SPL REPAIR TO BLDG NO P-7A (UNIT PERS COOK HOUSE AND DINING HALL) OF FD HOSP-I UNDER GE (NORTH) BINNAGURI

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

M&L Vitrified Ceramic tiles light shade 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but n.exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L glazed ceramic coloured / digital printed/Elevation tiles of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting /dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Demolition of wall and ceiling board (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet , complete all as specified and as directed.

S&F Fluted PVC wall panelling to walls as indicated on approved drawings and to the satisfaction of the Engineer-in-charge. Panels shall be manufactured from high grade virgin PVC material, moisture-proof, termite-proof, fire-retardant and UV- resistant, with uniform concave/reeded vertical flute profile. Flute width,panel thickness [5mm-10mm], colour and finish shall be as per approved sample and drawings. panels shall be lightweight, dimensionally stable, and free from warps, cracks, blisters or surface defects. panels shall be fixed to a prepared wall surface or pre-fixed timber/MDF fillet batten framework using approved construction adhesive and / or concealed mechanical fasteners/clip fixing system as reccommended by the manufacturer. complete all as specified and directed by Engr-in-charge

S&F fillet battens to walls as a substrate framework for the installation of fluted wall panelling, as shown on approved drawings and to the satifaction of Engineer-in-charge. Fillet shall be of seasoned timber or MDF sections, free from warping, twisting, splits or defects of size[25mm x 50mm / 38mm x 50mm] or as specified, fixed horizontally and/or vertically to the wall surface at maximum [400mm/600mm] centers, or as required to suit the panel joint layout and manufacturers instructions. Fillets shall be fixed to wall using appropriate rawl plugs and screws, coach bolts or powder-actuated fasteners into masonary/concrete backgrounds, ensuring all batten are plumb, level and true to plane. complete all as specified and directed