M/o Drain (Fixing of F.R.P. Drain Cover repair of Granite, Polish at Plazas and fixing Sand Stone for Tikona Park Atta Peer and other misc. work in Sector-18) Noida

Dismantling steel work in builtup section in angle tees flasts and channels including all gusset plates, bolts, nuts, cutting, welding etc.including dismembering and stacking within 50 m lead.

Re-fixing of mild steel railing including all labour, T & P etc. all complete as per direction of E/I.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required . In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Supplying & Fixing composite Fibre Glass Reinforced Polymer (FRP) gratings of 40MM height . Load capacity should be 10 MT for width upto 300MM, 8 to 5MT for width from 300 MM to 450MM and 5MT TO 1 MT for width from 450MM to 600MM of make THERMODRAIN brand as directed by Engineer in charge. Material of the product should conform to IS 1726 and BSEN 124 for load test and permanent set. Average Wall thickness should be 8 mm. FRP shallcomprise of 60% resin and 40% Fibre glass with no filler content. Weight should not be more than 22 Kg/sq. meter. Mesh sizes is 34X34mm. For all dimensions, the allowable size variations should be +/- 2mm. Material of grating should be resistant to sunlight (UV Stabilised), chemical water and sewerage water. It should have high impact resistance, should be flexible and not brittle.

Supplying & Fixing composite Fibre Glass Reinforced Polymer (FRP) L angle size 45x45x4 mm thick for 40mm Gratings of THERMODRAIN make FRP shall comprise of 60% resin and 40% Fibre glass with no filler content. It should be resistant to sunlight (UV Stabilised), chemical water and sewerage water. It should have high impact resistance, should be flexible and not brittle.

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately): Red sand stone - Exposed face machine cut and table rubbed with rough backing 30 mm thick

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm

Grinding of policing of old marble flooring Including grinding machine labour for proper completion of the work as per direction of E/l,

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150.0 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)