Lohanapara Heritage Precinct- Street Development Morbi

description with in site area. Rate to be inclusive of all materials, fabrication works,

required for removing and refixing baricading with in site area, foundation works,

transportation, loading, unloading, installation, dismantling etc. The barricading

provided shall be retained in position at site continuously i/c shifting of barricading

from one location to another location as required during the execution of the entire

work till its completion. Rate include its maintenance for damages, painting, all

incidentals, labour materials, equipments and works required to execute the job.

The barricading shall not be removed without prior approval of Engineer-in Charge.

The barricading provided shall remain to be the property of the contractor on

completion of the work. Blinkers are to be installed on the barricading and rate for

blinkers will be payable as per relevant item. Barricading is to be cleaned by means

of washing with water on a weekly basis or as and when required as per the

instructions of Engineer in charge. Payment shall be made for Sqm area of

366.75 2 barricading sheet and number of shifting from start of work till completion of work. 1258.00 Sqm

Box cutting the road surface to proper slope and camber for making a base for road

work including removing the excavated stuff and depositing on the road side slope

205.35 3 as directed upto 50Mt.lead. 1655.00 cum

Demolition including stacking of serviceable materilas and disposal of unserviceable

1020.6 4 materials with all lead and lift. (i) R.C.C. work 5.00 cu.m

Demolition of Brick work and stone masonry including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement

530.78 5 Mortar. 5.00 cu.m

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose

187.43 6 or soft soiL 6055.00 cu.m

Removal of existing any type of paving or paving stones of any type, any size, any

thickness in required depth including removing paver with spil sub base

and breaking sub base i.e concrete or metaling etc under the supervision of

concerned department, disposal unserviceable material with all lifts and up to

any lead at non objectional place and stacking the serviceable material (paver) upto

any private or corporation Land (if corporation land is used then contractor to pay

rent to the corporation) store including loading, unloading as directed by Engineer-

27.44 7 in-charge. : paver blocks at the chowks 50.00 sqm

Removal of existing Light Poles/ telephone pole/ electrical pole/ signage pole with

fixtures/ signage sheet/ac units all cabling work including excavation, Breaking

concrete foundation under the supervision of concerned department, disposal

unserviceable material with all lifts and up to any lead at non objectional place and

stacking the serviceable material upto any private or corporation Land (if

corporation land is used then contractor to pay rent to corporation) store including

5339.29 8 loading, unloading as directed by Engineer in-charge. 5.00 No.

Suppliying of graded stone aggregate of following sizes (for W.B.M. Road)(3)

Crushed stone aggregate for Hard Quality up to 63 mm size- upto 250mm and

405 9 350mm near otla/footpath 1816.50 cum

201.96 10 Supplying of brick aggregate 40mm nominal size- upto 150mm 908.25 cum

Spreading the stone aggregate for rolling and W.B.M. including filling the interstices

to required camber and gradient (excluding spreading of Blindage)(ii) 40mm to

247.28 11 63mm size aggreagates (H.B.) 908.25 cum

Preparing surface by Brushing with wire brushes for removing caked mud etc.

sweeping with brooms and finally fanning the cleaned surface with gunney bags to

28.04 12 remove all loose dirt etc.(i) Water bound macadam surface (New) 6055.00 Sqm

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand

broken stone aggregates 40 mmnominal size) and curing complete excluding cost of

2928.6 13 formwork in (A) Foundation and Plinth - 100mm 605.50 cum

Bitumen Impregnated Geotextile (Providing and laying bitumen impregnated

geotextile layer after cleaning the road surface, geotextile conforming to

requirements of clause 700, laid over a tack coat with 1.05 kg per sqm of paving

grade bitumen 80-100 penetration and constructed to the requirement of clause

Providing and laying controlled cement concrete M.150 and exposed work with

curing etc. complete including the cost of formwork but excluding the cost of

reinforsement for R.C.Cwork in (iv) Slabs having more than 13 cm and upto

6349.35 15 cm.thickness 432.00 cum

Providing and placing in position FE 500D TMT bar reinforcement including cutting,

71883.03 16 bending, hooking, and tying complete as per detailed drawing.(A) Solid Slab. 33.91 MT

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars

for culverts carrying heavy traffic as per IS 458-1991 specifications including setting

the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following

1164.84 17 internal daimeters.(ii) 450mm dia. - sewer and rainwater drainage lines 1260.00 Rmt

Ductile Iron Pipes with internal cement mortar lining and external Zinc coating with

finishing layer of Bitumen; manufactured, tested and duly marked in strict

accordance with and confirming to IS: 8329/2000 (as per latest amendment);

suitable for push-on Jointing, along-with one number Rubber Gaskets for each

length of pipe (EPDM Gasket as per IS: 5382/1985). (Class-K7) For 450 mm Dia.-

5227 18 water supply 1260.00 Rmt

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating

the fault all over the run and back filling the same and making the surface as normal

54 19 ground. 1258.00 rmt

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene (conforming to IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for laying of cable below ground /

111 20 road surface for enclosing cable. (c). 90 mm outer dia. - private connections 1260.00 Rmt.

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including

1997.22 21 500mm x 450mm C.I. horizontal grating wih frame complete. 12.00 no.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick

with Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of

neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-

Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete

including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size 560mm diameter total weight of cover and frame

to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With

230mm thick walls of brick msonry using brick having crushing strength not less than

35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth

19139.07 22 1.50 Metre for 150mm diameter sewer. 25.00 each

Covering of cable with second class bricks or cement tiles laid cover the cable

crosswise & also on both sides with covering of 7.5 Cm. layer of sand above & below

120 23 cable (16 bricks per meter) 1258.00 Rmt

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

129.1 24 disposited layer by ramming and watering 1513.75 cu.m

Filling in plinth with sand under floors including watering ramming, consolidating

438.11 25 and dressing complete 833.00 cu.m

79.86 26 Filling around the pipes with murrum including dressing, tampering etc. complete. 113.20 cu.m

Supply of Dished Channel of VYARA make, as per the below profile drawing,

manufactured on Vacuum Wet Press Machine with hydraulic pressing of wet

concrete mixture to a minimum of 400 tons with simultaneous vacuuming, using

ECO filters with pimple finish. Brand name of the vendor should be embossed on the

900 27 back side of every piece. size: 600x300x125mm 2100.00 per piece

Providing and laying multi-colored stones like Mandhana, black kadappa, leather

finished kota stone and rajula stone with avg. thickness of 30mm, in 1:6 cement laid

over and jointed with groove and spacer and white and grey cement slurry mixed

2034.24 28 with pigments to match the shade of the floorng etc. in the outdoor plaza areas. 5015.00 Sqm

Providing and Installaiton of Multicolour rought cut cobble stones 100x100x60mm in

1:4 cement mortar with 6mm goorves upon 50mm pcc bedding concrete and 50mm

sand bed including installation as per pattern and design including cutting to shape,

1574.24 29 curing and cleaning complete as per the instructions of Engineer in charge 1040.00 Sqm

Supplying and fixing cat eye made out from Acrilo beautile sterine injuction high

compressed molding with reflector made of MMC (prismatic type of size 12cm x 6cm

x 2.5cm) provided with bituminous adhesive 100g. with each unit for fixing. (High

372 30 Intensity grade) 20.00 no.

Solar Stud: Supplying of Solar Raised Pavement Markers made of polycarbonate

molded body with circular shape, solar powered, LED self illumination in active

mode, 360 degree illumination and reflective panels with micro prismatic lens

capable of providing total internal reflection of the light entering the lens face in

passive mode. The marker shall support a load of 20000 kg tested in accordance to

ASTM D 4280. The marker should be resistant to dust and water ingress according to

IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color

of lighting could be provided in red or yellow (amber) as per requirement and typical

frequency of blinking is 1 Hz. There should be current losses of less than 20 micro-

amperes at 2.4 V in sleep-charging mode to enhance the life of the marker and a full

charge should provide for a minimum autonomy of 50 hours. The height, width and

length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the

surface diameter of the marker shall not be less than 100 mm respectively. The

weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes

on the road for the shanks to go inside, without nails and using epoxy resin based

adhesive as per manufacturers recommendation and complete as directed by the

2068 31 engineer 20.00 Each

Providing and laying cement concrete tactile tiles of size 300 x 300 x 25 to 30mm of

Vyara, Super, Nishu, etc or equivalent of approved make and pattern having water

absorption not over 6% and conforming to IS: 13801:1993, of approved make,

pattern and shade (with UV light resistant colours from Lanxess

only) in outdoor floors such as footpath, court yard, multi modals location etc., laid

on 30 to 40mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand)

in all shapes & patterns including grouting the joints with white cement mixed with

812.09 32 matching pigments etc. complete as per direction of Engineer-in-Charge. 377.40 sqm

Earthing: Providing earthing stations for equipment earthing as shown and specified

in drawing for equipment complete with : Supplying & erecting earth pit of

minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications. (a) For Electrical Installation up to 440V in

5363 33 normal soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg 50.00 No.

Pole to luminaire internal connections: Supplying & erecting XLPE(IS:7098)(1)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

115 34 (A) 2 core 2.5 Sq. mm 250.00 Mtr.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size: (A) With

140 35 medium class Rigid PVC pipe and accessories: (f) 4 wire 2.5 sq. mm 1400.00 Mtr.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for

PVC insulated armoured cable complete with out going tails, insulating tape etc for

37 36 following size of cables.: A) 2 to 4 core 2.5/4 Sq. mm 100.00 each

Solder less crimping type Copper lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved manner: (A) 1.5/2.5 to

9 37 Sq.mm 200.00 each

21) Foot Light as per colour requirement with concealed box, modular accessories,

acrylic glass cover with suitable LED watt with all accessories as per following

353 38 module: a) two modules cat iii 100.00 each

Supplying & erecting Galvanized M.S pipe post ‘B’ class 88.9 mm O.D 4 mtr. Long

duly painted with two coats of aluminium paint complete with metallic base plate of

300 mm x 300 mm x 4 mm thick for using as a compound light pole with approx.

3768 39 weight 32 Kg. 50.00 Each

Supplying and erecting C.I. pole base suitable for following size of pole with M.S.

door having two hinges welded on M.S. flat 25 x 3 mm which is fitted on C.I. base by

bolts welded inside the pole base erected with one coat of Red oxide and two coat

of Aluminium paint and covering the gap between pole and pole base with suitable

3450 40 clamp as per SOR drawing or sample. 50.00 each

Providing and erecting decorative wall bracket fittings complete with LED lamp and

rust free fittings components mounted in chrome finish housing with holder,

clear/opaque glass diffuser complete erected with lead wires with minimum

wattage capacity as per instruction engineer incharge/architect/authority. cat-III (TO

2000 41 BE WELDED TO POLE) 50.00 Each

Flexible LED strips with optimum brightness & uniformity of light for perfect cove

280 42 lighting. IP65 MIN. 7.2W 240 LED PER METER 500.00 PER MT.

Providing an installation for roadside signage wall mounted/welded to light pole

using cast iron brackets and fixing a Corten steel-plate of 6mm thickness over it

including laser cut name signage of the monument coated with epoxy paint, as per

21269.15 43 the design issued by the architect incharge 50.00 each

Providing an installtion of tactile information signage in stone masonry work

including shaping and chiselling, embedded with a ceramic plate with multi-colored

graphics glazed after printing min. 6mm thick with 1 backup panel using the fixing

chemicals, within the chase provided in the masonry construction including curing,

25660.53 44 as per the design issued by the architect incharge - Informative 5.00 each

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less

948.68 45 than 35Kg. 25.00 each

Applying priming coat over new steel and other metel surface after and including

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and sand paper with ready

34 46 mixed priming paint brushing red lead. 12.00 sqm

Painting two coats (excluding priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of all dirt, dust and other

86.94 47 foreign matter. 12.00 sqm

Steel work, welded in built up sections framed work including cutting, hoisting, fixing

in position and applying a priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to common rafters and the like. -

8958.28 48 For steel arcade on both the side of streets. 6.00 q

Provision for labour at the disposal of officials from Municipal Corporation for petty

493 49 jobs for , structural, curatorial and miscellaneous works. 210.00 Man days

Provision for skilled worker at the disposal of officials from Municipal Corporation

713 50 for petty jobs for, structural, curatorial and miscellaneous works. 60.00 Man days