Annual Plan-614/25-26-Renovation Of South Bund Road Walkway - Division 16-General Civil Work

Canal Road Beautification

OD420868/2025-2026:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

OD518901/2025-2026:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting without roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material

OD420939/2025-2026:Providing and laying Interlocking cement concrete blocks 60/80 mm thick DEPARTMENT PAVER BLOCKS laid in required and pattern over 50 mm thick compacted bed of approved cushion material, compacting and proper embedding flaying of interlocking paver blocks into compacted layer through vibratory compaction by using plate vibrator, and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in light traffic parking etc. complete as per the direction of Engineer in charge

OD421097/2025-2026:Providing and laying of interlocking concrete block pavements using 80 mm M40 hydraulic blocks of approved size ,design, shape laid in required pattern over and including a compacted bed of 6 mm stone aggregate of 50 mm average thickness etc. complete as per the direction of engineer in charge

3.5.1:Excavation in Cutting in Soil by manual means with lead upto 50 m <br> Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

11.4.1.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 <br> I. P.C.C grade M 10 <br> (i) Nominal mix 1:3:6

75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

10.6:Painting on Steel Surfaces <br> Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

OD420963/2025-2026:Engaging man coolies