SPL REP TO SHED NO58 WITHIN PRIMISES OF 29FAD STN AMN STORE FAC AND HARDSTANDING OF UNIT MT AREA 29FAD PRVN OF WASHBASIN KITCHEN SINK ALONG CON FITTING AT ASHOK NAGAR BARBED WIRE FENC ON A1 DEF LAND UNDER WATCHWARD 787 AD BDE SIGCOY AT GE DEHU ROAD

Amount

S&F sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs,washers and waste pipe,coupling; including bedding in cement mortar to dwarfwall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F bib taps cast copper alloy long body with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and directed.

S & F in pillar taps long body ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and directed.

S & F in Brass cromium plated with capstan heads shower rose of 125 mm dia complete all as specified and directed.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.) complete all as specified and directed.

S&F Tubes, 'medium grade'galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors (15 mm bore dia) complete all as specified and directed.

S&F Low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to walls,ceilings or in floors etc. (40 mm bore dia) complete all as specified and directed.

S/F Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm

S&F stop valves cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe complete all as specified and directed.

M/L for CI nahani trap 75mm dia with gratings incl jointing to waste pipe, fixed in cement concrete 1:2:4, type B2 including taking down old broken traps complete all as specified and as directed.

M&L, brick work with sub class ‘B’ bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster and removing rubbish off the premises etc complete all as directed.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheet as in roof covering

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness including cover fillets of any description complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed.

S&F 0.63 mm galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

Ditto as per item- 21 above but plain sheet as in ridge & valley gutters etc

S&F Rolled Sections as in main and cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified and directed.

S&F Roof truss framed trussed etc incl distance piece , cleats with necessery welding works etc Fe 410-W ( gde E-250)Quality A complete all as specified and directed.

M&L for preparation of previously untreated steel surfaces of any description over 10 cm width or girth including roof members and roof sheet & applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 Type C2 for plinth protection complete all as specified.

M & L for 100 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base of concrete all as directed.

M & L for 75 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregate) as in floor and finishing of concrete surface even and smooth without using extra cement all as directed.

S & F Anodised Alu. snap grid (605x605)mm frame wk for false ceiling , providing M&L 9mm thick Acoustical board/tiles for insulation and accoustic purposes, (60x60) cm in size, fixed in celing with screws to frame work or with staples on snap grid, hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat (40 X 3) mm size 60 mm long complete all as specied and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below/above ground level) and disposal of material up to distance 250mtr,complete all as specified.

M & L for100 mm thk Hard core of broken stone or boulders, gauge n.exc. 63 mm deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over and including providing and spreading 30mm thick sand layer all as specified.

Finishing surface of concrete roads, pavements etc by belting/brooming complete all as specified and directed.

M & L for forming 12 mm thick expansion joints 150 mm deep, filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.

M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distanc n exc 50 m and making good surface in hard/dense soil complete all as specified and directed.

M&L for Cement concrete type C2 1:3:6 (using 40mm graded aggregates) as in foundation, filling and mass concrete.

S&L Mild steel work post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

H S TAKHI

Ridhi Constructions

DR J S CHADHA AND SONS

Dinesh Constructions

RAMESH PATIL

S RESHAMSINGH AND SONS

Shri Sant Cosntruction