West Bengal

Active

Works

Electrical Work/ Equipment

NIQ-35 (EL) of 2026-2027 (SL NO 05)

NORTH BENGAL DEVELOPMENT DEPARTMENT

Cooch Behar | Jalpaiguri, West Bengal

Amount: Refer DocsCloses: 14 Oct 20264d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published1 Oct 2026
Closes14 Oct 2026
Bid Opening27 Oct 2026

Tender Value

Refer Docs

EMD Value

₹30,000

Closing Date

14 Oct 2026, 3:05 pm4d left

Tender Inviting Organisation

Name

Sudipta Bose (EE/EL)

Address

nbdd uttarkanya

Work Description

Electrification work for Vertical extension of classroom with Toilet block and Existing old classroom at Dinhata Sonidebi Jain High School(H.S) under Dinhata Municipality of Dinhata -I Block in the district of coochbehar.

Tender Information

Tender ID

2026_NBDD_1044094_5

Reference Number

NBDD/BS/EE /NIQ-35 Sl. No. (01-07)- (EL) of 2026-2027

Tender Type

Open Tender

Product Category

Electrical Work/ Equipment

Form of Contract

Item Rate

Location

Cooch Behar

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical

RequiredNOTICE (.pdf)

RequiredONLINE EMD PAYMENT (.pdf)

RequiredOTHERS (.pdf)

Required2911-II (.pdf)

RequiredCORRIGENDUM IF ANY (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

EMD Fee Amount

₹30,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

1 Oct 2026

Published

1 Oct 2026

Bid Opening

27 Oct 2026

Download Starts

1 Oct 2026

Download Ends

14 Oct 2026

Submission Starts

1 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (42 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door.(Make: Legrand/Schneider/Siemens/Havells Crabtree as per the choice of EIC)	1	Set	-	-
2	Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 150A(Make :Legrand/Schneider/Siemens/Havells Crabtree)	1	Each	-	-
3	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole (Make: Legrand/Schneider/Siemens/Havells Crabtree as per the choice of EIC)	2	Each	-	-
4	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door.(Make: Legrand/Schneider/Siemens/Havells Crabtree as per the choice of EIC)	1	Set	-	-
5	Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 100A(Make :Legrand/Schneider/Siemens/Havells Crabtree)	1	Each	-	-
6	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole(Make: Legrand/Schneider/Siemens/Havells Crabtree as per the choice of EIC)	1	Each	-	-
7	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable ( Make :Havells/Polycab/Finolex/RR Cabel as per the choice of EIC) in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C	283	Point	-	-
8	Supplying and fixing following modular switch/ socket( Make :Legrand Nextgen /Schneider/Siemens/Havells Crabtree as per the choice of EIC) on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch	40	Each	-	-
9	3 pin 5/6 A socket outlet	40	Each	-	-
10	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket( Make: Legrand Nextgen /Schneider/Siemens/Havells Crabtree as per the choice of EIC) outlet and 5/6 A modular switch, connections etc. as required.	32	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.67 MB

Tendernotice_2.pdf

PDF • 0.52 MB

Work Item Documents

BOQ_2561235.xls

BOQ • 0.37 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door.(Make: Legrand/Schneider/Siemens/Havells Crabtree as per the choice of EIC)

Set

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 150A(Make :Legrand/Schneider/Siemens/Havells Crabtree)

Each

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole (Make: Legrand/Schneider/Siemens/Havells Crabtree as per the choice of EIC)

Each

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door.(Make: Legrand/Schneider/Siemens/Havells Crabtree as per the choice of EIC)

Set

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 100A(Make :Legrand/Schneider/Siemens/Havells Crabtree)

Each

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole(Make: Legrand/Schneider/Siemens/Havells Crabtree as per the choice of EIC)

Each

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable ( Make :Havells/Polycab/Finolex/RR Cabel as per the choice of EIC) in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C

283

Point

Supplying and fixing following modular switch/ socket( Make :Legrand Nextgen /Schneider/Siemens/Havells Crabtree as per the choice of EIC) on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

Each

3 pin 5/6 A socket outlet

Each

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket( Make: Legrand Nextgen /Schneider/Siemens/Havells Crabtree as per the choice of EIC) outlet and 5/6 A modular switch, connections etc. as required.

Each