Thanthoni Block - MLACDS - Construction of Mini Community Hall at Vadakupalayam AD Colony H/o Melapalayam Panchayat

Amount

Name of the Work : Construction of Mini Community Hall at Vadakupalayam AD Colony H/o Melapalayam Panchayat

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stuff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Reinforced Cement concrete 1:1.5:3, mix using 20 mm HBG Metal including cost and conveyance of all materials to site and all labour charges etc., complete.

Brickwork in CM 1:5 using country bricks ground moulded 23x11x7 cm for the following including aving etc., complete

Supplying and erecting for centering for sides soffits including Supports and Strutting upto 3.00m height for plane surfaces and all labour charges etc.,

Below GL

Above GL

Column, Lintel

Supplying and fabrication of steel including cost and conveyance of all materials to site and all labour charges etc., complete.

Paving the floor with Vertrified tiles 0.60mx0.6mx0.008m in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement as

Plastering with C.M 1:5, mix 12mm thick including cost and conveyance of all materials to site and all labour charges etc., complete.

Plastering with C.M 1:3, mix 10mm thick including cost and conveyance of all materials to site and all labour charges etc., complete.

Distembering two coats of oil bound distember using one coat of primer coat including coat & conveyance to size and all labour charges etc., complete

Painting two coats of approved emulsion paint over one priming coat of old wall surface including cleaning preparing the surface and curing etc complete.

Manufacturing supplying and fixing of steel door with following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angels of size 35x35x5mm for the shutter frames etc

Steel Door

Window

Painting two coats of new iron works such as steel doors, Windows, Ventilators, Window bars, Balustrdes etc., with best approved first quality of synthetic enemal paint of approved colour over etc

Wiring with 2 x 1.5 sq.mm(22/0.3) PVC insulated SC. Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch box inflush with wall covered hylum etc

SD 18 light & Fan Point SD 18

SD 36 PVC Plug Point SD 36

SD 87 fixing of single box type 4'36W fluorescent SD 87

Supply and run off 2* 1.5 mm 2 PVC insulated SC unsheathed Cu. Conductor of 1100 V garde in 20 mm dia GI pipe (class B ) suitably bent end with necessary angle SD 69

Supply and run off 2* 6 mm 2 (84/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V on 7/20 Gi bearer wire for service connection main SD 64

Supplying and fixing of 16AMS DPI Switch of 500volt with fuse and Neutral (side handle) on suitable TW/PWD Earthing SD 24 Service main

Supplying and fixing of 1200mm (48") AC Ceiling fan with stepped electronic 300W regulator with 1 m down rod on the existing clamp SD 106

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

NALLUSAMY P