Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 2₹81.8 L+₹1.5 L (1.90%)Accepted-AOC | 2 | Accepted-AOC LOWEST BID AFTER REJECTING THE BIDDER WITHOUT LICENCE FROM PWD OR IRIGATION | |
| 2 | 1₹80.3 LRejected-Finance PANCHAMIYIL PUTHUPPALLY KAYAMKULAM ALAPPUZHA | KAYAMKULAM | ALAPPUZHA | KERALA | 1 | Rejected-Finance NO CONTRACT LICENCE FROM PWD OR IRRIGATION DEPARTMENT |
Tender Value
₹82.7 L
EMD Value
₹50,000
Closing Date
22 Sept 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rajeev R
Assistant engineer , Lsgd section , Pathanapuram GP
Construction of 190KLD seiwage treatement plant at pathanapuram shopping mall
2022_LSGD_507834_1
3/Ae/Etender/Ptpm/22-23
Open Tender
Civil Works - Others
Item Rate
180 days
Pathanapuram
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,500
Yes
₹50,000
Yes
31 Dec 2022
15 Sept 2022
26 Sept 2022
15 Sept 2022
22 Sept 2022
15 Sept 2022
30 days
Amount
CIVIL UNDERGROUND TANKS EXCLUDING SOLID HOLDING TANK
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
2.26.1 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
5.9.2 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
50.13.1 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
19.18.3 Supplying and fixing C.I with out frame for manholes: 560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
9.48.2 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc
SUMP HOLDING TANK
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
2.26.1 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
5.9.2 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
50.13.1 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
19.18.3 Supplying and fixing C.I with out frame for manholes: 560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
PUMP ROOM
12.1.1 Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m2
10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
4.7.1 Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 4.7.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
13.4.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
ELECTRICAL AND INSTRUMENTATION
METERING BOARD WITH ISOLATION Supply and labour charges for installation, testing &commissioning of 63A MV cubical panel board, dust& vermin tight proof,powder coated front opening type, cable bottom entry type, wall mounted using nuts & bolts, stenciling all identification etc.. Confirming to IS1863,IE rules Incomer - 63A 4P 25KA MCCB - 1Nos 63A porcelain cut out fuse and provision for kwh metering. -1No. Outgoings 63A 4P 18 kA MCCB - 1 No. 32A 4P 18 kA MCCB- 1 No(For solar) All MCCBs are with rotary operating handle for door interlock. Busbar :63A TPN Al busbar
MSB Supply,Installation,Testing and commissioning of 63 A MV Cubicle panel. Fabricated out of 16 swg CR CA sheet, powder coated dust and vermin tight proof ,front opening type,cable bottom entry flush and floor mounted free standing on 4” MS channel directly bolted to floor using nuts and bolts stenciling all identification etc.. confirming to IS1863, IE rules . Incomer 63A 4P COS-1No. RYB pilot lamp controlled with 2A MCBs- 2set Outgoings 63A TPN MCB -1No. 25A TPN MCB -1Nos. 32A TP MCB-1No. Busbar :63A TPN Al busbar
PUMP PANEL Supply, Installation, Testing and commissioning of 63 A MV Cubicle panel. Fabricated out of 16 swg CR CA sheet, powder coated dust and vermin tight proof ,front opening type, flush and floor mounted free standing on 4” MS channel directly bolted to floor using nuts and bolts stenciling all identification etc.. confirming to IS1863, IE rules . Incomer 63A TPN ISO - 1Nos. Outgoings 25A TP MCB with DOL starter - 7Nos. Push button station for starters- 14Nos 1KVAr Capacitor- 12Nos 2KVAr Capacitor- 2Nos 25A CAM operated rotory switch-7Nos 16A TP MCB-3 Nos. Busbar :63A TPN Al busbar
Cabling Supply and laying of LT XLPE insulated, extruded, filled with moisture absorbent filler, tightly wounded, AL stranded conductor armoured cable, for working voltage up to 1100V, freely clamped on cable tray/wall or through trench, neatly dressed as required.
90.12.7.42 4X25 sqmm
90.12.7.39 4x10 sqmm
90.12.7.12 3x4 sqmm
90.6.5.11 3x1.5 sqmm
End termination Supply and fixing cable glands for different cables mentioned below using single compression brass cable gland, compression type aluminium crimping lugs, gland earthing of adequate size, etc. complete
9.2.30 4X25sqmm
90.12.7.39 4x10 sqmm
Earthing Supply and installation of earthing station as per the general specification and IS : 3043/87
5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Earth Grids Supply and labour charges for Laying in ground /clamping on tray/wall & giving terminations with necessary cu sockets, brass nuts & bolts for the following copper/strip wires for effective earthing of earth pits, panels, generator, DBs and other equipment.
90.16.3.9 Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)
90.16.1.3Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor ( 10 SWG)
Diesel generator Supply and Labour for Installation, testing& commissioning of 3 phase 25KVA Diesel generator, including required earthing, power/control cabling, terminations including getting the necessary clearance/ approval of generator from electrical inspectorate, testing of neutral CT, relays, meters etc.. as required[statutory charges shall be borne by the clients on production of valid proof][ Mechanical erection of packaged generator will be done by the generator supplier
Distribution board
2.4.4 supply and fixing of following way ,horizontal type three pole and neutral,sheet steel mcb distribution board,415volts,on surface/recess,complete with tinned copper bus bar,earth ,din bar,interconnections,powder painted including earthing etc as required.(but without MCB/RCCB/ISOLATOR) 4way(4+12way),double door
2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
2.15.1 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps
WIRING
1.10.1 Supply and labour charges for Wiring of light points including exhaust fan with 2 runs of 1sq.mm FRLS pvc Cu. Wire with same wire as earth through 20mm medium PVC conduit with metal box, modular switches, plates and all accessories up to a length of 6 meters.
1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
1.10.1 supply and labour charges for Wiring of fan points with step type regulator with 2 runs of 1sq.mm FRLS pvc Cu. Wire with same wire as earth through 20mm medium PVC conduit with metal box, modular switches, plates and all accessories up to a length of 6 meters.
1.25 Supply and labour charges for two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required
Supply and labour charges for Fixing of
90.2.1.13 Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories). Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.
1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
90.2.1.11 Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories). Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator - Medium Point.
supply and fixing of IP 65junction box suitable for connecting 3x1.5 sqmm cu cable
CIRCUIT WIRING
1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire
1.14.2 Supply and labour charges for Wiring of 2 runs of 2.5sq.mm pvc cu wire with same wire as earth through 20mm medium pvc conduit with all accessories in open wall/concealed
FITTINGS Supply and Labour for fixing, testing and commissioning of following fixtures with all necessary accessories including cutting of false ceiling etc.
26w tube with housing wiproLL20-221-XXX-65NE3 wall/ceiling mount
18w Bulk Head/ Exterior light Wipro/philips
Ceiling fan 1200 mm (Bajaj Harrier Silky White Ceiling Fan SKU: 250869)
90.15.4.6 Supply Conveyance, installation, testing and commissioning of 70W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
90.15.3.8 Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector foundation bolt 4 Nos fixed in existing RCC foundation and junction box etc. complete 8 Meters
Miscellaneous
Supply and labour charges for Laying chequered plate for covering cable trenches as per required sizes
Supply and fixing of LT danger boards
Supply and fixing of shock treatment chart in glass with frame
supply and fixing of 440 V grade synthetic insulated mat 2 meter x 1 meter x 6mm conforming to IS:15652:2006
Supply and Fixing of 5kg dry powder fire extinguishers on clamp.
Supply and Fixing of 2Nos .9litres red colour fire bucket on stands
Supply and Fixing of laminated schematic drawings
PLUMBING WORK
od 01 Providing and fixing uPVC pipes including jointing of pipes with one step upvc solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25mm dia 10Kgf/cm2
od02 Providing and fixing uPVC pipes including jointing of pipes with one step upvc solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32mm dia 10Kgf/cm2
od03 Providing and fixing uPVC pipes including jointing of pipes with one step upvc solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50mm dia 10Kgf/cm2
od04 Providing and fixing uPVC pipes including jointing of pipes with one step upvc solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63mm dia 10Kgf/cm2
od05 Providing and fixing uPVC pipes including jointing of pipes with one step upvc solvent cement and testing of joints complete as per direction of Engineer-in-Charge 90mm dia 6Kgf/cm2
od06 Providing and fixing uPVC pipes including jointing of pipes with one step upvc solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110mm dia 6Kgf/cm2
MECHANICAL WORKS
Sewage Transfer pump -Providing, fixing, testing and commissioning fully submersible Self priming, non clog centrifugal sewage transfer pump capable of handling soilds upto 30-40 mm for raw sewage transfer from anoxic equalization tank to MBBR tank. CI construction, bronze impeller,complete with 3 phase motor, SS shaft, with automatic pedestal coupling, delivery bend, required wire chain, washers, SS bolts etc including Double Flange DI/CI PN 1 rating sluice valves and NRVs, Pressure gauges, suitable for operation on 415+/-10% volts, 50 HZ, AC power supply etc. Capacity -35.6 m3/hr, Head - 15m Pump (3HP) Make: KOS/ Kirloskar/ Crompton/ Equivalent
Sludge Transfer pump -Providing, fixing, testing and commissioning Self priming, non clog centrifugal sludge transfer pump capable of handling soilds upto 30-40 mm for raw sewage transfer from Primary Sellting Tank to Sludge Holding Tank. CI construction, bronze impeller,complete with 3 phase motor, SS shaft, with automatic pedestal coupling, delivery bend, required wire chain, washers, SS bolts etc including Double Flange DI/CI PN 1 rating sluice valves and NRVs, Pressure gauges, suitable for operation on 415+/-10% volts, 50 HZ, AC power supply etc. Capacity -1.2 m3/hr, Head - 25m Pump (0.5HP) Make: KOS/ Kirloskar/ Crompton/ Equivalent
Sludge Transfer pump -Providing, fixing, testing and commissioning Self priming, non clog centrifugal sludge transfer pump capable of handling soilds upto 30-40 mm for raw sewage transfer from pumping from Secondary Sellting Tank to Sludge Holding Tank. CI construction, bronze impeller,complete with 3 phase motor, SS shaft, with automatic pedestal coupling, delivery bend, required wire chain, washers, SS bolts etc including Double Flange DI/CI PN 1 rating sluice valves and NRVs, Pressure gauges, suitable for operation on 415+/-10% volts, 50 HZ, AC power supply etc. Capacity -36 m3/hr Head - 20 m Pump (4HP) Make: KOS/ Kirloskar/ Crompton/ Equivalent
Manually operated coarse screen ( effluent from complex)- Supplying all materials, fabricating, fixing and commissioning of Manual SS course Screen of following or nearest suitable size made of flats having bar thickness of 10 mm and 20 mm clear space across the screen chamber channel (fixed type) at 45° inclination including cost of screen grab bucket and arrangement suitable for fixing bar screen inside a chamber of size 1.1x0.3 m for manual scrapping clogged materials as per drawings, tender specifications and as directed by Engineer in Charge
Manually operated coarse screen (sullage)- Supplying all materials, fabricating, fixing and commissioning of Manual SS course Screen of following or nearest suitable size made of flats having bar thickness of 10 mm and 20 mm clear space across the screen chamber channel (fixed type) at 45° inclination including cost of screen grab bucket and arrangement suitable for fixing bar screen inside a chamber of size 0.8x0.5 m for manual scrapping clogged materials as per drawings, tender specifications and as directed by Engineer in Charge
Bubble Diffuser for MBBR Tank- Supplying at site, erection, testing & commissioning of Fine Bubble Diffuser (retrievable type using rope and pulley arrangement) for the aeration system for the MBBR Tank (2Nos) with diffusers of size 90 mm X 1000mm and made of EPDM capable of handling 10 cum/hr per diffuser of air. Air dispersion grid system shall be assembled in modular form with SS tee 1" x 1 ", SS lifting hook 8 mm, SS foundation bolt 6 mm, SS C clamp suitable for 1" O.D, hose, PP Rope, PP swivel nut, PP sleeve, Silicone Washer, SS hose clamp Make : Astral/ supreme for aeration grid/ Scoger/ Rehow/ Proflex for diffusers
Bubble Diffuser for Equalisation Tank- Supplying at site, erection, testing & commissioning of Fine Bubble Diffuser (retrievable type using rope and pulley arrangement) for the aeration system for the Equalisation tank with diffusers of size 90 mm X 1000mm and made of EPDM capable of handling 10 cum/hr per diffuser of air. Air dispersion grid system shall be assembled in modular form with SS tee 1" x 1 ", SS lifting hook 8 mm, SS foundation bolt 6 mm, SS C clamp suitable for 1" O.D, hose, PP Rope, PP swivel nut, PP sleeve, Silicone Washer, SS hose clamp Make : Astral/ supreme for aeration grid/ Scoger/ Rehow/ Proflex for diffusers
Air Blower for MBBR and equalizaton tanks- Supply, installation, testing, commissioning of Non-clog, Twin type rotary air blowers with casing-CI, shaft-Alloy steel, capable of delivering 131 cum/hr(each) of free air coupling to a TEFC motor of suitable HP suitable for 415+= 10% volts, 3 phase AC su[pply complete with following accessories with acoustic canopy, air filter, motor of 1500 rpm , pulleys, rotary type pressure gauges, pressure relief valve, acoustic hood, suction silencer with suitable flanges, common motor and compressor base frame with motor belt tightening arrangement interconnecting line with flanges including all accessories complete as per technical specification or as Directed by Engineer in Charge. Installed in RCC foundation with suitable size of bolts. Make : KAY/Kaiser/ equivalent Capacity: 131 m³/hr. Pressure: 0.6 kg/sqcm Motor : three phase motor with IP 68 Protection 5.5HP(1W + 1 S)
Filter press feed pump- Supply at site,erection, testing and commissioning of self priming, non clog centrifugal fully submersible sewage for rated continuous duty and efficiency (from reputed manufacturers complying to IS 1520 and conforming to other relevant standards), CI construction, bronze impeller,complete with 3 phase motor, SS shaft, with automatic pedestal coupling, delivery bend, required wire chain, washers, SS bolts etc including Double Flange DI/CI PN 1 rating sluice valves, Pressure gauges, Double Flange DI/CI PN 1 rating NRVs with DI/I/Pipes connecting common delivery suitable for operation on 415+/-10% volts, 50 HZ, AC power supply etc. complete in all respects with detachable arrangements, level indicators for automatic switch on & switch off as required by the standard specifications complete with all accessories as per technical specification or as directed by Engineer In Charge.Pumps shall have dry run protection & high/ low level alarm. Electrical Control panel shall be supplied with the pump as per the specifications in the Electrical BOQ Capacity: 0.5 m³/hr Pump (0.5 HP) Head: 20 m. Motor : three phase motor with IP 68 Protection
Pressure Sand Filter- Supply, Installation and erection, testing and comitioning of of Pressure Sand Filter - PE- FRP composite vessel construction. Filter to be of composite FRP construction with multiport valve for operations. Suitable stand / support should be provided along with the filter. Filtration rate should not be greater than 13 m3/hr / sq.mt of the filtration area. Dirt loading capacity to be sufficient to initiate backwash once in 8 hours i.e. once / shift. Filter to have inlet and outlet piping, inlet and outlet for backwash and air vent. Sand filter to be fitted with pressure guage at inlet and outlet – 0 – 7 bar (3.5 bar), 1.5” dial, glycerine filled SS Bourdon guage. Sand filter main header is to be fitted with FLOW METER – turbine type / rotameter type with range up to minimum of 125% of the rated flow through the pipe line. Media to consist of graded pebble, coarse and fine sand. Depth of media to be as per recommendations provided in CPHEEO manual. 60” dia x 70” HOS model 6070 with multiport valve and distributors. Top mounted FRP construction with epoxy coating inside and anti corrosive treatment outside, two coats of paint outside withstand a minimum test pressure of 7.0Kg/cm² with as operating pressure of 3.5 Kg/cm² with 4.0 Kg/cm² media of Quartz/ Fine and graded Sand.
Activated Carbon Filter- Supply, Installation and erection, testing and comitioning of Activated Carbon Filter - PE-FRP composite vessel construction. Filter to be of composite FRP construction with multiport valve for operations. Suitable stand / support should be provided along with the filter. Filtration rate should not be greater than 15 m3/hr / sq.mt of the filtration area. Filter to have inlet and outlet piping, inlet and outlet for backwash and air vent. Carbon filter to be fitted with pressure guage at outlet – 0 – 7 bar, 1.5” dial, glycerine filled SS Bourdon guage Media to consist of graded pebble, coarse, fine sand and activated carbon. Depth of media to be as per recommendations provided in CPHEEO manual. Activated carbon should have Chlorine Halving value not more than 10 cms and should have Iodine Number not less than 900. Preferred make of carbon is CALGON / JACOBI / NORIT only. 60"dia x 70"shell height HOS model 6070 with multiport valve and distributors. Top mounted FRP construction with epoxy coating inside and anti corrosive treatment outside, two coats of paint outside withstand a minimum test pressure of 7.0Kg/cm² with as operating pressure of 3.5 Kg/cm² with 4.0 Kg/cm² media of Activated Carbon (Iodine Value 1050mg/gm)
Filter feed pumps- Supply & Installation of 16 m3/hr, 30 mwc, horizontal centrifugal, closed CI impeller , clear water monobloc pumps fitted with TEFC, IP 55, Class F insulated SQI motor, suitable for 3 phase, 50 Hz, 415v AC power supply. Pump discharge common header to be fitted with pressure guage 0- 7 bar, 1.5” dial, SS Bourdon type glycerine filled guage. Pump to be fitted with DRY RUN TRIP with level switch.Pump (3.5HP)
Filter Press- Supply, Installation and erection, testing and comitioning of filter press system. Filter Press will be manual, recessed type press with MS fabricated structure pipe button surface and MS flat parallel bar, with PP cloth. Each batch will be of 4 hours duration and 1 batches are expected in a day. Water with 1.5% w/v inlet solids is expected and the outlet cake consistency should not be more than 36.8% moisture. 24 chambers of size 610mm x 610mm and with active surface area not less than 0.78 m2 is to be provided with quantity 200 Ltr. FRP drip tray with drain valve is also to be provided. Filter Press will have center inlet and four corner outlet.The Filter Press Unit will be mounted on a platform and all around drain system to be provided to prevent the filtrate water from contaminating the entire surroundings.4000 lph filter press as per technical specifications with semi automatic operations.
SS Gates( sullage)- Supplying at site, installation testing and commissioning of all materials, fabricating, fixing and commissioning of spindle operated open channel sluice gates/shutter of DI make with a peak flow of 145LPS and velocity less than 1m/s at the inlet and outlet of the screen channel to suit the channel sizes as per drawings, tender specifications and as directed by Engineer in Charge Size 0.20 X 0.25m
SS Gates (effluent from complex)- Supplying at site, installation testing and commissioning of all materials, fabricating, fixing and commissioning of spindle operated open channel sluice gates/shutter of DI make with a peak flow of 145LPS and velocity less than 1m/s at the inlet and outlet of the screen channel to suit the channel sizes as per drawings, tender specifications and as directed by Engineer in Charge Size 0.30 X 0.30m
Chlorine dosing system- Supply, installing, testing and commissioning of electronic chemical solution dosing system comprising of electronic metering pump(with both frequency and stroke length controls to control the dosage rate between 10-100% of rated maximum capacity) virgin HDPE chemical grade solution tank of 100 litre capacity, neccessary injection fitting asembly foot valve cum strainer and suction and delivery piping etc. upto the point of injection complete in all respects as required. Make: Mitron Ray/i Dose/ E-Dose equivalent, capacity 5-10 LPH, enable to get residual chlorine 0.20 ppm
MBBR media- Supplying and fixing of non-clogging freely moving biomass media of polypropylene construction Sp.Gravity 0.93 for MBBR reactor with surface area 400 m²/m³, length 16-20 mm, dia 22 mm complete as per technical specification or as directed by Engineer in Charge
Electromagnetic Flow meter- Supply and erection of electromagnetic flow meter with flow recorder, digital flow indicator, flow integrator with sensors, totaliser, transmittal and display arrangements and all accessories including housing arrangements, etc. complete to fix in the incoming pipeline to STP or at the Screen channel as directed by the Engineer in Charge
O&M FOR ONE YEAR
A. PAVITHRA PANICKER
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .