Construction of volleyball court, boundary wall, and SITC of external stadium flood lighting work at Biju Patnaik Hockey Stadium for RSPL at Rourkela.

Grand Total A 27,34,398.99

Grand Total B 23,45,367.49

Grand Total C 3,47,39,007.45

Providing and laying in position cement concrete of specified grade

14 4.1 excluding the cost of centering and shuttering - All work up to plinth level :

Digitally signed by Rakesh

2023 Rate Amount

S.No. DSR 2023 Description of Indicative Items Unit Qty

excluding without GST

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources :

14.1 4.1.8 8 graded stone aggregate 40 mm nominal size derived from natural

Providing and placing in position 100 mm thick factory made

machinebatched & machine mixed Precast RCC Rectangular Covers on

drains of footpath of various sizes, of M-25 grade cement concrete for

RCC work, including cost of centering, shuttering, reinforcement of 8 mm

dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways ,

neat cement punning on finished surface, properly

encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly

painted over priming coat , reinforcement to be welded at edges with MS

sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of

cartage, all leads & lift, handling at site etc. all complete as per direction of

Engineer-in-Charge.

Providing and laying 60mm thick faciory made cement concrete

interlocking paver block of M -30 grade made by block making machine

with strong vibratory compaction, of approved size, design

& shape, laid in required colour and pattern over and including 50mm thick

compacted bed of coarse sand, filling the joints with line sand etc. all

complete as per the direction of Engineer-in-charge. sqm 823.73 120.00 98847.46

Providing and fixing G.I. chain link fabric fencing of required width in

mesh size 50x50 mm including strengthening with 2 mm dia wire or

nuts, bolts and washers as required complete as per the direction of

Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to

outer dia not less than 5 mm in required colour and shade sqm 904.32 78.00 70537.12

Total of Schedule Items 1414578.23

NON SCHEDULE ITEM

Rate NS Amount

S.No. NS Code Description of Indicative Items Unit

without GST without GST

Plastic Chairs in HDPE material including fixing in all respect as per

direction of Engineer in charge Nos 2118.64 26.00 55084.75

Volleyball Post

supplying and Installation of Removable Volleyball Post comes with dia 76

mm outer pole with red powder coating and Dia 60 mm adjustable upright

22 NSI 2 with zinc plating. Height can adjust 2M to 2.5m by manual pin locking

Volleyball post fixed by using ground sleeves with holdfastand concrete.

Manual winch is provided for tightening the net. Pair 122881.36 1.00 122881.36

Tournament Volleyball Net

9.5 to 10 m in length and 1 m wide including fixing in all respect as per Nos 5084.75 1.00 5084.75

24 NSI 4 direction

Umpire's of Engineer

Chair in charge

with Ladder Nos 25423.73 1.00 25423.73

25 NSI 5 Acrylic distemper paint for Ground marking lines including marking in all Job 16949.15 1.00 16949.15

SITC of as per direction

Volleyball of Engineer

Electronic in charge

LED metal rectangular remote operated

26 NSI 6 Score Board complete in all respect as per direction of Engineer in charge

NS-7 Supply, installation, testing and commissioning of Acreylic signage as per sqft 2245.76 35.00

the subject matter to be written as finalized/ directed by client/NBCC with

requisite support frame/handing arrangement including proper

illumination (lights to be fixed within the letter), with necessary screw,

accessories, electrical wire connection, switch, plug etc. complete in all

respect as per direction of Engineer in charge(minimum 02 years

replacement warranty shall be provided by the LED backlid manufacturer

as per the list of make of material) 78601.69

Total of Non Schedule Items 323347.46

Total (Schedule + Non Schedule) Items 1737925.69

Digitally signed by Rakesh

Electrical Volleyball court

AS PER DSR-2022 AS PER MARKET RATE

S.NO DESCRIPTION OF ITEM UNIT QTY. Rate without AMOUNT Rate without

ITEMS AMOUNT (RS.)

GST (RS.) GST

SUB HEAD-I : EXTERNAL LIGHTING

1) NS-1 Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copper conductor armoured cables

suitable for working voltage upto and including 1100 Volts complete as required and as per specifications.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size

2 direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as

DSR-2022- Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size

in the existing RCC/ HUME/ METAL pipe as required.

DSR-2022- Upto 35 sq. mm

4) NS-2 Termination of the following sizes of XLPE insulated Aluminium/ Copper conductor cable including providing

terminal lugs,double compression gland , crimping the joints ,providing insulation tape,effecting terminal

connections to the equipment complete as required.

a 2 x 6 sq,mm, Al conductor cable Nos. 12 694.74 8,336.85

5) Supply, laying and termination of the following sizes of 650/1100 volts grade PVC insulated copper conductor

wires in existing conduits including end terminations with copper lugs.

a. DSR-2022- 3 x 2.5 sq.mm. Copper conductor ,PVC insulated PVC sheathed wires RM 80

b. DSR-2022- 2 X 6 sq. mm PVC insulated copper conductor wire along with 1 X 2.5sq.mm PVC insulated copper conductor RM 110

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC

7 collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling

etc as required.

DSR-2022- 100mm dia

8) NS-3 Supply,fixing and laying of Heavy duty PVC pipes complete buried in floor with joints and other accessories as

a) 63 mm dia, 2mm thick RM 110 79.36 8,729.15

10) NS-4 Supply of LED Sports 500W Floodlight with high-power LED shall be made of Single/Modular housing

noncorrosive aluminium die cast PC Modular lens plate with toughened glass to ensure better uniformity of

lighting distribution.,suitable for 15/30/10 degrees. All Lens should be screw fitted on the housing to ensure the

proper mechanical alignment to increase the rigidity of fixing of lens to get the unify photometry distribution.

Designed heat sink for efficient thermal management along with safety chain. The luminaire should be IP66 and

IK07 suitable and detachable separate compartment for driver considering ease of maintenance. Same housing

should be compatible with different beam angle. LED Floodlight luminaire shall have CRI > 70 and CCT >

5700 K (tolerance on CCT: +/- as per ANSI C78:377A), SDCM (Mac Adam Ellipse): < 5. The system Efficacy

of the luminaire shall be typical > 110 Lumen/Watt. The luminaire shall be designed to ensure lumen

depreciation of up to 30% over 50K burning hrs at designed ambient temperature 35 Deg Celsius. The driver

shall have a power factor of >0.95. THD of the driver < 10%, EMI/EMC compliance. The driver shall have Over

Temperature, Under Voltage/Short Circuit, Over Voltage/Open Circuit and Output failure protections, with an

Efficiency of > 90%. Driver can withstand high voltage up to 440V for > 24 Hrs. The floodlight and external

driver (should be potted for better reliability) shall comply to Class-I electrical insulation class. Inbuilt driver

surge protection of minimum 6KV must . Driver is having voltage ripple < 1% (peak to average) and output

current ripple < 5% (peak to average). Driver is having over heating protection circuit (thermal fold back > 75

Deg Celsius) which ensure the safety of luminaire and surrounding. The average lumen maintenance summary

needs to be submitted at the different case temperature (soldering point) at Ts: 55, 85 and 105 Deg Celsius. All

plastic parts, cable used etc. shall be UV protected. Input cable of luminaire should be rubber as per IS 10322

(part 5/section 5). The luminaire should comply with all the required IEC & IS standards. LM79 (C type Gonio

Photometry IES LM 79 -19) & LM80 report must be submitted from a NABL accredited lab. Luminaire and

Driver must have BIS certificate.

16) Feeder Piller (volleyball Ground)

NS-5 Design, manufacture,Supply, Installation, testing and commissioning at works of Double door panel fabricated

with minimum 2mm thick CRCA sheet, Conform to IS Specification, with IP-55 enclosure protection, as per IS-

2137(Revised), floor mounting free standing on a suitable massanory pedestal outdoor type panel,provided

with hinged detachable and lockable outer opening doors with the following incoming/outgong MCCB/ MCBs

mounted therein including making connections/ interconnections, earthing, painting etc. as required.The panel

shall have canopy arrangement on the top.All MCB to be C curve .

a. Feeder Pillar - X

The incoming shall comprise the following :-

1 No 63A FP MCB, 16 KA service breaking capacity with heavy duty solid neutral link alongwith Earth fault

relay and CBCT.

Metering for incoming:

Digital Multifunction meter (MFM-4) with RS-485 communication port for measurement of PF, V, A & Hz ,

equivalent to EM6459, with CT as required.

Phase indicating lamps RYB with 2 Amps SP MCB back up.

80 Amps TPN Aluminium Bus Bars of suitable length Bus bars shall be colour coded and insulated by heat

shrinkable sleaves & clip on shrouds for joints. The current density of Bus bar shall be 0.8 sq.mm./amp.

Outgoing (All MCB shall be suitable for motor duty & with heavy duty detachable solid neutral link ):

ii. 20 nos 25A DP MCB 10 KA breaking capacity controlled by and including providing 40 DP MCCB, 40 A DP

contactor and Timer.

NS-5. Feeder Pillar - X described as above and all as per specification. Set 1 1,22,881.36 1,22,881.36

NS-6 Supply, installation, Testing & commissioning of Octagonal G.I. poles with galvanised mounting bracket with nos 6 11,186.44 67,118.64

required accesseries to accomodate street light fitting complete with base plate, finial taper

plug, bolts, nuts, junction box within the pole for incoming and outgoing cables (size up to 2 C x 6 Sqmm) and a

10 amps SP MCB and screws as specified in type HM1107 P - 9.0 mtr. Long.

Bottom diameter- 150 mm Top diameter- 75 mm Nos of foundation bolts- 04 PCD of foundation Bolts- 240x240

mm Bolt diameter - 16mm Rate shall included the cost of inbuilt junction box (weather proof), (6- 32A) MCB to

fitting with 2.5 sq mm copper wires (2 Nos. 2.5 Sq.mm copper wire for phase & 1 No. 1.5 Sq.mm copper wire

for earthing) complete with base plate made from concrete civil foundation works . The pole shall be painted

with final PU Paint as required. 9.0 m long pole with double arm for mounting the light .The work shall include

all civil and allied work complete in all respect as per direction of engineer in charge

9.0 m long pole with single arm for mounting the light .

20) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry

enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ Set 2 6,332.20 12,664.41

coke and salt as required.

21) Supply and fixing in position the following G.I. tape/wires including providing all fixing accessories and effecting

proper connections.

a. DSR-2022- Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection

5.11 with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

b. DSR-2022- Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including RM 15 648.31

5.7 connection/ termination with GI thimble etc. as required.

AS PER DSR-2022 AS PER MARKET RATE

S.NO DESCRIPTION OF ITEM UNIT QTY. Rate without AMOUNT Rate without

ITEMS AMOUNT (RS.)

GST (RS.) GST

FANS & LIGHT FIXTURES:

1 NS-7 Supply, installation, testing & commissioning of 4 FT TUBE LIGHT Each 4.00 677.97 2,711.86

Supply installation testing and comissioning LED Tube, Wall / Surface / Celling Mounted, 10W(MIRROR

LIGHT), luminous flux of luminaire 900lm, IP 20,1200mm, Direct light emission, 230V, Electronic Control

Gear, 5700K, Satin Diffuser, L=600mm (Min)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush

Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2

nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value

(CM/M/W) minimum 6.00, Air delivery

10 NS-9 minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic Each 4 2,372.88 9,491.53

regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers,

temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz,

single phase AC

Supply, earthing etc. complete as required.

Construction of Volley ball court, RR boundary wall and SITC of external lighting work at Biju Patnaik Hockey

Stadium for RSPL at Rourkela

2023 Rate Amount

S.No. DSR 2023 Description of Indicative Items Unit Quantity

excluding without GST

Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means in foundation trenches or drains (not exceeding 1.5 m in

width or 10 sqm on plan), including dressing of sides and ramming of

bottoms, lift upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth, sides

of foundations etc. in layers not exceeding 20cm in depth, consolidating

2 2.25 each deposited layer by ramming and watering, lead up to 50 m and lift

Centering and shuttering including strutting, propping etc. and removal of

form for all heights : 0.00

5.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm. 332.33 363.48 120795.49

Centering and shuttering including strutting, propping etc. and removal

of form for Lintels, beams, plinth beams, girders, bressumers and

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels,

bands, plain window sills, staircases and spiral stair cases above plinth

level up to floor five level, excluding the cost of centering, shuttering,

5.3 finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse

sand(zone-III) derived from natural sources : 3 graded stone aggregate

20 mm nominal size derived from natural sources).

Providing and laying in position specified grade of reinforced cement

5.1.2 concrete, excluding the cost of centering, shuttering, finishing and

reinforcement - All work up to plinth level : cum 7665.89 21.55 165169.26

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level. kg 91.40 3954.60 361443.74

Providing and laying in position cement concrete of specified grade

14 4.1 excluding the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources :

14.1 4.1.8 8 graded stone aggregate 40 mm nominal size derived from natural

Brick work with common burnt clay F.P.S. (non modular) bricks of class

15 6.1 designation 7.5 in foundation and plinth in:

15.1 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 6246.31 43.20 269840.75

Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level in

16 6.4 all shapes and sizes in :

16.1 6.4.1 Cement mortar 1:4 (1 Cement : 6 coarse sand) cum 7918.94 72.00 570163.73

Steel work welded in built up sections/ framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works kg 146.27 450.00 65822.03

13.1 12 mm cement plaster of mix : 0.00

Digitally signed by Rakesh

2023 Rate Amount

S.No. DSR 2023 Description of Indicative Items Unit Quantity

excluding without GST

Providing and fixing concertina coil fencing with punched tape concertina

coil 600 mm dia 10 metre openable length ( total length 90 m), having 50

nos rounds per 6 metre length, upto 3 m height of wall with existing angle

iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T.

reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain

18 16.53 horizontal, including necessary bolts or G.I. barbed wire tied to angle iron,

all complete as per direction of Engineer-in-charge, with reinforced barbed

tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of

165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre

(cost of M.S. angle, C.C. blocks shall be paid separately) metre

Total of Schedule Items 1987599.57

Digitally signed by Rakesh

SCHEDULE OF QUANTITIES FOR SUPPLY, ERECTION, TESTING AND COMMISSIONING

AS PER DSR-2022 AS PER MARKET RATE

DSR Rate without

S.NO DESCRIPTION OF ITEM UNIT QTY. Rate without AMOUNT Without GST

GST (RS.) AMOUNT (RS.)

EXTERNAL LIGHTING

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30

1 2.6 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth

lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not 115.20

exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and

lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm 4.00

nominal size derived from natural sources) cum 5772.88 23091.53

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

2.26.1 All kinds of soil Cum 96 107.46 10315.93

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,

shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources) cum 44 7657.42 336926.27

Steel reinforcement for RCC work Thermo mechanically treated bar of grade Fe 550D or more upto plinth and

foundation Kg 5500 91.40 502690.68

5.9 Centering and shuttering including strutting, propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass sqm 13

concrete 332.33 4320.30

1) MR 1 Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copper conductor armoured cables

suitable for working voltage upto and including 1100 Volts complete as required and as per specifications.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size

2 direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as

DSR-2022- Upto 35 sq. mm 40

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size

in the existing RCC/ HUME/ METAL pipe as required.

DSR-2022- Upto 35 sq. mm 35

4) MR 2 Termination of the following sizes of XLPE insulated Aluminium/ Copper conductor cable including providing

terminal lugs,double compression gland , crimping the joints ,providing insulation tape,effecting terminal

connections to the equipment complete as required.

a 2 x 6 sq,mm, Al conductor cable Nos. 350 694.74 2,43,158.05

5) Supply, laying and termination of the following sizes of 650/1100 volts grade PVC insulated copper conductor

wires in existing conduits including end terminations with copper lugs.

AS PER DSR-2022 AS PER MARKET RATE

DSR Rate without

S.NO DESCRIPTION OF ITEM UNIT QTY. Rate without AMOUNT Without GST

GST (RS.) AMOUNT (RS.)

a. DSR-2022- 3 x 2.5 sq.mm. Copper conductor ,PVC insulated PVC sheathed wires RM 500

b. DSR-2022- 2 X 6 sq. mm PVC insulated copper conductor wire along with 1 X 2.5sq.mm PVC insulated copper conductor RM 7,700

6) Supplying and fixing in position of the following sizes of GI conduit buried in ground 600 mm deep including

all accessories complete as required and as per specifications.

a. DSR-2022- 25 mm dia GI conduit RM 500

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC

7 collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling

etc as required.

DSR-2022- 100mm dia 35

DSR-2022- 250mm dia 30

8) MR 3 Supply,fixing and laying of Heavy duty PVC pipes complete buried in floor with joints and other accessories as

12) MR 4 Supply of LED Sports 1500/1600W Floodlight with high-power LED shall be made of Single/Modular housing 188

noncorrosive aluminium die cast PC Modular lens plate with toughened glass to ensure better uniformity of

lighting distribution.,suitable for 15/30/10 degrees. All Lens should be screw fitted on the housing to ensure the

proper mechanical alignment to increase the rigidity of fixing of lens to get the unify photometry distribution.

Designed heat sink for efficient thermal management along with safety chain. The luminaire should be IP66 and

IK07 suitable and detachable separate compartment for driver considering ease of maintenance. Same housing

should be compatible with different beam angle. LED Floodlight luminaire shall have CRI > 70 and CCT >

5700 K (tolerance on CCT: +/- as per ANSI C78:377A), SDCM (Mac Adam Ellipse): < 5. The system Efficacy

of the luminaire shall be typical > 110 Lumen/Watt. The luminaire shall be designed to ensure lumen

depreciation of up to 30% over 50K burning hrs at designed ambient temperature 35 Deg Celsius. The driver

shall have a power factor of >0.95. THD of the driver < 10%, EMI/EMC compliance. The driver shall have Over

Temperature, Under Voltage/Short Circuit, Over Voltage/Open Circuit and Output failure protections, with an

Efficiency of > 90%. Driver can withstand high voltage up to 440V for > 24 Hrs. The floodlight and external

driver (should be potted for better reliability) shall comply to Class-I electrical insulation class. Inbuilt driver

surge protection of minimum 6KV must . Driver is having voltage ripple < 1% (peak to average) and output

current ripple < 5% (peak to average). Driver is having over heating protection circuit (thermal fold back > 75

Deg Celsius) which ensure the safety of luminaire and surrounding. The average lumen maintenance summary

needs to be submitted at the different case temperature (soldering point) at Ts: 55, 85 and 105 Deg Celsius. All

plastic parts, cable used etc. shall be UV protected. Input cable of luminaire should be rubber as per IS 10322

(part 5/section 5). The luminaire should comply with all the required IEC & IS standards. LM79 (C type Gonio

Photometry IES LM 79 -19) & LM80 report must be submitted from a NABL accredited lab. Luminaire and

Driver must have BIS certificate.

13) MR 5 Main Lighting Panel

AS PER DSR-2022 AS PER MARKET RATE

DSR Rate without

S.NO DESCRIPTION OF ITEM UNIT QTY. Rate without AMOUNT Without GST

GST (RS.) AMOUNT (RS.)

1 No. 1000amps 4P ACB(50KA) with Micro Processor release (PRMB) with Class-C transient voltage surge

suppression device suitable for 3 phases as per specifications.

Metering And Indication for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA, harmonics upto 15th

order & %THD) with RS-485 Port.

Sets of 1000/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

1250A TPN Aluminium Bus Bar with colour coded PVC Sleeves

12No. 63amps 4P MCCB

5No. 160amps 4P MCCB

Main Lighting Panel Descrived Above De 1 4,92,193.22 4,92,193.22

17) MR 6 Feeder Piller (Hockey Ground)

Design, manufacture,Supply, Installation, testing and commissioning at works of Double door panel fabricated

with minimum 2mm thick CRCA sheet, Conform to IS Specification, with IP-55 enclosure protection, as per IS-

2137(Revised), floor mounting free standing on a suitable massanory pedestal outdoor type panel,provided

with hinged detachable and lockable outer opening doors with the following incoming/outgong MCCB/ MCBs

mounted therein including making connections/ interconnections, earthing, painting etc. as required.The panel

shall have canopy arrangement on the top.All MCB to be C curve .

a. Feeder Pillar - X

The incoming shall comprise the following :-

1 No 160A FP ATS , 25 KA service breaking capacity with heavy duty solid neutral link alongwith Earth fault

relay and CBCT.

Metering for incoming:

Digital Multifunction meter (MFM-4) with RS-485 communication port for measurement of PF, V, A & Hz ,

equivalent to EM6459, with CT as required.

Phase indicating lamps RYB with 2 Amps SP MCB back up.

200 Amps TPN Aluminium Bus Bars of suitable length Bus bars shall be colour coded and insulated by heat

shrinkable sleaves & clip on shrouds for joints. The current density of Bus bar shall be 0.8 sq.mm./amp.

Outgoing (All MCB shall be suitable for motor duty & with heavy duty detachable solid neutral link ):

ii. 57 nos 25A DP MCB 10 KA breaking capacity controlled by and including providing 40 DP MCCB, 40 A DP

contactor and Timer.

Feeder Pillar - X described as above and all as per specification. Set 4 2,38,423.73 9,53,694.92

a. 1 No. 600amps 4P MCCB(35KA) with Micro Processor release (PRMB) with Class-C transient voltage surge

suppression device suitable for 3 phases as per specifications.

AS PER DSR-2022 AS PER MARKET RATE

DSR Rate without

S.NO DESCRIPTION OF ITEM UNIT QTY. Rate without AMOUNT Without GST

GST (RS.) AMOUNT (RS.)

Metering And Indication for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA, harmonics upto 15th

order & %THD) with RS-485 Port.

Sets of 1000/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

1250A TPN Aluminium Bus Bar with colour coded PVC Sleeves

5No. 160amps 4P MCCB

ii. DG Panel Descrived Above

19)c MR 7 Supply,Installation,Testing and Comssioning of 45meter height GI Pole with suitable 1600w ,47 Light and Nos. 4 3,17,715.25 12,70,861.02

location wind pressure with all installation acessrios.

20) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry 5

enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ Set 6,332.20 31,661.02

coke and salt as required.

21) Supply and fixing in position the following G.I. tape/wires including providing all fixing accessories and effecting

proper connections.

a. DSR-2022- Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection 350

5.11 with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

b. DSR-2022- Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including RM 600

5.7 connection/ termination with GI thimble etc. as required.

MR 8 DG Set work

Supplying,loading, installation,testing & commissioning of Diesel Generating set having Prime Power Rating of

600 KVA, radiator cooled type, with Acoustic Enclosure with Silent Type silencer, 415 Voltsat 1500RPM,

0.8lagging power factor suitable for 50Hz, 3phase system and as per latest CPCB-II, 600 Ltr in built fuel

tank.The DG Set sshall be suitable for being over loaded upto10% of the rated capacity for 1hour in every 12

hour sand consisting of the followings: The DG set shall be suitable for above 0.85 loading factor with net out

put shall be 600 kVA as per site conditions with Genset governing Class G3 as perI S8528.Silent Diesel

Genset shall be provided with remote monitoring system to monitor the genset operational parameters at

desktop/ smartphones.

4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at

40Degree C, 50%RH & at 1000 MS Land conforming to BS 5514, BS 649, IS 10000, capable of taking 10%

overloading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the

required accessories.

Type: Radiator Cooled

Fuel injection :As per manufactur

AS PER DSR-2022 AS PER MARKET RATE

DSR Rate without

S.NO DESCRIPTION OF ITEM UNIT QTY. Rate without AMOUNT Without GST

GST (RS.) AMOUNT (RS.)

Engine Starting : Battery starting.

Starting position : Universal. Auto/Manual

The Engines shall include:• Flywheel with guard.• Flexible connection.• Bellow / expansion joints• Air Cleaner•

Blower fan• Electronic governor with electronic fuel injection system• Fuel and lube oil filters and pumps• Day

Fuel tank with visual level indicators etc.• Silencer as per latest amendments of MOEF/CPCB • Safety controls•

Instrument panel

•Exhaustpipingtoletouttheexhaustatmandatoryheightabovethecanopyincludingsupportarrangementandinsulation

withcladdinginside the canopy etc.

Synchronousalternatorratedat1010KVA,415voltsat1500RPM,3phase50HZ,ACsupplywith0.8laggingpowerfactor

at40DegreeC,50%RH&at1000MeterMSL.ThealternatorshallbehavingSPDPenclosure,brushless,continuousduty,

selfexcited&self-regulatedthroughsuitableAVRconformingtositeconditionandwithClass-Hinsulation.

Type : Brushless.

Actual Power 600 KVA at 40 deg C.

Frequency : 50 Cycles/sec.

Supply System: 3 phases & neutral

Connection : Star.

Rated rpm. : 1500 RPM

Casing protection : As per IP-23

Insulation : Class H.

Power Factor : 0.8.

Controller:TheDGsetsshouldbesuitableforAutoON/OFForequivalent including providing of Engine control panel.

C. ACCESSORIES:

TheDieselEngineshallbeequippedwithminimumfollowing/asindicatedinthespecifications,devices/accessoriesbuilt

-intypeincluding all standard fittings.

Fuel supply pump with manual venting pump. Set 1 32,50,508.47 32,50,508.47

Turbo charger with air filter (dry/oil bath type) and damper.

Charge air cooler.

Suction fuel filter

Lube oil filter.

Hour meter and RPM indicator.

Battery Starting Mechanism.

Instrument/Indication panel complete with the followings;

a) Starting Switch with key.

b) Lub. Oil Temp. gauge.

c) Lub. Oil Pressure Gauge.

d) Water Temp. gauge.

Control devices for safety and monitoring along with indicators.

Common base/foundation frame.

Anti vibration pads

24VDCStartingsystemcomprisingofstartermotors:Voltageregulatorandarrangementforinitialexcitationcompletewi

thsuitablenos.ofMaintenancefreebatteriesaspermanufacturerstandardsforminimum 6 no. consecutive starts as

required as per specifications.

The cost of initial charge of lubricants, coolant etc.

TheDGsetsshallincludethecostofallaccessories,fittings,protections,instruments,safetycontrols,alarms,indications

etc.complete as per specifications, as required

AS PER DSR-2022 AS PER MARKET RATE

DSR Rate without

S.NO DESCRIPTION OF ITEM UNIT QTY. Rate without AMOUNT Without GST

GST (RS.) AMOUNT (RS.)

SITC of 50 HP monoblock pump with starter, cable connection from nearby feeder and requisite civil work for set 1 1,97,872.88 1,97,872.88

MR 9 water supply at sprinkler irrigation system at Biju Patnaik Hockey stadium complete in all respect as per

direction of engineer in charge

Total of Sub-Head - V carried to summary sheet 42,13,119.45 2,52,26,717.37