Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.9 LAccepted-AOC | L1 | Accepted-AOC Being the lowest bidder | |
| 2 | L2₹32.8 L+₹94,052 (2.95%)Rejected-Finance 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L2 | Rejected-Finance Other than lowest bidder |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
20 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE UTILITY AMBALA
GE UTILITY AMBALA CANTT 133001
PREVENTIVE MAINTENANCE TO BOOSTER ALBERT EKKA LINE CW LINE BABYAL BOOSTER NO 15 AND REGT TANK WITH CONNECTED AND MISC ITEMS IN SECTOR B UNDER GE U AMBALA CANTT
2024_MES_660858_1
CA NO GE U AMB T 48 OF 2024-25
Open Tender
Civil Works
Item Rate
240 days
GE UTILITY AMBALA CANTT
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE UTILITY AMBALA CANTT
₹97,000
31 Aug 2024
20 Jun 2024
22 Jul 2024
20 Jun 2024
20 Jul 2024
6 Jul 2024
20 Jun 2024 - 27 Jun 2024
Amount
Taking down centrifugal pump set form foundation existing position and transport to work shop for rewinding, replacement of spare parts as & when required as directed by Engineer in Charge and re-assembling/ re-installing the pump set in original position for pump capacity 40HP/30HP/20HP/16HP complete all as specified and directed. Note : (a) Spare parts, winding wire required for renewal shall be measured and paid separately. (b) Necessary thimbles, lugs, insulation tape, nut bolts all items required and transportation charge for installation of motor at site will be included in the rate quoted by the contractor. No extra payment will be done to contractor. (c) After dismantling of induction motor repair of PCC foundation work will be executed with replacement of base frame of angle iron of existing size of angle if found damaged or deformed. PCC and base frame angle iron will be measured and paid separately under respective items.
Dismantling and opening the 40HP, 3 phase motor from pump set in existing position for carrying out rewinding work with super enamelled copper wire of suitable guage as per existing and heat varnishing with all other material and transport back to site after testing commisioning complete all as specified and directed. Note : (a) The Motor testing will be done before installation on No load for any unbalance load and should be free from vibration and if found unsatisfactory no payment will be done to contractor for defected motor.
All as per srl item No 2.00 here in before but of capacity 30 HP
All as per srl item No 2.00 here in before but of capacity 20 HP
All as per srl item No 2.00 here in before but of capacity 16 HP
Supply only impeller CI, spare part for pump set including motor complete for 40 HP Centrifugal pump complete all as specified and directed.
Supply only pump shaft spare part for pump set including motor complete for 40 HP Centrifugal pump complete all as specified and directed.
Supply only neck ring part for pump set including motor complete for 40 HP Centrifugal pump complete all as specified and directed.
Supply only shaft sleeve spare part for pump set including motor complete for 40 HP Centrifugal pump complete all as specified and directed.
Supply only bearings as per sample spare part for pump set including motor complete for 40 HP Centrifugal pump complete all as specified and directed.
Supply & fix in repair rubber coupling of any size suitable for 16 to 40HP Centrifugal pumping set complete all as specified and directed.
Supply only impeller CI, spare part for pump set including motor complete for 30 HP Centrifugal pump complete all as specified and directed.
Supply only pump shaft spare part for pump set including motor complete for 30 HP Centrifugal pump complete all as specified and directed.
Supply only neck ring part for pump set including motor complete for 30 HP Centrifugal pump complete all as specified and directed.
Supply only shaft sleeve spare part for pump set including motor complete for 30 HP Centrifugal pump complete all as specified and directed.
Supply only bearings as per sample spare part for pump set including motor complete for 30 HP Centrifugal pump complete all as specified and directed.
Supply only impeller CI, spare part for pump set including motor complete for 20 HP Centrifugal pump complete all as specified and directed.
Supply only pump shaft spare part for pump set including motor complete for 20 HP Centrifugal pump complete all as specified and directed.
Supply only neck ring part for pump set including motor complete for 20 HP Centrifugal pump complete all as specified and directed.
Supply only shaft sleeve spare part for pump set including motor complete for 20 HP Centrifugal pump complete all as specified and directed.
Supply only bearings as per sample spare part for pump set including motor complete for 20 HP Centrifugal pump complete all as specified and directed.
Supply only impeller CI, spare part for pump set including motor complete for 16 HP Centrifugal pump complete all as specified and directed.
Supply only pump shaft spare part for pump set including motor complete for 16 HP Centrifugal pump complete all as specified and directed.
Supply only neck ring part for pump set including motor complete for 16 HP Centrifugal pump complete all as specified and directed.
Supply only shaft sleeve spare part for pump set including motor complete for 16 HP Centrifugal pump complete all as specified and directed.
Supply only bearings as per sample spare part for pump set including motor complete for 16 HP Centrifugal pump complete all as specified and directed.
Material & labour for rewinding of 1HP&2HP electric motor/pressure motor with fine enameled bared copper wire of same gauge weight and turn along with insulating materials such as impregnated paper, cotton tap, varnish etc and keeping the rewinding in to the hot air oven till moisture evaporates and achieving proper insulation results and reassemble the motor including taking out old rewinding complete all as specified and directed for the following capacity. Note- Components/Parts shall be measured and paid separately.
Supply only MS Impeller spares parts suitable for 1HP & 2HP motror/pressure motor pump set complete all as specified and directed.
Supply only neck ring for 1HP & 2HP motror/pressure motor pump set complete all as specified and directed.
Supply only pump shaft for 1HP & 2HP motror/pressure motor pump set complete all as specified and directed.
Supply only shaft sleeve for 1HP & 2HP motror/pressure motor pump set complete all as specified and directed.
Supply only Shaft stainless steel for 1HP & 2HP motror/pressure motor pump set complete all as specified and directed.
Supply only Bearings for 1HP & 2HP motror/pressure motor pump set complete all as specified and directed.
Material & labour for attending complaint any type pump/motor/LT panels/DGs/Starters complaint at pump houses and boosters and rectify the same, rates are also included for replcement of thimbles any type and any size with nut-bolts and cable jointing with insulating tape, gland packing, greasing in pumps/valves with all connected items complete all as specified and directed. Note: Complaint should be rectify within 06 Hrs otherwise a penalty of Rs. 250/- per day will be imposed.
Supply and fixing 415V 10KA 'B' curve MCCB TPN of 40/100 Amp poles and current carrying capacity in the DB complete with connection testing and commissioning completed all as specified and directed.
Supply and fixing in replacement 0-50 Amp ammeter 3 phase Class 0.5 complete all as specified and directed.
Supply and fixing in replacement 0-500 Volts 3 phase Voltmeter Class 0.5 complete all as specified and directed.
Material and labour in replacement of worn out / defective single phase preventor suitable upto 50 HP star- delta starter 415 V, 50 Hz,complete all as specified and directed.
Material and labour in replacement of timer pneumatic type suitable upto 40/50 HP star- delta starter 415 V, 50 Hz, complete all as specified and directed. Make : BCH, ABB or as per existing.
Taking down old UNSV feeder piller box from the site and make good to disturbed surfaces complete all as specified and directed.
Fabrication of Sheet metal enclosure, feeder box size (0.70X0.70X0.25 cm) having thickness of 3.15mm and inner shell made out of 2mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction including necesary items confirming to IS:8623/93 (i) MCCB FP 250 Amp 36 KA (incomer) (ii) MCCB FP 160 Amp 35 KA (outgoing) (iii) MCCB FP 160 Amp 35 KA (outgoing) (iv) Aluminium bus bar 400 Amp with cloured heat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted on DMC/epoxy insulator (not less than 50mmx50mm conicle type at a maximum interval of 500 mm.
Supply and fixing in repair of rusted & crack CI/DI water branch connection 150 to 300mm dia by using mechanical joint with connecting all accessories complete all as specified and directed. Note : (i) Cost of gasket and nut bolts ,washers'jointing of materials as required are inclusive in above job. (ii) Required T&P for job provided by the Contractor is inclusive in the item rate quoted by contractor. (iii) Excavation for pipe is included in job Work.
Disconnection and removing the broken S/S spindle with checknut and S&F brass spindle of same size and length along with checknut suitable for sluice valve 150 mm bore PN 1.6/PN1 of exisisting makes including threading machining and Lathe work complete along with fixing material such as gland packing nut and bolts complete all as specified and directed.
All as per item No 43 here in before but 100 mm bore.
Supply and laying Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for 150 mm bore size with Spigot & Socket end, Class K-9 conforming to IS: 8329/2000 and suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining as per IS: 455:1989 and external Metallic Zinc Coating as per annex A of IS 8329 with finishing layer of Bitumen coating as per Annex C of IS: 8329 including taking down existing complete all as specified and directed.
All as per Item Sl No. 47 here in before but of size 100 mm bore
Supply and fixing cast iron fitting or ductile iron for spigot and socket /fanged pipe such as bends (any type radius and angle) tapers any type ( straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch , cross collers , caps and plugs upto 300 mm bore complete all as specified and directed.
Supply, laying and testing of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes 150 mm bore size with Flanged end, Class K-9 conforming to IS: 8329/2000 and suitable for rubber gasket jointing incl nuts bolts with centrifugally applied inside cement mortar lining as per IS: 455:1989 and external Metallic Zinc Coating as per annex A of IS 8329 with finishing layer of Bitumen coating as per Annex C of IS: 8329 including taking down existing complete all as specified and directed.
All as per Item Sl No. 48 here in before but of size 100 mm bore
Supply and fix in replacement Cast iron sluice valve 150 mm dia, flanged ends, stem (spindle) of SS (forged) and check nut of gun Metal, PN 1.6, working parts conforming to IS :14846, and flanged ends having drilling as per IS:1538 including taking down old unserviceable sluice valve complete all as specified and directed.
All as per item 50 here in before but 100 mm bore
Supply and fix cast iron Non return valve 150mm nominal bore ISI marked conforming to IS-5312 including rubber/fiber board gasket, nuts, washers etc including taking down old unserviceable Non return valve (flanged) reflux complete all as specified and directed.
All as per item 52 here in before but 100 mm bore
Demolition of Cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or under the over head tank/road cutting etc complete all as specified and directed.
Material and labour for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour for 50mm thick, PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/PCC path, and paving, finished the surface even and smooth without using extra cement, joint filled with bitumen and sand mixture applied hot (area not exceeding 1.20 sqm ) , complete all as specified and directed.
Supply and fix in replacement Cast Iron water butterfly valve 80/100 mm dia flanged manual type and nut bolts and necessay parts, including taking down old unserviceable cast iron water butter fly valve complete all as specified and directed.
Material and labour for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in path,paving etc finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including demolition of existing complete all as specified and directed.
Supply and fix in replacement Foot valve with flanged ends with nut-bolts and rubber gasket suitable for pipe of size 100 mm including taking out the unserviceable foot valve from the pipe complete all as specified and directed.
Material and labour for brick masonary valve pit of size 1200 x 1200 x 1200mm dimensions, one brick thick valve pit of following internal dimension with 1.6 mm thick MS sheet cover, with 35x35x6 mm stiffner welded diagonally on angle iron frame cover of size 50 x 50 x 6 mm including provn of suitable hold fasts to hold the frame and locking arrangements incl two coats of first grade synthetic enamel paint over a coat of red oxide primer on surfaces, earth work and PCC in foundation (1:3:6) Type C2 using 40mm graded stone aggregete 150 mm thick, PCC in coping on top (1:2:4),Type B1 using 20mm graded stone agregate 100mm thick including rendering 15mm thick and two coat of white wash on exposed surfaces on external wall above ground level incl demolition of old unserviceable existing one complete all as specified and directed.
All as per item No. 63 above but of size 900 x 900 x 900 mm.
Material and labour for scraping the existing paint by using wire brushes and sand paper etc and preparing the external surface and applying two coats of cement base paint on UG sump complete all as specified and directed.
Preparation of old surfaces of CI/DI/GI pipe 100 to 20 mm bore by removing old paint and applying two coats of synthetic enamel paint on all external surfaces of CI/DI pipe for rising supply, overflow and washout 100mm bore vertical length including necessary scaffolding and other arrangement required for painting complete all as specified and directed.
Cutting/removing of bushes/small trees/vegetation growth upto a distance of appx 50 mtr around the UG sump,OHT,Pump house not exc 30cms deep incl drains all around the plant incl rough surface leveling/cutting,filling upto 12" height/ depth all around the plant and burning at a distance of 50mtr (minimum) in the presence of Engr-in-charge including sprinkling the round up chemicals for drying/killing the bushes,shrubs etc.
Disconnecting of electric supply from star delta starter of defective submersible pumping set and taking out pump set of capacity 50/40 HP with motor from bore well with the help of chain pully including column pipe,submersible cable and other accessories etc and relowering and commissioning and testing the same after repairing of submersible pump set straighting ring, jointing, welding, turning and polishing to pump shaft any size CI/GM impeller CI bowl, making key with key way & other replacement of worn out parts with new on laths & other any type of machine work is reqd at site including replacement of 5/8" nuts & bolts rubber gasket of column pipe fixing of spares and reassembling pump set after repair connecting & testing complete all as specified and directed. Note :- (i) Spare parts will be measured and paid separately as supply only here-in-after. (ii) Transportation of pump sets from site to workshops and vice versa shall be deemed to be included in the unit quoted rate. (iii) T & P required at site will be arranged by the contractor.
Rewinding of submersible motor of 50 HP capacity with super enameled insulated copper wire as per existing gauge with other winding material including cleaning of stator, slots replacement of defective components and parts complete all as specified and directed. Note- Components/Parts shall be measured and paid separately.
All as per item . 69 above but 40 HP capacity complete all as specified and directed.
Supply only Gun metal impeller with key and distance bushes for 40/50 HP Cap motor/submersible pump.
All as per item No. 71 here in before but Pump shaft of stainless steel for 40/50 HP Capacity
All as per item No. 71 here in before but Motor bush of gun metal upper & lower for 40/50 HP
All as per item No. 71 here in before but Rotar bearing stainless steel sleeve upper & lower for 40/50 HP Cap
All as per item No. 71 here in before but Coupling arrangement with key for motor pump 40/50 HP Cap
All as per item No. 71 here in before but Thrust bearing assembly for submersible pump set motor cap 40/50 HP.
All as per item No. 71 here in before but Lower, housing for submersible pump set for the capacity of 40/ 50 HP motor.
All as per item No. 71 here in before but Neck ring for submersible pump set of 40/50 HP capacity motor.
All as per item No. 71 here in before but Bowl bush of gun metal 40/50 HP Cap motor
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc.for fixing of new fencing post complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m in any type of soil, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed.
Material and Labour for PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded crushed stone aggregate.
Supply and Fixing MS Hand rails, half round or other stock section or core wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 including dismantling of existing complete all as specified and directed.
Material and labour for two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and directed.
Supply & Fixing chain link MS galvanisd fencing, including line wires, any mesh, size and type of standards, rails, straining bolts, etc. including provission of binding wire and dismantling of existing chain link fencing complete all as specified and directed.
Supply and Fixing of mild steel bars for straightening / ties bars for chain link fencing 10mm dia of over, cut to length and tying with MS wire n. exc. 0.6mm.
Supply and Fixing of MS screw bolts 5 to 10mm dia (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal/square nuts and 5 to 10 CM long complete all as specified and directed.
Material and labour for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc including dismantling of existing barbed wire fencing complete all as specified and directed. (Each line to be measured separately).
Supply and Fixing in replacement DOL starter 415 volt 3 phase suitable for 05/7.5 HP motor complete all as specified and directed.
Supply and Fixing in replacement on load change over of 160 A,415 V 3Phase and neutral with enclosure complete all as specified and directed.
Material and labour for machine cut kota stone slab 20-25 mm thick (of size not less than (55 cm x 55 cm) laid in floor, jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting waste, rubbing and polishing (Granite finish) over and including cement screed bed 15mm thick in cement mortar (1:4) base and demolition of existing kota stone complete all as specified and directed.
Material and labour for machine cut kota stone slab 14-16 mm thick laid on verticle surface, jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as in skirting over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surfaces and demolition of existing kota stone complete all as specified and directed.
Material and Labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, including taking down existing plaster complete all as specified and directed. Note: WPC shall be measured and paid separately.
Material and Labour for 5 mm thick rough cast plaster over and including 10mm thick base rendering in cement mortar (1:4) mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, including taking down existing plaster complete all as specified and directed. (Note : WPC shall be measured and paid separately).
Material and Labour for preparation of new wall surfaces and applying two coats of cement base paint over a one coat of cement primer complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
Material and Labour for PCC in sub base, foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded crushed stone aggregate complete all as specified and directed.
Material and Labour for rendering 10 mm thick in CM 1:3 as in ceiling finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement including taking down existing plaster complete all as specified and directed.
Demolition concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete all as specified and directed.
Material and labour for replacement of MCCB FP 400Amp, 36KA breaking capacity, 415 V adjustable type complete all as specified and directed.
Material and labour for replacement of MCCB TPN 250Amp, 36KA breaking capacity, 415 V adjustable type complete all as specified and directed.
Material and labour for replacement of MCCB 200Amp, TPN pole,36 KA breaking capacity adjustable thermal and adjustable magnetic setting including suitable thimble nut bolt and washers complete all as specified and directed.
Material and labour for replacement of MCCB TPN 160, 36KA breaking capacity, 415 V adjustable type complete all as specified and directed.
Material and labour for replacement of MCCB TPN 125Amp, 16KA breaking capacity, 415 V adjustable type complete all as specified and directed.
Material and labour for replacement of MCCB TPN 25 to 100Amp, 16KA breaking capacity, 415 V adjustable type complete all as specified and directed.
Material and labour for repairing to existing CI/DI/GI pipe line, leakage by caulking of lead joint or any other means like fixing a clamp with rubber sheet at the place of leaking joints in running water pipe line including necessary material complete all as specified and directed for 300/200mm/150mm/100mm/80mm bore CI/DI pipe and fitting such as clamps or any other fittings if required will be provided by the contractor and its cost is included in the quoted item rate.
Supply, fixing & testing on wall or laid under floor GI pipe 25mm medium grade ISI marked with all fittings including taking down existing complete all as specified and directed.
All as per srl item No. 108 here in before but of 20 mm bore.
Supply, laying & testing GI pipe 80 mm bore medium grade ISI marked with all fittings laid in trenches including taking down existing complete all as specified and directed.
All as per srl item No. 110 here in before but of 50 mm bore.
All as per srl item No. 110 here in before but of 40 mm bore.
All as per srl item No. 110 here in before but of 25 mm bore.
All as per srl item No. 110 here in before but of 20 mm bore.
Supply and fixing in replacement of gun metal gate valve ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe of size 50mm bore including fixing nipple, union or fitting as per site requirement complete all as specified and directed.
All as per item 115 here in before but 40mm bore
All as per item 115 here in before but 25mm bore
All as per item 115 here in before but 20mm bore
Excavation in trenches not exc 1.50 metre wide not exc 1.50 metre deep in soft/ loose soil for laying of pipe line and getting out complete all as specified and directed.
Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of excavated soil surplus to the requirement to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.
Material and labour for sand cushioning with clean dry sand to cables with layer of sand 8 cm before laying of cable and 15 cm thick after laying of cable complete all as specified and directed. Note : For payment purpose punned thickness of 18 cm shall be measured against spread thickness of 23 cm as mentioned in para 19.75 of SSR part-I.
Material and labour for providing PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other complete all as specified and directed.
Supply, laying & testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 120 Sqmm 3.5 Core laid in any position including taking out existing complete all as specified and directed.
All as per item 124 here in before but 70 Sqmm.
All as per item 124 here in before but 50 Sqmm.
Supply & fixing in replacement PVC submersible copper cable flat of size 25 Sqmm 3 Core including tieing with column pipe with nylon rope complete all as specified and directed.
All as per item No. 127 above but copper cable size 16 Sqmm.
Supply and fix in replacement , commissioning and testing of electromagnetic flow meter of dia 150mm provided with flanged end complete with all necessary fittings, complete all as specified and directed.
Supply and fix in replacement, commissioning and testing of electromagnetic flow meter of dia 100mm provided with flanged end complete with all necessary fittings complete all as specified and directed.
Material and labour for fabrication of the water level indicator frame made out of MS sheet 2 mm thick of size 1'x12' and hollow ms bar/angle iron 50x50x6 mm including all fixing arrangement incl painting two coat of synthetic enamelled paint over a coat of red oxide primer incl level marking and fixing and taking down existing complete all as specified and directed.
Note:- Amount of credit of Rs. 292245.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in PDF form which will be deducted offline while acceptance of tender.
KULWANT SINGH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .