WBPWD/AE/BNGSD/eNIT-31/25-26

Stripping off worn out plaster and raking out joints of walls, celings etc.up to any height and in any floor including removing rubbish within a lead of 75m as directed. Ground Floor Front Side

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size)excluding shuttering and reinforcement,ifany, in ground floor as per relevant IS codes. a) Pakur Variety

125mm. Thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth Boundary Wall

Plaster(to wall, floor, ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster

(a) M.S.or W.I. Ornamental grill of approved design joints continuously weld edwith M.S, W.I. Flats and bars of windows, railin getc. fitted and fixed with necessary screws and lugsin ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above. Grill Gate

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and celling including and papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : ii) Laxury Quality

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Out Side Surface

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as permanufacturer's specification and as per direction of Engineer-in Charge to be applied over acrylic primer as required. The rate includes cost ofmaterial, labour, scaffolding and all incidental charges but excluding the cost of primer. b) Premium 100% Acrylic Emulsion

(b)Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(a)Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A)Painting with best quality synthetic enamel paint of approved make and brand including smoothenig surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : (ii) Two coats (white in shade)

(b) On steel or other metal surface : With super gloss (hi-gloss) (iv) Two coats (with any shade except white)

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets includingtwo coats of painting to bracket etc

Supplying, fitting and fixing bib cock or stop cock. (a) (ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model- Tropical / Sumthing Special of ESSCO or similar brand

(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model- Tropical / Sumthing Special of ESSCO or similar.

Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock- 15 mm. (Equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand)

(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model-ALLIED of Jaquar or similar).

Supplying ,fitting and fixing approved brand 32mm dia.P.V.C.waste pipe, with PVC coupling at one end fitted with necessary clamps. (i) 600 mm long

Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long

Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent)

Supplying, fitting and fixing best quality India nmake mirror 5.5mm thick with silver ing as per I.S.I. specifications supported on fibreglass frameof any colour, frame size 550 mm X 400 mm.

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C. (ii) Plastic (hallow type) white

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm

Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 mm with (b) Porcelain of approved make

Supplying, fitting and fixing PVC pipes for under ground work of approved make of Schedule 80 (mediumduty) conforming to ASTMD 1785 and threaded to match with GI Pipes as per IS:1239 (Part-I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted includingcost of allmaterials ,jointingmaterials, cutting pipes, making threads, cutting trenches upto 1.5metre below surface in all sorts of soil and refilling the same as directed complete in all respect.(Payment will bemade on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials. PVC Pipes 20 mm

Supplying, fitting &fixing UPVC pipes A-Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil throughmasonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (i) 75 mm. Dia

Supplying, fittingand fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75mm X75 mm wood enblocks, C.P.waste fittings of 32mm dia.,one approved quality brassC.P.pillar cock of 15mm dia.,C.P.chain with rubber plug of 30mm dia.,approved qualityP.V.C.waste pipe with C.P.nut 32mm dia.,900mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (iv) Angle back wash basin 400 mm X 400 mm size

Supplying, fitting and fixing porcelain soap tray of approved make. (i) Recessed soap tray of size 150 mm X 150 mm

Sub Total

Please Enable Macros to View BoQ information