Loading
Loading…
Loading…
Tender Value
₹1.7 L
EMD Value
₹4,230
Closing Date
28 Sept 2026, 5:00 pmDue tomorrow
MUNICIPAL ENGINEER
MARADU MUNICIPALITY
254/2026-2027 RENOVATION OF VARIOUS M C F-.- General Civil Work
2026_LSGD_871435_1
E3-01/2026-27/ME/LID and EW/EKM
Open Tender
Civil Works - Roads
Item Rate
MARADU MUNICIPALITY
Please refer Tender documents.
6 documents required · 6 mandatory
₹555
Yes
₹4,230
Yes
MARADU MUNICIPALITY
19 Sept 2026
19 Sept 2026
30 Sept 2026
19 Sept 2026
28 Sept 2026
19 Sept 2026
19 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1building | |||||
| 1.001 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 300 | kg | - | - |
| 1.002 | OD159675/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 MPa steel grade, 5?7 microns epoxy primer on both side of the sheet and polyester top coat 15?18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55 mm) with EPDM seal, complete upto any pitch in horizontal, vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Modified 12.50) | 90 | sqm | - | - |
| 1.003 | OD460711/2025-2026:Providing and fixing 200 mm dia UPVC gutter ( semi hexagonal ) on ms flat iron welded to roof truss including cost and conveyance and labour charges etc complete. | 10 | metre | - | - |
| 1.004 | 10.5.2:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece | 7.2 | sqm | - | - |
| 1.005 | 9.63.2:Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel
type) with necessary screws etc. complete : (Copper oxidized as per IS : 1378)200x10 mm | 2 | no | - | - |
| 1.006 | 9.76:Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | 2 | no | - | - |
| 1.007 | 9.100.2:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm | 2 | no | - | - |
| 1.008 | 50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop | 2 | no | - | - |
| 1.009 | OD159896/2026-2027:Mancoolie | 4 | Day | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.07 MB
BOQ_1477022.xls
BOQ • 0.30 MB
254sbd.pdf
Tender Documents • 1.80 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .