REPAIRS TO JOINERY, FLOORING, ROOF TREATMENT, SANITARY FITTINGS AND OTHER B/R WORKS AT AREA A, C AND B AT AF STN WADSAR

Amount

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) n. exc. 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) exc. 1.5 Sqm but n. exc. 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc. 1.0 Sqm and n. exc. 2.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc. 2.0 Sqm each complete all as specified and as directed.

Taking down and refixing shutters of any description exc 1 Sqm and not exceeding 2.0 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and as directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and as directed.

S&F framed work as in door frames or gates chowkats of angle or other section with braces, etc., complete, drilled or welded for MS hinges for fixing of gate or doors other covering and also fastening and fixing complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel designed with 2 mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part - II 2020 and as directed by GE/ Engineer-in-Charge.

All as per item no. 9 here in before but (SSR 2020 SI-08080) but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly.

M&L for 35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (with shash bar) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8, clause 8.24(a) supplyed and fitted to chowkats and directed by Engr-in-Charge.

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated and all as specified and as directed by Engineer-in-Charge.

S&F aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92mm x 31.75mm x 1.50mm, bottom size 92mm x 31.75mm x 1.50mm and shutter top & bottom of size 40mm x 18mm x 1.50mm and sides (handle) of size 40mm x 18mm x 1.50mm and lock side shutter frame of size 40mm x 18mm x 1.50mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4.0 mm thick glass with necessary rubber beading gasket etc complete all as specified and as directed by Engr-in-Charge.

S&F aluminium ventilator powder coated (requried colour to match window colour), louvers type, frame top & bottom of size 31mm x 42mm x 1.50mm (rectangular tub of size 40mm x 20 x 2mm (and middle vertical of size 42mm x 46.20mm x 1.50mm Section and clip for fixing wire mesh and glass of size 19mm x 17.30mm x 0.90mm thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 4.0 mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium powder coated (requried colour to match window colour) grill of 5.0mm dia squares rectangular triangular circular shape aperture n. exc. 7.00 cm in length or width fixed with H or F channel of décor or equivalent complete all as specified and as directed.

S&F aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50mm thick, middle rail of section 85mm x 44.5mm x 1.50mm thick and top rail of section 80.4mm x 44.5mm x 1.50mm thick and styles of section 80.4mm x 44.5mm x 1.50mm thick with 4.0mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 1.50mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and as directed.

S&F for 12 mm thick toughned glass as in doors, partitions including hinges, door closer/automatic door closer/floor spring and similar work including cutting to shape, moulding of edge etching design if reqd including locking device and SS handles drilling holes required and necessary fitting for fixing the same complete all as specified and as directed.

S&F aluminium partition made with aluminium anodised section 62.30mm x 44.45mm x 1.50mm fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5.0mm thick glass (black/ tinted/ plain) and all necessary fittings complete as in partition all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid and bedded on pointed on any mortar complete all as specified and as directed.

M&L 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform sand like in cement mortar (1:4) including moulding and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for single piece of green marble slab 15-18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Marble slab including moulding, cutting and polishing and nosing and polishing of the free or front edge of the slab window cills etc and including 15mm thick backing coat in CM (1:4) complete all as specified and directed in Engineer-in-Charge.

S&F 100 mm long SS butt hinges and fixed to frame with scrwewd or welding/ gas welding complete all as specified and as directed.

S&F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 250mm complete all as specified and as directed by Engineer-in-Charge.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-Charge.

S&F 150mm long floor door stopper of aluminium body and tongue, with hard drawn steel spring, fixed to bottom of door shutter complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surface of any description over 10cm width or grith not otherwise described and applying two coats of synthetic enamel paint over a coat of zink chromate primer complete all as specified and as directed.

S&F in repairs sheet glass (plain/ frosted) 4.0mm thick ordinary quality fixed with wooden beadings/ oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs sheet glass (plain/ frosted) 4.0mm thick ordinary quality fixed with wooden beadings/ oil putty in squares exc. 0.5 Sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or teak wood beading for wooden doors etc. complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or teak wood beading for wooden doors etc. complete all as specified and as directed.

All as per Item No. 33 above but fixed in repair to aluminium door/ sliding windows, aluminium ventilators, wooden wire mesh doors, PVC wire mesh doors including beading, packing etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs auminium die cast body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed suatable for shutter complete all as specified and as directed.

S&F in repairs 300mm mild steel ordinary rat tail/ helical spring including roller, roller plate complete with provision of fixing in wooden, welded to pressed steel or angle iron frame complete all as specified and as directed.

S&F in repairs prelaminated particle board 25mm thick exterior grade pre laminated both sides with decorative choice lamination and fixed with screws to cupboard shutter and fixed to shelves complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs for PVC kitchen cabinets made with door frame of size 48mm x 40mm, shutter frame 45mm x 300mm and 20mm thick shutter and including 75mm size stainless steel butt hinges complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 25mm dia stainless steel drapery rod with and including two Nos. of bracket/ holders suitable for drapery 25mm dia rods of one window/ door openings etc complete all as specified and as directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permices complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in levelling course complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer of morter for laying floor finishes CM (1:6) complete all as specified and as directed.

M&L for vitrified ceramic tiles 10mm thick dark shade (square/ rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floor/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured digital tiles 450mm x 300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of CM (1:4) complete all as specified and as directed.

Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars, etc complete all as specified and as directed.

M&L for brick work sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

Taking dawn cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint, haking for key scrubing with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of concrete or block masonary CM (1:6) finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and as directed.

M&L for rendering 5mm thick in ceiling surfaces CM (1:4) complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer over a sufficent coat of wall care putty complete all as specified and as directed.

M&L for preparation of new surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15cm thickness (below or above GL) complete all as specified and as directed.

M&L for 75mm thick Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) as in plinth protection and Finishing cement concrete surface even and fair with brooming and every 2mtr constrction joint to be provided and filled with bitumen with saw dust complete all as secified and directed.

M&L for providing 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver block of any shape and size with grey cement and pigment conforming to IS : 15658-2006 of 60 mm thickness, M-35 Grade over sand cushion complete all as specified and as directed. Note:- Sand will be measured and paid separately.

M&L for 25mm thick sand filling (sand cushioning) under path for laying interlocking tiles complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store complete all as specified and as directed.

All as per Item No. 60 above but 20mm dia.

S&F 15mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

All as per Item No. 62 above but 20mm dia.

Re-fixing old 15mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as required complete all as specified and as directed.

Re-fixing old 20mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc. as required complete all as specified and as directed.

S&F in repair fancy type CP bib taps 15mm dia, chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair fancy type CP stop/ angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 75mm dia outlet CI nahani trap plain with SS grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 15 mm dia pillar tapes, fancy type, chromoum plated brass with half turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and as directed.

S&F in repairs waste coupling of 32mm dia brass CP for glazed ware sink basins, etc. with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair 125mm dia fancy type CP shower rose complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC waste pipe of 32mm dia complete all as specified and directed.

S&F in repair SS shop dish of size 100mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC water connection 600mm long to wash basin of 15mm dia including CP nuts and washers complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet pan pedestal pattern, white excluding fixing cistern and flush pipe trap front or back inlet including seat cover of any pattern and health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed.

S&F in repairs Vitreous china wash basin flat back size 630X450 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S & F in repair vitreous china squatting pan 'Orissa pattern of size 580 x 440 mm white with integral foot rest( excluding flushing cistern and flush pipe) squatting pan including connecting to 'P' trap and to flushing pipe complete.

S&F in repair PVC valveless, syphonic action type flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including bracket, complete all as specified and directed.

S&F in repair health faucet (ABS) with rubit cleaning system 1.25m long PVC flexible tube & ABS wall hook complete all as specified and as directed.

S & F in repair SS jet with inlet pipe suaitable for EWC complete all as specified and as directed.

S&F in repair stainless steel grating with or without hole of size 150mm complete all as specified and as directed.

S&F in repair plastic water closet seat cover to pedestal pattern pan with chromium plated hinges complete all as specified and as directed.

M&L for removal of plant growth by injection with chemical glyphospate solution (4% conceneration) of 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then sprayed with solution 25ml glyphosphate (4% concent) diluted with 1 ltr of water. All roots/ plants shall be removed completely and making good the distrubed compound and painted with cement base or acrylic paint complete all as specified and as directed by Engr-in-Charge.

S&F in repair for provision of false ceiling at height of 600mm x 600mm x 15mm mineral fibre ceiling tiles RH-99 of type micro looks edge laid on super fine XL 15mm expose d grid systems with 15mm wide T- section flanges. The frame work comprises of main runner of size 15mm x 32mm x 3000mm spaced at 1200mm centre securing fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers (GI wire of 3.0mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall flush fitting 1200mm long cross tees of size 15mm x 26mm x 1200mm to be interloched between main runners at 600mm centers to form a 1200mm x 600mm module. Cut cross tees longer than that 600mm to be supported independently. 600mm x 600mm modules to be formed by fitting 600mm long flush fitting cross tees of size 15mm x 26mm x 600mm centrally between the 1200mm crosstees perimeter wall angle of size 19mm x 19mm x 3000mm secured to wall at 450mm maximum centres. Finally RH-99 mineral fibre tile 15mm thick micro look edge has to be laid on the 600mm x 600mm module complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC wall panelling plastic section for wall panelling having code set of 144 of size 250mm x 6mm fixed to wall including matching colour and material beading of suitable size complete all as specified and as directed.

S&F in repair false ceiling size of 600mm x 600mm x 15mm mineral fibre ceiling tiles RH-99 of type micro looks edge complete as as specified and as directed.

Removing of existing unserviceable water proofing treatment including PCC tiles (except PCC padding) taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises out side MD land complete as as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B0 (using 12.50mm graded stone aggregates) laid to slope in padding for WPT over roof slab complete all as specified and as directed by Engineer-in-Charge.

M&L for applying cold bituminous primer @ 0.30 Ltr/ Sqm conforming to IS 3384 laying APP polymer modified membrane 3.6 to 4.0 Kg/ Sqm in weight with non-woven polyster reinforcement (mineral gravel finish on upper side of the membrane) and sealing all overlaps of 100mm in length side and 150mm on width side of membrane by torching the same as per manufacture instruction and all as per specified particular specification and including 10mm thick rendering in CM (1:3) mixed with WPT 3% by weight of cement complete all as specified and as directed.

Supply only intergral water proofing compound complete all as specified and as directed.

M&L for removing the tank over roof and re-fixing in the same position including cleaning complete all as specified and as directed.

M&L for cleaning and removal of all scale, dirt, mud and any foreign material and removing accumulated silt etc from PVC tank and from mouth for circulating pipes of any dia etc. repairs to minor cracks stopping leaking of inlet/ outlet pipe by tightening of joints and alike and making joints leak proof of capacity of tank exceeding 250 Litres and not exceeding 1000 Litres complete all as specified and as directed by Engineer-in-Charge.

Dismantling water tanks and exc. 250 but n. exc. 500 litre capacity complete all as specified and as directed.

S&F rotational moulded water storage tank 500 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repair 15mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Dismantling water tanks and exc. 500 but n. exc. 1000 litre capacity complete all as specified and as directed.

S&F rotational moulded water storage tank 750 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repair overhead tank PVC cover thread/ hinged type with suitable locking arrangement suitable upto 1000 Ltrs capacity complete all as specified and as directed.

S&F in repair 15mm dia (min weight 142 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 20mm dia (min weight 210 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.

S&F in repair stainless steel plate rack of size 750mm x 600mm x 250mm of approved make including taking down old wooden plate rack complete all as specified and as directed.

S&F in repair CP peg set of four as per sample kept in GE’s office complete all as specified and as directed.

S & F in repair CP center hole wash basin mixer cast copper alloy suitable for iron pipe 15mm bore complete all as specified and as directed. Make L & K code 0427-A or equivalent as approved by GE.

S&F in repair, two way angle valve cock chromium plated fancy type bore 15mm complete all as specified and as directed. Make : L&K code No 0327 or equivalent as approved by GE.

S&F in repair sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45cm long complete all as specified and as directed.

S&F in repair toilet paper holder chromium plated as per sample kept in GE’s office complete all as specified and as directed.

S&F in repair chromium plated towel rail 600mm long complete all as specified and as directed.

Dismantling of Plain or corrugated Asbestos cement / polycarbonate, translucent (corrugated, semicorrugated, plain etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

S&F for MS framed works as in purline, rafters, column square/ rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc including bending of MS section as requried such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F in repair pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 18mm thick marine plywood fixed with nails/ screws to frame works as in cabinets cupboards with SS angles cleats etc complete all as specified and as directed.

All as per item No 114 here in before but 6mm thick complete all as specified and as directed.

S&F in repair for white laminates of 0.8mm thick glossy finish colour and pattern as approved adhesive complete all as specified and directed.

S&F in repair for decorative laminates of 1mm thick glossy finish, colour and pattern as approved adhesive complete all as specified and directed

S&F in repair for sliding of 5mm thick with hitching four corners with flowers and lines pattern as approved including SS two track sliding chennel with rollers and accessories and fixed to kitchen cabinets complete all as specified and as directed.

S&F in repair auto hydrolic spring stainless steel of 300-450mm long for kitchen cabinets as per sample complete all as specified and as directed.

S&F in repair stainless steel accessories grade 202 as mentioned below complete all as specified and as directed.

(a) Plain basket of size 19''x20''x4''

(b) Plain basket of size 19''x20''x6''

(c) Plain basket of size 19''x20''x8''

(d) Cutlery basket of size 19''x20''x4''

(e) Cup and saucer basket of size 19''x20''x6''

(f) Thali/plates basket of size 19''x20''x8''

(g) Glass Baskets of size 19''x20''x4''

(h) Bottle Baskets size 19''x20''x6''

(h) Partition Baskets size 19''x20''x8''

S & F in repair 100mm long Mortice latch with two lever (vertical type) brass body complete all as specified and directed.

S&F in repair CP decorative type SS handles 75mm long fixed to PVC sheet or frame complete all as specified and directed by Engineer-in- Charge.

S&F in repair magnetic and connected plate to shutter and frame as per sample complete all as specified and directed.

S&F in repair door seal strips strong rubber weather stripping door at bottom (standard length) complete all as specified and directed.

S&F in repair for glass corner shelf 12 x 12 inch wall mount with 5mm thickness with SS railling complete incl bolt/bracket for securing to wall complete all as specified and directed by Engineer-in-Charge.

S&F in repair roller window blinds, roller shade look and classy, covering the window edge to edge for windows, roll up blinds come with the rolling machanism, colours, design, and patterns approved by the Engr-in-Charge

S&F in repair wall paper covering of any pattern design, motive or colour as approved complete all as specified and directed.

Taking dawn CI pipe 100mm /75 mm of any description complete all as specified and directed by Engineer-in-Charge.

S&F for CI waste and vent pipes in any length with or without ears, fixed to wall dia of pipe 100mm complete all as specified and directed by Engineer-in-Charge.

All as per item No 129 here in before but 75mm dia in floor.

S&F in repair 100mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let etc. complete all as specified and directed.

S&F in repair 75mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let etc. complete all as specified and directed.

S&F in repair cast iron bends of any type radius diminishing pieces or tapes (large bore measured) of 75mm dia bore with oval access doors etc. complete all as specified and directed.

S&F in repair cast iron bend 100mm bore (any radius) dimnishing pieces or tapers with oval access doors etc. complete all as specified and directed.

S&F in repair cast iron branch piece, single (equal and unequal) ordinary or inverted (spigot or socket type) or with parallel branch of 75mm dia complete all as specified and directed.

S&F in repair cast iron branch 100mm bore Branch piece, single (equal or unequal ) ordinary or inverted (spigot or socket type) with parallel branches with oval access door complete all as specified and directed.

S&F in repair CI cowls of 100mm complete all as specified and directed.

S&F in repair CI cowls of 75mm complete all as specified and directed.

Taking down PVC pipe (SWR) 110mm dia bore and connection complete all as specified and directed.

Taking down PVC pipe (SWR) 75 mm dia bore and connection complete all as specified and directed.

S&F 75 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall complete all as specified and directed.

S&F 110 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall complete all as specified and directed.

S&F in repair 75mm dia of outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 110mm PVC( SWR) WC connector with lip ring complete all as specified and directed.

S&F in repair for locking arrangement at overhead tank cover with MS flat 50x6mm length 1.0 to 1.10m with 2 Nos 10mm dia 75mm long bolt with nut and washer complete all as specified and directed.

S&F in repair for multiseal, self adhesive tear-resistant sealing tap 100mm wide 3 mtr length per roll complete all as specified and directed.

Paliwal Construction Company

Priya Construction co.

DMA PROJECTS

JIYA CONSTRUCTION

RAMJI LAL & SONS