolts. | — | — | — | 1,37,686.23 | |
| — | 1.00 | — | — | ||
| Supply of GI Eath Wire 7/3.15 | — | — | — | 48,068.15 | |
| — | 10.00 | — | — | ||
| Supply of Eath wire tension clamp. | — | — | — | 4,685.2 | |
| — | 1600.00 | — | — | ||
| Supply of FOAC (Fiber Optic Armored Cable) for 66 kv system as per GETCO/EIC specification. | — | — | — | 4,47,440 | |
| — | 800.00 | — | — | ||
| Laying of 2 no. of FOAC Cable in HDPE pipe (One pipe for FOAC cable) along with laying of 66 kVUnderground Power Cable (Rates included all minor supply requirements like pipe, joints etc. except FOAC Cable). | — | — | — | 5,21,400 | |
| — | 3.00 | — | — | ||
| Installation of steel reinforcement in concrete foundation including supply of GETCO Approved M.S.bars, binding wire. Work also includes their cutting, bending, shaping and binding with binding wireand fixing in position of TMT bars as per drawing before the concrete work | — | — | — | 2,90,674.53 | |
| — | 10.00 | — | — | ||
| Stub-setting with prop or template including back-filling, during back filling dispose of excess soil and levelling of site is to be done as per instructions of EIC but excluding excavation and concretingetc. for all types of towers/extensions except special towers. (Weight of stub, cleat & template withBolt & Nuts of stub & template shall be counted) Up to 6 Mtr Extension. | — | — | — | 83,052.6 | |
| — | 40.00 | — | — | ||
| Erection of super structure upto 6 meter extension including tree cutting, fixing of tower accessories, attachments except ACD /DP /NP /CIP /PP and excluding tack welding of bolts as perinstruction of EIC. This includes taking delivery of tower materials and bolt nuts from GETCO'sstores etc. for normal, extension & special towers at destination and keeping them in safe custody and transporting the same to erection site. | — | — | — | 4,08,320.8 | |
| — | 100.00 | — | — | ||
| Supply, Fabrication, Installation, Fixing of Cable Route Marker (R.C.C. Type) as per GETCO standard drawing (Drg. No.: GETCO/ 66KV/UG CABLES/C/RM Dt. 16.03.2019 Rev. R0) including all associated civil works i.e. excavation and foundation in all type of soil grouting with concrete,cleaning, painting etc. with all completeness and as per the instruction of the site engineer. | — | — | — | 1,75,778 | |
| — | 10.00 | — | — | ||
| ROW Cost | — | — | — | 1,00,00,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril2022.pdf
ATTACHMENT
GCCACS1to11.pdf
ATTACHMENT
TenderDocs66KVRJTOKHA.pdf Tender Documents
ATTACHMENT
TenderDocs66KVRJTOKHA.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .