MLASDF 2020-21-Kodungallur LAC-work proposed by Sri V R Sunilkumar MLA-Construction of Mala kizhakke angadi BUS waiting shed

Amount

Construction of Bus Shelter

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

od636110/2020_2021 : Roofing with G.I hard colouur powder coated traffod sheets 0.35 mm thick or nearest<br>available thickness with overlaps of 150 mm at ends and GI hook or crank C.I. bolts and nuts including plain<br>washers and bitumen washers etc complete

od638300/2020_2021 : Supplying and fixing 150mm dia PVC half cut section with brackets at the end of sheet<br>or tiled roof for rain water collection including all cost and materials, conveyance, labour charges etc.<br>complete<br>

50.18.8.7.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2

11.38 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

od636126/2020_2021 : Supplying and fixing at site ALUMINIUM COMPOSITE PANEL(ACP) of approved make<br>and colour certified for exterior applications, 3 mm thickness with 28 to 30 mm microns PVDF coating<br>confirming to ASTM standard with top aluminium skin of 0.25 mm and with a bottim aluminium skin of 0.25<br>mm with service coating of polyeater paint , laminated to acentre core of 2.5 mm single recycled low density<br>polethelene material. The panels shall be cut to sizes of required grid dimensions with the site condition. The<br>panel shall be fixed on prefabricated frame work using 38 mm x 25 mm x 1 mm thick Aluminium extruded<br>sections of approved make joined with standard cleats and fasteners. Te gaps formed between the panels<br>shall be sealed with silicone sealent. The rate inclusive of cost and conveyance of all materials, labour for<br>erection , hire charges of scaffolding, etc. complete .

od638803/2020_2021 : Supplying and fixing acrylic letters of size 10 cm

Road side

11.4.3.1 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203III.P.C.C. grade M 20 (i)Nominal mix (1:2:4)

BIJEESH N C

Bidder Name

BIJEESH N C

NIDHIN JOHN