Construction of New Temples, Restoration of Existing Temples, and Development of Temple Plaza under Tourism Circuit from Saptarshi Ghat to Atal Ghat at Saptarishi Ghat, Riverfront East, Behrampura, Ahmedabad

Price Bid: Bill of Quantities (BOQ)

Tender Amount : Rs.

Contractor's Quoted Rates :

Ahmedabad Municipal Corporation

PLEASE NOTE : PLEASE DO NOT FILL PRICE BID IN HARD COPY.

No. Item of Works Amount in Rs.

B Plumbing Work

C Electrical & ELV Work

Name of Work : Construction of New Temples, Restoration of Existing Temples, and

Development of Temple Plaza under Tourism Circuit from Saptarshi Ghat to Atal Ghat at

Saptarishi Ghat, Riverfront East, Behrampura, Ahmedabad.

SUMMARY(CIVIL WORK)

NO. ITEM OF WORKS Amount in Rs.

2 PLAIN AND REINFORCED CEMENT CONCRETE

4 PLASTERING AND PAINTING

5 WATER PROOFING & CHINA MOSAIC

6 PAVING AND FLOOR FINISHING

7 DOORS & WINDOWS

8 MISCELLANEOUS

9 Construction of Temple Structure

10 Construction of GATE

12 Construction of Moorti

13 Construction of DEEP Stambh

14 Landscape works

NAME OF WORK- Construction of New Temples, Restoration of Existing Temples, and Development of Temple Plaza under Tourism

Circuit from Saptarshi Ghat to Atal Ghat at Saptarishi Ghat, Riverfront East, Behrampura, Ahmedabad.

SCHEDULE OF QUANTITIES

Description of Item Unit Total QTY Rate(Rs.) Amount(Rs.)

Clearing and grubbing road land including uprooting rank vegetation

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of

1 stumps of trees cut earlier and disposal of unserviceable materials. (C) Sq.m 4,725.00 2.81

By mechanical means in area of light jungle

Cutting and felling trees of girth as specified below (measured at a

height of 1 m above ground level) including cutting of trunks and

branches, removing the roots and stacking of serviceable material

2 and disposal of unserviceable materials within campus at directed Nos 5.00 451.00

place etc complete all as per specifications and as directed by the

Engineer-in-charge

Girth beyond 30 cm, up to and including 60 cm girth.

2.1 Girth beyond 60 cm, up to and including 120 cm girth. Nos 5.00 2,011.00

Demolition of Brick work and stone masonry including stacking of

3 serviceable materilas and disposal of unserviceable materials with all Cu.m 200.34 544.95

lead and lift.(ii) In Cement Mortar.

Excavation for foundation upto 1.5 m depth including sorting out and

4 stacking of useful materials and disposing off the excavated stuff upto Cu.m 3,062.14 115.92

50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m including

6 sorting out and stacking of useful materials and disposing off the Cu.m 420.28 141.11

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Uncoursed Rubble Masonry with hard stone of approved quality in

7 foundations and plinth in Cement Mortar 1:6 (1-cement : 6-coarse Cu.m 493.34 2,475.26

sand including levelling up etc. complete

Conveyance charges of earth lime, murrum, building rubbish,

8 manure, garbage, sludge, excavated rock, fly ash, aggregate of any Cu.m 350.00 256.16

kind etc. comp. upto any lead. up to 1.0 km

8.1 Above 1.0km & up to 5 km Cu.m 700.00 326.73

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20cm. In depth

9 consolidating each disposited layer by ramming and watering. Cu.m 379.00 129.10

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

Carring out plinth treatment to pre or post construction / existing

structure by spraying chemical solution for termite control treatment

including labour and material consistment with I.S.I specification.

Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is recommended i.e one litre

11 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of Sq.m 111.55 104.90

one litre chemical emulsion appication at the rate of 5 Litre chemical

/ Sqm of surface is recommended as per I.S and as per directions of

Clerk-of-Work. For all levels and leads.

PLAIN AND REINFORCED CEMENT CONCRETE

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

sand : 6- hand broken stone aggregates 40 mmnominal size) and

12 curing complete excluding cost of formwork in (A)Foundation and Cu.m 369.18 2,976.00

Providing and laying in position Ready Mixed M- 250 grade concrete

for reinforced cement conctere work , using cement content as per

approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a lead up to 10 kms

having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying, excluding the

cost of centering shuttering finishing and reinforcement including cost

13 of admixtures in recommended proportions as per IS: 9103 to Cu.m 613.67 4,853.56

accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 450 kg ) (GRADE SLAB)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

14 bending, binding and placing in position complete upto floor two Kg 92,050.88 75.46

Centering and shuttering including strutting, steel plates stiffened by

15 steel angles, propping etc. and removal of form work for any

height, any floor, any level, any lead and any lift for:

15.1 Foundations, footings, bases of columns, etc. for mass concrete Sq.m 800.00 171.68

Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

Suspended floors, roofs, landings, balconies and access platform.

15.3 Weather shade, Chajjas, corbels etc., including edges Sq.m 2,800.00 252.00

Lintels, beams, plinth beams, girders, bressumers and cantilevers

15.5 Columns, Pillars, Piers, Abutments, Posts and Struts Sq.m 125.80 297.68

15.6 Stairs, (excluding landings) except spiral-staircases. Sq.m 50.00 242.55

Brick work using Modular bricks having crushing strength not less than

35 kg/Sq.m in Sub Structure below Plinth & Super structure above

plinth in cement mortar 1:5 (1 cement : 5 fine sand),finised in plumb,

line & level, with including scaffolding at any lvl. etc complete as

directed by EIC.

Haritage Brick Work using special size Superior Quality well burnt thin

bricks (220 X 105 X 45 mm) having crushing strength of not less than

Kg/sq.cm. in traditional lime sand surkhi mortar 1 : 1 : 1 in proportion in

proper line level using well washed coarse sand including adding

Jaggery (gud), Gugal, Methi in liquid form to a proportion of 2.0 Kg

Jaggery (gud) ,1.5 Kg Methi & 1.5 Kg Gugal in 1.00 Cmt. of

Masonry,including constructing necessary circular shapes and

footings, where required, as per original including all tools,scaffolding

and tackles and pre-soaking of bricks curing etc. complete up to

7.00 mts. height as directed by the Engineer Incharge.

PLASTERING AND PAINTING

Providing 15 mm. thick cement plaster in single coat on fair side of

brick wall for interior plastering upto floor two level finished even and

smooth in [II] Cement mortar 1:4 (1 cement : 4 fine sand) For all levels,

hights and leads of works. etc, complete for all floor heights as

18 directed. Rate shall be inclusive of hexagonal chickenmesh at Sq.m 118.42 155.61

junction of concrete and brick work. Minimum width of the chicken

mesh shall be 150 mm covering the brick / concrete surface equally,

as directed by EIC.

Providing and laying average 20 mm. thick double coat Sand

face/Mala cement plaster on external walls upto any height above

ground level and for all shapes consisting of average 14 mm. thick

backing coat of CM 1:3 (1 cement: 3 coarse sand) and average

mm. thick uniform grained textured finish coat using wooden Gutka,

in CM 1:1 (1 cement: 1 sand),with line , level & plumb, including

19 scaffolding, forming grooves, drip moulds, pattas, hacking RCC Sq.m 50.00 297.68

surface, curing etc. complete. as directed by EIC. Rate shall be

inclusive of hexagonal chickenmesh at junction of concrete and brick

work. Minimum width of the chicken mesh shall be 150 mm covering

the brick / concrete surface equally.

Providing 10mm thick cement plaster in single coat on brick/concrete

ceilings and sofits of stairs upto floor two level and finished even and

20 smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Sq.m 37.87 139.23

Applying two coats of acrylic putty & two coats of primer of

approved brand and manufacture on new wall surface to give an

21 even shade including thoroughly brushing the surface free from Sq.m 118.42 40.19

mortar dropping and other foreign matter and sand papered smooth.

Providing and painting internal walls with two coats of plastic

emulsion paint of approved make & of shade. The rate shall include

for all ladders, scaffolding and supports and including complete

surface preparation, including scraping the surface off existing surface

paint, loose particles and cleaning and applying primer and putty as

necessary to achieve a surface in perfect line and level. Wherever

necessary, POP punning or cement plastering needs to be done as

per site condition, if the plastered surface has chipped off. The final

finished surface should be smooth and in perfect line and level

without undulations on surface. etc. complete as directed by EIC.

Providing, applying and finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required shape even shade

23 after thoroughly brushing the surface to remove all dirt, and remains of loose Sq.m 50.00 113.40

powdered materials.etc complete. as directed by EIC.

Providing & laying broken white china mosaic flooring for plain and

curved surfaces, comprising of 12 to 20 mm. size broken pieces of

white glazed tiles laid over water proofing using cement mortar 1:3

bedding, The flooring shall be tampered to bring the mortar cream

up to the surface, including rounding of the junctions and extending

24 them upto 30 cm. along the parapet wall. The rate shall include Sq.m 48.24 739.89

bands, if different colour is used, any pattern or design as per drawing

and direction, curing, cleaning with water and oxalic acid, etc.

complete. as directed by EIC.

Providing and laying integral cement based waterproofing treatment

of the agency approved by department, including preparation of

surface as required for treatment of roofs, terraces etc mixing with

waterproofing compound as per IS:2645, with average thickness of

115mm and minimum thickness at drain point as 65 mm. Following

works are included in above item

(i) Applying and grouting a slurry coat of neat cement using

kg/sqm. of cement admixed with proprietary water proofing

compound over the RCC slab including cleaning the surface before

(ii) Laying cement concrete using broken bricks/brick bats 25 mm to

25 100 mm size with 50% of cement mortar 1:4 (1 cement : 4 coarse Sq.m 48.24 1,425.00

sand) using Ready mix mortar admixed with proprietary water

proofing compound over 20 mm thick layer of cement mortar of mix

1:4 (1 cement : 4 coarse sand) using Ready mix mortar admixed with

proprietary water proofing compound to required slope and treating

similarly the adjoining walls up to 300 mm height including rounding

of junctions of walls and slabs.

(iii) After two days of proper curing applying a second coat of

cement slurry admixed with proprietary waterproofing compound.

(iv) Finishing the surfaces with 20 mm thick jointless cement mortar of

mix 1:4 (1 cement : 4 coarse sand) using Ready mix mortar admixed

with proprietary water proofing compound and finally finishing the

surface to receive the China Mosaic waterproofing treatment.

(v) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

operations to be done in order and as directed and specified by the

Engineer in Charge.

Providing and laying water proofing treatment to vertical and

horizontal surfaces W.C., Bath & Kitchen and the like consisting of:

1st course of applying cement slurry @ 4.4.Kg/sqm mixed with water

proofing compound conforming to IS:2645 in recommended

2nd course of cement plaster 1:4 (1 cement : 4 coarse sand) using

Reday Mix Mortar mixed with water proofing compound in

recommended proportions, 20mm thick up to finished floor level and

26 15mm thick above finished floor level up to 600 mm. Sq.m 38.54 650.00

3rd course of applying blown or residual bitumen applied hot at

Kg per sqm of area.

4th course of 400 micron thick PVC sheet (Overlaps at joints of PVC

sheet should be 100 mm wide and pasted to each other with bitumen

@1.7 Kg/sqm) etc complete all as per specifications and as directed

by Engineer-in-Charge.

PAVING AND FLOOR FINISHING

Providing & laying machine cut Polished & Flamed finish 30mm thick

Granite Stone Flooring of approved color at all floor & location in

necessary cement mortar bedding /backing, close jointed & grouted

with matching cement slurry and rounding of edges, finished to line,

level,curing etc. as required, including cutting of stone slab, wastage,

making cut outs, grooves wherever required, etc. complete all as per

specifications, drawings and as directed by the Engineer in charge.

Note: Top exposed surface on plan & exposed vertical finished face

shall be measured for payment in Sqm. (for Granite stone manhole

cover if required, punch given as per architect's drawing)

In flooring with machine cut & Flamed finish Granite stone of size and

pattern as per drawing laid over & including 20mm thick cement

mortar1:4 ( 1 cement : 4 coarse sand) bedding. (Using ready mix

mortar) including cement slirry at 4.40 Kg/Sqm over bedding and

27.1 matching slurry with white cement at 2.20 Kg/Sqm for grouting the Sq.m 2,175.60 4,050.00

joints. (Including Steps) (for Granite stone manhole cover if required,

punch given as per architect's drawing)

In flooring with machine cut & polished finish Granite stone 30mm

thick of Floreal pattern, Water Jet Spray cut, of size and pattern as per

drawing, laid over & including 20mm thick cement mortar 1:4 (1

cement : 4 coarse sand) bedding (using ready mix mortar), including

27.2 cement slurry at 4.40 Kg/Sqm over bedding and matching slurry with Sq.m 105.80 5,500.00

white cement at 2.20 Kg/Sqm for grouting the joints. (for Granite stone

manhole cover if required, punch given as per architect's drawing)

18-20 mm thick one side machine polished granite stone of approved

colour, shade and surface finish for cladding/ dado/skirting/lift jamb

/Facia/Window sill with stone slabs of various sizes in pattern including

12 mm thick 1:4 cement mortar (Using ready mix mortar) backing,

fixing of 6mm (approx.) size angular stone chips to the backside of

granite after applying araldite to the unpolished surface of the granite

27.3 to create a surface suitable for proper bond with backing and filling Sq.m 137.55 2,850.00

the space between granite and backing with cement slurry including

adequate curing etc. complete as directed and including rounding

& polishing all exposed edges in semicircle / chamfering / or as per

drawing & as ditected.

Providing and fixing Dhangadhra stone wall lining of approved shade

and texture, machine cut, with as specified thickness in drawings, up

to 10m height, fixed with special adhesive over 12mm thick cement

28 mortar 1:3 (1 cement : 3 coarse sand) bedding, including pointing in Sq.m 789.35 5,500.00

white cement with admixture of pigment to match the stone shade,

complete as per drawing and direction of Engineer-in-Charge.

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1 cement : 6 coarse sand) or

29 L.M. 1:1.5 (1 lime putty : 1.5 - coarse sand) laid and jointed with gray Sq.m 132.71 2,194.63

cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick

Providing & laying at all floors & locations Homogeneous Full body

Vitrified tile/ Glazed vitrified tile/ Anti Skid Vitrified tile double charge/

multi charge (Glossy /Matt/ Satin)/ approved manufacturers of sizes

600 mm X 600mm / 800mm X 800mm / 1000 mm X 1000 mm size or as

per approved size and having mimimum thickness 8.5 mm or as

specified by approved manufacturer tiles conforming to IS:15622

having water absorption less than or equal to 0.08% (Group B I a), in

flooring/ skirting/ dado/ cladding / staircase tread/ riser at all floors

and location, heights/ levels and lead in approved pattern and

colour, shade laid over cement mortar bedding/ backing/ adhesive

30 backing, including cleaning and preparing the surface for

bedding/backing, spreading the neat cement slurry, close jointed

and grouted with matching coloured readymade cement grout and

approved pigment as per manufacturer's specifications, finished to

level, line, slope and plumb, cutting of tiles, wastage, making

openings / cut out if neccesary, final cleaning of surfaces, curing etc.

all as per drawings, specifications & as directed by Engineer in

In flooring using Glazed vitrified tile Matt / Anti Skid Finish of size

mm X 600 mm laid over 20 mm thick cement mortar1:4 bedding

(using reday mix mortar) and spreading neat cement slurry by using

minimum cement about 2 kg/sqm prior to bedding and spreading

cement paste using minimum cement of about 4.50 kg/sqm over

bedding,, and including Providing and laying Durafloor protector XF

mm thick sheet of approved make and brand over the whole vitrified

tile / stone flooring area along with removing and cleaning the same

30.1 before handing over without damaging the finished surface & making Sq.m 37.87 1,383.99

good the damages, if any etc and including Providing in flooring &

skirting 3 mm thick and 8.5 mm deep grout line using PVC spacers for

creating true alignment and gap between vitrified tile work, if shown

in the drawing & the 3 mm spacer joints filled with approved cement

based tile grout including all labour material, wastage complete.

In dodo / skirting / cladding / sloped skirting laid over 12 mm thick CM

1:4 (1 cement : 4 sand, using reday mix mortar) backing, including

30.2 providing grooves as per drawing on top of skirting. ( Using AntiSkid Sq.m 88.98 1,575.00

vitrified tiles or Double charge vitrifed tiles )

Providing & laying machine cut machine polished natural stones as

mentioned for the followings for kitchen / Basin platform topping,

counter topping and facia over and including necessary cement

mortar for backing / bedding, close jointed and grouted with

matching cement slurry and finished to line, slope, level, plumb,

curing etc, as required including cutting of stone slabs, wastages,

31 making cut outs wherever required etc all as per specifications and as

directed by the Engineer in charge. Notes : 1) Verticals, shelves,

platform shall be embedded minimum 25 mm in wall/ flooring. 2) Top

exposed surface on plan & exposed vertical finished face shall be

measured for payment in sqm.

For kitchen / Basin platform top, Vertical support for Counter, upto

mm wide and maximum length upto 1.80 m in single piece consisting

machine cut machine polished 35 mm thick cuddappah stone at

bottom and mirror polished machine cut 18mm thick Jet black/

approved Granite stone at top fixed with 47 mm thick 1:3 cement

mortar (Using ready mix mortar), between two stone slabs (Double

stone slab sandwitch type) including providing cut out if any,

moulding and polishing the edges etc complete.

For kitchen platform horizontal & vertical facia upto100 mm wide

machine cut machine polished on one side 18 mm thick Jet black/

31.2 approved Granite stone fixed with epoxy resin base (Araldite Sq.m 5.00 3,797.00

adhesive orequivalent) including round moulding and polishing the

edges etc complete.

Providing and fixing 80 mm thick (min.) factory made paver blocks of

specified finish (shot blasted), approved make and colour, shade,

size, shape laid in pattern manufactured with cement concrete grade

not less than M-40 and conforming to IS:15658, including providing &

laying 20 mm thick bedding of cement mortar (using ready mix

32 mortar having cement: sand, 1:4) finishing to line, level and slope, Sq.m 362.84 1,400.00

finally filling the joints with matching cement mortar and cleaning the

surface etc. complete all as per specification and as directed by the

Engineer- in- Charge.

Providing and fixing 60 mm thick (min.) factory made paver blocks of

specified finish (shot blasted, pneumatic compressed), approved

make and colour, shade, size, shape laid in pattern manufactured

with cement concrete grade not less than M-35 and conforming to

IS:15658, including providing & laying 20 mm thick bedding of cement

33 mortar (using ready mix mortar having cement: sand, 1:4) finishing to Sq.m 384.16 1,250.00

line, level and slope, finally filling the joints with matching cement

mortar and cleaning the surface etc. complete all as per

specification and as directed by the Engineer- in- Charge.

Providing and fixing Pre cast Kerb blocks of various types (Half Batter,

Bull nose, Flat, offlet, Transition, Dropper, etc,.) and size of

600x450x150mm steel mould Vaccum wet pressed for connecting

roads, pathway-prominade area and other area with true line & level,

including grading, geometrical shapes in curves, circles etc. at

respective finish level etc. completed as specified in drawing and

34 specification. It shall be of CC- M25 grade of concrete and fitted and RMT 302.32 1,762.00

jointed in C:M 1:1 with throughly curing, rendering with cement slurry,

cleaning the joints neatly etc. completed as directed by EIC. It allows

to satisfy respective IS-codes for materials, manufacturing process

and test results.

DOORS & WINDOWS

Supplying & fixing in position the following type solid core block board

flush door shutter (Single/ double leaf) with commercial ply facing /

prelamination on both sides conforming to IS 2202 (Part-1) of

approved make & brand with external / internal type second class

teak wood lipping alround of required width and depth (20 minimum

thickness all around) of shutter as per IS/as specified, fixing shutters in

position to HMPS door frames/ wooden frames/ granite frame works

(door frames shall be paid separately under relevant item) at all floors

35 by cutting/ planing if necessary including labour for fixing of the

fittings & fixtures as per drawing with wooden packing pieces if

necessary (but excluding the cost of fittings and fixtures with SS screws

which shall be paid separately under relevant item), including view

panel wherever required as per drawing, finishing as specified all as

per specifications, drawings and as directed by Engineer In Charge.

35 mm thick flush door shutter, With 1.0 mm thick decorative laminate

35.1 sheet of approved colour, pattern & shade fixed on both faces of Sq.m 4.79 3,500.00

Providing & fixing Hollow Metal Pressed steel (HMPS) door frames of

following profile fabricated out of 1.60 mm thick G.I sheet of coating

(Class VIII of zinc coating) 120 gram/sqm, manufactured by Sail /

Lloyds/ Jindal or equivalent of profiles / size generally conforming to IS

4351-2003 with suitable one/two set rebates for fixing shutters and also

rebate suitable for fixing fixed glazing including hole for self tapping

screws wherever shown in the drawing, each frame to contain hinge

jamb, lock jamb and head all rigidly fixed together with welded

/mechanical joints with back plates /angles to correct shape &

angles including providing and fixing base ties with GI channel

50x25mm, 1.25mm thick suitable section to suit floor thickness / angle

thresholds with MS angle 25x25x3mm, 6nos. of adjustable lugs per

frame, providing and welding of 40x40x5mm,150mm long angle

cleats for hinges with necessary tapped holes for fixing counter sunk

headed machine screws to suit heavy duty oxidised / stainless steel

hinges of size 125mm x 65mm x 2.8mm/125mm x 76mm x 2.80mm/

100mm x59mm x2.6mm/75mm x 48mm x 2.45mm or shop type

welding and self taping screw for fixing hinges/ piano hinges etc.

and finishing the same to smooth etc. (but excluding the cost of

hinges which shall be paid under the relevant item) including

providing each door frame with necessary lock strike plates, mortar

guards, buffers, bushes etc. required for tower bolt/ baby latches,

tadis, safety chains, aldrops etc including fixing the frame to

brickwork/ concrete work with necessary PCCor bolted/ screwed to

concrete work, painting a shop coat of polyurethane paint including

etching the surface with ETCH primer etc. including painting the

exposed surfaces with two coats of synthetic enamel paint of

approved make and colour over a coat of red oxide/ zinc chromate

primer and painting the unexposed surfaces with two coats of anti

corrosive bituminous paint, after rectifying the damaged PU primer

due to transport including filling the hollows of door frame with

C.C.1:2:4 using 12 mm size downgraded stone aggregate, curing,

finishing etc. all complete as per drawings, specifications and as

directed by Engineer in charge.

Note: The quoted rate shall include cost of base tie / angle and all

accessories mentioned in the item description except iron mongeries

(i.e. fittings and fixtures with wood and machine/ self taped screwsas

required, which shall be measured and paid separately under

relevant item.)

Profile 90mm x 60 mm with single rebate for doors.

Providing and fixing aluminium die cast body tubular type universal

hydraulic door closer of approved make conforming to IS: 3564 with

ISI mark including necessary accessories and screws etc for fixing with

37 alumnium/ wooden/ steel doors with necessary bolts & nuts, labour, NOS 2.00 1,250.00

scaffolding etc complete all as per specifications and as directed by

the Engineer-in-charge.

Providing, fixing & Supplying at site of work approved quality and

manufacturer, confirmed & marked with relevant IS (wherever

applicable), Stainless steel (SS-304) fittings, fixtures and fastenings

along with Stainless steel screws/concealed SS screws, bolts, nuts,

washers,wooden packing pieces if necessary etc.and other

accessories etc complete all as per specifications and as directed by

the Engineer-in-Charge.

SS But hinges (Heavy Weight) of size (100 X 75 X 3.0 mm) , ball bearing

type, (Two / Three leaf Hinges)

Providing, fixing & Supplying at site of work approved quality and

manufacturer, confirmed & marked with relevant IS (wherever

applicable), Stainless steel (SS-304) fittings, fixtures and fastenings

along with Stainless steel screws/concealed SS screws, bolts, nuts,

39 washers,wooden packing pieces if necessary etc.and other NOS 2.00 330.00

accessories etc complete all as per specifications and as directed by

the Engineer-in-Charge.

S. S. Tower bolt 300 mm long x 12 mm barrel

GRAB HANDLE FOR ADA TOILETS:

Providing & fixing 25 mm diameter (1.5mm thick) SS 304 satin (brush)

finish Grab handle for disabled toilet door of 600mm long of

40 approved make with necessary SS 304 grade screws etc. complete as NOS 2.00 1,000.00

per drawing as sample approved by Engineer-in-charge.

Providing and fixing Mortise shaft dead bolt with key (Alen Key lock)

with 57mm backset and 25mm square forend in stainless steel satin

41 finish of approved make including all labour, material etc complete NOS 1.00 400.00

all as per specifications and as directed by the Engineer-in-Charge.

Providing & Fixing 6- lever Mortice lock of chromium plated SS-304

parts & body of approved brand & make, 200 mm Handle Set Lock

Body CK mortice lock with chromium plated SS screws, with duplicate

42 keys etc. lock shall be fitted as per manufacturer specification and as NOS 2.00 900.00

directed by Engineer in charge.

Fabricating, supply and erecting in position Standard Structural steel

sections conforming to IS 2062 for all structural steel works using ISMB,

ISA, ISMC, MS plate, flat, square bars, pipe, square pipe ,etc. including

welding, cutting, wastage, etc. complete. The rate is inclusive of

welding road, supply & fixing of correct size nut, bolts, washers, paint,

with all contractor's materials, labour, tools & plants, in bolted /

welded construction as directed by Engineer-in-Charge. Anticorrosive

paint must be applied before applied any paint. The rate shall

inclusive of providing and applying Epoxy Coating of approved

shade, brand and manufacture on new structural steel work with one

43 coat of 30 micron (DFT) of Epilux 4 Zinc Rich primer of Berger Paint KG 25,000.00 117.35

India Ltd or equivalent as primer and Two coat each of 35 micron

(DFT) of Epilux 84 High Gloss CR enamel of Berger Paint India Ltd or

equivalent at all levels. (Total DFT is 30+35+35=100 microns). The waste

cut pieces shall not be included in the paying quantity. The work shall

be done as per drawing and specification. The work shall be carried

out as per IS:800, IS:816 with its latest amendments.

Supplying, providing, placing, installing and fixing in position in true

line and level as per detail drawing approved by EIC, MODULAR

TOILET PARTITIONS along with specified brand or approved equivalent

of size as per detail drawings, Floor mounted including providing and

fixing all accessories, fixtures, fastenings, hinges, anchorages, all

hardware with approved locking arrangement as recommended by

manufacturer and as approved by EIC etc. complete as directed, at

Item description:

Cubicle size - 900mm x 1550mm x 2100 mm (height is including

mm gap from bottom).

Colour of Boards : As per the Shade card - approved by EIC. Thickness

of Compact Sheet : 12mm (min.). Material:Compact Laminate in

44 panels. Made from solid grade compact high-pressure laminate as EACH 6.00 34,200.00

per IS:2046 and EN438- manufactured under high specific pressure >

MPa and temperature 120° C with bunch of kraft papers impregnated

with thermosetting phenolic resin and decorative papers made of

cellulose fibre impregnated with thermosetting melamine resin which

provide superior scratch, abrasion, heat, chemical, impact, graffiti &

moisture resistance along with anti-bacterial properties. Panels have a

black core that when machined, presents a distinctive black edge.

Size of panels to be as per drawing.

Door size - 1750 x 600(H X W).

All doors will be of single colour and made of 12 mm thick HPL

compact panel. The doors will have chamfered edges. Each door will

be supported by 3 stainless steel made hinges affixed to the pilasters.

Stainless steel made coat hook and Lock set (comprised of Thumb

turn and occupancy indicator) are provided with each door. All the

doors will be routed at the vertical ends and the rubber sponge lining

will be incorporated at the routed ends.

Pilaster dimension - 1830 x 300 (H X W).

All pilasters will be made of 12 mm thick HPL compact panel with

chamfered edge and completed with stainless steel made thumb

turn lock set. Pilasters will be anchored to the floor using stainless steel

made adjustable legs. All pilasters will be routed at their vertical ends

to facilitate closure of doors. The bottom gap is 150-100 mm.

Dividers - 1775 x 1550 (H X W)

All intermediate partitions or dividers will be made of 12 mm thick HPL

compact laminate panels. They are affixed with stainless steel made

U-channel at their ends for ultimate stability of the system.

Hardware and Accessories Details : below mentioned all accessories

– Stainless Steel - 304 Grade

a) Adjustable Pedestal Footing of base diameter 60 mm made from

Stainless steel grade 316 giving an adjustable height of 100mm to

150mm. Surface finish to be matt type.

b) SS U -Channel

c) SS F Channel

d) SS Door Stopper Channel

e) SS Top Rail with circular cross section (Diameter 32mm). Surface

finish will be mirror type.

f) SS Coat Hook with rubber stopper made from Stainless steel grade

304. Surface finish to be lacquer type.

g) SS Privacy Thumb turn c/w Occupancy Indicator made from

Stainless steel grade 304. Surface finish to be lacquer type.

h) Round Door knob diameter 30 mm with grooves for better hand

grip made from Stainless steel grade 304. Surface finish to be matt

I) SS Spring Loaded Butt Hinges with Cover

j) Anti-noise rubber padding of thickness 2 mm and width 10 mm

k) Screws & Wall Plugs. Stainless steel grade 304 screws.

l) Tubular panel holder made of stainless steel grade 304. Surface

finish will be lacquer type.

m) Corner joinery section made from Stainless steel grade

Surface finish to be brush type. A thin plastic film pasted for surface

protection. Size to be 35mm x16.4mm x 0.8 mm.

n) Wall joinery section with hamming profile made from Stainless steel

grade 304. Surface finish to be brush type. A thin plastic film is pasted

for surface protection. Size to be 21mm x 16mm x 0.8 mm.

Supplying, providing, placing, installing and fixing in position in true

line and level as per detail drawing and approved EIC, Modular Toilet

Urinal partition UMP along with specified brand or approved

equivalent of size as per detail drawings, Colour of Boards : As per the

Shade card - approved by EIC.

Item description:

The Urinary Panel has a 12 mm thick High Pressure Laminates (HPL)

Compact Board, with a recommended panel width dimensions of

45 400-500 mm. The size of the panel is 500 mm (W-Top) X 400 mm (W- EACH 3.00 5,750.00

Bottom) X 1200 mm (H), with the overall height of 1200 mm. Final Size

of Partitions : As per drawing given - shop drawings approved by EIC.

Accessories Details : below mentioned all accessories –

Stainless Steel - 304 Grade made 2 brackets used to fix each urinal

panels to the walls.

Construction of Temple Structure

Earth work in excavation in foundation trenches or drains

including dressing of sides and ramming of bottoms, with all lift,

including taking out the excavated soil and depositing and

46 refilling of jhiri with watering & ramming and disposal of surplus Cu.m 287.98 115.92

excavated soil as directed with in lead of 50mtr.

All kind of soil-1.5m

Earth work in excavation in foundation trenches or drains

including dressing of sides and ramming of bottoms, with all lift,

including taking out the excavated soil and depositing and

47 refilling of jhiri with watering & ramming and disposal of surplus Cu.m 180.16 128.52

excavated soil as directed with in lead of 50mtr.

All kind of soil-1.5m to 3m

Conveyance charges of earth lime, murrum, building rubbish,

48 manure, garbage, sludge, excavated rock, fly ash, aggregate of any Cu.m 46.81 256.16

kind etc. comp. upto any lead. up to 1.0 km

48.1 Above 1.0km & up to 5 km Cu.m 93.63 326.73

48.2 Above 5.0 km & up to 10.00 km Cu.m 327.70 363.78

Random rubble stone masonary for foundation and plinth in

49 cement sand mortar above 30 cm thick wall in:Cement Mortar 1:4 ( 1 Cu.m 210.68 2,475.26

cement : 4 Sand )

Supplying and Filling in plinth with blown sand under floors including

50 watering ramming consolidating and dressing complete including Cu.m 86.65 455.63

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) for grading of

roof surface to required slope for effective drainage, including mixing

of approved waterproofing compound in required proportion by

weight of cement as per manufacturer’s specification, placing in

51 position, compacting, finishing smooth, curing and all other operations Cu.m 107.02 3,661.30

complete as per drawing and direction of Engineer-in-Charge. Rate

to include cost of materials, labour, tools, equipment, curing,

scaffolding, and all incidental charges complete in all respects.

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for KANPIT,

PLINTH, MANDOVER work in 1:3 cement sand mortar and jointed in

white cement to match the colour of the stone. Joints of stone to

be not more than 1/8 inches and depth upto stone sizes, all visible

angles and edges to be straigth and free from chipping, work shall

be strictly in plumb line and level including providing dowelling and

jointed by copper metel damps of suitable size and as per drawing

52 and design for BIG Temple and finished / fixed as per directions of E Cu.ft 4,260.00 999.00

in C. Work will be as per sample (for carving depth) and pattern

( class and style) as for BIG TEMPLE - AMC HERITAGE SITE

(AHMEDABAD). Work to be carried out as per approved

Drawing which is PROVIDED BY ARCHITECT in full scale.

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for PILLAR

work in 1:3 cement sand mortar and jointed in white cement to

match the colour of the stone. Joints of stone to be not more than

1/8 inches and depth upto stone sizes, all visible angles and

edges to be straigth and free from chipping, work shall be strictly in

plumb line and level including providing dowelling and jointed by

53 copper metel damps of suitable size and as per drawing and Cu.ft 1,320.00 1,350.00

design for BIG Temple and finished / fixed as per directions of E in C.

Work will be as per sample (for carving depth) and pattern (

class and style) as for BIG TEMPLE - AMC HERITAGE SITE

(AHMEDABAD). Work to be carried out as per approved

Drawing which is PROVIDED BY ARCHITECT in full scale.

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for DOOR

STONE work in 1:3 cement sand mortar and jointed in white cement

to match the colour of the stone. Joints of stone to be not more

than 1/8 inches and depth upto stone sizes, all visible angles and

edges to be straigth and free from chipping, work shall be strictly in

plumb line and level including providing dowelling and jointed by

54 copper metel damps of suitable size and as per drawing and Cu.ft 300.00 1,800.00

design for BIG Temple and finished / fixed as per directions of E in C.

Work will be as per sample (for carving depth) and pattern (

class and style) as for BIG TEMPLE - AMC HERITAGE SITE

(AHMEDABAD). Work to be carried out as per approved

Drawing which is PROVIDED BY ARCHITECT in full scale.

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for BEAM

STONE work in 1:3 cement sand mortar and jointed in white cement

to match the colour of the stone. Joints of stone to be not more

than 1/8 inches and depth upto stone sizes, all visible angles and

edges to be straigth and free from chipping, work shall be strictly in

plumb line and level including providing dowelling and jointed by

55 copper metel damps of suitable size and as per drawing and Cu.ft 900.00 1,089.00

design for BIG Temple and finished / fixed as per directions of E in C.

Work will be as per sample (for carving depth) and pattern (

class and style) as for BIG TEMPLE - AMC HERITAGE SITE

(AHMEDABAD). Work to be carried out as per approved

Drawing which is PROVIDED BY ARCHITECT in full scale.

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for CEILING

STONE work in 1:3 cement sand mortar and jointed in white cement

to match the colour of the stone. Joints of stone to be not more

than 1/8 inches and depth upto stone sizes, all visible angles and

edges to be straigth and free from chipping, work shall be strictly in

plumb line and level including providing dowelling and jointed by

56 copper metel damps of suitable size and as per drawing and Cu.ft 420.00 1,089.00

design for BIG Temple and finished / fixed as per directions of E in C.

Work will be as per sample (for carving depth) and pattern (

class and style) as for BIG TEMPLE - AMC HERITAGE SITE

(AHMEDABAD). Work to be carried out as per approved

Drawing which is PROVIDED BY ARCHITECT in full scale.

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for GARBH

GRUH SHIKHAR, PETI, GHUMAT & CHOWKI SAMRAN work in 1:3 cement

sand mortar and jointed in white cement to match the colour of

the stone. Joints of stone to be not more than 1/8 inches and depth

upto stone sizes, all visible angles and edges to be straigth and

free from chipping, work shall be strictly in plumb line and level

including providing dowelling and jointed by copper metel damps of

57 suitable size and as per drawing and design for BIG Temple and Cu.ft 13,020.00 1,089.00

finished / fixed as per directions of E in C. Work will be as per

sample (for carving depth) and pattern ( class and style) as for

BIG TEMPLE - AMC HERITAGE SITE (AHMEDABAD). Work to be carried

out as per approved Drawing which is PROVIDED BY ARCHITECT

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for CHAJJA,

KEWAL, DABRI, KANGRA work in 1:3 cement sand mortar and jointed

in white cement to match the colour of the stone. Joints of stone

to be not more than 1/8 inches and depth upto stone sizes, all

visible angles and edges to be straigth and free from chipping,

work shall be strictly in plumb line and level including providing

dowelling and jointed by copper metel damps of suitable size and

58 as per drawing and design for BIG Temple and finished / fixed as Cu.ft 480.00 1,089.00

per directions of E in C. Work will be as per sample (for carving

depth) and pattern ( class and style) as for BIG TEMPLE - AMC

HERITAGE SITE (AHMEDABAD). Work to be carried out as per

approved Drawing which is PROVIDED BY ARCHITECT in full

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for KAAMAN

work in 1:3 cement sand mortar and jointed in white cement to

match the colour of the stone. Joints of stone to be not more than

1/8 inches and depth upto stone sizes, all visible angles and

edges to be straigth and free from chipping, work shall be strictly in

plumb line and level including providing dowelling and jointed by

59 copper metel damps of suitable size and as per drawing and Cu.ft 360.00 1,800.00

design for BIG Temple and finished / fixed as per directions of E in C.

Work will be as per sample (for carving depth) and pattern (

class and style) as for BIG TEMPLE - AMC HERITAGE SITE

(AHMEDABAD). Work to be carried out as per approved

Drawing which is PROVIDED BY ARCHITECT in full scale.

FLOORING AND WALL CLADDING WORK

Supply and fixing of Marble Flooring in 16mm thickness, of approved

shade and quality, laid over 1:4 cement sand mortar, joints filled with

white cement mixed with matching pigments. Joints not exceeding

60 1/8 inch, surfaces in line, level and plumb, edges straight and free Sq.ft 2,220.00 279.00

from chipping. Flooring to be polished and finished as per Architect

and Consultant’s approval, conforming to approved drawings and

Supply and fixing of Marble Wall Cladding in 16mm thickness, of

approved shade and quality, fixed on 1:3 cement sand mortar or

mechanical anchors as specified, with joints filled in white cement

with matching pigments. All surfaces to be straight, edges true and

61 free from chipping, laid in proper line, level and plumb. Work to Sq.ft 1,800.00 279.00

include dowelling/cramps as required, and finished strictly as per

Architect and Consultant’s approval, based on approved drawings

Supply and fixing of 18 inch x 18 inch(450 mm x 450 mm) COPPER BELL

of approved quality, fixed on mechanical anchors as specified, with

joints filled in white cement with matching pigments. Work to include

62 dowelling/cramps as required, and finished strictly as per Architect NOS 8.00 16,000.00

and Consultant’s approval, based on approved drawings and

Supply and fixing of COPPER DHWAJADAND of approved quality,

featuring a total height of 124 inches (comprising a 109-inch main

shaft and 15 Sal). The shaft shall have a uniform 3-inch diameter and

include a Patli measuring 18" x 9" x 3", along with a Dhwaja (flag) of

size 109 inches in width and 13.5 inches in height. the complete unit

63 shall be fixed on mechanical anchors as specified, with joints filled in NOS 8.00 80,000.00

white cement with matching pigments. Work to include

dowelling/cramps as required, and finished strictly as per Architect

and Consultant’s approval, based on approved drawings and

Providing and fixing 4 ft X 8 ft size of WOODEN MAIN DOOR OF TEMPLE

of approved size fabricated from seasoned BURMA TEAK WOOD of first-

class quality, including traditional carved/panelled design as

approved by the engineer-in-charge. Door shutter to be finished with

polished coating on all sides. The door shall be fixed with matching

seasoned wooden frame of section, including necessary joinery,

64 holdfasts, and hardware such as stainless steel/brass hinges, NOS 8.00 72,000.00

ornamental handle, and traditional lock system. The complete unit

shall be fabricated, carved, polished, and installed as per drawing

and direction of Engineer-in-Charge. Rate to include all materials,

labour, tools, and taxes complete in all respects.

CIVIL AND WATERPROOFING WORK

Brick work inside Samran and Shikhar

Brick work using Modular bricks having crushing strength not less than

35 kg/Sq.m in Super structure above plinth in cement mortar 1:5 (1

cement : 5 fine sand),finised in plumb, line & level, with including

scaffolding at any lvl. etc complete as directed by EIC.

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) for grading of

roof surface to required slope for effective drainage, including mixing

of approved waterproofing compound in required proportion by

weight of cement as per manufacturer’s specification, placing in

66 position, compacting, finishing smooth, curing and all other operations Cu.m 16.00 3,661.30

complete as per drawing and direction of Engineer-in-Charge. Rate

to include cost of materials, labour, tools, equipment, curing,

scaffolding, and all incidental charges complete in all respects.

Providing and applying waterproofing treatment on roof surface with

two or more coats of approved waterproofing chemical compound

(such as Dr. Fixit, Fosroc, or equivalent) over cleaned and prepared

surface, including preparation of surface by cleaning, removing dust,

loose particles and laitance, repairing cracks with polymer-modified

mortar, applying bonding coat, and finishing as per manufacturer's

67 specification and direction of Engineer-in-Charge. The treatment shall Cu.m 66.00 750.00

include application over junctions, around pipe insertions and vertical

surfaces up to 300 mm height. Rate to include all materials, labour,

tools, equipment, and scaffolding complete in all respects.

Construction of GATE

Earth work in excavation in foundation trenches or drains

including dressing of sides and ramming of bottoms, with all lift,

including taking out the excavated soil and depositing and

68 refilling of jhiri with watering & ramming and disposal of surplus Cu.m 208.52 115.92

excavated soil as directed with in lead of 50mtr.

All kind of soil-1.5m

Earth work in excavation in foundation trenches or drains

including dressing of sides and ramming of bottoms, with all lift,

including taking out the excavated soil and depositing and

69 refilling of jhiri with watering & ramming and disposal of surplus Cu.m 3.33 128.52

excavated soil as directed with in lead of 50mtr.

All kind of soil-1.5m to 3m

Conveyance charges of earth lime, murrum, building rubbish,

70 manure, garbage, sludge, excavated rock, fly ash, aggregate of any Cu.m 21.19 256.16

kind etc. comp. upto any lead. up to 1.0 km

70.1 Above 1.0km & up to 5 km Cu.m 42.37 326.73

70.2 Above 5.0 km & up to 10.00 km Cu.m 148.30 363.78

Random rubble stone masonary for foundation and plinth in

71 cement sand mortar above 30 cm thick wall in:Cement Mortar 1:4 ( 1 Cu.m 97.57 2,475.26

cement : 4 Sand )

Supplying and Filling in plinth with blown sand under floors including

72 watering ramming consolidating and dressing complete including Cu.m 45.70 455.63

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) for grading of

roof surface to required slope for effective drainage, including mixing

of approved waterproofing compound in required proportion by

weight of cement as per manufacturer’s specification, placing in

73 position, compacting, finishing smooth, curing and all other operations Cu.m 54.01 3,661.30

complete as per drawing and direction of Engineer-in-Charge. Rate

to include cost of materials, labour, tools, equipment, curing,

scaffolding, and all incidental charges complete in all respects.

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for PILLAR,

BEAM WORK, CHHAJA, KEVAL AND KAAMAN WORK work in 1:3

cement sand mortar and jointed in white cement to match the

colour of the stone. Joints of stone to be not more than 1/8 inches

and depth upto stone sizes, all visible angles and edges to be

straigth and free from chipping, work shall be strictly in plumb line and

level including providing dowelling and jointed by copper metel

74 damps of suitable size and as per drawing and design for SMALL Cu.ft 2,322.00 1,305.00

GATE and finished / fixed as per directions of E in C. Work will be as

per sample (for carving depth) and pattern ( class and style) as

for SMALL GATE - AMC HERITAGE SITE (AHMEDABAD). Work to be

carried out as per approved Drawing which is PROVIDED BY

ARCHITECT in full scale.

ROOP KAAM FOR MOORTI AND MAGAR. Work will be as per sample

(for carving depth) and pattern ( class and style) as for SMALL GATE -

75 AMC HERITAGE SITE (AHMEDABAD). Work to be carried out as per R.INCH 360.00 351.00

approved Drawing which is PROVIDED BY ARCHITECT in full scale.

Cladding work - MURAL WORK/ROOP WORK in Dhranghadhra Stone

of minimum thickness 200 mm, including carving work with a

minimum carving depth of 150 mm, executed strictly as per the

approved design and structural requirements. The work shall include

supply, carving, and installation at site, with stones fixed using cement

mortar in 1:3 proportion, ensuring proper alignment and finish. Where

required, stones shall be additionally secured on the backside using

suitable clamps, hooks, or mechanical fixings to ensure strength,

safety, and long-term durability, complete in all respects to the

satisfaction of the Engineer/Trust.

Construction of Shaptarshi moorti

Supply, Carving and Installation of SEVEN SOLID MOORTI STAND in

Dhranghadhra Stone, having a circular base of 1.00 meter diameter

and a total height of 0.60 meter, suitable for placement of a marble

Moorti. The stand shall be fully solid in construction to ensure

adequate load-bearing capacity and stability, with all carving and

decorative detailing carried out strictly as per approved designs,

maintaining a minimum carving depth of 50 mm - ROOP WORK AND

MURAL WORK. The stone used shall be of uniform colour, fine grain,

77 and free from cracks or defects, and the finished surface shall be Cu.ft 148.00 1,107.00

properly dressed, smooth, and level to allow the Moorti to sit directly

on the stand, complete in all respects including materials, labour,

tools, finishing, and workmanship, in accordance with standard

temple architectural practices and to the satisfaction of the

Engineer/Trust.

Supply of good quality Mirror Polish black marble Moorti of Seven

Sapta Rishi, executed strictly as per the approved design and

detailed drawings provided, with utmost craftsmanship and skilled

workmanship. The Moorti shall have an overall height of 2.20 meters,

with width maintained in proper proportion to the design, ensuring

aesthetic balance and traditional iconographic accuracy. The

marble used shall be of superior quality, uniform in colour, free from

cracks or defects, and the carving shall exhibit fine detailing, smooth

finishing, and high artistic standards, complete in all respects to the

satisfaction of the Engineer/Trust.

Roop work / mural work on the pedestal, executed strictly as per the

approved design and drawings provided, with a minimum carving

depth of 50 mm, ensuring high-quality workmanship, clear definition

79 of forms, and durability of detailing, complete in all respects to the Sq.ft 50.00 1,800.00

satisfaction of the Engineer/Trust.

Construction of DEEP Stambh

Earth work in excavation in foundation trenches or drains

including dressing of sides and ramming of bottoms, with all lift,

including taking out the excavated soil and depositing and

80 refilling of jhiri with watering & ramming and disposal of surplus Cu.m 5.01 115.92

excavated soil as directed with in lead of 50mtr.

All kinds of soil. - upto 1.5m depth

Earth work in excavation in foundation trenches or drains

including dressing of sides and ramming of bottoms, with all lift,

including taking out the excavated soil and depositing and

81 refilling of jhiri with watering & ramming and disposal of surplus Cu.m 0.08 115.92

excavated soil as directed with in lead of 50mtr.

All kinds of soil. - upto 1.5m to 3m depth

Conveyance charges of earth lime, murrum, building rubbish,

82 manure, garbage, sludge, excavated rock, fly ash, aggregate of any Cu.m 0.51 256.16

kind etc. comp. upto any lead. up to 1.0 km

82.1 Above 1.0km & up to 5 km Cu.m 1.02 326.73

82.2 Above 5.0 km & up to 10.00 km Cu.m 3.56 363.78

Providing and laying in position cement concrete including

curing, compaction etc. complete in specified grade

83 excluding the cost of centering and shuttering - All work up to Cu.m 1.01 3,661.30

plinth level. M10 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 40mm nominal size).

Random rubble stone masonary for foundation and plinth in

84 cement sand mortar above 30 cm thick wall Cu.m 4.08 2,475.26

in:Cement Mortar 1:4 ( 1 cement : 4 Sand )

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for PLINTH

work in 1:3 cement sand mortar and jointed in white cement to

match the colour of the stone. Joints of stone to be not more than

1/8 inches and depth upto stone sizes, all visible angles and

edges to be straigth and free from chipping, work shall be strictly in

plumb line and level including providing dowelling and jointed by

copper metel damps of suitable size and as per drawing and

85 design for DEEP STUMBH and finished / fixed as per directions of E in C. Cu.ft 56.25 999.00

Work will be as per sample (for carving depth) and pattern (

class and style) as for DEEP STUMBH - AMC HERITAGE SITE

(AHMEDABAD) having width of 5 ft and height 2.25 ft. Work to be

carried out as per approved Drawing which is PROVIDED BY

ARCHITECT in full scale.

Supply and fixing at site of work carved fine chisel dressed

ornamental DHRANGADHRA sand stone in required sizes for DEEP

STAMBH Work in 1:3 cement sand mortar and jointed in white cement

to match the colour of the stone. Joints of stone to be not more

than 1/8 inches and depth upto stone sizes, all visible angles and

edges to be straigth and free from chipping, work shall be strictly in

plumb line and level including providing dowelling and jointed by

copper metel damps of suitable size and as per drawing and

86 design for DEEP STUMBH and finished / fixed as per directions of E in C. NOS 1.00 4,05,000.00

Work will be as per sample (for carving depth) and pattern (

class and style) as for DEEP STUMBH - AMC HERITAGE SITE

(AHMEDABAD) having width of 3 ft at bottom and 1.25 width at top

and height 15 ft. Work to be carried out as per approved

Drawing which is PROVIDED BY ARCHITECT in full scale.

Landscape works

Supplying and stacking of good earth at site (earth measured in

stacks will be reduced by 20% for payment). Good earth shall consist

of a free draining organic soil from horizons less that 300mm from the

original surface, of a workable crumbly and lump free loamy

character and shall contain no grass or weed growth of any kind or

other foreign material or stones exceeding 25mm in diameter. Total

stone content shall be no greater than 5% by volume. A 1 litre sample

with back up soil test data is required before supply, to be approved

by EIC. Soil should conform to the following parameters: pH 5.5 - 7.8,

87 Electrical conductivity 1:2.5 (w/v), Soil-water extract not exceeding Cu.m 365.00 680.00

1500 micromhos/cm, Soil texture Sand (0.05 - 2.00mm) Max. 75% Min.

20%, Silt (0.002 - 0.05mm) Max. 60% Min. 5%, Clay (less than

0.002mm) Max. 30% Min. 5%. Item includes all royalty, equipment,

labour, loading, unloading, and carriage upto any lead & lift required

for supply and stacking of good earth.

Supply & stacking of Manure: Supplying and stacking of well decayed

cow dung manure (cattle manure measured in stacks will reduced

by 8% for Payment). Manure shall be well composted, dried, well

screened good quality in powdered form. Manure, shall be free from

soil clods, fresh mung grass, and dry. Sample will be approved by EIC.

Item includes all royalty, equipment, labour, loading, unloading, and

carriage upto any lead & lift required for supply and stacking of good

Supply & stacking of cocopeat. Good cocopeat shall be free

from other foreign material, with pH 5.2 to 6.8, uniform texture,

to 2 CU testing without mixture of any fertilizer.

Fibre Content: <2%

Supplying and stacking of clay ball. Good clay ball shall be free from

other foreign material. It should be more porous, without activated

charcoal & 8 to 12 mm in size.

Texture: More porous

Size: 8 to 12 mm

Density: 0.5 to 1 cm3

Measurements: Length, breadth and height of stacks shall be

measured correct in kg. The rate includes the cost of all materials,

equipment, labour, carting, loading & unloading, removal of debris to

local specified within the site, involved in all the operations described

Supply of Coir based Geotextile conforming to IS 15868 : Part 1 to

for covering top of erosion prone slopes or embankments as per IS

15872:2009; fixed to the ground with SS staples of 11 gauge diameter

91 and 220mm length at every 0.50m to 0.75m in longitudinal and Sq.m 1,415.00 1,175.00

transverse direction including supply of all material, labour and

equipment as required, upto any lead and lift; as directed by

Engineer-in-Charge

Staking of trees, palms and large shrubs using quadrapod staking

made of 4 nos Bamboo 25 mm dia 2.5 metre long, fixed 0.3m in the

soil and joined at 2/3 height of plant stem using jute rope, fixed to

92 plant using rubber sheath; plant stem to be covered with gunny / jute NOS 88.00 627.00

cloth at fixing point to prevent damage, complete including supply of

all material, labour and equipment, upto any lead and lift as directed

Anti termite treatment by digging holes 30 cm deep and 4 cm dia,

to 7 holes around the tree using chemical emulsion at the rate of

liter per hole in two time or more application to get the trees free from

93 termite infection chemicals used Chlorpyriphos 20% EC in the ratio of NOS 88.00 98.70

1% concentration and as per direction of EIC.

Providing and planting ( as directed by the consultants / Engineer in

charge) well grown saplings of big trees species (as listed below) and

94 planting the same as directed and maintained till well established.

(About 45 Days)

94.1 Bauhinia purpurea NOS 12.00 282.00

94.2 Cerbera odollam rubra NOS 11.00 225.00

94.3 Plumeria alba NOS 11.00 1,350.00

94.4 Filicium decipiens NOS 12.00 1,500.00

94.5 Neolamarckia cadamba NOS 15.00 2,800.00

94.6 Cassia fistula NOS 11.00 338.00

94.7 Azadirachta indica NOS 6.00 282.00

94.8 Mimusops elengi NOS 10.00 282.00

Supplying and planting Saplings (as directed by the Consultants /

Engineer in Charge) of shrubs

95.1 Alpinia purpurata NOS 162.00 394.00

95.2 Heliconia densiflora fireflash NOS 102.00 394.00

95.3 Angelonia angustifolia dwarf NOS 744.00 113.00

95.4 Canna indica NOS 500.00 169.00

95.5 Liriope muscari NOS 180.00 210.00

95.6 Tecomaria capensis NOS 498.00 290.00

95.7 Plumbago articulata NOS 270.00 250.00

95.8 Pentas (Pink/yellow/red) NOS 558.00 300.00

95.9 Russelia equisetiformis NOS 228.00 350.00

94.10 Pandanus variegated NOS 558.00 34.00

94.11 Barelia cristata NOS 72.00 50.00

Supplying and planting Saplings (as directed by the Consultants /

Engineer in Charge) of Grasses

96.1 Cynodon dactylon SQM 195.00 130.00

96.2 Pennisetum setaceum NOS 960.00 400.00

PLUMBING WORK SUMMARY

PROJECT NAME:Construction of New Temples, Restoration of Existing

Temples, and Development of Temple Plaza under Tourism Circuit from

Saptarshi Ghat to Atal Ghat at Saptarishi Ghat, Riverfront East,

Behrampura, Ahmedabad.

SUMMARY Date : 08-01-2026

No. Item of Works Amount in Rs.

A Plumbing Works

1 SANITARY FIXTURES AND FITTINGS

2 INTERNAL DRAINAGE WORKS (SOIL, WASTE WATER PIPING & FITTINGS)

3 EXTERNAL SEWAGE NETWORK

4 INTERNAL WATER SUPPLY NETWORK

5 IRRIGATION WATER SUPPLY NETWORK

6 EXTERNAL STORM NETWORK

PLUMBING WORKS - SAPTA RISHIGHAT,AHMEDABAD

Item No. Description Unit Rate Amount

SANITARY FIXTURES AND FITTINGS

Providing and fixing wash down wall mounting EWC-P of approved shade, conforming to Pattern 2 of IS: 2556 (Part -II), with SWR Self it Soil PVC pipe and

plug bend as per specifications; glazed vitreous / Coloured European Water Closet with Metropole flush valve, connecting PVC 110mm dia soil pipe with

PVC coupling, nuts, mounting cistern on WC., Ragbolt, Gasket Fitiiing and solid verity heavy duty plastic seat cover as per IS-2548, of approved make; hole

in walls/slab/beam and making good etc. complete as per directed by the Engineer's Representative.

EWC-P with PP Soft close Seat cover, Cistern with cistern fittings:

W.C Wall Hung : Jaquar, Model No. : ARS-WHT-39953BIUFSM

Concealed Cistern : Jaquar, Model No. : JCS-WHT-2400FS

Flush Plate : Jaquar, Model No. : JCP-CHR-292415

Receiving, Checking, Handling, Fixing, Testing and Commissioning of C.P. 2 Way bib cock with angle Valve of best quality (as approved by the Engineer-in-

2 Way Bib Cock :Jaquar, Model no. FLP-5041PM Nos. 3.00 2100.00

Providing and fixing of Hand Shower (Health Faucet), with 8mm Dia,1Rmt Long pvc Tube and Wall Hook accessories to .complete the item etc. complete

as per directed by the Engineer's Representative.

Health Faucet :Jaquar, Model no. ALD-CHR-565 Nos. 3.00 1450.00

Providing and fixing of C.P. copper connecting pipe 450 mm long and nuts, washer and brass flange complete, including cutting and making good the

wall where required etc. complete as per directed by the Engineer's Representative.

Braided Hose Copper Pipe : :Jaquar, Model No. :ALD-CHR-805B Nos. 3.00 460.00

Providing and fixing in position best Indian make toilet recessed type paper holder complete in all respects including cutting and making good the walls

etc. complete as per directed by the Engineer's Representative.

Toilet Paper Holder : Jaquar, Model no. ACN-CHR-1153S Nos. 3.00 1750.00

Providing and fixing White glazed vitreous Oval Wash Basin Under-Counter, size 560x430x195 mm., with supporting M.S. or C.I. Brackets, necessary pipe

connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, Waste

coupling 32 mm size full thread with 80 mm height Chrome plated, Bottle trap Chrome plated , Pressmatic Pillar Cock including necessary fittings with wall

Flange etc. complete in all respects including cutting and making good the walls etc. complete as per directed by the Engineer's Representative.

Wash basin : Jaquar, Model No. : FLS-WHT-5701

Waste coupling : Jaquar, Model No. : ALD-CHR-705

Bottle trap : Jaquar, Model No. : ALD-CHR-769L300X190

Providing and fixing Pressmatic Pillar Cock of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making

good the walls etc. complete as per directed by the Engineer's Representative.

Pressmatic Pillar Cock : Jaquar : KUP-CHR-35011BPM Nos. 4.00 2950.00

PLUMBING WORKS - SAPTA RISHIGHAT,AHMEDABAD

Item No. Description Unit Rate Amount

Providing and fixing 15mm C.P. brass angle valve with wall flange complete, including cutting and making good the wall where required etc. complete

as per directed by the Engineer's Representative.

Angle Valve :Jaquar, Model No. :OPP-15053PM Nos. 4.00 1305.00

Providing and fixing C.P. brass liquid soap container of best quality etc. complete as per directed by the Engineer's Representative.

Liquid Soap Container : Jaquar, Model no. ACN-1137N Nos. 2.00 1750.00

Providing and fixing white vitreous china flat back Urinal of size 385x325x635mm as per IS-2556 (Part-2) with C.I. hangers and pipe to wall with C.P. flange

with Sensotronic Sensor Type Urinal flush valve with installation box with control valve Battery / Electric operated automatic flushes of approved make.

System provided with a solenoid valve and valve connected to a 6 volts lithium battery. Unit automatically serves (the range in about 40 cms) and flushes

in two steps. The pre flush is for 2 seconds duration and the final flushing is for 7 seconds duration. The outlet from the flusher shall be connected to urinal

10.00 with required braided pipes from sensor to urinal flush connection in fixture.

complete including cutting and making good the walls wherever required etc. complete as per directed by the Engineer's Representative.

Urinal :Jaquar : URS-WHT-13255

Urinal Sensor ,Jaquar, SNR-51097

Providing and fixing Urinal partition with frosted glass approx. size 900 MM (H) X 450 MM (W) having 10 MM of glass thickness, including fixing to wall with

suitable brackets all as per manufacturers specification etc. complete as per directed by the Engineer's Representative.

Urinal Partition: Jaquar, Model No. JSE-CHR-110US450X Nos. 2.00 7550.00

Providing and fixing electrical hand dryer, fully automatic type etc. complete as per directed by the Engineer's Representative.

Hand Dryer : Jaquar : HDR-SSF-AK2807 Nos. 2.00 11500.00

INTERNAL DRAINAGE WORKS (SOIL, WASTE WATER PIPING & FITTINGS)

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge.

13.00 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials Rmt. 16.00 146.65

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge.

14.00 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials Rmt. 6.00 193.73

PLUMBING WORKS - SAPTA RISHIGHAT,AHMEDABAD

Item No. Description Unit Rate Amount

Providing and fixing unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support as per detail technical specification, having thermal

stability for water supply including all UPVC plain and brass threated fitting. This includes jointing of pipes and fittings with one step UPVC solvent cement

and testing of joints complete as per direction of engineer in charge. Scope shall also including cutting, chasing the wall/beam by grinder cutter and

making good the same.

Pipe Dia upto 50MM: UPVC (SCH 40)

15.00 Pipe Diameter above 50MM: UPVC (SCH 80)

The rate shall be including all the engineered support (support, hanger, nuts/bolts, anchor fasteners, fixing clamp/channels with U-bolts, etc) as per detail

technical specification etc. complete the job.

Product to compliance with occupational safety standards.

Providing, laying and jointing in true line and level 110 mm diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with eachother

16.00 with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

Providing & fixing PVC SWR TYPE B P Trap of 110 X 110 mm diameter with Height riser/ necessary 110MM Diameter of distance piece for wash basin/ sink

17.00 drain connection with cockroach trap - square flat cut, Satin-matt finish - 150mm x 150mm of approved Make, making necessary slab/ wall/ beam holes

and cutting walls, etc. complete. Nos. 6.00 1700.00

EXTERNAL SEWAGE NETWORK

Providing and supplying 150 mm Inner Dia. Pipe of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric

sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage &

Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores etc. complete.(ID Dia)

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with

18.00 the help of coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of

the corrugation at the spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at

prescribed gradient,depth & alignment ,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as

per drawing, specifications & detailed engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge.

PLUMBING WORKS - SAPTA RISHIGHAT,AHMEDABAD

Item No. Description Unit Rate Amount

Providing and supplying 100 mm Inner Dia. Pipe of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric

sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage &

Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores etc. complete.(ID Dia)

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with

19.00 the help of coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of

the corrugation at the spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at

prescribed gradient,depth & alignment ,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as

per drawing, specifications & detailed engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge. (From GT to First Chamber)

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with

standard weight.

(i) Square mouth traps.

A)100mm x 100mm size P type Nos. 2.00 1280

Manufacture,supply and delivary of chemical fabricated RCC precast chambers with top cover as per specification and drawing attached with the

tender documents of sizes as mentioned below The delivary of chambers with clamps, nuts, bolts, and locking arrangment(without lock )is to be made to

21.00 GWSSB store and sites anywhere in Gujrat.The rates include all taxes, loading, carting, unloading, stacking including all taxes.

Sewage chamber of size 600X600 DEPTH 0.9M

Making connection to Municipal storm water line/ existing drain including breaking them in a systematic way with suitable excavation, dewatering,

dismantling of the RCC or masonry wall or pipe line, passing the plumbing storm water line in the existing structure either through masonry or RCC and

providing suitable "Y" tee to the connect to existing pipe line, Reconstructions of dismantled existing structure according to the original one to bring to the

22.00 working conditions testing etc. work to be done in the presence of municipal eng. including Liasoning cost. complete as per standard as directed by

Engineer-in-charge to complete the job.

PLUMBING WORKS - SAPTA RISHIGHAT,AHMEDABAD

Item No. Description Unit Rate Amount

INTERNAL WATER SUPPLY NETWORK

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

23.00 water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

24.00 water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

25.00 water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

26.00 water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing and fixing male/ female screw ended full way lever operated forged ISI marked brass ball valves with brass body with forged brass hard

chrome plated ball / stem, union.Rated to temperature of 85 Deg C, The valves to be PN 10kgm class on CPVC or GI pipe lines. ( For cold and hot water

27.00 supply lines)

Providing and fixing male/ female screw ended full way lever operated forged ISI marked brass ball valves with brass body with forged brass hard

chrome plated ball / stem, union.Rated to temperature of 85 Deg C, The valves to be PN 10kgm class on CPVC or GI pipe lines. ( For cold and hot water

28.00 supply lines)

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of class PN 10, including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Lowering, laying and jointing in position C. I. D/F Butterfly valves including cost of all labour, jointing material, including nut bolts and giving satisfactory

29.00 hydraulic testing, etc. complete.

Providing and fixing float valve with pressure type PTMT float valve.

Sintex Loft 1000 Litre White Water Tank

31.00 Length 1941mm

Diameter Of Manhole 305mm

IRRIGATION WATER SUPPLY NETWORK

PLUMBING WORKS - SAPTA RISHIGHAT,AHMEDABAD

Item No. Description Unit Rate Amount

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge.

32.00 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. Rmt. 136.00 71.73

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge.

33.00 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. Rmt. 100.00 90.93

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge.

34.00 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. Rmt. 72.00 117.97

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge.

35.00 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. Rmt. 16.00 146.65

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge.

36.00 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. Rmt. 73.00 193.73

Supply, installation, testing and commissioning of 20mm diameter Garden Hydrant with gun metal Ball Valve, Flexible hose Connection Provision and all

required accessories etc. Nos. 38.00 3250.00

Construction of valve chambers in brick or bell stone masonry,locally available in CM 1:6.Foundation concrete 150 mm thick in C.C. 1:4:8 of trap metal

size 25 mm to 40 mm thick,inside cement plaster in C.M. 1:3 and cement pointing outside in C.M. 1:3 and top cover of precast RCC slab 100 mma thick

(with key hole in two parts,each with handles or MS bar etc.complete as given size)UPto 1Mt. depth from G.L. to pipe invert incl.cpmplete civil works but

38.00 excl. cost of excavation and refilling, with cast in situ RCC slab in one sigle piece with fixing of CI-MH frame and cover (excl. cost of CI-MH Frame and

cover) with 23 mm thick brick masonary wall in C.M.:1:6

Size of chamber 0.60M X 0.60M and 1M depth

EXTERNAL STORM NETWORK

Providing and supplying 200 mm Inner Dia. Pipe of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric

sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage &

Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores etc. complete.(ID Dia)

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with

the help of coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of

the corrugation at the spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at

prescribed gradient,depth & alignment ,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as

per drawing, specifications & detailed engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge.

PLUMBING WORKS - SAPTA RISHIGHAT,AHMEDABAD

Item No. Description Unit Rate Amount

Construction of Storm water chamber of size 450x450x600 mm (internal clear) making of RCC including excavation, backfilling, watering, soling,

compaction, Reinforcement etc. complete. It includes M 30 RCC work for walls , top slab and bottom slab as per the drawing, having Rubble soiling and

100mm thick PCC in M-15 at bottom level. It shall be plastered with 20mm thick Plaster with neat coat in CM 1:3 on internal and outside of chamber with

40.00 adquate goliya at all sides. Top shall be covered with FRP recessed Heavy Duty cover with Frame(450MMX450MM Clear Opening). It shall be completed

with all respect in ture line level, plumb with neat & clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction

Construction of Storm water chamber of size 600x600x1000 mm (internal clear) making of RCC including excavation, backfilling, watering, soling,

compaction, Reinforcement etc. complete. It includes M 30 RCC work for walls , top slab and bottom slab as per the drawing, having Rubble soiling and

100mm thick PCC in M-15 at bottom level. It shall be plastered with 20mm thick Plaster with neat coat in CM 1:3 on internal and outside of chamber with

41.00 adquate goliya at all sides. Top shall be covered with FRP recessed Heavy Duty cover with Frame(600MMX600MM Clear Opening). It shall be completed

with all respect in ture line level, plumb with neat & clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction

Construction of Storm water chamber of size 900x900x1500 mm (internal clear) making of RCC including excavation, backfilling, watering, soling,

compaction, Reinforcement etc. complete. It includes M 30 RCC work for walls , top slab and bottom slab as per the drawing, having Rubble soiling and

100mm thick PCC in M-15 at bottom level. It shall be plastered with 20mm thick Plaster with neat coat in CM 1:3 on internal and outside of chamber with

42.00 adquate goliya at all sides. Top shall be covered with FRP recessed Heavy Duty cover with Frame(600MMX600MM Clear Opening). It shall be completed

with all respect in ture line level, plumb with neat & clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction

Making connection to Municipal storm water line/ existing drain including breaking them in a systematic way with suitable excavation, dewatering,

dismantling of the RCC or masonry wall or pipe line, passing the plumbing storm water line in the existing structure either through masonry or RCC and

providing suitable "Y" tee to the connect to existing pipe line, Reconstructions of dismantled existing structure according to the original one to bring to the

43.00 working conditions testing etc. work to be done in the presence of municipal eng. including Liasoning cost. complete as per standard as directed by

Engineer-in-charge to complete the job.

Geophysical Survey Involving Earth Resistivity Principals Vertical electrical sounding using Schlumberger 4 Electrode Array.

Geomagnetic Survey by using TESLA 6 ground water detector or similar equipment working on magnetotellurics 6 channel detection method.

Carrying out borehole logging to make geophysical measurements in better resolution in the required depth dimension to know Lithology, Identification

46.00 of water-bearing zones, Delineation of groundwater quality and Borehole fluid conductivity estimates.

Required Excavation for pits and trenches for Filtration chamber 2.5MX2.5mX3M in soil of required width, length and depth for the rainwater harvesting

system in all types of soil, sand, gravel, clay, soft and hard Murom including removing all excavated material within the premises up to 100 meter lead,

47.00 cleaning of site, removing shrubs, tree roots, vegetation and dewatering if required as per site condition, back filling, ramming, watering for depth up to

3.0 m as per the approved design/ drawing and specifications.

PLUMBING WORKS - SAPTA RISHIGHAT,AHMEDABAD

Item No. Description Unit Rate Amount

Providing and laying 150mm thick plain cement concrete 1:4:8 for base of the system using graded stone aggregate of 40 mm and below size including

necessary formwork at various locations, including mixing, laying, consolidation, finishing, curing & dewatering the pits etc. all as per drawings,

48.00 specifications and as directed.

Providing, fixing, testing and commissioning of readymade and light weight Polyethylene (PE) material rainwater harvesting system with HDPE ladder

specially designed for underground application to absorb surrounding dynamic load having adequate water conveying capacity to function as primary

surface filtration unit / secondary surface filtration unit having filter media up to 300 to 500 mm height in required shape/ size to achieve an effective

sedimentation process connecting storm water drainage having as per manufacturer guidelines and approved design/ drawings with following

specifications.

1000 mm dia x 1800 mm deep x 8 mm thick for Regarge well & Storm water reuse filtration

Providing, fixing and commissioning of readymade 600MM X 600MM Clear opening FRP recess manhole cover with frame adjustable to filtration chamber

for the system specially designed with locking arrangement for various load bearing capacities for vehicular or nonvehicular movement suitable to

application to be fixed to primary/ secondary filtration systems as per manufacturer guidelines and approved design/ drawings.

50.00 5 T load carrying capacity.

Providing, laying and fixing in position unplasticised rigid PVC pipes conforming to IS: 4985 ( working pressure 6 kg/Sqcm) including all fittings such as

bends, clamps to the specified invert levels and slope with provision of water meter fixing arrangement supported by sand filled bags, including all fittings

such as NRV, bends, junctions, Tee, air vent, end-cap, flange adapters, in-situ adapter, access pieces/plugs jointing with uPVC adhesive including cutting

holes and making it good water tight by using specially designed leak proof flange adapters joining, testing & commissioning of overall 10 meter pipe

length for sub-surface filtration system as per design/ drawing as approved.

110 mm dia. For Recharge well

Supply, installation, testing and commissioning of smart water management system to collect real time water quantity parameters for conductive liquids

like rainwater for underground application to be fixed in-line horizontal uPVC pipe having weather proof connection, with data logging device having

IP68 housing with required isolated flow signal with paddle wheel flow sensor, microprocessor based transmission option for flow pattern recording with

GSM / GPRS modern interface feature including 10 meter long cable for 12-24V DC power supply and 12V 3500mAh battery capacity, communicate all

52.00 data to BMS, BMS Compatible including all necessary fixing arrangement as per design/ drawing as approved.

Supplying and fixing two sets of four stage filtration arrangement on inlet and outlet pipes using suitable material to be fixed on uPVC pipe with SS clamp

53.00 as per approved drawing/ design. For Sotrm water Recharge & Reuse Filtration system

PLUMBING WORKS - SAPTA RISHIGHAT,AHMEDABAD

Item No. Description Unit Rate Amount

Drilling and reaming bore hole at site using appropriate drilling methodology such rotary, semi rotary, DTH as suitable to site geology up to designed depth

by bentonite or mud flushing of the borehole including suppling, loading, unloading and filling of sticky clay balls of size 25mm to 50mm and gravel

packing in surrounding gaps while developing of each water bearing zones by using required capacity of air compressor including required machineries,

equipment's, safety measures as per approved design/ drawing and direction of site engineer.

54.00 Rate inclusive of creating pit for drilling process, if required and removal of mud by mud tankers or any other way suitable to site condition, obtain bore-

log report from govt. authorized agencies

450 mm dia bore hole

Providing, laying and fixing in position solid uPVC Casing pipe having minimum 6 kg/ sqcm pressure rating including all leakproof fittings jointing with uPVC

adhesive including joining, testing & commissioning as per aprpoved design/ drawing.

55.00 160 mm dia with solid CM grade casing pipes.

Providing, laying and fixing in position solid uPVC Casing pipe having minimum 6 kg/ sqcm pressure rating including all leakproof fittings jointing with uPVC

adhesive including joining, testing & commissioning as per aprpoved design/ drawing.

56.00 160 mm dia with perforated CM grade casing pipes.

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

ELECTRICAL SUMMARY

SR. DETAIL OF WORK AMOUNT

1 FEEDER SECTION PILLAR (OUTDOOR TYPE) RS.

2 DISTRIBUTION BOARD RS.

3 LT CABLES & CABLE TERMINATION RS.

4 INTERNAL WIRING RS.

5 INTERNAL LIGHT FIXTURE RS.

6 EXTERNAL LIGHT FIXTURE AND POLE RS.

8 DWC, HUME PIPES & MANHOLE RS.

9 JUNCTION BOXES RS.

10 SERVICE WORK RS.

11 DISMANTLING & MAINTENANCE WORK RS.

1 CCTV SYSTEM RS.

2 NETWORKING SYSTEM RS.

3 PA SYSTEM RS.

1 DISTRIBUTION BOARD RS.

2 LT CABLES & CABLE TERMINATION RS.

3 EXTERNAL LIGHT FIXTURE AND POLE RS.

5 DWC & HUME PIPES RS.

6 MAINTENANCE & OPERATION FOR ELECTRICAL RS.

Quantities in above estimate are based on conceptual layouts it may very

1.0 as per final detail design.

Liason work and Estimate of Supply Co's cost is assumed and it may vary as

per supply company requirement.

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

1.0 FEEDER SECTION PILLAR (OUTDOOR TYPE)

1.1 Supply, installation, Testing and commissioning of the outddor type Feeder Section Pillars as per specifications, IS and Drawings 1 1,47,339 Each

The unit rate for each item shall include : Call for final inspection prior to dispatch. Delivery of the fidder pillar / section pillar to site.

Shifting of the fidder / section piller from site to store to the suitable location. Shifting & Fixing of Section Pillar. Assembly and

wiring of component supplied separately. Installation of section piller to including removing old section pillar. Earthing all

components, frame etc. to a common internal earth bar. M.S. parts should painted with powder coating. Supply & fixing all

accessories and supporting structure. Supply & fixing of M.S. 40 x 40 x 6 channels for fixing the panels. Connection, testing and

commissioning Checking of internal connection and wiring, operation of switches, starter, MCCB, relays, contactors etc. Supply of

necessary tools, hardware, testing equipment etc. etc. Electrical contractor shall carry out the insulation test at site and all the

readings shall be submitted in duplicate to the consultant or engineer-in- charge. Approval from State Electricity Board & Liason

TOTAL OF FEEDER SECTION PILLAR

2.0 DISTRIBUTION BOARD

2.10 SPN Distribution Board :

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used) suitable for

(A) Single phase incoming and horizontal single phase outgoing

(b) Sheet Steel double door (IP-43)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used) suitable for

(A) Single phase incoming and horizontal single phase outgoing

(b) Sheet Steel double door (IP-43)

2.2 TPN Distribution Board :

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used) suitable for suitable for (PPI DB)

2.2.1 RO 2885 Each

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) Sheet Steel double door

2.3 VTPN Distribution Board :

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with copper insulated busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

3, suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs should be

2.3.1 RO 8319 Each

used of same company of MCB to be used)

(C)8 way outgoing ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

2.4 MCB 's and its Accessories

Providing & erecting insulated socket 3P+N+E with Plug16A rating which is comprised of Four pole MCB slot and insulated socket

2.4.1 RO 1690 Each

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III.

Providing & erecting 240 V MCB double pole switch for motor & inductive load having 10 KA breaking capacity & confirms to IS :

2.4.3 8828 in existing box having following capacity 1 297 Each

(A) 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in

2.4.4 existing box having following capacity RO 590 Each

(a) 6 to 32 Amp. ( Cat.III)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in

2.4.5 existing box having following capacity RO 662 Each

(b) 40 Amp. ( Cat.III)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in

2.4.6 existing box having following capacity 1 730 Each

(c) 63 Amp. (cat III)

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in

2.4.7 existing box having following capacity RO 582 Each

(a) 6 to 32 Amp. (Cat.III)

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in

2.4.8 existing box having following capacity RO 641 Each

(b)40 Amp. . (Cat.III)

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in

2.4.9 existing box having following capacity RO 709 Each

©63 Amp. . (Cat.III)

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping

2.4.10 with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed 5 1950 Each

(i) 25Amps. DP ( Cat. III)

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping

2.4.11 with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed 1 2213 Each

(ii) 40Amps. DP ( Cat. III)

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having

KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility

trip free mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc.

2.4.12 completed. 1 1925 Each

[b] 32A / 40A, 2 pole Single Phase

2.4.13 SITC of Blank Plates ELECTRICAL & ELV ESTIMATE 5 9 Each 45

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

2.4.14 SITC of Sheet steel metal enclouser for FP MCB 1 630 Each

TOTAL OF DISTRIBUTION BOARD

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

3.0 LT CABLES & CABLE TERMINATION

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(H) 3 core 10 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(G) 3 core 6 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(F) 3 core 4 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(E) 3 core 2.5 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(rate includes termination)

3 core 1.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

3.6 with necessary clamps or in existing trench / pipe of following size of cables 10 215 Mtr.

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of cables

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with

3.8 necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. 10 978 Mtr.

(B) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with

3.9 necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. 10 670 Mtr.

(A) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on

3.10 wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. 42 505 Mtr.

(C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on

3.11 wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. 1225 361 Mtr.

(B) 4 core 4 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of cables.

(A) 4 core 16 Sq. mm

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

3.13 with necessary clamps or in existing trench / pipe of following size of cables. 10 139 Mtr.

(C) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

3.14 with necessary clamps or in existing trench / pipe of following size of cables. 10 125 Mtr.

(C) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

3.15 with necessary clamps or in existing trench / pipe of following size of cables. 10 116 Mtr.

(C) 4 core 4 Sq. mm

Supply, installation, testing and commissioning of heavy duty flange type brass cable gland with rubber ring for PVC insulated

3.16 armoured cable complete with out going tails, insulating tape etc for following size of cables. 60 33 Each

(A) 2 to 4 core 2.5/4 Sq. mm

Supply, installation, testing and commissioning of heavy duty flange type brass cable gland with rubber ring for PVC insulated

3.17 armoured cable complete with out going tails, insulating tape etc for following size of cables. 4 38 Each

(B) 2 to 4 core 6 Sq. mm

Supply, installation, testing and commissioning of heavy duty flange type brass cable gland with rubber ring for PVC insulated

3.18 armoured cable complete with out going tails, insulating tape etc for following size of cables. 4 38 Each

(C) 2 to 4 core 10 Sq. mm

Supply, installation, testing and commissioning of heavy duty flange type brass cable gland with rubber ring for PVC insulated

3.19 armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 47 Each

(D) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated

3.20 armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 66 Each

(A) 3 & 1/2 / 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated

3.21 armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 75 Each

(B) 3 & 1/2 core 35/50 Sq. mm

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

Supply, installation, testing and commissioning of heavy duty flange type brass cable gland with rubber ring for PVC insulated

3.22 armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 51 Each

(E) 2 to 4 core 25 Sq. mm

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

3.23 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 256 8 Each

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

3.24 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 16 10 Each

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

3.25 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 8 12 Each

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

TOTAL OF LT CABLES & CABLE TERMINATION

4.0 INTERNAL WIRING

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade ZHFR/ HRFR PVC insulated multi strand copper wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered with

3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose /

4.1 H.D.Connector as directed. 44 166 Pt.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

ZHFR/ HRFR PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

4.2 necessary Lamp holder/ceiling rose / H.D.Connector as directed. 21 481 Pt.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete(cat lll)

NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade ZHFR/

HRFR PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in

4.3 wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. 5 668 Pt.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete(cat III)

NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR/ HRFR

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete (cat III)

NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR/ HRFR

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete (cat III)

NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade ZHFR/ HRFR

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete (cat III)

NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type

NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade ZHFR/ HRFR PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type

switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete(cat III)

NOTE:1. For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire

4.9 of green colour for earth continuity of following size 50 62 Rmt.

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire

4.10 of green colour for earth continuity of following size 50 82 Rmt.

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for

4.11 earth continuity of following size 10 111 Rmt.

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

SITC of following type of Modular Type accessories mounted with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(7) Blank Plate Single (cat III)

4.13 Providing & erecting Approved make Ceiling Fan with double ball bearing with Condenser 230 volt A.C.50 Hz. 900 mm sweep 5 1963 Ea.

complete having 3 Aluminium blades, canopy erected complete. [ Make shall be approved by Engineer in Charge]

SITC of following type of Modular Type accessories mounted with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(5) Electronic hum Free four or more steps EME Fan regulator (cat III)

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square

4.15 frame. 6 1687 Ea.

200mm with 1350RPM Cat.II

TOTAL OF INTERNAL WIRING

5.0 INTERNAL LIGHT FIXTURE (Minimum Lumen Package must be 100 Lumen/Watt)

Supply, Installation Testing and Commissioning of 24W CEILING SURFACE MOUNTED LIGHT POINT

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

5.1 (iv) 22-24 watts, Surge-2 KV 38 751 Each

Note: All lighting fixture colour to be matched with architecture finishes.

Supply, Installation Testing and Commissioning of 18W CEILING SURFACE MOUNTED LIGHT POINT

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

5.2 (iii) 16-20 watts, Surge-2 KV 15 584 Each

Note: All lighting fixture colour to be matched with architecture finishes.

Supply, Installation Testing and Commissioning of 36W CEILING/WALL MOUNTED TUBE LIGHT POINT

(A) Tube Light with integral driver

5.3 (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet R0 530 Each

Note: All lighting fixture colour to be matched with architecture finishes.

Supply, Installation Testing and Commissioning of 9W WALL MOUNTED MIRROR LIGHT POINT

5.4 (H) Mirror Light 9 Watts, wall mounted minimum 1 feet long 2 309 Each

Note: All lighting fixture colour to be matched with architecture finishes.

TOTAL OF INTERNAL LIGHT FIXTURE

6.0 EXTERNAL LIGHT FIXTURE AND POLE

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament winding machine

using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should be in one piece and

tapered round in shape, having smooth finish and should be totally free from corrosion as well as non conductive & shock proof

Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly weather resistant

polyurethane coating shall be applied to the pole after applying suitable primer system that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of the length of pole

6.1 for the given load“ Pole should be generally made as per the dimensional data, performance criteria and some interchangeability 38 8,637 Each

features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination box with necessary

accessories . The size of pole and type of installation with foundation as per manufacturer details and site requirement are as

[F]Overall length of 4 Mtr. Average Thickness: 7.5mm

OD Dia A/F 89/158 mm ± 2mm approx. approx. Weight of Pole 25 kg approx. (Without Base) Anchor Base (Size 250X250 &

Foundation for 3-4 meter height pole

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with

6.2 necessary curing for pole muffing or any other purpose. 38 5,077 Each

Post Top Fixture:

Supplying, Installing, Testing and Commissioning of 50W Ring Fort Arc Mini Luminaire post top lantern fitting. System Wattage

:50W, LED Driver Integral : Constant Current, Input Voltage : 230 - 240Vac, Frequency : 50-60Hz, Operating Voltage : 100-

277Vac, Operating Temperature : - 15°C~+50°C, Body : Spun Aluminium top cover and die cast aluminium base, Diffuser : Clear

6.3 acrylic (A9) / Clear Polycarbonate (A12), Mounting : Suitable for 50mm dia OD pipe , Finish : Powder coated, Color : Graphite grey 38 9,904 Each

/ Jet black/Anthracite Grey, Light Source : OSRAM / LUMILEDS, LED Lumens : 6825lm, CRI (Ra) : >70, power factor >0.95, and

THD 85%, IP Protection : IP 65,K-Lite LED module with expected service life of at least 72,000 operating hours.LED Colour

Temperature : 3000K / 4000K/ 5700K,

SITC of 11W, High efficient LED with Dark grey, pure polyester powder coated Aluminum casted housing with High efficiency

Transmission with seamless Polycarbonate diffuser.CRI>70, IP65, CCT -3000K / 4000K, Ambient temp-0 to 50 DegC, Driver

efficiency>80%,THD<10%, Powerfactor>0.95, Surge protection-3 kV, Multistage Isolated Constant Current Potted driver and IS

10322 part 5/Sec 3 2012 complyLuminaire lumen ≥ 880 lumens (80lm/W). The luminaire is BIS & CE certifications. (NOTE: Final

light fixture, light fixture Model, light fixture selection & it's

colour, light Colour Coding Temperature, Fixture sample is to be done and approved by the architect and Engineer incharge after

sampling and mock-up before finalization.)

Sculpture Uplighter

SITC of 10-15W, High efficient LED with Aluminium housing with Clear Toughened Glass with Reflector.CRI>70, IP67, CCT -

2700/3000K, Ambient temp-0 to 50 DegC, 50000 burning atL70 criteria Driver efficiency>85%,THD<25%, Powerfactor>0.95,

6.5 Surge protection-2 kV, Multistage Isolated Constant Current driver with 150 - 270 voltage range.Luminaire lumen ≥ 600 lumens 8 1,873 Each

(75 lm/W). The luminaire is BIS & CE certifications. (NOTE: Final light fixture, light fixture Model, light fixture selection & it's colour,

light Colour Coding Temperature, Fixture sample is to be done and approved by the architect and Engineer incharge after

sampling and mock-up before finalization.)

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

High quality LED flexible strip

SITC of High quality LED flexible stripSupply, Installation, Testing & Commissioning of 16mmX16mm of 5 meters length 3000K

Flexible strip led light with Non- Integral driver.The luminaire’s shall be made of Silicon extrusion with highefficiency, high grade

appearance, soft bend flexibility & Option of Top bend , the same shall be so designed with completely made in India luminaire.

The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP67 protection. No need external

decoder.The LEDs shall have minimum CRI ≥80 (White Light)& shall have SDCM≤5. The luminaire shall have system wattage of

14 Watt/meter and shall deliver 714 lumens. Fixture shall operating temperature range of 0°C to 50°C. The fixture shall have an

Non integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours.

Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL

accreditation certificate for Luminaire manufacturer along with technical bid. Bidder shall submit the following reports along with

technical bid LM79 report of the family of luminaire issued by NABL accredited lab, LM80 issued by LED manufacturer BIS

Certificate for LED Luminaire.

Brand name shall be embossed / printed on each an

every light fixtures.

(NOTE: Final light fixture, light fixture Model, light fixture selection & it's colour, light Colour Coding Temperature, Fixture sample is

to be done and approved by the architect and Engineer incharge after sampling and mock-up before finalization.)

SITC of Step Light:

System Wattage : 12W LED,Driver Integral : Constant Current,Operating Voltage : 100-277Vac,Operating Temperature : -

6.7 15°C~+50°C,Body : Die-Cast Aluminium,Diffuser : Clear Acrylic,Gasket : Silicone,Mounting Sleeve : ABS Plastic,Mounting : Wall - 139 1,980 Each

Recess,Finish : Powder coated,Light Source : NICHIA,CRI (Ra) : ≥80,LED Colour Temperature : 3000K,Driver Power Supply :

Integral,Input Voltage : 230-240Vac,Frequency : 50-60 Hz,Power Factor : ≥0.90,THD : <10%,Surge Protection : 2KV /

2.5KV,Efficiency : >85%,IP65

SITC of Plant Uplighter

System Wattage : 12W LED,Driver Integral : Constant Current,Operating Voltage : 100-300Vac,Operating Temperature : -

15°C~+50°C,Body : Die-cast Aluminium Alloy,Diffuser : Clear Toughened Glass,Mounting : Spike / Die-castAluminium

BracketFinish : Powder coated.Light Source : CITIZEN.CRI (Ra) : ≥80.LED Colour Temperature : 3000K.Driver Power Supply :

Integral.Input Voltage : 230-240Vac.Frequency : 50-60 Hz.Power Factor : >0.95.

THD : <10%.Surge Protection : 4KV.Efficiency : >80%.Beam Angle : 25°.IP66

WALL MOUNTED DOWN LIGHT POINT

System Wattage : 6W (6x1) LED ,IP 65, IK:07, Driver Integral : Constant Current, Input Voltage : 230-240Vac , Frequency : 50-60

Operating Voltage : 100-277Vac , Operating Temperature : -15°C~+50°C, DIMENSION ; 145 X 100 x 150mm

Body : Extruded & die-cast aluminium , Reflector : Mirror finish pure AL , Diffuser : Clear toughened glass , Mounting : Surface -

6.9 Ceiling 12 3,907 Each

Finish : Graphite Grey Anthracite Grey Jet Black

Light Source : COB LED , Lumens : 1800 lm , CRI (Ra) : >80 , LED Colour Temperature : 3000K / 4000K

Power Supply : Integral , Power Factor : ≥0.95 , THD : 85% Luminous flux : 1219 / 1186 lm for 25° Beam Angle : 15° / 25° / 40°

(NOTE: Final wattage capacity, light fixture colour, light Colour Coding Temperature,Fixture sample is to be done and approved by

the architect and Engineer incharge after sampling and mock-up before finalization.)

9W LED Floor up lighter/Ground Light Fixture

Supply, Installation, testing and commissioning of 9W, 800 Lumen Floor Up Lighter/ Ground light fixtures equivalent, P66/67 to

6.10 Neri make NCRL 9S/7 complete with suitable rating lamps and all other necessary accessories to complete the installations as per 8 10,896 Each

specifications.

Approved Make - Philips/K-Lite/Lighting Technology/Neri along with all other necessary accessories.

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

Supply, Installation Testing and Commissioning of Flood Light:

6.11 (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. 2 9,552 Each

(vi) above 160 to 200 watts

TOTAL OF EXTERNAL LIGHT FIXTURE AND POLE

7.1 SITC of HOT deep Galvanised iron strip wire 8 to 16 SWG. 110 77 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in

7.3 test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as RO 8,551 Ea.

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

TOTAL OF EARTHING

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

8.0 DWC, HUME PIPES & MANHOLE

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Engineer-in-charge.

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at road

8.2 crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. 50 107 Mtr.

(A) 40 mm inner Dia.

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the

same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the

fault all over the run and back filling the same and making the surface as normal ground.

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding power supply by making up to following

size of holes at both ends complete.

(A) Up to 100 mm bore dia

SITC of R.C.C. Hume pipe for cable to be laid 90 cms. below ground across the road crossing or on floor with necessary material

in an approved manner and making the ground as per original.

SITC of approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary

8.7 connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for

enclosing cable.

8.8 (A)50 mm outer dia 500 62 Mtr.

8.9 (B)63 mm outer dia 1000 73 Mtr.

8.10 (D)120 mm outer dia. 150 136 Mtr.

8.11 Difference of Rate from "Kachcha" Road to "Pakka" Road without pipe (Lumpsum Rate Assumed) 100 32 Mtr.

Construction of ELECTRICAL & ELV chamber of size 1000x1000x1200 (1800x1800x1450)mm including excavation, backfilling,

watering, soling, compaction, Reinforcement, Rungs etc. complete. It includes R.C.C work of M-30 for walls, top and bottom slabs,

also having 100mm thick PCC in M-15 at bottom level. It shall be plastered with 15mm thick Plaster with neat coat in CM 1:3 on

8.12 internal including water proofing and outside of chamber with 20mm thick sand faced cement plaster in two coat at all sides. Top 2 46,769 Each

shall be covered with Pre-Cast SFRC Solid MH cover with clear opening of 900x900mm with frame and cover bearing load min.

25t and size as Mentioned in Drawing. It shall be completed with all respect in ture line level, plumb with neat & clean surface as

per coordinated infrastructure detail drawing up to the level of satisfaction.

Construction of ELECTRICAL & ELV chamber of size 600x600x1000 (1000x1000x1250)mm including excavation, backfilling,

watering, soling, compaction, Reinforcement etc. complete. It includes R.C.C work of M-30 for walls, top and bottom slabs, also

having 100mm thick PCC in M-15 at bottom level. It shall be plastered with 15mm thick Plaster with neat coat in CM 1:3 on internal

including water proofing and outside of chamber with 20mm thick sand faced cement plaster in two coat at all sides. Top shall be

covered with Pre-Cast SFRC Solid MH cover with clear opening of 600x600mm with frame and cover bearing load min. 25t and

size as Mentioned in Drawing. It shall be completed with all respect in ture line level, plumb with neat & clean surface as per

coordinated infrastructure detail drawing up to the level of satisfaction.

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

Construction of ELECTRICAL & ELV chamber of size 450x450x600 (1050x1050x850)mm including excavation, backfilling,

watering, soling, compaction, Reinforcement etc. complete. It includes Bela masonary work in Lime martar of 1:1.5 of Walls, R.C.C

work of M-30 for top and bottom slabs, also having 100mm thick PCC in M-15 at bottom level. It shall be plastered with 15mm thick

Plaster with neat coat in CM 1:3 on internal including water proofing and outside of chamber with 20mm thick sand faced cement

plaster in two coat at all sides. Top shall be covered with Pre-Cast SFRC Solid MH cover with clear opening of 450x450mm with

frame and cover bearing load min. 25t and size as Mentioned in Drawing. It shall be completed with all respect in ture line level,

plumb with neat & clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction.

TOTAL OF DWC, HUME PIPES

9.0 JUNCTION BOXES

Supply, Transportation, Installation, testing and commissioning of IP-67 Rated weather proof Outdoor type junction boxes having

9.1 dimensdios Height x Width x Depth:- 104 x 104 x 70 mm with terminal having black colour RAL 7035. with 5 pole terminal set upto 6 696 Each

Supply, Transportation, Installation, testing and commissioning of IP 66/69 weather proof Outdoor type junction boxeshaving

9.2 dimensdios Height x Width x Depth:- 155 x 210 x 92 mm with terminal having black colour RAL 9011. with 5 pole terminal set upto 4 3,542 Each

TOTAL OF JUCTION BOXES

10.0 SERVICE WORK

Service charges for Liasion with supply company including submission of application forms, obtaining load sanction and other all

associated works to complete the job. It is lumpsum job item and may vary as per requirement.

TOTAL OF SERVICE WORK

11.0 DISMANTLING & MAINTENANCE WORK

Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and

11.1 R0 212 Each

making the site clear by refilling the pits with excavated materials and bringing it to the ground level.

MAINTENANCE & OPERATION FOR ELECTRICAL

Provide annual maintenance service (including supply of material) and operation for 3 years after handing over of work for

11.2 electrical and ELV works as per schedule including necessary materials to be given under warantee free of cost, etc. 1 1,36,812 Year

1st Year ( During DLP Period)

11.2.1 2nd Year ( After DLP Period) 1 1,33,128 Year

11.2.2 3rd Year ( After DLP Period) 1 1,33,128 Year

11.2.3 4th Year ( After DLP Period) 1 1,33,128 Year

11.2.4 5th Year ( After DLP Period) 1 1,33,128 Year

TOTAL OF MAINTENANCE & OPERATION FOR ELECTRICAL

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

1.0 CCTV SYSTEM

Supply, Installation, Testing and Commissioning of IP based 2MP Resolution (1920 X 1080), H.265 H.265 Dome Camera, True

day / night, Up to 50m IR distance with Smart IR,Shutter Speed 1/4s to 1/32000s, Memory Capacity 1GB RAM and 512MB Flash,

Focal Length 2.7mm to 13.5mm, DC-iris, 30fps @ all resolution (up to 60 fps on resolution of 1920x1080), Image Setting with time

stamp, text overlay, flip & mirror, ROI, Saturation, Brightness, Contrast, Wide Dynamic, Sharpen, white balance, video rotation,

AGC etc. EIS, Slow Shutter support, Defog, Video Privacy 8 zones video mask, Multiple Exposure Method, 2D/3D DNROne

Touch Auto-Focus by Motorized V/F Lens, True WDR up to 120dB, 3D DNR, Triple streams, Smart codec by ROI, 2-way Audio

with built-in MIC & Alarm IN/OUT, On-board Encrypted Storage, Advanced Intelligent Video Analytics with AI Object Classification

with AI Object Analytics, Object Classes: Person, Bicycle, Bus, Car, Motorbike, Train, Truck, Any Class, Trigger Rules: Object

1.1 Detected, Perimeter, Linger, Dwell, Abandoned / Removed, Enter, Exit, Crowd, Queue, AI Tamper Detection Blackout, Whiteout, 2 20,170 Each

Scene Change (FoV tamper), Object Sub-Classes: Person Clothing Colour, Vehicle Colour, ,Network Protocol TCP/IP, IPv4, IPv6,

TCP, UDP, HTTP, FTP, DHCP, WS-Discovery, DNS, DDNS, RTP, TLS, RTSP, ICMP, Unicast, Multicast, NTP, SMTP, WS-

Security, SNMP, CIFS, FSTP, UPnP™, SIP, Built-in micro SD card slot, up to 1TB (Encrypted Storage), ONVIF Profile S, G, T &

M, Cyber Security Secure Boot, Enhanced Security Mode (forces complex passwords, HTTPS and disables discovery); TLS

(256 bit cipher minimum); Security Overview Page (status and configuration); RTSP Authentication; IEEE 802.1X Client; Remote

Accessible Audit logs; Role-Based Access Control, Video Encryption for local storage and streaming, CE, FCC, UL & BIS, NDAA

Compliant IP67 / IK10, Operating Temperature -40°C to 60 °C, 0% ~ 95% relative humidity, 5 Years Warranty.

Supply, Installation, Testing and Commissioning IP based 2MP Resolution (1920 X 1080), H.265 H.265 Bullet Camera, True day /

night, Up to 70m IR distance with Smart IR,Shutter Speed 1/4s to 1/32000s, Memory Capacity 1GB RAM and 512MB Flash, Focal

Length 2.7mm to 13.5mm, DC-iris, 30fps @ all resolution (up to 60 fps on resolution of 1920x1080), Image Setting with time

stamp, text overlay, flip & mirror, ROI, Saturation, Brightness, Contrast, Wide Dynamic, Sharpen, white balance, video rotation,

AGC etc. EIS, Slow Shutter support, Defog, Video Privacy 8 zones video mask, Multiple Exposure Method, 2D/3D DNROne

Touch Auto-Focus by Motorized V/F Lens, True WDR up to 120dB, 3D DNR, Triple streams, Smart codec by ROI, 2-way Audio

with built-in MIC & Alarm IN/OUT, On-board Encrypted Storage, Advanced Intelligent Video Analytics with AI Object Classification

with AI Object Analytics, Object Classes: Person, Bicycle, Bus, Car, Motorbike, Train, Truck, Any Class, Trigger Rules: Object

1.2 Detected, Perimeter, Linger, Dwell, Abandoned / Removed, Enter, Exit, Crowd, Queue, AI Tamper Detection Blackout, Whiteout, 15 20,170 Each

Scene Change (FoV tamper), Object Sub-Classes: Person Clothing Colour, Vehicle Colour, ,Network Protocol TCP/IP, IPv4, IPv6,

TCP, UDP, HTTP, FTP, DHCP, WS-Discovery, DNS, DDNS, RTP, TLS, RTSP, ICMP, Unicast, Multicast, NTP, SMTP, WS-

Security, SNMP, CIFS, FSTP, UPnP™, SIP, Built-in micro SD card slot, up to 1TB (Encrypted Storage), ONVIF Profile S, G, T &

M, Cyber Security Secure Boot, Enhanced Security Mode (forces complex passwords, HTTPS and disables discovery); TLS

(256 bit cipher minimum); Security Overview Page (status and configuration); RTSP Authentication; IEEE 802.1X Client; Remote

Accessible Audit logs; Role-Based Access Control, Video Encryption for local storage and streaming, CE, FCC, UL & BIS, NDAA

Compliant IP67 / IK10, Operating Temperature -40°C to 60 °C, 0% ~ 95% relative humidity, 5 Years Warranty.

Supply, Installation, Testing and Commissioning of 32 Channel NVR - 32 Channel Embedded NVR, 8 SATA Upto 144TB, H.265 /

H.264 / MJPEG video compression, RAID 5, 0TB, 512Mbps / 512Mbps (Incoming / Outgoing), HDMI 2.0 X 1 (Main), Single

Stream, Main or Sub Stream, 2 X RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface, SATA interfaces : 8 SATA @ 18TB

each supported, RAID Arrays : RAID 0 / 1 / 5 / 10 supported, Protocol Support : TCP/IP, UDP, DHCP, NTP, RTSP, PPPoE, SMTP,

1.3 FTP, UPnP, DDNS, RTP, IPV4, DNS, RTCP, ICMP, HTTP, QoS, ARP, NVR Operating System : Linux, Network Interfaces : 2 X 1 1,47,125 Each

RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface, USB interface : Total 3 USB ports: 2x USB 2.0 and 1x USB 3.0, ONVIF

: ONVIF Profile S, Alarm I/O : 2IN / 1OUT, Alarm Mode : Manual, Sensor, Motion, Exception, Smart Events, etc., Alarm Action :

Record, Snapshot, Call Preset, E-mail, Buzzer, Certification : CE, FCC, BIS, NDAA Compliant. iOS and Android mobile app

support (25 FPS, 2 MP Resoulution, 30 Days Recording at 2 Mbps Bit Rate)

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

1.4 Supply, Installation, Testing and Commissioning of 10 TB Surveillance Grade HDD 2 22,470 Each

Supply, Installation, Testing and Commissioning of Intel Core i7-12700 12C Processor 25M Cache, up to 4.90 GHz / 16GB DDR5 /

1.5 512 SSD / Win 10 Pro Operating System / No Monitor / DVD RW / 3 Yrs NBD / 1 2,15,605 Each

PS 1000W / NVIDIA GeForce RTXT 3070 8 GB GDDR6 Workstation Graphics Card including 3 DP - HDMI

Supply, Installation, Testing and Commissioning of 55"4K Android Smart TV, 4KResolution 3840*2160, Wi-Fi, Screen Mirroring,

1.6 TV Mirroring, Stereo Sound, USB to USB file Transfer, INPUT: 2* USB, RJ 45*1, 3*HDMI, 1*AV, Coaxial/optical-out*1, Android 9, 1 47,776 Each

1.7 Supply, Installation, testing and commissioning of Back box for CCTV 3 214 Each

1.8 Supply, Installation, testing and commissioning of Wheather Proof Back box for CCTV 15 268 Each

TOTAL OF CCTV SYSTEM

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

2.0 NETWORKING SYSTEM

SITC of O. F.Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath [Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

SITC of LIU 12 PORT Rack Mount - Loaded (LC) SM

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m

2.3 RO 772 Each

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CAT6 UTP 23AWG Solid: Per Meter

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

2.7 Supply, Installation, testing and commissioning of Cat 6 RJ 45 25 21 Each

SITC of 24 x 10/100/1000BASE-T PoE ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

2.8 L2+ Static Routing 2 31,680 Each

Optional “standard mode” or “surveillance mode” management user interface

193 W PoE budget

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Maximum distance of up to 10 km

Single-mode fiber

1000BASE-LX (IEEE 802.3z standard)

Duplex LC connector

MSA, RoHS-compliant [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Supply, Installation, Testing and Commissioning of 8port 240W Industrial Giga L2 managed POE + 2 SFP uplink ports,

temperature range of -40°C to +75°C.

2.11 Supply, Installation, Testing and Commissioning of Fiber SFP modules 1G for 20 km, LC for Single Mode. 8 3,504 Each

Supply, Installation, Testing & Commissioning of 9U (550W X 600D)MM Wall mount closed rack with PDU, Horizontal Cable

manager, self, mounting hardware and cooling fan with standard accessories. UL Certified. Racks should be manufactured by

ISO9001:2015, ISO14001:2004 & OHSAS 18001 : 2007, DIN41494 and Equivalent EIA/ISO/EN /CEA Certified company and

should have proper EHS Policy.

Supply, Installation, Testing & Commissioning of 9U (600W X 600D)MM Wall / Pole mount outdoor rack with PDU, Horizontal

Cable manager, self, mounting hardware and cooling fan with standard accessories. UL Certified. Racks should be manufactured

by ISO9001:2015, ISO14001:2004 & OHSAS 18001 : 2007, DIN41494 and Equivalent EIA/ISO/EN /CEA Certified company and

should have proper EHS Policy.

Supply, Installation, Testing & Commissioning of 17U (600W X 600D)MM floor rack with PDU, Horizontal Cable manager, self,

mounting hardware and cooling fan with standard accessories. UL Certified. Racks should be manufactured by ISO9001:2015,

2.14 RO 18,108 Each

ISO14001:2004 & OHSAS 18001 : 2007, DIN41494 and Equivalent EIA/ISO/EN /CEA Certified company and should have proper

EHS Policy. ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

2.15 Supply, Laying and Fixing of 25 mm diameter MMS PVC conduit with all required acccessories. 100 50 Mtr.

2.16 Supply, Laying and fixing of HDPE pipe 25mm 1000 70 Mtr.

2.17 Supply, Laying and Fixing of 25MM Rainforce Pipe 10 64 Mtr.

2.18 Supply, Laying and Fixing of 32MM Flexible Pipe 100 46 Mtr.

2.19 Supply, Laying and Fixing of 50MM Flexible Pipe 20 88 Mtr.

2.20 Supply, Laying and Fixing of 100 x 50 mm trunking 10 348 Mtr.

TOTAL OF NETWORKING SYSTEM

SITC of Controller

Heart of the Plena Voice Alarm System

EN 54‑16 certified

3.1 Built-in message manager and 240 W amplifier 1 1,74,724 Each

Six‑zone outputs

6 emergency and 6 business triggers

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs: 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

3.2 Tone Controls:Cut & Boost type 1 11,187 Ea.

LED Meter:5 LED Arrays

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic changeover from AC to Battery operation, duly

protected by wrong Battery Polarity connections. [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer

SITC of Call station keypad Seven zone selection keys

LED indications for zone selection

Up to eight keypads can be connected together [Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying , installing & testing approved make Microphone for Speech, Music, & Close to lip singing with inbuilt protection against

breath & wind noise with capability to capture sound from long distance & wide area with frequency response 50 - 16000 Hz,

having sensitivity 1.8mv / Pa & impedance 430 ohms(Lo -Z) supplied with quick detachable holder, 6 Mtr long. Twin core cable &

pin XLR connector.[[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

SITC of Sound projector loudspeaker, 10W

Suitable for speech and music reproduction

Simple power setting

2 m fixed connection cable

IP63 water- and dust-protected

Robust self-extinguishing ABS enclosure to UL 94 V0

Complies with international installation and safety regulations

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Compact ceiling speaker, 6W, metal

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Horn loudspeaker, 30W High efficiency drivers

Wide opening angle

Excellent speech reproduction

Simple power setting

Water- and dust protected to IP

Versatile mounting bracket

Complies with international installation and safety regulations

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be

3.8 erected as directed. 1200 21 Mtr.

(c) 1.00 Sq.mm 2 core round/ flat PVC sheathed mylar cable suitable for speaker wiring

SITC of ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as

3.9 directed 450 32 Mtr.

TOTAL OF PA SYSTEM

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

1.0 DISTRIBUTION BOARD

1.1 SPN Distribution Board :

SITC of IP 65 - outdoor type - 8 Way SPN DB

1.2 MCB 's and its Accessories

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III.

Providing & erecting 240 V MCB double pole switch for motor & inductive load having 10 KA breaking capacity & confirms to IS :

1.2.2 8828 in existing box having following capacity RO 297 Each

(A) 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to IS :8828 in

1.2.3 existing box having following capacity 1 590 Each

(a) 6 to 32 Amp. ( Cat.III)

1.2.4 SITC of Blank Plates 1 9 Each

TOTAL OF DISTRIBUTION BOARD

2.0 LT CABLES & CABLE TERMINATION

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on

2.1 wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. 200 361 Mtr.

(B) 4 core 4 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

2.2 with necessary clamps or in existing trench / pipe of following size of cables. RO 116 Mtr.

(C) 4 core 4 Sq. mm

Supply, installation, testing and commissioning of heavy duty flange type brass cable gland with rubber ring for PVC insulated

2.3 armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 33 Each

(A) 2 to 4 core 2.5/4 Sq. mm

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

2.4 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 8 8 Each

TOTAL OF LT CABLES & CABLE TERMINATION

3.0 EXTERNAL LIGHT FIXTURE AND POLE

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament winding machine

using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should be in one piece and

tapered round in shape, having smooth finish and should be totally free from corrosion as well as non conductive & shock proof

Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly weather resistant

polyurethane coating shall be applied to the pole after applying suitable primer system that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of the length of pole

3.1 for the given load“ Pole should be generally made as per the dimensional data, performance criteria and some interchangeability 10 8,637 Each

features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination box with necessary

accessories . The size of pole and type of installation with foundation as per manufacturer details and site requirement are as

[F]Overall length of 4 Mtr. Average Thickness: 7.5mm

OD Dia A/F 89/158 mm ± 2mm approx. approx. Weight of Pole 25 kg approx. (Without Base) Anchor Base (Size 250X250 &

Foundation for 3-4 meter height pole

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with

3.2 necessary curing for pole muffing or any other purpose. 10 5,077 Each

Post Top Fixture:

Supplying, Installing, Testing and Commissioning of 50W Ring Fort Arc Mini Luminaire post top lantern fitting. System Wattage

:50W, LED Driver Integral : Constant Current, Input Voltage : 230 - 240Vac, Frequency : 50-60Hz, Operating Voltage : 100-

277Vac, Operating Temperature : - 15°C~+50°C, Body : Spun Aluminium top cover and die cast aluminium base, Diffuser : Clear

3.3 acrylic (A9) / Clear Polycarbonate (A12), Mounting : Suitable for 50mm dia OD pipe , Finish : Powder coated, Color : Graphite grey 10 9,904 Each

/ Jet black/Anthracite Grey, Light Source : OSRAM / LUMILEDS, LED Lumens : 6825lm, CRI (Ra) : >70, power factor >0.95, and

THD 85%, IP Protection : IP 65,K-Lite LED module with expected service life of at least 72,000 operating hours.LED Colour

Temperature : 3000K / 4000K/ 5700K,

TOTAL OF EXTERNAL LIGHT FIXTURE AND POLE

4.1 SITC of HOT deep Galvanised iron strip wire 8 to 16 SWG. 20 77 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

TOTAL OF EARTHING

ELECTRICAL & ELV ESTIMATE

Project Name : Shaptrishi Ghat Plaza at Ahmedabad

Sr. No. Description Qty Total Rate Unit Total in Rs

5.0 DWC & HUME PIPES

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the

same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the

fault all over the run and back filling the same and making the surface as normal ground.

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding power supply by making up to following

size of holes at both ends complete.

(A) Up to 100 mm bore dia

SITC of R.C.C. Hume pipe for cable to be laid 90 cms. below ground across the road crossing or on floor with necessary material

in an approved manner and making the ground as per original.

SITC of approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary

5.5 connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for

enclosing cable.

5.6 (A)50 mm outer dia RO 62 Mtr.

5.7 (B)63 mm outer dia 50 73 Mtr.

TOTAL OF DWC, HUME PIPES

6.0 MAINTENANCE & OPERATION FOR ELECTRICAL

Provide annual maintenance service (including supply of material) and operation for 3 years after handing over of work for

6.1 electrical and ELV works as per schedule including necessary materials to be given under warantee free of cost, etc. 1 8,861 Year

1st Year ( During DLP Period)

6.1.1 2nd Year ( After DLP Period) 1 8,861 Year

6.1.2 3rd Year ( After DLP Period) 1 8,861 Year

6.1.3 4th Year ( After DLP Period) 1 8,861 Year

6.1.4 5th Year ( After DLP Period) 1 8,861 Year

TOTAL OF MAINTENANCE & OPERATION FOR ELECTRICAL

ELECTRICAL & ELV ESTIMATE