Material Supply for Various MGNRGS Works

Amount

QUARRY WASTE

STONE AGGREGATE(SINGLE SIZE) 40 MM NOMINAL SIZE

STONE AGGREGATE(SINGLE SIZE) 20 MM NOMINAL SIZE

STONE AGGREGATE(SINGLE SIZE) 10 MM NOMINAL SIZE

COARSE SAND(ZONE III)

PORTLAND CEMENT

HIRE CHARGES OF CONCRETE MIXER 0.25 TO 0.40 CUM WITH HOPPER

VIBRATOR(NEEDLE TYPE 40MM)

FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC FOR MASS CONCRETE

GI trafford profile sheet 0.35mm thick

Bitumen washer

G.I Limpet washer

Galvanised steel J or L hooks 8 mm dia

Solid blocks of size 40x20x10cm

Second class kail wood in scantling

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Fine sand (zone IV)

G.I. Plain washer thick

SECOND CLASS KALI WOOD IN PLANKS

SAFEDA BALLIES 125 MM DIAMETER

TWISTED STEEL / DEFORMED BARS

PVC pipe 63 mm outer dia . 6kgf/cm2

PVC PIPE 40MM OUTER DIA 6 KGF /CM2

STONE FOR MASONSRY WORK

SOLID BLOCKS OF SIZE 30*20*20 CM

WATER THINNABLE CEMENT PRIMER FOR INTERIOR WALL SURFACE, HAVING VOC CONTENT LESS THAN 50 GMS/LITRE

WATER PROOFING CEMENT PAINT

SOLID BLOCKS OF SIZE 30*20*15 CM

MILD STEEL TUBES HOT FINISHED WELDED TYPE

Corner angle 45x45x5 mm 1.50 m long

WELDING BY ELECTRIC PLANT

GALVANISED STEEL BOLTS & NUTS 6MM DIA AND 25MM LONG ROUND HEAD WITH SLOTS

THROUGH AND BOND STONE SIZE 24*24*39 CM

ADJUSTABLE SPAN ESO+SI(2.35-3.40)

BEAM CLAMP 300-380MM (450-1070MM)

CERAMIC GLAZED TILES 1ST QUALITY 300*300 MM IN ALL SHADES DESIGNS EXCEPT WHITE, IVORY, FUME RED BROWN ETC

MILD STEEL SHEETS FOR TANKS

STRUCTURAL STEEL SUCH AS TEES, ANGLES, CHANNELS AND R.S JOISTS

IRON PINTELS INCLUDING WELDDED PIN

MILD STEEL SHEETS WITH BOLTS AND NUTS TO REST ON PINTELS

MILD STEEL HOOKS

FLOAT GLASS SHEET OF NOMINAL THICKNESS 4MM (WEIGHT NOT LESS THAN 10 KG/SQM)

DEHARADUN WHITE LIME

ACRYLIC EXTERIOR PAINT

EXTERIOR PRIMER

VITREOUS CHINA FLAT BACK WASH BASN 630*450MM

15MM C.P BRAS TAP

C.P BRASS WASTE 32MM

C.I BRACKET FOR WASH BASIN AND SINKS

PVC PIPE 15MM OUTER DIA12 KGF /CM2

WALL FORM PANEL 1250*500MM

100 MM CHANNEL SHOULDER 2.5 M LONG

DOUBLE CLIP (BRIDGE CLIP)

SINGLE CLIP

M.S TUBE 40MM DIA

POLYRETHENE BAGS

GALVANISED WIRE MESH OF AVERAGE WIDTH OF APERTURE 1.4 AND NOMINAL DIA OF WIRE 0.63MM

PRECOATED ALUMINIUMTRAFFORD SHEET .450 MM THICK

Wire nails

Epoxy paint

Hydraulic Excavator (3D) with driver and fuel

Hire and running charges of loader

Solid blocks of size 40x20x10cm

G.I pipes 50 mm dia

G.I. pipes 40 mm dia

G.I. Plain washer thick

Polyethylene water storage tank with cover and suitable locking arrangemnet

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 63 mm outer dia. 4 kgf/cm2

PVC pipe 110 mm outer dia 6kgf/cm2

Anjili wood scantls

PVC pipe 50 mm outer dia.6kgf/cm2

K. JAYARAJ