Construction of mahatma gandhinagar gruh after demolition existing nagaragruh (Third Trail)

Name of work :- REDEVELOPMENT OF GANDHINAGAR GRUH AT VADODARA MUNICIPAL CORPORATION VADODARA.

SCHEDUAL B SHEET

SR. NO. DESCRIPTION TOTAL QTY UNIT RATE. AMOUNT

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable

1 materilas and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing. 480.5 Sqmt. 48.91 ₹

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all

2 lead and lift. (i) R.C.C. work 661.5 Cum 1084.3 ₹

Dismentling wood work, wrought framed and fixed in frames trusses including stacking the materials

3 with all lead and lift. 90.18 Sqmt. 1803.36 ₹

Demolition of Brick work and stone masonry including stacking of

4 serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) In Lime Mortar 1559.25 Cum 375.02 ₹

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within

5 all lead and lift.(i) Not exceeding 3 Sq.M. in area 126 Each 192.41 ₹

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with

fittings and clamps including stacking the materials with all lead and

6 lift ( for any dia, of pipe) 165 Rmt 76.64 ₹

Dismantling santtary fittings like wash basin . W.C. pan Indian and

European type, flushing tank etc. including stacking the materials with

7 all lead and lift 48 Each 415.79 ₹

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing off the excavated

8 stuff upto 50 Meter lead.(A) Loose or soft soil 2758.11 Cum 120.01 ₹

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

9 excavated stuff upto 50 Meter lead.(A) Loose or soft soil 2337.81 Cum 133.05 ₹

Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing off the

10 excavated stuff upto 50 Meter lead.(A) Loose or soft soil 3117.07 Cum 146.09 ₹

Extra for additional depth more than 5.0 m for excavation for foundation including sorting out and

11 stacking of useful materials and disposing of the excavated stuff upto 50 m lead.(A) Loose or soft soil 779.27 Cum 21.64 ₹

12 Disposing off the remaining excavated stuff of above items for lead of (E) 3.00 k.m. to 5.00 k.m. 8751.5 Cum 9.35 ₹

13 Disposing off the remaining excavated stuff of above items for lead of (E) 5.00 k.m. to 10.00 k.m. 8751.5 Cum 9.35 ₹

14 Disposing off the remaining excavated stuff of above items for lead of (E) 10.00 k.m. to 15.00 k.m. 8751.5 Cum 8.28 ₹

Providing and filling rubbles including hand packing and filling interstices with quarry spalls behind

15 abutments and between returns as directed. 311.71 Cum 1086.5 ₹

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- Graded brick bat aggregate

16 40mm normal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth 342.51 Cum 3060.65 ₹

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying and the cost of centering shuttering finishing

excluding reinforcement including cost ofadmixtures in recommended proportions as per IS: 9103 to

accelerate/retard setting of concrete, improve workability without impairingstrength and durability as

per direction of the Engineer - in - charge.Without Fly Ash (Min cement level as per latest IS 456 shall

17 bemaintained) (Cement level 450 kg ) (A) Foundations. 1718.48 Cum 4896.32 ₹

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying and the cost of centering shuttering finishing

excluding reinforcement including cost ofadmixtures in recommended proportions as per IS: 9103 to

accelerate/retard setting of concrete, improve workability without impairingstrength and durability as

per direction of the Engineer - in - charge.Without Fly Ash (Min cement level as per latest IS 456 shall

18 bemaintained) (Cement level 450 kg) D) Column upto floor two level. 642.11 Cum 4896.32 ₹

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying and the cost of centering shuttering finishing

excluding reinforcement including cost ofadmixtures in recommended proportions as per IS: 9103 to

accelerate/retard setting of concrete, improve workability without impairingstrength and durability as

per direction of the Engineer - in - charge.Without Fly Ash (Min cement level as per latest IS 456 shall

19 bemaintained) (Cement level 450 kg) C) Ground Beam / Plinth Beam upto floor two level. 293.24 Cum 4896.32 ₹

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying and the cost of centering shuttering finishing

excluding reinforcement including cost ofadmixtures in recommended proportions as per IS: 9103 to

accelerate/retard setting of concrete, improve workability without impairingstrength and durability as

per direction of the Engineer - in - charge.Without Fly Ash (Min cement level as per latest IS 456 shall

20 bemaintained) (Cement level 450 kg) C.) Beam upto floor two level. 691.2788 Cum 4896.32 ₹

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying and the cost of centering shuttering finishing

excluding reinforcement including cost ofadmixtures in recommended proportions as per IS: 9103 to

accelerate/retard setting of concrete, improve workability without impairingstrength and durability as

per direction of the Engineer - in - charge.Without Fly Ash (Min cement level as per latest IS 456 shall

21 bemaintained) (Cement level 450 kg) C) Grid Slab upto floor two level. 461.74 Cum 4896.32 ₹

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying and the cost of centering shuttering finishing

excluding reinforcement including cost ofadmixtures in recommended proportions as per IS: 9103 to

accelerate/retard setting of concrete, improve workability without impairingstrength and durability as

per direction of the Engineer - in - charge.Without Fly Ash (Min cement level as per latest IS 456 shall

22 bemaintained) (Cement level 450 kg) C) Slab upto floor two level. 761.9798 Cumt. 4896.32 ₹

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying and the cost of centering shuttering finishing

excluding reinforcement including cost ofadmixtures in recommended proportions as per IS: 9103 to

accelerate/retard setting of concrete, improve workability without impairingstrength and durability as

per direction of the Engineer - in - charge.Without Fly Ash (Min cement level as per latest IS 456 shall

23 bemaintained) (Cement level 450 kg) B) Walls from top of foundation level upto floor two level 283.94 Cum 4896.32 ₹

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying and the cost of centering shuttering finishing

excluding reinforcement including cost ofadmixtures in recommended proportions as per IS: 9103 to

accelerate/retard setting of concrete, improve workability without impairingstrength and durability as

per direction of the Engineer - in - charge.Without Fly Ash (Min cement level as per latest IS 456 shall

24 bemaintained) (Cement level 450 kg) E) Staircases excluding landing upto floor two level 214.5026 Cum 4896.32 ₹

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying and the cost of centering shuttering finishing

excluding reinforcement including cost ofadmixtures in recommended proportions as per IS: 9103 to

accelerate/retard setting of concrete, improve workability without impairingstrength and durability as

per direction of the Engineer - in - charge.Without Fly Ash (Min cement level as per latest IS 456 shall

25 bemaintained) (Cement level 450 kg) C.) Lintel 35.0181 Cum 4896.32 ₹

Providing formwork of ordinary timber planking so as to give a rough finish including centring shuttering

strutting and propping etc. Height of propping and centring below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A)

26 Foundations Footings Bases of Columns etc. and Mass concrete. (upto 10 ton) 520.278 SQM 179.36 ₹

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling

not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in.

27 (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan. (upto 10 ton) 3743.256 SQM 313.06 ₹

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling

not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in.

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not

28 exceeding 1 M. in Depth. (upto 10 ton) 1955.052 SQM 202.18 ₹

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling

not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in.

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not

29 exceeding 1 M. in Depth. (upto 10 ton) 4943.279 SQM 202.18 ₹

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling

not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in.

(B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto

30 mm in thickness. 302.599 SQM 260.88 ₹

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling

not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in.

(B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto

31 mm in thickness. 3971.44 SQM 260.88 ₹

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling

not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (C) Vertical surface such as walls (any thickness) partitions and the like including

32 attached buttresses & string course & the like. 2591.886 cu.m 239.69 ₹

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and

plain concrete work in. (M) Staircase with sloping or stepped soffits including risers and stringers

33 excluding landing 945.362 SQM 254.36 ₹

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling

not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in.

(H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not

34 exceeding 1 M. in Depth 311.883 SQM 202.18 ₹

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in

35 position complete upto floor two level 854298.973 Kgs 77.29 ₹

Brick work using common burnt clay building bricks having crushing strength not less than

36 kg./Sq.Cm. in foundation and plinth in CementMortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 78.94 Cum 4153.07 ₹

Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in CementMortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional +

Extra for brick work in superstructure above plinth level upto floor two

37 level (B) Conventional 448.3936 Cum 4434.92 ₹

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in foundation and plinth (B) Conventional+ Extra for brick work in

superstructure above floor two level Item No.

38 (B) Coventional 2261.539 Sqmt. 656.34 ₹

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers

39 not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 6072.93 Cum 133.65 ₹

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of

40 approved steel primer all complete as per the structural designs and directions of Engineer in charge. 70980 Kg 131.15 ₹

50mm thick PUF Insulated continuous sandwich panels(0.50 mm thick pre coated GI sheet on both side

41 of Polyurethane foam with external face being corrugated) 1014 sq.mt 1176.05 ₹

Steel work, riveted in built up sections framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A) In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

42 purlins conneted to common rafters and the like. 11.1 qvintal 5889.5 ₹

Provoding and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, including

anodised alluminium butt hinges with necessary screws. (B)

Non-decorative type and block board core anodised

43 alluminium butt hinges in flush door shutters (2) 35 mm thick. 52.25 Sqmt. 1829.74 ₹

44 Laminated sheet 1.00 mm thick SOR-23/24, M788, Pg.29 104.5 Sqm 299.58 ₹

45 Dash fastener 12.5 mm dia 50 mm long (SOR-23/24, M997, Pg.36) 120 Nos 41.09 ₹

46 Anodised Aluminum Butt hinges 100mmx63mmx3.2 mm(SOR-23/24,M048,Pg.10) 60 Nos 20.45 ₹

47 S.S. Aldrop 30 Cm long of ASIS 304 Grade (M710,Pg.27) 15 Nos 400.58 ₹

48 S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade (M713, Pg.27) 30 Nos 873.05 ₹

49 S.S. Stopper 20 Cm long of ASIS 304 (M707,Pg.27) 15 Nos 127.53 ₹

50 Door closers arrow type with spring 12 length as approved sample (30 cms) (M191,Pg.13) 15 Nos 479.33 ₹

Providing and fixing rolling shutters of approved make made

of 80 mm wide M.S. laths inter-locked together through their

entire length and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and outside

locking with push-pull operation including the cost of hood

cover and spring etc. complete.(A) Shutters having width

Providing and fixing 35 mm thick shutters for Doors, windows

and clearstory windows including blackenamelled M.S. butt

hinges with necessary screws. (A) Indian teak wood. (i) Fully

52 Panelled. 27.5 Sqmt. 3748.09 ₹

Providing and fixing glazing in fire resistant door shutters, fixed panels

& partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet

(zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed

with M4 x 38 mm SS screws at distance 75 mm from the edges and

150 mm c/c , including applying a coat of approved fire resistant primer/

powder coating of not less than 30 micron on G.I. beading, & special

ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC

2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge

with glass of required thickness having 60 minutes of fire resistance

both integrity & radiation control (EW60) and minimum 20 minutes of

insulation (EI20). The manufacturer have to give test report/certification

of fire glass and the glass should have the stamp showing the value of

E, EW & EI. The glass shall be tested in approved NABL accredited lab

or by any other accreditation body which operates in accordance with

ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and

calibration scopes shall be eligible. The maximum glazing size shall not

53 be more than 1100x2200 mm (w x h) or 2.42 sqm. 49.28 Sqmt. 40809.61 ₹

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of

SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix,

suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal

strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and

make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of

54 Engineer-in-charge (Dash fastener to be paid for separately). 75.68 RMT 1726.34 ₹

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam done in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather

proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

55 necessary screws & alluminium fixtures & fastenings & fastener sleeve. 27.72 Sqmt. 2377.76 ₹

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four

track member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x

31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size 40mm x 18mm x

1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and

56 transparent silicon sealant glass fixing to frame as per details etc complete for window. 53.46 Sqmt. 2140.33 ₹

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @ Wt.

0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as

57 details etc complete for Ventilation 13.46 Sqmt. 1175.56 ₹

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

58 floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) 6038.606 Sqmt. 171.21 ₹

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto

floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand)+ Extra over

items 58 to 71 for plastering on ceilings and sofits of stairs upto floor two level instead of plastering on

20mm thick Sandfaced cement plaster on walls consisting of 12mm thk backing coat of C.M.1:3 (1 cement

60 :3 sand) & 8mm thk finishing coat of CM(1:1)1 cement :1 sand at all levels etc complete as directed by EIC. 1617.676 Sqmt. 337.52 ₹

Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two

layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under

layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per

square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone

chipping 10 mm nominal size), in panels with groove all around as per approved pattern,

including scrubbing and washing the top layer with brushes and water to expose the stone

chippings ,complete as per specification and direction of Engineer-in-charge (payment for

61 providing grooves shall be made separately). 998.6 Sqmt. 1173.87 ₹

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary

62 fittings and connection etc. complete on terrace 50000 litr 3.95 ₹

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the surface free from mortar dropping and

63 other foreign matter and sand papered smooth. 10017.2396 Sqmt. 40.59 ₹

Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade

on wall surfaces of given an even shade, over and including a priming coat of whiting after thoroughly

brooming the surface free from mortar dropping and other foreign matter.+ Extra over item 38 for

64 distemepring with dry distemper on ceilings and slopings roofs. 2827.6516 Sqmt. 54.96 ₹

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated

wall surface to give an even shade including throughly brushing the surface free from mortar droppings

65 and other foreign matter and sand papered smooth. 5359.542 Sqmt. 80.87 ₹

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc

66 complete 2399.7 Sqmt. 117.4 ₹

Providing and fixing post and pipe railing as per detailed drawing

67 including 3 coats of painting to steel works complete 96.03 Rmt 1210.17 ₹

PROVIDING AND FIXING S.S. RAILING ( S S 304 GRADE)

INCLUDING CUTTING ON FACTORY SITE AND FIXING ON

SITE AS PER DETAILS GIVEN, GRINDING FINISHING IN

LINE LEVEL ETC COMPIETER AS PER INSTRUCTION OF

68 ENGINEER INCHARGE ( APPROVED R A ) 269.28 kg 655.49 ₹

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in

flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse

69 sand ) finishing with flush pointing in white cement. 496.8225 Sqmt. 1521.73 ₹

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry including finised with flush

70 pointing & cleaning the surface etc. complete for DARK shade 532.4682 Sqmt. 1432.78 ₹

Providing and laying Ceramic tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-coarse sand ) finishing

71 with flush pointing in white cement 69.4832 Sqmt. 983.2 ₹

Post Tensioning Work:

Design and execution of post tensioning work, including decolling, the strands, cutting to the required

lengths, supplying, laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with

couplers and inserting the strands, profiling, fixing liveend anchorages, including supply of stressing

anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including

flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement,

stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures with

required tools, plants, and machineries, and consumables etc. (Shuttering, concreting & reinforcement

steel shall be paid under respective Items) at all heights including all leads, lifts, coordination, with the

post- tensioning agency, preparation of drawings, obtaining approval from the Employer/Architect etc.

Rate to include providing water, power, cement and admixture for grouting, packing of sheathing and

anchorages blockings, filling of recess pockets after stressing using grouts (cement slurry mixed with

approved admixtures) Including providing access to post tensioning at all heights including all leads, lifts

etc., all complete and as approved and as directed by the Employer Architect but excluding shuttering,

72 concreting & reinforcement steel which shall be payable under respective items separately. 63.99855 MT 201772.75 ₹

Providing 20 mm thick double coat mala cement plaster on

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

73 with trovel including scaffolding curing etc. complete. 135.7884 Sqmt. 279.2852 ₹

PROVIDING AND FIXING COLOURED ACP FACIA

ALUMINIUM SECTION FRAME OF 24 X 35MM TUBE

FRAME AT REQUIRED SPACING FIXED ON PLASTERED

WALL OR RCC SURFACE OR FREESTANDING STRUCTURE

INCLUDING 3MM ALUBOND OR EQUIVALENT MAKE

ALUMINIUM COMPOSITE PANELS (ACP)OF APPROVED

COOUR FIXED ON THE FRAME IN TRUE LINE AND LEVEL

UPTO ANY HEIGHT FOR ANY DECORATIVE SURFACE AS

PER ARCHITECTS DRAWINGS AND INSTRUCTIONS AND

74 AS PER INSTRUCTIONS OF ENGINEER IN CHARGE (A.R.) 108.02 Sqmt. 3050.2 ₹

Providing and fixing water-repellent terracotta vertical cladding tiles on external or internal wall

surfaces, including all necessary connection and support items such as aluminium/SS sub-framing,

anchor fasteners, brackets, clamps, spacers, grooves, edge trims, and sealants, complete as per

architectural drawings and manufacturer’s specifications. The work shall include surface preparation,

alignment, leveling, application of suitable adhesive or mechanical fixing system, and proper joint

treatment using weather-proof sealant. Tiles shall be of approved make, shade, and pattern (generally

10–20 mm thick), having UV resistance, water repellency, and durability conforming to IS standards. The

rate shall be inclusive of all materials, labour, scaffolding, wastage, fixing accessories, cutting, finishing,

and cleaning of the surface, complete in all respects and as directed by the Engineer-in-Charge, using

75 approved brands 1376.45 Sqmt. 1848.1788 ₹

Designing ,Supply and Installing of Exposed Cornice - GRC / FRP having thickness of 80mm with

ornamental elements as per requirement, including designing, submitting shop drawing and two mock

ups of Stone work and getting it approved by EIC/Architet/PMC.The cost also includes hand crafting and

installation of in Group as per size. The Sculptures has to be hand crafted by expert artisans giving all

shapes, expressions, polishing and color as approved by EIC/Architect. Lifting, Placement and Fixing

76 with all required civil work, welding DG set, tools,etc at the site as per the requirements directed by EIC 641.25 Sqmt. 4814.67 ₹

Designing ,Supply and Installing of jharokha - GRC / FRP having thickness - relief from wall surface of

150mm with ornamental elements as per requirement, including designing, Submitting shop drawing and

two mock ups of Stone work and getting it approved by EIC/Architet/PMC.The cost also includes hand

crafting and installation of in Group as per size. The Sculptures has to be hand crafted by expert

artisans giving all shapes, expressions, polishing and color as approved by EIC/Architect. Lifting,

Placement and Fixing with all required civil work, welding DG set, tools,etc at the site as per requirement

77 directed by EIC 277 Sqm 6910.42 ₹

Providing and fixing of Heritage Look FRP Decorative Column - with heritage element embossed upto

80mm - Cladding of GRC/FRP on having 400 mm dia column and shape as per Architectural detailed

drawing, coated with Spar Varnish of approved make and It allows to fix on holes, as a stand alone

component in cast in site RCC pedestal with necessary respective provisions of hanging and fixing

materials. It allows for enough sturdy arrangements during fabrication and fixing. It shall be neatly

cleaned and decorative as per detailed architectural drawing and up to the level of satisfaction of

Architect / Engineer in charge. Contractor shall provide font size with approved colour as per architect

78 satisfactor 55.44 Sqm 7932.54 ₹

Providing and fixing wooden moulded corner beading of triangular shape to the junction of

panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete

2nd class teak wood.

79 9.111.1 50x50 mm (base and height) 242 Sqmt. 357.8935 ₹

Polishing with french polish on new wood and wood based

surface to give an even surface including cleaning, the

surface of all dirt, dust and sand papering smooth and

Designing,a fabricating,

coat of wood filler. installing and fixing in position Curtain

testing, 242 Sqmt 139.2487 ₹

Wall with Aluminium Composite Panel Cladding, with open grooves for

linear as well as curvilinear portions of the building , for all heights and all

levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for

pressure equalisation or rain screen principle as required, proper drainage

of water to make it watertight including checking of all the structural and

functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium

composite panel cladding in pan shape in metalic colour of approved

shades made out of 4 mm thick aluminium composite panel material

consisting of 3 mm thick FR grade mineral core sandwiched between

two Aluminium sheets (each 0.5 mm thick). The aluminium composite

panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating of approved colour and shade

on face # 1 and polymer (Service) coating on face # 2 as specified using

stainless steel screws, nuts, bolts, washers, cleats, weather silicone

81 sealant, backer rods etc. 786 Sqmt. 1280.63 ₹

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement

82 plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 86.969 Sqmt. 1022.34 ₹

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of

83 slab including rubbing and polishing etc. complete. (A) 25mm thick 52.8 Sqmt. 1001.14 ₹

Providing and laying coloured glazed tiles of the size 300 mm x

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement

84 plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. 352 Sqmt 1477.25 ₹

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back

85 washbasin 550 mm x v 400mm size. (i) In white colour. 9 Each 1418.56 ₹

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

86 measured and paid for separately)(A) vitreous China Pattern :(i) in white colour 21 Each 1336.3 ₹

PROVIDING & FIXING JAQUAR BRAND HAND SHOWER

87 (HEALTH FAUCET) SKU:ALD-CHR-573 ( APPROVED R A ) 15 Each 2166.45 ₹

Providing and fixing raised toilet seat with cover for handicap toilet (Commander or equivalent) as

88 recommended by the E-I-C 2 Each 7575 ₹

Providing and fixing brackets, tracks with flexible feed & waste pipes for adjustable type wash basin

complete as recommended, for

89 handicap toilet 2 Each 7777 ₹

90 Providing and fixing toilet paper holder.(A) C.P. Brass 15 Each 427.99 ₹

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed

concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern

91 = White colour 15 Each 973.43 ₹

Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc.

92 complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm 22 Each 1062.18 ₹

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the

93 cost of cutting and making good the walls. 16 Each 585.37 ₹

Providing and fixing Gun metal check or non-return fullway wheel

94 valve.(E) 40mm dia 15 Each 663.43 ₹

Providing and fixing Gun metal check or non-return fullway wheel

95 valve.(C) 25mm dia. 5 Each 420.63 ₹

Providing and fixing screw down bib taps of following size.(B) Brass

96 chromium plated screws down Bib Tap. (i) 15mm dia. 25 Each 186.83 ₹

Provinding and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC

97 sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washer. 10 Each 233.67 ₹

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i)

98 Square mouth traps.(B) 150mm x 100mm size P or R type 15 Each 1246.92 ₹

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks

having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside

99 dimensions 455mmx 610mm and 450mm deep for single pipe line. 10 Each 2932.93 ₹

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

100 materials. 400 Rmt 72.65 ₹

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

101 materials. 350 Rmt 91.84 ₹

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

102 materials. 250 Rmt 148.12 ₹

103 Providing and fixing in position cowel went to pipes.(C) 100mm dia 100 Each 505.17 ₹

104 Urinal partition : Granite Slab (18 mm thick) 1 side Polished (SOR : 23-24,M253, Pg.15) 90 Sqmt 1360.93 ₹

105 labour charges for edge finishing (SOR 2023-24, M726, Pg.28) 3 RMT 85.85 ₹

106 labour charges for edge finishing (SOR 2023-24, M726, Pg.28) 3 Rmt 43.43 ₹

Providing and laying chequered precast cement concrete tiles 22mm

thick with aggegate of sizes upto 6mm in floors, treads of steps and

landings on 20mm thick bed of C.M. 1:6 (1-cement : 6-sand) or L.M.

1:1.5(1-Lime putty : 1.5 coarse sand) joint with neat cement slurry with

107 pigments to match the shade of the tiles. 2392.3 Sqmt 541.21 ₹

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm

having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours

and shades in for outdoor floors such as+ footpath, court yard, multi modals location etc., laid on 20mm

thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the

joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-

108 Charge. 900 Sqmt. 2037.78 ₹

Preparing structural design of RCC Under Ground / Partially under ground / above high ground level

Reservoir of required capacity as per relevant I.S.s and constructing the same, including excavation in all

types of soil strata (including rock) including shoring strutting if required, for loose soil / to protect from

collapse due to near by traffic load, casting 100 mm thick P.C.C. leveling course in M- 10, Refilling the pit

with proper soil and disposing of the surplus stuff within a lead of 50 meters. Including cement plaster in

CM 1:3 with approved water proofing compound to inside water touching surface to container. Including

all types of labour and material charges of lowering, laying, erecting / hosting and jointing of pipe

assembly to inlet, outlet overflow, washout and bye pass arrangement as per hydraulic design. (should

109 be designed and executed as per GWSSB standards and specifications) Sump of Capacity 1,50,000 Ltr. 230000 Litres 2.86 ₹

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

110 testing of joints complete.(G) 600mm 200 Rmt 1400.92 ₹

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

111 testing of joints complete.(G) 600mm 150 Rmt 1400.92 ₹

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per

112 guidlines of IRC : SP 63-2018 etc. Complete. 500 Sqmt 704.07 ₹

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with C:M 1:3

113 (1cement:3fine sand) etc complete. 120 Rmt 394.59 ₹

Providing and fixing Brass Sprinkale of approved quality of the following nominal bore tube with fittings

114 and clamps including making goods the wall ceiling and floor (A) 15 mm 5 Nos. 757.5 ₹

Providing & fixing machine made Loop Pile Carpets of 100% polypropylene with Total Pile wt. ± 5%

gsm and Gauge 1/10".

The carpet effective pile height ± 5% 5.5 mm and Total Carpet wt. ± 5% 1600 gsm. This item to the

satisfaction of the engineer-in charge and consultant. The rate shall have inculding stair nose profile

(Radium type), Glue and all hardware, labour etc. complete as per detail drawing

115 and instruction of engineer-in charge 1159.4 Sqmt 1444.3 ₹

Auditorium chair Supplying and placing of auditorium chairs having , Centre to centre distance - 560MM,

Back Height - 950 ± 10 MM from floor, Seat Height - 475 ± 10 MM from floor.Seat Depth - 750 ± 10 MM.

Seat and Back Description : - i. Push back reclined chair. Back should recline for better comfort for the

user. ii. Auto Tip-up cushion. iii. Sliding mechanism. With metal ball and roller cage. iv. Arm-rest to

Armrest (center dist.): 22 (inches). v. PPCP-injection moulded/Thermofoamplastic. Housing for Cushion &

Backrest. vi. All sheet metal parts with powder coated vii. Arm-rest with cup-holder of PPCP injection

molded.with skin integral pad/or skin integral Armrest.

viii. Seat numbering on tip-up portion. ix. Row numbering for seats along the aisles. x. Provision for

lights on sides for seats along the aisles. The power points to be provided by the customer. Frame -

and cushion frame of ERW Tube / IS :307 1976 GRADE , Polyurethane Foams - Made out of High resilience

Main Curtain Fabric Providing & supplying including stitching decorative main curtain, horizontally up

down slider in art silk,

velvet fabric of ecoton shade and quality. The curtain shall have 100% gathering cloth complete with

bottom silk thread lace and same colour grout up to room height. The curtain shall be with vertical

sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorized operation

complete with runners, master runners, pullies, 6mm to 8 mm steel wire rope, 1.5 HP three face motor.

Air breaker contractors, micro switches for auto stop, push button remote control for forward, reverse

and stop positions. The curtain should be vertically up down with maximum gathering position. Hamming

and bottom finishing at site etc. complete as directed by E.I.C./Architect of the project. Providing & fixing

35 mm dia road for curtain control equipment with necessary M.S. flat support from ceiling with

scaffolding, leveling, necessary M.S. bracket including all accessories, material & labor complete. On

117 Stage Curtain with Jul motorised & channel fitting 264 Sqmt 3484.5 ₹

Side Wings Providing & Fixing wings(sliding partition) made out of

black/blue glazed cotton cloth{FR) with fixed of MS 50mm x 25mmx 16G mspipe welded frame work. The

pipe framework made out of 25mm x 50 mm pipe. c/c 900 x 900 fixed with overhead pivote track and

118 bottom channel etc. complete with duly painted on both framework. 30 Sqmt 3939 ₹

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions and extending them upto 15 cm

119 along the wall,clearing with water and oxalic acid etc. as directed. 392 Sqmt 765.97 ₹

Providing & Fixing in position Acoustical Doors along with 150 x 150mm teak wood frame, doors made

from 50mm Teak wood frame 600 x 600 c to c filled with synthetic wool 50mm thick and 5mm Tecsound

from both sides, 12mm waterproof ply & veneer from both sides, including 100mm heavy duty SS hinges

4no each leaf, with Door-closer (Dorma/ Geze or eq.) including cost of required CutOuts, decorative

mouldings/ finishing-items/ melamine polish & Scaffolding as per Engineer-in-charge & Acoustical

120 Design & Instructions & Complete in all aspects. 10.5 Sqmt. 5050 ₹

Providing and fixing wooden low hight platform having size 13.00x7.00x1.20 Mt Height. The dais made up

of Indian teak wood with chemical treatment wood must be seasoned and passed out from byflex

chemical treatment, wood must be passed of 10% high temprature of seasoning chamber, wood joints are

properly fill up by fevicol adhesive SH. The heavy wooden leg's are used for strength of dais. The size of

leg's 100mmx100mmx380mm height, the base support of the dais will be of size :-64mmx50mm & length

as per requirement. The top of platform using with good quality of Seasoned indian teakwood with size of

flanks minimum 250MM width & thickness of 38mm. The flanks joints with each other tongue and

grooves with fevicol adhesive SH ,where ever required. As per design and drawing along with necessary

fixtures and hardware. Inclusive cost of three coats malamine sprey Polishing, with approved brand &

quality. The quoting price should be inclusive of all types of taxes & duties, packing, forwarding, loading,

121 unloading 91 Sqmt. 6666 ₹

Anti-Termite System:Providing and laying of permanent piping technology anti-termite treatment before

flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with

inbuilt pressure compensation chip every 30 cm interval in the tube, having working pressure of

Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the

entire periphery of the building and at internal network of building at a depth of 20 to 200 mm under floor

at every 2 to 3 mtr. c/c distance (adjusted as per building layout ) & Ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and floor level, entering into a steel reinforced

grooved flexible pipe of minimum 22 mm ID leading into junction box and the loops shall terminate in

junction boxes & test every junction during injecting chemicals for termite control treatment. The anti

termite chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III) shall be injected by the pressure

pump diluted with water @

10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit approved line

122 plan for piping system and junction 91 Sqmt 63.63 ₹

123 Drilling pilot borehole of size 250/300 mm at above site by mud flush direct rotery rig. 190 Each 600.95 ₹

Supply of miscellenious bore material suitable to 200 mm dia pipes as following (A) MS Bore clamps

made from M.S. plate with 3 holes on either side with nuts & bolts of std make of size 750X75X16 mm flat

124 to 200 mm dia pipe. 1 Pair 1643.99 ₹

Supply of miscellenious bore material suitable to 200 mm dia pipes as following (B) MS Bore Plug having

100mm height made from M.S. plate with 3 holes at equal distance on circumferrence for nut-bolts type,

locking arrrangement with nuts-bolts & lock nuts of std make complete from 5 mm thick M.S. plate

suitable for 200mm dia pipe.

126 900 CFM /200 PSI capacity air compressar upto the availability of sand free discharge for upto 250 mtrs 1 NOS 27603.3 ₹

Supply of miscellenious bore material suitable to 200 mm dia pipes as following (C) MS Bail Plug having

length 0.45 mtr from medium class pipe as per I.S.S. suitable for 200 mm dia pipe.

128 160 diametre U.P.V.C (Type B) 190 MT 831.22 ₹

Supply of GRAVEL OF selected size 4 mm to 6mm

Brick work : Rain water Harvesting pit 2mtr x 2 mtr x 2.5mtr deep with 35 x 35 cm dry brick honey comb

perforated brick work

131 15mm thick cement plaster - Cement mortar 1:4 (1-cement :4-sand) 25 SQM 2747.21 ₹

RCC precast M.H. Frame & Cover (perforated) - Heavy duty

Frame suitable for 50cm opening of MH

Cover suitable for 50cm opening of MH

Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S. laths inter-locked together through their entire length and

jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and outside locking with push-pull operation including the

133 cost of hood cover and spring etc. complete. (A) Shutters having width below 3.5 M 77.5 Sqmt. 3554.4 ₹

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm braced

with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia,

steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles including applying a

134 priming coat of red lead paint. 4.5 Q 5941.61 ₹

Providing & Fixing Prefabricated Opaque Colour 3mm Thick Acrylic Sheet Cut Letters of For Sign Board

and V.M.S.S. Logo with Inside Led (Ge-USA Make With 5 Years Unconditional Warranty) Lights Fixed On

3mm ACP Sheet Boxes with Ms Angle Frame to Be Fixed on R.C.C. Beam or On Masonry with Plaster at

Any Height Including Lifting, Hoisting and Fixing with Finishing Colouring etc. Comp. Letters May Be

Gujarati or English as Per Architects detail Drawings and Instructions and As Directed by Engineer in

135 Charge.D.) V.M.S.S Logo of Appropriate Size Height Up To 90cm 3 Each 18584 ₹

Providing & Fixing Prefabricated Opaque Colour 3mm Thick Acrylic Sheet Cut Letters of For Sign Board

and V.M.S.S. Logo with Inside Led (Ge-USA Make With 5 Years Unconditional Warranty) Lights Fixed On

3mm ACP Sheet Boxes with Ms Angle Frame to Be Fixed on R.C.C. Beam or On Masonry with Plaster at

Any Height Including Lifting, Hoisting and Fixing with Finishing Colouring etc. Comp. Letters May Be

Gujarati or English as Per Architects detail Drawings and Instructions and As Directed by Engineer in

136 Charge.A.) 3D Letter Height 90cm x 10cm x Wide & Req. Depth 36 Each 13938 ₹

Providing & Fixing Prefabricated Opaque Colour 3mm Thick Acrylic Sheet Cut Letters of For Sign Board

and V.M.S.S. Logo with Inside Led (Ge-USA Make With 5 Years Unconditional Warranty) Lights Fixed On

3mm ACP Sheet Boxes with Ms Angle Frame to Be Fixed on R.C.C. Beam or On Masonry with Plaster at

Any Height Including Lifting, Hoisting and Fixing with Finishing Colouring etc. Comp. Letters May Be

Gujarati or English as Per Architects detail Drawings and Instructions and As Directed by Engineer in

137 Charge.B.) 3D Letter Height 60cm x 6cm x Wide & Req. Depth 36 Each 11034.25 ₹

Providing & Fixing Prefabricated Opaque Colour 3mm Thick Acrylic Sheet Cut Letters of For Sign Board

and V.M.S.S. Logo with Inside Led (Ge-USA Make With 5 Years Unconditional Warranty) Lights Fixed On

3mm ACP Sheet Boxes with Ms Angle Frame to Be Fixed on R.C.C. Beam or On Masonry with Plaster at

Any Height Including Lifting, Hoisting and Fixing with Finishing Colouring etc. Comp. Letters May Be

Gujarati or English as Per Architects detail Drawings and Instructions and As Directed by Engineer in

138 Charge.C.) 3D Letter Height 30cm x 4cm x Wide & Req. Depth 36 Each 7549.75 ₹

Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide

x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required

size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running

at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre

to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with

25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm

c/c, including jointing and finishing to a flush finish of tapered and square edges of the board

with recommended jointing compound , jointing tapes , finishing with jointing compound in

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board,

all as per manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding

139 the cost of painting with : 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board ₹

Fully to IS: 2095-

Perforated Gypsum(Part 3):1996Board

Plaster (Boards

size BIS certification

1200 x 2400x12.5 marks)

mm having approx. 16 %

perforated area with perforation size 12x12 mm Square Perforation Spacing : 25mm CTC and

pattern as approved by the Engineerin-charge and as per manufacturer's specification, with 250.00 Sqm. ₹

all 4 side tapered and backed by acoustical tissue with NRC value not less than

Supply and installation of Supreme Acoustics RESIMER 50mm thk, FR Grade, The material

should be 100% Recyclable & it should comply ROHS & REACH Certification, Green Building

product, with Honeycomb structure, in form of sheets & can be supplied in any customised size.

Standard size is 1200x1200x50mm thk. Being Robust in structure no mess is required to hold the

same. Make sure the surfaces must be devoid of moisture prior to installation of Supreme

Acoustics ResiMer FR .

can be then adhered to surface (Walls / Ceilings & Floors) with GI Frame or strong Adhesive or

double sided tape for holding in position , Supreme Acoustics ResiMer FR can be covered with

any facing material given (Supreme MUFFLE). • Fire (Class) – UL94 HF-1 - Premium quality Fire 2000.00 Sqm. ₹

Retardant (Self - Extinguishing flame safety standards). • Acoustics – NRC - Upto 0.90 & Mid /

High Frequencies is Up To 1.0* • Thermal (W/mk)– 0.03206 w/m-k • Climate (°C, RH) – No Change

• Light (%) – Colour Dependant • Green (VoC, RC %) – CFC Free & very has very Low VOC, •

Resistant to insect and rodent attack • Resistant to bacterial, fungi or any bio attack • Moisture-

resistant – No mositure content, can be stable.• REACH Compliance. (Registration, Evaluation,

Authorization & Restriction Of Chemicals), • ROHS Certified. (Restriction Of Hazardous

Substance), fixed to wall with screw, rawel plug & washers and held in position by criss

crossing GI wire etc. complete as per directions of Engineer-in-Charge.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of

approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%,

Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per

(BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all

round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T

runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size

600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm)

mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up 350.00 Sqm. ₹

to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to

centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI

perimeter wallessure pump diluted with water @

10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit

approved line plan for piping system and junctions to post tensioning at all heights including all

leads, lifts etc., all complete and as approved and as directed by the Employer Architect but

excluding shuttering, concreting & reinforcement steel which shall be payable under respective

items separately.HDMI active/optical, Cat6A F/UTP, OM4 fiber as applicable; FR-LSZH power

with tegular edge and 15 mm thickness, visible surface of each tile is 7 mm below the grid,

visible surface is a batch painted glass tissue in white, back of the tile covered with glass tissue.

NRC - 0.8 NRC as per ASTM C 423. Base material : Glass Fiber Humidity Resistance -Class C, 300.00 Sqm. ₹

relative humidity 95% and 30°C, according to EN 13964:2014

Providing and installation of 100% polyester knit fabric (PVC free) meeting CE Certification

standards according to EN 14716, and fire rated to Class A/Class I per ASTM e84 and Bs1d0 as

per DIN EN 13501-1. The fabric weight must be 205 gsm, with maximum tensile strength

conforming to DIN EN ISO 13934-1 at 290.7N (length) and 1119.3N (cross). Additionally, maximum

tensile elongation should be 65.4% (length) and 34% (cross), and trouser tear propagation as

per DIN EN ISO 13937-2 should be 26.1N (length) and 13.7N (cross). Lengthwise Elasticity, as per

DIN EN 14704-1, should be 2.2%. The VOC rating should be A+. All joints must be fused or

provided with appropriate interface trims to facilitate ceiling disassembly for light access. The

ceiling installation shall utilize a proprietary supplied PVC system with a maximum width of

16mm, tailored to the ceiling's size and shape. The specified fabric, under the product code

Newmat Luminous Art, has a thickness of 0.30mm, weight of 205 gsm +/- 5%, and is available in

wessure pump diluted with water @

10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit

approved line plan for piping system and junctions to post tensioning at all heights including all

leads, lifts etc., all complete and as approved and as directed by the Employer Architect but

excluding shuttering, concreting & reinforcement steel which shall be payable under respective

items separately.HDMI active/optical, Cat6A F/UTP, OM4 fiber as applicable; FR-LSZH power

cabling, dedicated earthing, SPD at DB, MCB/ELCB, PF ≥0.95; centralized control processor with

touch panel/keypads, scenes, scheduler, monitoring/logs, TCP/IP/RS-232/RS-485/BMS

integration; 19″ AV racks with cooling, PDUs, online UPS ≥15 minutes backup for

processors/control; environmental 0–40 °C, RH 10–80% non-condensing, LED MTBF ≥100,000 h;

144 compliance: IEC 62368-1, CISPR 32/35, RoHS, IS/IEC wiring rules, UL/CE as applicable; deli ₹

Providing and fixing plywood back box for stretch ceiling made of 12MM thick MR Grade one side

1mm thick laminate with help of favicol with require accessories and hardware, depth of the 250.00 Sqm. ₹

back box is required 8" and width as per design provided b architect.

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll form

G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter

mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm

wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically

within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by

6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall

with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to

centre, and fixing of boards to both side of frame work by 25 mm long dry wall sessure pump

diluted with water @

10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit

approved line plan for piping system and junctions to post tensioning at all heights including all

leads, lifts etc., all complete and as approved and as directed by the Employer Architect but

excluding shuttering, concreting & reinforcement steel which shall be payable under respective

items separately.HDMI active/optical, Cat6A F/UTP, OM4 fiber as applicable; FR-LSZH power

cabling, dedicated earthing, SPD at DB, MCB/ELCB, PF ≥0.95; centralized control processor with

touch panel/keypads, scenes, scheduler, monitoring/logs, TCP/IP/RS-232/

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 16 %

perforated area with perforation size 12x12 mm Square Perforation Spacing : 25mm CTC and

pattern as approved by the Engineerin-charge and as per manufacturer's specification, with 371.00 Sqm. ₹

all 4 side tapered and backed by acoustical tissue with NRC value not less than

Providing and fixing 12mm thick High-Density Moisture-Resistant (HDMR) MDF board panels with

perforations as per approved design, mounted on a concealed aluminum frame system made of 25mm x

38mm x 1.5mm thick aluminum hollow sections with intermediate grid supports of 600mm x 600mm or

as per site requirement. The MDF panels shall be machine-cut with precise perforation patterns, edges

sealed, and pre-finished with primer or final finish as specified. The aluminum framework shall be

securely fixed to the wall using anchor fasteners at a spacing not exceeding 600mm center to center,

and all horizontal and vertical aluminum members shall be connected using aluminum clits or brackets

for rigid joints and alignment. The MDF panels shall be fixed with self-tapping screws, countersunk and

finished flush with the panel surface. Cavity depth shall be maintained as per architect’s design to 1000 Sqm.

accommodate any service or acoustic requirement. The rate shall include supply of all materials,

including HDMR panels (Make: Actiessure pump diluted with water @

10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit approved line

plan for piping system and junctions to post tensioning at all heights including all leads, lifts etc., all

complete and as approved and as directed by the Employer Architect but excluding shuttering,

concreting & reinforcement steel which shall be payable under respective ite

Providing and fixing floating stage flooring using natural seasoned hardwood planks of size

mm (thick) x 915 mm (length) x 125 mm (width) with tongue and groove joints, laid over a 600 x

600 mm modular grid framework fabricated from Moisture Resistant (MR) board, with grid

height designed as per site conditions. The grid shall rest on resilient rubber spacers of size

mm x 75 mm x 15 mm (3"x3"x15 mm thick), spaced to ensure vibration isolation and acoustic

decoupling from the base floor. A 12 mm thick MR plywood sheet shall be fixed over the MR

board grid with appropriate screws and adhesive. The cavity formed within the grid shall be 175 Sqm.

filled with 24 kg/m³ density, 50 mm thick mineral wool for thermal and acoustic insulation. On

top of the MR plywood, the hardwood planks shall be fixed using suitable adhesive for a floating

floor finish. The finished wooden surface shall be treated with hardwax oil-based monocoat

wood protection, including sanding, application of sealer, one protective coat of wood oil, and

final buffing for a uniform natural/matte finish. All materials used shall be dry, seasoned, and

148 approved by the Architect/Engineer-in-Charge. ₹

providing and fixing an overall 70mm thick acoustic door made of plywood, door shutter outer

layer of made 12 MM thick BWP, ISI make plywood, and shutter support frame made of 19MM

thick BWP plywood, 3MM high-density rubber stick with 6MM thick BWP plywood with the help

of acoustic silicone, infilled with 16kg by 25MM thick two layers of glass wool and periphery

70x12MM of tick wood and melamine polished, grove between laminate and teak wood to be

maintained, 100 x 100MM door frame made of 19MM thick BWP plywood with require lips and 30 Sqm.

rubber bulb beading, frame to be fitted with wall or partition by the fastener and self-tapping

screw, the final finish of laminate each side, door shutter hanged with a heavy-duty bearing 8" x

3" hinge to frame, it is included with all accessories like door lock, door handle, automatic drop

door seal etc. and door closure carrying which has a capacity minimum 150kg, as per under

149 direction by client/architect in charge with prior approval. ₹

Providing and fixing 9mm thick Acoustic PET (Polyester) sheet with CNC cutting and perforation

as per the design approved by the architect or client, to enhance both acoustic performance and

aesthetic value of the space. The PET sheets shall be fixed on wall or ceiling surfaces using

specified acoustic adhesive such as Acoustic Silent or equivalent, ensuring proper surface 106 Sqm.

preparation and full contact bonding. The rate shall include all materials, CNC

cutting/perforation, adhesive, labour, tools, and necessary equipment to complete the work in

Providing and fixing floor carpet 100% polyproplin loop pile of 5 x 500 x 500 mm with backing

structure glass rainforsed PVC using with SR adhesive, eractig, and furnising. total waight 4300 500 Sqm.

gm per sqm., pile thickness 3 mm, as per under direction by client / architect in charge with

prior approval. (UNITEX, SOLARBRITE, GREENIELD, WELSPUN)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound) content less than 50 grams/litre of approved brand and manufacture, 2000 Sqm

including applying additional coats wherever required to achieve even shade and colour: Two

153 Priming coat with ready mixed pink or grey primer on plastered surface 1000 Sqm 39.05 ₹

Providing and applying white cement-based putty of average thickness 1 mm, of approved brand

and manufacturer, over the plastered wall surface to prepare the surface even and smooth 1000 Sqm

154 complete. ₹

155 Applying wood primer of approved brand and manufacture – on new wood work 1300 Sqm 31.20 ₹

SITC of 150W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour

temperatureCRI & TLCI Values above 95COB LED source from Citizen/ Philips/ Osram/ Cree or reputed

make (LM80 to be provided) DmX 512 dimming with 3 channel controlBeam Angle of 11˚ / 25˚ / 35˚Total

Power Consumption of 160W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv &

Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100%Fuse and Internal safety protections Strobe

option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR

for DmX , Black powder coated body. RDM Control options with latest technology (RDM ID to be specified)

Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-

156 1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory. 8 Nos 40732.29 ₹

SITCof300WLEDProfileSpot19DegreeLightcompletewith,3200K CCT Colour

TemperatureCOBLEDsourcefromCitizen/Philips/Osram/Creeorreputed make (LM80 to be provided) CRI &

TLCI above 95Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish

housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient

Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture

provided with Yoke of Manual AdjustmentDmX 512 dimming with 1 or 3 Channel

modesIP20protectionhavingLux@3Mtrabove11412suitabletoilluminatethekeypresenterortalentonstage.illu

minatethe key presenter or talent on

stage.RDMControloptionswithlatesttechnology(RDMIDtobespecified)LM79 Certificates from NABL

Accredited laboratoryCertificationhavingBIScomplianttoIS10322(Part5/Sec1):2012

157 CECertificationcomplianttoEN60598-1:2015,EN61437-2-13:2014 2 Nos 128612.39 ₹

SITCof300WLEDProfileSpot14DegreeLightcompletewith,3200K CCT Colour

TemperatureCOBLEDsourcefromCitizen/Philips/Osram/Creeorreputed make (LM80 to be provided) CRI &

TLCI above 95Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish

housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient

Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture

provided with Yoke of Manual AdjustmentDmX 512 dimming with 1 or 3 Channel

modesIP20protectionhavingLux@3Mtrabove38182suitabletoilluminatethekeypresenterortalentonstage.ill

uminatethe key presenter or talent on

stage.RDMControloptionswithlatesttechnology(RDMIDtobespecified)LM79 Certificates from NABL

Accredited laboratoryCertificationhavingBIScomplianttoIS10322(Part5/Sec1):2012

158 CECertificationcomplianttoEN60598-1:2015,EN61437-2-13:2014 2 Nos 145408.69 ₹

SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp

sourceCOBLEDsourcefromCitizen/Philips/Osram/Creeorreputed make (LM80 to be provided)DmX

dimming with 8 Channel modesCRI & TLCI Value > 95 Strobe option Adjustable 1 ~ 25 times / Sec

VariableBeam Angle 30 DegreeTotal Power Consumption of 410W11.7KHz Refresh RateIn built preset’s for

effectsFuse and Internal safety protectionsActive Cooling with Low Noise Fan5 Pin XLR for DmX High

quality well designed inbuilt reflectorFlicker Free 100% for Tv & Film CamerasBlack finish housing, IP20

protection Having Strobe option and smooth dimmingilluminate Stage with uniform light intensity levels.

RDMControloptionswithlatesttechnology(RDMIDtobespecified)LM79 Certificates from NABL Accredited

laboratoryCertificationhavingBIScomplianttoIS10322(Part5/Sec1):2012 CECertificationcomplianttoEN60598-

SITCof54x3WLED3200KParLightBeamAngle25°complete with 3200K 3W Lamp source x 54 Pcs

LEDsourcefromLumiled/Seoul/Nichiaorreputedmake(LM80 to be provided) Having CRI TLCI Values above

95 Flicker Free for high FPS Smooth fade in and Fade outHigh precision steady colour No heat, DmX

dimming with 2 Channel 0 ~ 100%, Powder coated Black finish housing Rigidly built pressure die-casted

Aluminium body LED Easy view display Data DmX through 3 / 5 Pin XLR’s65dB ~ 130dB Sound sensing

capacityPower In and Out Connections Total Power Consumption of 180W Sound Active Mode Control

IP20 protection.RDMControloptionswithlatesttechnology(RDMIDtobespecified) LM79 Certificates from

NABL Accredited laboratoryCertificationhavingBIScomplianttoIS10322(Part5/Sec1):2012

160 CECertificationcomplianttoEN60598-1:2015,EN61437-2-13:2014 6 Nos 14714.69 ₹

SITC of 200W LED CCT Tuneable Fresnel Light

havingCOBLEDsourcefromCitizen/Philips/Osram/Creeorreputedmake(LM80tobeprovided)3200K~5600KC

CTtuneablecolourtemperatureHighqualityuniquelydesignedFresnel Lens CRI,TLCI and R9 value above

95LED COB Based Source , Beam Angle 10 ~ 40 degree.

NoMultipleShadows–SingleSourceilluminationTotalPowerConsumptionof210WLineardimming0~100%Adju

stmentFlickerFreeforHighFPS,PowerAC100-240V,50HzWorkingTemperature-+40°~-

30°ActiveCoolingwithLowNoiseFanDmX&RDMControloptionswithlatesttechnologyFixtureprovidedwithYok

eofManualAdjustmentManualandDMXcontrolOptionmodethrough5pin/3pinxlrBlackpowdercoatedfabricate

dhousingwithnormalyoke.DmX&RDMControloptionswithlatesttechnologyFixtureprovidedwithYokeofManu

alAdjustmentManualandDMXcontrolOptionmodethrough5pin/3pinxlrBlackpowdercoatedfabricatedhousin

gwithnormalyoke.RDMControloptionswithlatesttechnology(RDMIDtobespecified)LM79CertificatesfromNA

BLAccreditedlaboratoryCertificationhavingBIScomplianttoIS10322(Part5/Sec1):2012CECertificationcomplia

161 nttoEN60598-1:2015,EN61437-2-13:2014Brandembossedimpact on the light body for genuine product 8 Nos 117573.09 ₹

SITCof200WLEDSpotLightRGBW,BeamAngle15°/25°completewithLEDsourcefromLumiled/Seoul/Nichiaorr

eputed make (LM80 to be provided) RGBW Lamp source DmX 512 dimming with 8 Channel High Bright

Red, Green, Blue, White LED’s Source Unlimited Colour Mixing through DmX

0~100%Lineardimming,Inbuiltpresetsfordifferentcolours Strobe Mode 20 times/SecData DmX through 3 /

5 Pin XLR’s65dB ~ 130dB Sound sensing

capacityPowerInandOutConnectionsHighprecisioncolours,IP20protection Powder coated Black finish

housingHaving Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited

colour effectsRigidly built pressure die-casted Aluminium

body.RDMControloptionswithlatesttechnology(RDMIDtobespecified)CertificationhavingBIScomplianttoIS10

322(Part5/Sec1):2012CECertificationcomplianttoEN60598-1:2015,EN61437-2-

162 13:2014LM79CertificatesfromNABLAccreditedlaboratory. 18 Nos 29097.09 ₹

SITC of 175W LED Spot Light complete with LEDsourcefromLumiled/Seoul/Nichiaorreputedmake(LM80 to

be provided) Having CRI TLCI Values above 95 High precision steady colour No heat, DmX 512 dimming

with 6 Channel Beam Angle 15°/ 25° / 45°0 ~ 100% Smooth dimming, Powder coated Black finish housing

Rigidly built pressure die-casted Aluminium body LED Easy view display Flicker Free for high FPS

Smooth fade in and Fade outData DmX through 5 Pin XLR’sTotal Power Consumption of 175W Sound

Active Mode ControlIP20 protection. 65dB ~ 130dB Sound sensing capacityPower In and Out Connections

RDMControloptionswithlatesttechnology(RDMIDtobespecified)LM79 Certificates from NABL Accredited

laboratoryCertificationhavingBIScomplianttoIS10322(Part5/Sec1):2012 CECertificationcomplianttoEN60598-

SITC of 350W LED RGBALC Fresnel Light

havingCOBLEDsourcefromCitizen,Philips,Osram,Cree,orareputed make.6-in-1 motorized zoom with

2000K–12000K CCT tuning.10-40Degmanualandmotorizedzoomhavingspeciallydesigned Fresnel optics for

color mixing application. 16 DMX channels for controlling the

lights.Individualcolorwattagewithluxat2m,10deg:R55W/955Lux,G90W/2680Lux,B90W/380Lux,A150W/3230

Lux,L140 W/6270 Lux, C 85 W/935

Lux.Wavelengthofthecolors:Red:610–650nm,Green:500–550nm,Blue:435–485nmAmber:590–620nm,Lemo

n:565–570nm, Cyan: 490–520 nm.No Multiple Shadows—Single Source IlluminationStrobe / Colour fade /

Colour jump / Speed effects. Linear dimming 0 ~ 100% adjustmentPower AC100-240V, 50Hz

Activecoolingsystemwithsensor-basedtemperaturecontrolDMX & RDM Control options with the latest

technologyFixture provided with yoke of manual adjustment ManualandDMXcontroloptionmodethrough5-

pin/3-pinXLRBlackpowder-

coatedfabricatedhousingwithnormalyoke.RDMControloptionswiththelatesttechnology(RDMIDtobespecifie

d)LM79CertificatesfromNABLAccreditedlaboratorycertificationisBIScompliantwithIS10322(Part5/Sec 1):

164 2012. CECertificationcomplianttoEN60598-1:2015,EN61437-2-13:201 3 Nos 207574.19 ₹

SITC of Moving Head Beam effect light 12R Base High bright long throw beam with linear zoom range

Zoom range from o to 3.8 DegreeLamp Source: Yodn 280W 12R Arc Lamp Total Power Consumption of

450W, Electrical: AC 100-240V, 50/60Hz16 Channel DmX ControlColor System:1 color

wheel+14pcsPrism：8prism+48prism with rotation effect16 Bit Dimmer ControlGobos System: 16+1pcs

gobos.Double chip Stroboscopic (0.5 ~ 9 times /SEC),Pan Angle 540°, Tilt Angle 270°IP20 rated

165 product.Electrical: AC 100-240V, 50/60Hz 2 Nos 143792.69 ₹

SITCofAluminiumOTypeclampmadeupofhighgradealuminiumhavingthicknessnotlessthan5mmsuitableforr

oundtubesofdimensionvaryingfrom40to55mmouterdiameter,providedwithfixturemounting25mmM8boltan

166 dwingnut,minimum100KGsofsafeworkingload,40mmboltand wing nut for pipe locking. 61 Nos 1180.69 ₹

SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having

167 load bearing capacity above 200 Kgs Sleeve on the rope. Carabiner Clip 61 Nos 514.09 ₹

SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base

plateThreaded rod, Black powder coated finishAll the materials under gone through 7 tank process

withvarious chemical treatment to keep them rust freeSuitable to hold various type grid & other rigging

168 systems. 40 Nos 2816.89 ₹

Motorisedintegratedflybar/winchof10MtrlengthMotorisedLightbar,thewinchshallbeprovidedwith01Nos.of1.

5HP,1440RPM,90B5frame,3Ph.(HP):1.1(1.5),Frame:90S,EFF:75.0%,MTG:B5,AMP:2.7Y,Volt:415v,DEBRG:62052Z,

DUTY:S1,FREQ:50Hz,NDEBRG:62052Z,IP:55,AMB:50degree.ItshallhaveaWormReductionGearboxwithGMRV-

9080:1,90B5,SingleReduction7.5:1to100:1andthesizeshallbe90.Itshallhaveadriveunitbaseframetofixthegearb

oxwhichcontainsoneshaft.Thismechanismshallhavedrumplateof300mmx5mmthicknesswith6groveswher

etheGIwireropeof5mmcanbewindedupwhenthehoistmovesupanddown. 415VAC Motor with Brake for

Motor System to lift a

oadof180KgasasafeworkingloadwhichshouldbesynchronizedwithControlPanel.WIFIoperatedwirelesssmar

tworkingfunctionalityDualbarreldulypowdercoatedMadeusing40NBdualconstruction.Mattblacktexturefinis

hpainttokeepthemrustfree.Powdercoated60micronsblackmattfinishwithproperchemicaltreatmentandmyt

hology.WIFIbasedupdownlightbarmovementSpeciallydesignedcompactgearbox3phaseACmotorwithDCBra

ke1.5HP.ProvidedwithNecessarypulley,guidepulleys,GIwireropewithwindingdrum.Compactgearboxalongw

ithsuitablecapacityofmotorunit.Upperandlowerlimitcontroller,Safeworkingloadof200Kg.Cablemanagement

169 system. 3 Nos 355801.79 ₹

SITC of Fixed stage side Ladder as per the design,Size of 600mm x 2400mm, Manual movableMade out of

40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Dual ConstructionPowder coated with

Matt black TextureSingle Construction with Cross connecting pipesCross connecting Pipes at every

600mmLaddercanbemovedalongthetrackoradjustedasrequired, Spud & Trolley, Pivoted or

170 FixedSuspenders as per site conditions 4 Nos 21309.99 ₹

SITCofMotorisedintegratedFOHflybar/winchof12MtrlengthMotorisedLightbar,thewinchshallbeprovidedwith

01Nos.of1.5HP,1440RPM,90B5frame,3Ph.(HP):1.1(1.5),Frame:90S,EFF:75.0%,MTG:B5,AMP:2.7Y,Volt:415v,DEBR

G:62052Z,DUTY:S1,FREQ:50Hz,NDEBRG:62052Z,IP:55,AMB:50degree.ItshallhaveaWorm Reduction Gearbox

with GMRV-90 80:1, 90B5, Single

Reduction7.5:1to100:1andthesizeshallbe90.Itshallhaveadriveunitbaseframetofixthegearboxwhichcontainso

neshaft.Thismechanismshallhavedrumplateof300mmx5mmthicknesswith6groveswheretheGIwireropeof5

mmcanbewindedupwhenthehoistmovesupanddown.415VACMotorwithBrakeforMotorSystemtoliftaloadof1

80KgasasafeworkingloadwhichshouldbesynchronizedwithControlPanel.WIFIoperatedwirelesssmartworki

ngfunctionalityDualbarreldulypowdercoatedMadeusing40NBdualconstruction.Mattblacktexturefinishpaint

tokeepthemrustfree.Powdercoated60micronsblackmattfinishwithproperchemicaltreatmentandmythology.

WIFIbasedupdownlightbarmovementSpeciallydesignedcompactgearbox3phaseACmotorwithDCBrake1.5H

P.ProvidedwithNecessarypulley,guidepulleys,GIwireropewithwindingdrum.Compactgearboxalongwithsuit

ablecapacityofmotorunit.Upperandlowerlimitcontroller,Safeworkingloadof200Kg.Cablemanagementsyste

SITCofPowerDistributionElectricalpanelhavingaIncomerof 100A. Floor mount / rack mount / wall

mount.Miniaturecircuitbrakersofsinglepolesshallbefixedofdifferentratingsfrom6/10/16/25Aasperthelightin

gfixtures.Wiringinsidethemoduleforpower,controlprotectionandinstrumentetc.shallbedonewithuseof1100

V confirming to IS 694 and IS

8130Allweldingslaggroundedoffandweldingpitswipedsmoothwithplumbermetal.Powerpanelsshallbedesig

nedinsuchawaythattheinternalspaceissufficientforhotairmovement,andtheelectricalcomponentdoesnotatt

aintemperaturemorethan40degreeCelsius.Fabricatedpanelshall be supported with ms angles of size

withan1.8mmthicknesssheettoholdthestructure.NeutralseparationmadeusingincomerofL&TorSchneiderm

ake,Voltmeter,AmmeterdisplayforreadingvisualizationIndividualMCBcontrolfor33outgoingcircuitsRYBPha

seindicatorsinternallywiredusingIScertifiedwiresandcables.Terminalforbothincomingandoutgoingcablesh

allbesuitablefor1100voltsgrade,aluminium/copperconductorPVCinsulatedandsheathed,armouredcableand

shallbesuitableforconnections.Providedwithivoryconnectorsfortheinternalterminationsandexternaloutgoi

172 ngconnectingpointsCustombuiltasperspecificationand project requirement. 1 Nos 141762.59 ₹

SITCofHighqualitypowerjunctionbox4waymadeupofMS Sheet metal fabricated housing.Snap fit fixing /15

(1.5mm ) Total Max Rating 10A, 250V A.C20˚Cto+70˚COperatingTempMouldings:Nylon,Flammability Rating

UL94V-0 Blackpowdercoated,fibreglandsofsuitablesizefittedwith Powercon or IEC connector Box 10A.

173 ClamparrangementforfixingorRaulplugarrangementforwall / floor fixing 33 Nos 1069.59 ₹

SITCofHighqualitypowerjunctionbox2waymadeupofMS Sheet metal fabricated housing.Snap fit fixing /15

(1.5mm )Total Max Rating 10A, 250V A.C20˚C to +70˚C Operating Temp Mouldings: Nylon, Flammability

Rating UL94V-0 Blackpowdercoated,fibreglandsofsuitablesizefittedwith Powercon or IEC connector Box

174 10A. Clamp arrangement for fixing or Raul plugarrangement for wall/floor fixing 2 Nos 1301.89 ₹

SITCofHighqualityDimmingInjunctionbox1waymadeupof MS Sheet metal fabricated housing High

temperature resistant insulator materialAll metal housing offers best overall RF protection

&electromagnetic shieldingBlackpowdercoated,fibreglandsofsuitablesizefittedwith 5 Pin DmX XLR Male

175 socketClamparrangementforfixingorRaulplugarrangementforwall /floor fixing 1 Nos 1039.29 ₹

SITCofHighqualityDimmingOutjunctionbox1waymadeup of MS Sheet metal fabricated housing High

temperature resistant insulator materialAll metal housing offers best overall RF protection

&electromagnetic shieldingBlackpowdercoated,fibreglandsofsuitablesizefittedwith 5 Pin DmX XLR

176 Female socketClamparrangementforfixingorRaulplugarrangementforwall /floor fixing 12 Nos 1039.29 ₹

SITCofDmXLoopJunctionBoxhaving1No.ofDmX5PinXLRFemaleSocket&1No.DmXXLRMaleSocketfittedontoa

sheetmetalfabricatedcompactJunctionboxpowdercoatedwith matt black texture finish paint.High

temperature resistant insulator materialAll metal housing offers best overall RF protection

177 &electromagneticshielding.ClamparrangementforfixingorRaul plug arrangement for wall /floor fixing 1 Nos 2958.29 ₹

SITCofInternalEarthingSystemwithcopperbareconductorsallalongthecabletrays,metalpartsandInstallation

178 Hardwares 1 Nos 32985.59 ₹

SITCofBlackPowdercoatedcabletraysmadeoutofMSSheetfabricatedforasizeof40x150x40mm&1.6mmthickn

essundergonethrough7tankprocesswithvariouschemicaltreatmenttokeepthemrustfreewithperforationfor

179 heat dissipation provided with lid. 25 Nos 1806.89 ₹

SITCofBlackPowdercoatedcabletraysmadeoutofMSSheetfabricatedforasizeof40x75x40mm&1.6mmthickne

ssundergonethrough7tankprocesswithvariouschemicaltreatmenttokeepthemrustfreewithperforationfor

180 heat dissipation provided with lid. 75 Nos 1190.79 ₹

SITCofDmXMaleFemaleConnectors5PinhavingrubbersheathprotectionforCrossconnectingDmXwiringconn

181 ections 20 Nos 463.59 ₹

182 SITCofDmXMaleTerminationConnector5Pinsolderedwithrequired capacity of resistor for signal defaming 16 Nos 524.19 ₹

DmXTouchScreenbasedcontrollerhaving7”Multitouchscreenoption2DmXOutlets5PinXLR’s,512Channelseac

h,Opticallyisolatedoutputs,4SmoothEncodersforcontroloperationofattributes,Backlitkeys,12FaderStacks,6

00+Playbacks,350+Groupsaving,350+Presets,Userdefinedshapeeffects,Macrosavingoptions,ExternalMiditi

mecodeoptions,Internalclock,Shortcutuserinterfaces,Masterfader,BlackoutKeyunderMasterfader,Numeric

alkeypadforthelightcommandentryinbuiltembeddedwithincontroller,USBinterface,Scenesavingoptions,Sh

183 owsavesand load save features, custom built user interface library 1 Nos 278241.87 ₹

SITCofOptoisolatedRDMenabledDmXsplitterunitprovided with, 8 Isolated outputs Slow blow safety fuse

Pin XLR for output interface Dual mode to select 2 universe operationDmX Input through 5 Pin XLR

ConnectorControl Protocol RDM and DMX 512Powder coated compartment finishMounting brackets for

184 grid mount. 2 Nos 40065.69 ₹

SITCofCProfileMSHotrolledstrips3mmthickwithAddedUbendusedeithertocreatebasicsupportsCustomized

40x50mmm,Allthematerialsundergonethrough7tankprocesswithvariouschemicaltreatmenttokeepthemru

185 stfreeMakeseasiertosuspendallthestagemachineryDulypowder coated Matt black texture finish paint 230 Mtr 1210.99 ₹

SITCof33-wayPowerMarshallingBoxmadeupofMSSheet

metalfabricatedhousingblackpowdercoatedandivoryconnectorsfortheinternalterminationsandexternalout

186 goingconnecting points, fibre / brass glands of suitable size. 1 Nos 27915.39 ₹

SITCofAuxiliaryMarshallingBox,madeupofMSSheetmetalfabricatedhousingblackpowdercoatedandivoryco

187 nnectorsfortheinternalterminationsandexternaloutgoing connecting points, fibre glands of suitable size. 1 Nos 44661.19 ₹

SITCofFlatCableWireharnessrequiredtoprovidetheinputpowertothesocketsonthehoistsconnectingbetween

gridlevelcircuitboxtoonhoistcircuitboxwithbelowspecifications: FRLS Multi core Copper cable

18CoresofPowereachwith2.5Sq.mmcopperwiresinsulatedwithhighinsulatedmaterial2DmX5corecableswith

lownoiseWidthoftheflatcable120mmapprox.ClipsateachbendingofthecabletoactasretractorunitLonglife, no

188 breakage, smooth folding 4 Nos 25753.99 ₹

SITCofMotorControlPanelwithDMX&ManualselectableMotorcontrolpanel,cumremotecontrol4Wayprovidin

gpowerinputformotorsinternallyneatlywiredwithcontactorshavingindividualmotorcontrolwithrequiredPus

hbutton,Emergencytrip,RYBindicators,SupplyIndictorandnecessarymetersoperatedwirelesssmartworking

functionalityforthemotorisedlightbarsshouldbetherewithoneneutral&phaseconnectionslotsandwith2virtu

alloadterminals.Foreachmotorunitoneeachswitchunitsshouldbeinstalledinsidethecontrolpanelswhichcan

becontrolledwithourmobiles,touchpadsonlywiththeinternetconnection.Motorcontrolpaneldulypowdercoat

189 edwithashgreypainttexturefinishwithallrequiredsafety features 1 Nos 110321.29 ₹

SITCofCableConnectingCircuitBoxesfortheterminationofcablesfromElectricalpaneltothegridlevelpointmad

eoutofMSSheetmetalfabricatedhousingdulypowdercoatedwithmattblacktexturefinishpaint,fittedwithrequir

190 edchannelsandivoryconnectors,necessaryglandsetc. 4 Nos 2665.39 ₹

191 SITCofFRLSCopperunarmouredFlexiblecableIS694having3 Core each of 1.5 Sq mm size. 900 Mtr 211.09 ₹

192 SITCofFRLSCopperunarmouredFlexiblecableIS694having7 Core each of 1.5 Sq mm size. 200 Mtr 483.79 ₹

193 SITCofFRLSCopperunarmouredFlexiblecableIS694having4 Core each of 4 Sq mm size. 60 Mtr 726.19 ₹

194 SITCofFRLSCopperunarmouredFlexiblecableIS694having12 Core each of 1.5 Sq mm size. 250 Mtr 817.09 ₹

SITCof5CoreDmXCablewithSheathedhousingonthecable,welldesignedinsulation,lownoisesuitabletotrans

195 mit DmX signal. 350 Mtr 318.15 ₹

SITC Autonomous (standalone) device with granular fire-fighting agent designed to extinguish fires

without human intervention in the electrical fire objects up to 2 m3 liters, located in areas with

operating temperature range from -40 °C to +80 °C (fire classes: A, B, C, E). Use at close electrical

196 enclosure for localizedand instantaneous fire suppression 36 Rmt 25248.99 ₹

(A) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump

suitable for automatic operation and consisting of following, complete in all respects, as

required: (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (C) Suitable HP

Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on

volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with

Class-F' insulation, conforming to IS-325. (D) M.S. fabricated Common base plate, coupling,

coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly

197 plastered with anti vibration pads. 2280 lpm at 70 m Head 1 SET 372754.64 ₹

(A) Supplying, installation, testing and commissioning of electric driven pressurisation pump

suitable for automatic operation and consisting of following, complete in all respects, as required:

(Jockey Pump) (B) Horizontal type, multistage, centrifugal pump of cast iron body and bronze

impeller with stainless steel shaft, mechanical seal conforming to IS: 1520. (C) Suitable HP

squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC

supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F'

insulation, conforming to IS : 325. (D) M.S.fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and

198 with anti vibration pads. 180 lpm at 56 m Head 1 SET 82930.09 ₹

(A) Supplying, installation, testing and commissioning of diesel engine driven main fire pump

suitable for automatic operation and consisting of following, complete in all respects, as required:

(Diesel Driven Pump)

(B) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with

stainless steel shaft, mechanical seal conforming to IS 1520. (C) Suitable HP, 1500 RPM water

cooled with radiator, diesel engine conforming to relevant IS standard complete with auto

starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended

upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick

aluminium sheet cladding, residential silencer, instruments and protection as per standard specification,

stop solenoid for auto stop in the event of fault with audio indications, painted with post

office red colour etc. as required.

(D) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered and with anti vibration

199 pads. 2280 lpm at 56 m Head 1 SET 615509.15 ₹

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non

rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and

conforming to IS 780 of following sizes as required : 150mm DIA

200 Sluice Valve 4 No. 22989.62 ₹

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non

rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and

conforming to IS 780 of following sizes as required : 100mm DIA

201 Sluice Valve 2 No. 14787.41 ₹

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non

rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and

conforming to IS 780 of following sizes as required : 80mm DIA

202 Sluice Valve 2 No. 10802.96 ₹

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non

rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and

conforming to IS 780 of following sizes as required : 65mm DIA

203 Sluice Valve 2 No. 9328.36 ₹

Providing, installation, testing and commissioning of non-return valve of following sizes

204 confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150 mm 2 No. 17963.86 ₹

Providing, installation, testing and commissioning of non-return valve of following sizes

205 confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm 2 No. 11160.5 ₹

Providing, installation, testing and commissioning of non-return valve of following sizes

206 confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 40 mm 40 No. 5847.9 ₹

Supply, Installation and Testing of: Foot Valve (Ball type or Swing type) with necessary pipe fitments,

hardware and consumables. MOC:-Body: Cast Iron (With Flange Ends). Standard: ISI Marked. UOM:-

207 Price Per Each No. Size: 150 mm 2 No. 13027.99 ₹

Supply, Installation and Testing of: Foot Valve (Ball type or Swing type) with necessary pipe fitments,

hardware and consumables. MOC:-Body: Cast Iron (With Flange Ends). Standard: ISI Marked. UOM:-

208 Price Per Each No. Size: 80mm 1 No. 8078.99 ₹

Supply, installation, testing and commissioning of REFLUX VALVE (PN 1.6) with flanges, nut bolts,

gaskets complete as required.a)

Supply, installation, testing and commissioning of REFLUX VALVE

210 (PN 1.6) with flanges, nut bolts, gaskets complete as required.b) 80 mm dia. 1 No. 4090.5 ₹

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of

mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. :

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm

thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. :

Supply, Installation and Testing of: Pressure Gauge with Siphon Tube and Cock. MOC:-4” Dial-

Glycerin filled- Stainless Steel Body Pressure Gauge with GI Siphon Tube and Brass Cock. Size: Dial:

4” (100 mm) Range: 0 – 16 Bar (kg/cm2) UOM:-Price Per

Providing & fixing of pressure switch in M.S. pipe line including

214 connection etc. as required. 4 No. 1561.46 ₹

Providing, fixing, testing & commissioning of installation control valve of cast iron body,

brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm

and hydraulically driven mechanical gong bell to sound continuous alarm when the wet

riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch,

cock valve complete with

drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate,

gasket etc of follwing sizes as

215 required : 150mm dia 1 No. 48684.02 ₹

Providing, fixing, testing & commissioning of installation control valve of cast iron body,

brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm

and hydraulically driven mechanical gong bell to sound continuous alarm when the wet

riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch,

cock valve complete with

drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate,

gasket etc of follwing sizes as

216 required : 100mm dia 4 No. 45452.02 ₹

Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical

construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with

hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment

process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having

switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete

in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per

CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase,

50Hz Ac Supply with enclosure protection class IP 42 as required : INCOMING 250A, 50kA 4 Pole MCCB,

Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with

selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of

Copper Bus Bar 300A OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter

with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 125 A, 50kA TPN

MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload

protection, current sensing type single phase preventor complete with all acceessories and internal

wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.

A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload

protection, current sensing type single phase preventor complete with all acceessories and internal

wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.

DIESEL ENGINE CONTROL Control for diesel engine comprising - Automatic/Manual selctor switch &

attempts starting device, timers and relays as required, push buttons, start/stop in manual mode

Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery

charger suitbale for 12V/24 V DC with boost and trickle

selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for

automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and

commissioning of system controller to control operation of main electric fire pump, diesel pump,

Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers.

217 Sensors, annunciation window for fault indication, complete as per specification. 1 No. 248187.3 ₹

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with

air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal

wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of

approved shade as

218 required. 1 No. 18426.44 ₹

Providing, laying, testing & commissioning of 'B' class Medium duty GS pipe conforming to IS

including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the

pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of

219 synthetic enamel paint of required shade complete as required : 150 mm dia 550 Mtr. 2398.75 ₹

PProviding, laying, testing & commissioning of 'B' class Medium duty GS pipe conforming to IS

including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the

pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of

220 synthetic enamel paint of required shade complete as required : 100 mm dia 75 Mtr. 1735.18 ₹

Providing, laying, testing & commissioning of 'B' class Medium duty GS pipe conforming to IS

including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the

pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of

221 synthetic enamel paint of required shade complete as required :: 80 mm dia 200 Mtr. 1348.35 ₹

Providing, laying, testing & commissioning of 'B' class Medium duty GS pipe conforming to IS

including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the

pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of

222 synthetic enamel paint of required shade complete as required :: 65 mm 150 Mtr 1170.59 ₹

Wrapping Coating for existing Hydrant Pipe in Road crossing Supply & Providing testing &

commissiong resin bounded fibre glass insulation on existing hydrant pipe in underground at

223 road crossing etc complete as required a) 150 MM Dia 70 Mtr 2525 ₹

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra

handle at bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and

224 kept on existing stand provided or hung on wall hook. 20 Ea 214.12 ₹

Repeater panne Supplying, installation, testing & commissioning of repeater panelwih

character/ Touch screen LCD display with inbuilt reset,acknowledge and silence switches

complete as required.

Supply,Instllation,Testing and Commissioning of Addressable Exit Signage visible from 20 mtrs. with

integral battery capacity of 3 hrs and bicoloured LED status indicator. Exit signage shall be comply with

ISO 3864/ISO7010 (Including Five year free

226 maintenance with guarantee) 6 No. 12106.87 ₹

SITC of single side printed night glow (Glow in Dark) safty signage MMO certified IMO signs, printed on

PVC sticker sheet and pasted on 3.5 MM thick PVC foam sheet. Make :- Autoglo

227 Sise a) 200mm x 250mm 6 No. 525.2 ₹

Supplying and fixing of fire brigade connection of cast iron body with gun metal male

instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe

230 connection conforming to IS 904 as required : 4 way - 150 mm dia M.S. Pipe 2 No. 14113.74 ₹

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing

or on floor with necessary material in an approved manner and making the ground as per

231 original. (D) 250 mm dia 50 Mtr. 295.93 ₹

Supplying and fixing single headed hydrant valve with instantaneous Gunmetal/Stainless Steel coupling

of 63 mm dia with a cast iron wheel ISI marked conforming to -IS:5290.( Type-A) with blank Gunmetal /

232 Stainless Steel cap and chain as required :Single headed Gunmetal. 3 No. 5252 ₹

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly

bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless less

233 steel (Grade 304) 4 No. 4492.48 ₹

Supply, Installation and Testing of: Fire Hose Cabinet (Hose Box) suitable to accommodate 02 no. of

15 m long fire hoses and 01 no. of nozzle. With Lock-n-key facility. Wall Mounting Design. MOC:

Gauge MS Box with Powder Coating Standard: - As per Guidelines. UOM:-Price Per Each No. Size:-

Suitable for 02 nos.

234 of 15 m long hoses. 3 No. 4242 ₹

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size

nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe

235 coupling as required: Gun metal 4 No. 2440.16 ₹

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red,

conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water

hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal

globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser

with 25 mm dia stop gun metal valve & M.S. Pipe and socket. :

Supply, lnstallation, testing and Commissioning of ABC Dry Chemical powder Mono-

Ammonium Phosphate (MAP)-90% (stored pressure) type - 6 kg Fire Extinguisher conforming

to IS:15683, with ISI marked approved fitted with required accessories including wall

suspension brackets as per specification/drawings and as directed by Architect / Engineer

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with

necessary clamps made from 50 x 6 mm

M.S. Flat with nut & bolts grouted in wall complete.

238 [A] For 4.5 Kg Capacity 20 No. 6591.26 ₹

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal

seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of

239 following sizes as required : 150 mm dia 2 Set 9049.6 ₹

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal

seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of

240 following sizes as required : 100 mm dia 4 Set 6733.67 ₹

Supply, Installation, Testing and Commissioning of Rubber Bellow Neoprene lined single unfilled arch

241 and integral rubber flanges on both side a) 150 mm dia. 2 Set 6120.6 ₹

Supply, Installation, Testing and Commissioning of Rubber Bellow Neoprene lined single unfilled arch

and integral rubber flanges on

242 both side a) 65 mm dia. 1 Set 3206.75 ₹

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal

seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of

243 following sizes as required : 80 mm dia 4 Set 5031.82 ₹

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating

68 degree centigrade with

244 required accessories :Upright sprinkler 120 Ea 527.22 ₹

SITC of Optical Beam Detector with transmitter and receiver set. The detector shall have 5 - 100 m

range, Automatic compensation, Maximum coverage 1500m2, Automatic Signal strength

adjustment, Emitter unit can be powered directly from zone (or loop), Features a Latching or

245 Non- Latching fault relay, Full line continuity options, Approved by LPCB & VdS 4 Ea 50500 ₹

Supply, Installation, Testing and commissioning of FLEXI DROP a)

246 Sprinkler Flexi Drop 1500 MM. 90 Ea 1666.5 ₹

Supplying, installation, testing & commissioning of smoke detector with builtin LED and

247 mounting base complete with all connections etc. as required 60 No. 1164.53 ₹

FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)

Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate

of rise cum fixed tempreature (dual

thermistor) type with mounting base complete with all connection

248 etc. as required 4 No. 1081.71 ₹

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box

249 having two LED, metallic cover complete with all connections etc as required. 6 No. 278.76 ₹

Supplying, installation, testing & commissioning of manual call boxes of MS construction in

surface/recess with stainless steel chain & hammer assembly complete with glass and push

250 as required. 6 No. 478.74 ₹

Supplying, installation, testing & commissioning fire alarm sounder Each with facility to make

announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier

251 i/c line matching transformer etc. complete as required. 2 No. 495.91 ₹

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath

252 complete as required. 750 Mtr 174.73 ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of

253 following size of cable. (D) 3 core 10 Sq. mm 110 Mtr 499.95 ₹

Supply,Instllation,Testing and Commissioning of Addressable Exit Signage visible from 20 mtrs. with

integral battery capacity of 3 hrs and bicoloured LED status indicator. Exit signage shall be comply with

ISO 3864/ISO7010 (Including Five year free maintenance

254 with guarantee) 3 No. 9927.29 ₹

Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG

MS sheet to accommodate the following items duly powder coated in approved colour with louvers for

ventilation, locking arrangement, audio and visual indication for fire alarm and public address system,

monitoring system including connections, interconnections etc complete as reauired.

6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC

supply conforming to IEC-268-3 complete with all accessories as required- 2 Nos. (one to act as

standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24

V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for

Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively

and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over

switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector

ON/OFF switch, fuse visual indications etc. complete as required- 1 No.Gooseneck microphone with

stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters &

ammeters terminal blocks etc. complete as required - 1 set. Battery charger trickle cum boost to take

complete load of fire alarm & PA system complete with all accessories including providing & fixing of

255 nos. 12 volt, 30 AH each sealed maintenance free batteries -1 set. (MAIN FIRE ALARM PANEL) 1 No. 49205.18 ₹

Hooter Cum Sounder Supply, Installation of: Hooter Cum Sounder size:- Range suitable for

System Design Pressure. UOM:

256 Price Per Unit MAKE : DANFOSS 1 Each 1363.5 ₹

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. cat

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection with primary light with accessories erected on

Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

258 (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. 300 nos 167.66 ₹

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected with 6A Modular

type switch and hum free EME four or more step type electronic fan regulator with separately mounted

and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid

259 PVC pipe and accessories erected concealed in wall/ceiling complete. cat III. 50 nos 674.68 ₹

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both

are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of

pipe with 6A Modular type switches and following type of accessories erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured / metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector

as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

260 complete. cat III. 40 nos 603.98 ₹

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate

261 modules erected on / in wall / ceiling with following type accessories. cat III. 250 nos 257.55 ₹

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire.(f) with medium class Rigid PVC pipe and

262 accessories erected concealed in wall/ceiling complete. cat III. 200 nos 510.05 ₹

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories. [II] For 16A Plug with

2-2.5 sq.mm Cu. Wire. (f) with medium class Rigid PVC pipe and accessories erected concealed in

263 wall/ceiling complete. cat III. 100 nos 745.38 ₹

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories. [III] For 16A Plug and

16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.. (f)

264 with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. cat III. 60 nos 871.63 ₹

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic concealed/open box with single mounting base frame

covered with textured/metallic /white front plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

265 3 nos. 6A 5 pin Plug . For Modular Type Accessories. Cat III. 50 nos 1133.22 ₹

SITC of Face Plate - Single (Keystone Jack,square) (Including Five year free maintenance with

266 guarantee). 60 nos 90.9 ₹

267 SITC of Jack Cat 6 Keystone UTP (Including Five year free maintenance with guarantee) 60 nos 161.6 ₹

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction. [C] CAT

268 - 6. for LAN points. 1300 mtrs. 47.47 ₹

269 Providing & Erecting 6 core fibre optic SM 9/125um double sheath, CSTA, Unitube, Outdoor cable (per m). 450 mtrs. 60.6 ₹

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed. (d) 1.50 Sq.mm 2 core round PVC sheathed. - speaker

270 wiring. 2500 mtrs. 31.31 ₹

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary connections. [A] Conductor Size 0.5 mm . (b) Armoured [Jelly

271 Filled]. (1) Ten Pairs. 350 mtrs. 125.24 ₹

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary connections. [A] Conductor Size 0.5 mm . (a) Unarmoured. (2)

272 Two Pairs. 600 mtrs. 20.2 ₹

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with

necessary connections as per site situation directed by Engineer In charge. (3) Two Pin/RJ-11 Telephone

273 Socket. [B] For Two Gang. Cat III. 20 nos 210.08 ₹

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed.

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-

277 nuts etc. complete of following sizes. (1) 20 mm. 600 mtrs. 17.17 ₹

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-

278 nuts etc. complete of following sizes. (2) 25 mm. 500 mtrs. 21.21 ₹

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-

279 nuts etc. complete of following sizes. (3) 32 mm. 400 mtrs. 27.27 ₹

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size (a) with medium class

280 Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm. 1800 mtrs. 62.62 ₹

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size (a) with medium class

281 Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm. 1800 mtrs. 82.82 ₹

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe

282 and accessories (a) 2 wire 4 sq. mm. 2100 mtrs. 112.11 ₹

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe

283 and accessories (b) 2 wire 6 sq. mm. 500 mtrs. 147.46 ₹

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe

284 and accessories. (h) 4 wire 6 sq. mm. (Main Panel to LDB , PDB.) 450 mtrs. 260.58 ₹

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with

Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper winding, Power

factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v

(tolerance as per IS : 374-2019), THD < 10%, compitible with electronic regulator unit for Speed Control

and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C

(Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be approved

285 by Engineer in Charge] (A) 1200 mm Sweep (48") 50 nos. 2629.03 ₹

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted

286 for fan complete with proper insulation without leckage and earthing. 50 mtrs. 108.07 ₹

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length

each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

287 Ceiling with necessary finishing. 40 nos. 108.07 ₹

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty having following dia size and maximum speed in

[E] 450 mm dia 1400 RPM.

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body

289 with inbuilt lowers & square frame. 200mm with 1350RPM Cat.II. 30 nos. 1703.87 ₹

290 Decorative call bell Ting-tong box type 250 volts complete erected. 8 nos. 71.71 ₹

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing box having following capacity. - use for AC control.

291 (A) 6 to 32 Amp. cat III. 50 nos. 299.97 ₹

Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. - use for AC

292 control. 60 nos. 176.75 ₹

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having following capacity - use for 3 phase machines.

293 (a) 6 to 32 Amp. cat III. 30 nos. 595.9 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal single phase outgoing (b) sheet steel double door

294 (IP-43) (i)4 way . - use for 3 phase machines. 40 nos. 629.23 ₹

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking

295 capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark 350 nos. 270.68 ₹

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing box having following capacity

296 (A) 6 to 32 Amp. cat III. 80 nos. 299.97 ₹

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA

297 breaking capacity & confirms to IS : 8828 in existing box having following capacity. (B) 40 Amp. cat III. 20 nos. 330.27 ₹

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed.

298 (i) 25 Amps.DP. cat III. 8 nos. 1969.5 ₹

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed.

299 (ii) 40Amps. DP . cat III. 90 nos. 2235.13 ₹

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not incorporate any electronic component. for

300 following Max. rating erected as directed. (iii) 63 Amps. DP. cat III. 15 nos. 2654.28 ₹

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate

301 any electronic component for following Max. rating erected as directed. (ii) 40Amps. FP. cat III. 8 nos. 2637.11 ₹

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having following capacity

(a) 6 to 32 Amp

302 Cat.III . 50 nos. 578.73 ₹

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking

303 capacity & confirms to IS :8828 in existing box having following capacity (c)63 Amp. cat III. 60 nos. 737.3 ₹

304 Half / One Module Blanking Plate of Standerd Size. 150 nos. 9.09 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal single phase outgoing. (b) sheet steel double door

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal single phase outgoing. (b) sheet steel double door

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type

307 (PPI). (b) sheet steel double door. (i)4 way . 15 nos. 2339.16 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type

308 (PPI). (b) sheet steel double door. (ii)6 way. 15 nos. 2913.85 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal single phase outgoing. (b) sheet steel double door

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type

cubical panel board having necessary IP-42 protection & above as per requirements made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket, heavy duty end terminal connections complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved manufacturers with

following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

310 (i) with 350 mm depth . 30 sq.mtr 14902.55 ₹

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.

311 (b) One wire 1.50 sq. mm. 30 mtrs. 17.17 ₹

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (d) One wire

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (e) One wire 6.00 sq.

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (f) One wire

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (g) One wire

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (h) One wire

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity

ICU of 50 KA and above at 415 V having Normal current rating 400A. with variable Thermal & magnetic

release suitable to work on A.C.supply 50 c/s. With all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

317 ICS=100% of ICU only Cat III 8 nos. 25228.79 ₹

Approved make Earth fault Relay suitable to mount with inter connection to moulded case circuit breaker

having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections

& complete erected in existing M.S.housing.

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

319 Cat-lll 4 nos. 22255.35 ₹

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape for phase sequence of following current carrying

capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

320 (D) Suitable for 400 Amp. capacity . 6 mtrs. 7319.47 ₹

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape for phase sequence of following current carrying

capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

321 (B) Suitable for 200 Amp. capacity . 4 mtrs. 3202.71 ₹

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED

display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring etc .with

322 manufacturers calibration certificate. 6 nos. 1275.63 ₹

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED

display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected

323 on existing panel board with all connection, wiring etc .with manufacturers calibration certificate. 4 nos. 1558.43 ₹

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing

324 panel board with necessary connections. 8 nos. 317.14 ₹

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete

325 erected with necessary connections. 6 nos. 43.43 ₹

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes

having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation suitable for following type of applications. [B]

For Electrical installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy Soil

-Length of Pipe : 2 mtr

326 -Back filling Compound :1 no. Bag of 25 Kg. 8 nos. 7095.25 ₹

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes

having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation suitable for following type of applications

[C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other

than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

327 -Back filling Compound :2 nos Bags of 25 Kg. 18 nos. 10593.89 ₹

328 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 500 kg. 794.87 ₹

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/

329 Transformer LT panel board, Motors etc. using proper clamp. 150 kg. 77.77 ₹

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel

330 board, Motors etc. using copper clamp. 150 kg. 794.87 ₹

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (I)

331 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core). (Main cable from transformer to meter panel. ). 1300 mtrs. 1168.57 ₹

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (D)

332 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core). 300 mtrs. 378.75 ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of

following size of cables. (C) 4 core 6 Sq. mm Cu. Conductor YWY cable. (Main feeder Panel to PDB /

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of

334 following size of cables. (A) 4 core 2.5 Sq. mm . (Main feeder Panel to Streetlight fixtures .). 600 mtrs. 271.69 ₹

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as

335 directed of following size. (J) 4 core 2.5 Sq. mm. 800 mtrs. 168.67 ₹

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed. (e) 1.50 Sq.mm 3 core round PVC sheathed. - streetlight

336 pole box to fixture & from DB MCB to bollard lights. 1300 mtrs. 46.46 ₹

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables. (H) 3 & 1/2

337 core 240 Sq. mm . (Main cable from transformer to meter panel. ). 20 nos. 247.45 ₹

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables. (C) 3 & 1/2

338 core 70 Sq. mm . (Main cable from transformer to meter panel. ). 35 nos. 103.02 ₹

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 2 to

339 core 6 Sq. mm. (Main feeder Panel to LDB, PDB.). 50 nos. 38.38 ₹

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut

340 bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm. (Main feeder Panel to LDB, PDB.). 250 nos. 8.08 ₹

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut

341 bolts in an approved manner. (B) 10 Sq.mm. 250 nos. 10.1 ₹

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut

342 bolts in an approved manner. (E) 70 Sq.mm. 250 nos. 25.25 ₹

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut

343 bolts in an approved manner. (G) 120 Sq.mm. 40 nos. 45.45 ₹

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut

344 bolts in an approved manner. (K) 300 Sq.mm. 60 nos. 98.98 ₹

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable.

below ground /road surface for enclosing cable and back filling the same to make ground as per

345 original.(A)50 mm dia. 550 mtrs. 62.62 ₹

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable.

below ground /road surface for enclosing cable and back filling the same to make ground as per

346 original.(D)120 mm dia. 550 mtrs. 137.36 ₹

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.). (A) Tube Light with integral driver. (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet. cat

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.). (A) Square/ Circular shaped Surface/Recessed Mount

348 Downlight with provision for spring loaded mounting clips complete.IP20. (i) 5-10 watts,Surge-2 KV. 150 nos. 165.64 ₹

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.). (A) Square/ Circular shaped Surface/Recessed Mount

349 Downlight with provision for spring loaded mounting clips complete.IP20. (ii) 12-14 watts, Surge-2 KV. 200 nos. 238.36 ₹

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.). (A) Square/ Circular shaped Surface/Recessed Mount

350 Downlight with provision for spring loaded mounting clips complete.IP20. (iv) 22-24 watts, Surge-2 KV. 60 nos. 373.7 ₹

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.). (E) Under Water Light,12V DC including Driver,IP-67 with die-cast/deep drawn housing with

351 impact resistance clear toughened glass. (ii) 12 watts. cat III. 20 nos. 1032.22 ₹

(c) LED Bollard fittings of minimum height 1000 mm & dia.100mm having polycarbonate clear/milky

diffuser mounted on 3mm thick aluminium finished powder coated pipe with base plate 160x160mm with

352 erection by M8x75mm fastner with required RCC foundation.IP65 for 18watt and above ,surge-4kv cat-III. 60 nos. 4461.17 ₹

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminium housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.). (A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage

353 protection. (iii) above 24 to 36 watts. Cat - III. 35 nos. 2201.8 ₹

Providing street light pole bracket consisting of Light Class MS.pipe of 4.2 cms. outside dia. complete

with suitable M.S. sleeve tubing of approximate 45 cms. and length suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fastners for fixing the brackets and having spread of 1 mtr. length

with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut

complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms.

354 [A] Single Arm bracket 1 Mtr. 35 nos. 561.56 ₹

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend

local wind speed with integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable

termination to be erected With Suitable foundation (Included) as per details given by manufacturer

considering site requirement.

(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base

355 plate, 4-M20 Bolts and 600mm long J-Bolt.Approx Pole weight 59 kg. 35 nos. 8192.11 ₹

Supplying and erecting B class Galvanized iron pipe having smooth finished bore of the pipe on both

ends erected nuts and bolts along the pole / wall shaping the pipe as per site requirement. Pipe dia as

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of following capacity

for switch On-Off street lights on time scheduling basis made from 16G CRCA sheet duly epoxy power

painted inside and outside with hinged doors and locking arrangement consisting of suitable size of

Pole MCB and 4 pole contactor (cat-III)with analog time switch, auto manual switch of same make and

suitable input and output Bakelite terminals and with door earthing approved by Engineer in charge. (A)

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob &

hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps& earth bolt of following size of box. (C)150mm x

Philips Gamma Wall Washer - Elegance Meets Modern Design for Brilliant Lighting!

Illuminate your space with the grace of modern design through Philips Gamma Wall Washer. These

elegantly crafted wall washers are a perfect embodiment of contemporary aesthetics. Their soft corners

and stylish anthracite color accentuate the gentle illumination they cast in two directions. With an IP65

rating, you can confidently use this product both indoors and outdoors.

Superior Illumination: The Philips Gamma Wall Washer offers superior illumination that enhances the

beauty of any space.

Classy Anthracite Finish: With its classy anthracite finish, these wall washers not only provide excellent

lighting but also elevate the aesthetic appeal of their surroundings.Premium Aluminum Material: Crafted

from premium aluminum material, these wall washers are built to last. Their robust construction

ensures longevity and performance.

Optimum Performance: Philips Gamma Wall Washer delivers optimum performance, providing a

captivating lighting experience wherever they are installed.

IP65 Fixture for Outdoor and Wet Areas: The IP65 rating makes these wall washers suitable for both

outdoor and wet areas, offering versatility in their usage.

Experience superior illumination, modern design, and exceptional performance with Philips Gamma Wall

Washer. Whether used indoors or outdoors, their elegant presence will transform your space.

Bulb type: Bulb included (Warm White)

2 way: 2W, 79mm (length) x 77mm (width) x 36mm (height)

2 way: 4W, 119mm (length) x 80mm (width) x 38mm (height)

359 2 way: 7W, 168mm (length) x 80mm (width) x 41mm (height) 90 nos. 4545 ₹

Say goodbye to boring step lights and welcome the Philips Stride Step Light into your home! Designed to

add a touch of elegance and functionality, these unique step lights are perfect for illuminating your

pathways, stairs, and outdoor areas, ensuring every step you take is safe and stylish.

Unique Design: Stand out from the crowd with a modern aesthetic that complements any outdoor decor.

IP54 Rated: Provides reliable protection against dust and water, making it suitable for various outdoor

environments. (Note: Not suitable for areas where rain falls directly on the product.)

Sturdy Construction: Built from durable aluminum, these step lights are designed to withstand the

elements while maintaining their stylish appearance.

Versatile Lighting: Perfect for illuminating steps, pathways, and outdoor spaces, enhancing safety and

Net Quantity: 1 number

Bulb Type: in-built LED

360 Dimensions: 85mm (Length) x 85mm (Width) x 42mm (Height) 100 nos. 2626 ₹

Illuminate Your World with Philips Marathon LED Rope Light - Brighten Up Any Space with Elegance and

Philips Marathon LED Rope Light – the epitome of radiant and flexible lighting for both indoor and

outdoor settings. This 50-meter wonder is designed to enhance your surroundings and create a dazzling

atmosphere, making it perfect for a wide range of applications.

Multiple Color Options: Choose the perfect ambiance with our range of color choices. Whether you prefer

the inviting warmth of Warm White/Yellow or a different hue, you'll find the ideal option to suit your style.

Waterproof with IP65 Rating: Our rope light boasts an IP65 rating, making it waterproof and weather-

resistant. It can withstand harsh outdoor conditions and provide superior longevity, ensuring it shines

brightly for years to come.

Flexible, Slim & Compact: The slim and compact design of the Philips Marathon LED Rope Light enables

you to shape and bend it as you desire, making it perfect for curved or angled patterns or continuous

rows. It adapts effortlessly to various settings.

Versatile Applications: Whether it's for home decoration, outdoor projects, hotels, offices,

advertisements, showcases, shopping malls, stores, or festive occasions like Diwali, Christmas, and

New Year, this rope light adds a touch of brilliance to any space.

Low Power Consumption: Enjoy the beauty of bright and attractive lighting without worrying about high

energy bills. This LED rope light is energy-efficient, safe, and reliable for your peace of mind.

Easy Installation: Installing this rope light is a breeze with plug-and-play simplicity. It's ready to use, and

its 50-meter length ensures you have plenty to work with.

Superior Light Output: Experience the best-in-class brightness with an impressive 400 Lm/Mtr light

output. With 72 LEDs per meter, this rope light delivers brilliantly uniform illumination.

Transform your surroundings into a shining and attractive space with the Philips Marathon LED Rope

Light. Whether it's enhancing your home's aesthetics, creating a magical ambiance for festivities, or

elevating your commercial spaces, this rope light is the perfect choice.

Discover the difference that premium Philips lighting can make in your life. Light up your world with

361 elegance and radiance. Upgrade your lighting today with the Philips Marathon LED Rope Light - Your 30 nos. 9292.2727 ₹

architectural design with asymmetric beam. These fixtures have a life span of 70,000 burning hours and

are available in symmetric & asymmetric beam. Available in 60W with an output of 2244 lumens. These

lights come in powder coated colors.

These high-power wall washers can enhance architectural designs, wall textures & city landscape. Our

wall washers are top of the line products with IP66 rating and they also come with adjustable brackets

which help to adjust beam direction. One can also combine dimming or non dimming drivers with DMX

controllers to get multiple lighting effects.

Compare us with the best manufacturer before buying our LED outdoor lighting products

A free installation guide is provided with each product

Check out the fascinating designs, quality, and prices

Click each of the boxes below and download individual products of your choiceMaterial Specifications

24Single | 8R8G8B

Temperature of Working Condition:

Humidity of Working Condition:

362 Protection Grade: 30 nos. 6565 ₹

Driveway lights for parking lots, driveways & pavements. Modern look, rust & corrosion proof fixtures

with compact design. LED drive-over lights are recessed mounted lights with wattages for single,

double, triple and four side light. Wattages are low starting at 0.8W with maximum 4W. Material of these

fixtures are robust and are made of die-cast aluminium body with powder coated colors. Front cover of

the fixtures are made of SUS316 stainless steel. These walk over lights are IK10 and IP67 rated. Walk

over lights can be installed in drive ways or garden and can be used as a path finder.

Ground lights are a great way to improve the safety and visibility of your driveway, and can also add a

touch of style. Positioning ground lights on either side of the driveway is a great way to guide parking

and walking at night. With a variety of color temperatures available, you can find the perfect light to suit

your needs. Our selection of products come with BIS certification. Outdoor LED drive over lights change

the ambience of the area.AS PER ENGINEER INCHARGE

Product & Manufacturing process certifications include UL, CUL, SAA, TUV, CE, BIS, ISO-9001 & ISO -

Over 20+ stunning designs. IP67, 0.8W-4W.

Compare us with the best Drive over lights manufacturer before buying our LED outdoor lighting

A free installation guide is provided with each product.

Check out the fascinating designs, quality, and prices.

Click each of the boxes below and download individual products of your choice.

High quality architectural outdoor lighting at economical prices & 3 years warrantyAS PER ENGINEER

363 INCHARGE 60 nos. 5555 ₹

Supply, installation, testing and commissioning of premium rectangular crystal “jhumar” chandelier

complete as per specification: ceiling-mounted luminaire with SS-304 mirror-finish canopy not less than

2000 mm (L) × 750 mm (W) × 60 mm (H), factory-wired with minimum 18 recessed LED spot modules (≥3

W each; total fixture wattage ≥72 W) delivering ≥6,000 lm, CCT 3000–4000 K, CRI ≥80, beam 24–40°, glare-

controlled lenses; high-purity K9 optical crystal spheres (Ø30–50 mm) arranged on individually crimped

clear SS micro-suspension wires (Ø0.4–0.6 mm) to form a wave pattern; overall drop/height adjustable

up to 1000 mm from false/solid ceiling; electronic, isolated LED driver 230 V ±10%, 50 Hz, PF ≥0.90, THD

≤15%, efficiency ≥85%, inbuilt ≥2.5 kV surge protection, short-circuit/over-voltage/over-temperature

protections; ingress protection IP20 minimum; complete internal wiring with FRLSH copper leads, all

terminations using crimped lugs; fixing on concealed MS support frame with zinc-plated anchor

fasteners (≥8 mm dia, min. 6 nos.) and anti-vibration washers, including cutting/patching of ceiling and

making good; finish: polished chrome/nickel, corrosion-resistant; all metal parts SS-304 or zinc-alloy

with anti-tarnish coating; crystals and metal parts free from bubbles, chips and sharp edges; compliance

to IS 10322 (luminaires) and IS 15885 (LED controlgear) or equivalent IEC; supply to include hanging

layout, suspension cut-list, and spares (10% extra crystals + 4 extra suspension wires) with O&M

manual; contractor to provide on-site assembly, alignment, testing, 2-hour burn-in and demonstration;

24-month onsite warranty on fixture/driver/finish from handing-over; approved makes:

Philips/Jaquar/Havells/Wipro/Crysta/Equivalent, subject to Engineer-in-Charge approval; rate inclusive

of all materials, labour, scaffolding/working platform, connections up to ceiling junction box, and all

364 taxes & duties—job complete in all respects. 1 EACH 186850 ₹

Premium square flush-mount crystal jhoomar with integrated LED downlights, featuring a gold-finished

ceiling canopy in corrosion-resistant MS/aluminium (powder-coated/anodized) and a cascading array of

optical-grade K9 crystal spheres suspended on clear beads and stainless-steel micro-cables for a

sparkling waterfall effect; includes 4 nos. recessed COB LED downlights (≈6–8 W each) with high-

efficiency electronic drivers, 220–240 V, 50 Hz operation, Power Factor ≥0.90, CRI ≥80, and CCT

3000–6000 K (as specified), all hardware in brass/S.S. with concealed mounting plate, safety lanyards,

and clear installation kit; suitable for living rooms, lobbies, and premium interiors, delivering glare-free

ambient illumination with decorative scintillation, low maintenance, and long service life.AS PER

365 ENGINEER INCHARGE 6 EACH 17675 ₹

Heavy-duty LED projector/flood light with adjustable yoke mount, die-cast aluminium LM6 housing and

integral heat-sink fins, powder-coated architectural grey; modular multi-LED array with precision

PMMA/PC lenses for narrow/medium/wide beams (≈10°/30°/60° options), output class 30–200 W (as

specified), CRI ≥80, CCT 3000/4000/5700 K, flicker-free isolated driver (220–240 V, 50 Hz) with PF ≥0.95,

THD ≤10%, 6–10 kV SPD; IP66 weatherproof and IK08/IK10 impact rated with silicone gaskets and

stainless-steel hardware; tempered glass/clear cover, surge-/over-voltage/short-circuit protection,

>50,000 h L70 at Ta 35 °C; tilt-lock bracket with slotted holes for wall/ground/facade mounting; suitable

366 for building facades, signage, landscape and area lighting. 8 EACH 10605 ₹

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over

367 the run and back filling the same and making the surface as normal ground. 841 mtrs. 55.55 ₹

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe

bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user,

368 Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes) 8 nos. 299.97 ₹

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm

in length, 900 mm height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for

legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved

369 enamelled silver paint. 10 nos. 942.33 ₹

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front

370 glasses, for treatment of person suffering from Electric shock with minimum 50" diagonally size. 15 nos. 130.29 ₹

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @

an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank

surrounded by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet

371 connection. The body of water cooler will be made from Stainless Steel. 4 nos. 55893.4 ₹

S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or more having three phase motor

capacity not more than 3 H.P. of different range with following capacity . Lifting and Lowering taken

extra.(B) (15 stage) 130 LPM discharge at 50 mtrs. Respectively head suitable for 50 mm dia. delivery

372 pipe CAT.III 2 nos. 20226.26 ₹

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three

phase submersible motor having.[D] For 5 HP 3 phase open well horizontal mono block pump set

373 suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe 2 nos. 18746.61 ₹

Supplying and erecting push button operated fully automatic Star-Delta starter with 3 Nos. of 15A.rating

contactors and directly operated thermal overload relay having 10-21A range and erected in sheet

steel enclosure for 3 phase 415V. 50 c/s. A.C. motors from 7.5 to 15H.P. complete erected on.(A) P.W.

374 Block with necessary connection.CAT-lll 2 nos. 9758.62 ₹

Supply of 500 KVA Outdoor type Compact Substation consisting of Transformer,HT switchgear and LT

Switchgear and confirming to IEC-62227. a) Transformer: 500 KVA Copper wound 11KV /433 V DYn11, Dry

Cast resin type Transformer with tapping range +10 to -10% @ 2.5% ( with tolerance), class F , with surge

restorers, Digital WTI, IS1171 as per b) HT Compartment: 11KV, 21kA for 3 Sec . 630 A 50 Hz, gas insulated

VCB in SS tank in sheet enclosure having provision for one no. direct connection of Incoming supply

cable upto 300sq mm and one no. VCB( Manually charging & closing) in series with LBS between VCB

and Transformer, Self Powered Relay 3 O/C +1 E/F Relay type CSPR-V5, mechanical ON/OFF indicator,

trip coil , Manual Close & Trip PB, live cable indicator, mechanical interlocks, pad locking facility, SF6 gas

manometer, cable boots, 3 nos. CTs with Ratio -/1A, Cl: 5P10, 2.5 VA for protection c) LV side

compartment : one no. ACB of 800A, 50kA, 4Pole, Microprocessor based release with arrangement for

375 bottom cable termination 1 Each 1666508.08 ₹

( 100% for phase & 50% for N, Current density - 1A/ sq mm) The enclosure should be of IK10 type.The

Enclosure shall construction shall be GI of thickness at least 1.6/2mm.The enclosure shall be Powder

Coated. Each compartment will be provided with the door and pad locking arrangement. The

Compartment illumination lamp with door operated switch shall be provided for each compartment. The

Transformer compartment will have IP-34 ingress protection, whereas the HT/LT compartment will have

IP-54 protection.The connection between HT and Transformer shall be by 3 runs of single core 95 sq mm

XLPE aluminium cable and between Transformer to LT switchgear shall be appropriate rating Aluminium

376 PVC sleeved Busbar

Add extra Rs 9000/- for integrated steel cubical panel IP 54 to house upto 03 Nos additional outgoing

switchgears with proper rating busbar drop,supports etc with arrangment for cable termination etc.(

377 Switchgears is not included in this)

Add extra Rs 16000/- for integrated steel cubical panel IP 54 to house upto 06 Nos additional outgoing

switchgears with proper rating busbar drop,supports etc with arrangment for cable termination etc.(

378 Switchgears is not included in this)

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front

379 glasses, for treatment of person suffering from Electric shock with minimum 50" diagonally size. 3 Ea. 130.29 ₹

380 Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. 2 Ea. 214.12 ₹

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe

bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user,

381 Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes) 2 Ea. 299.97 ₹

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra

handle at bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and

382 kept on existing stand provided or hung on wall hook. 2 Ea. 214.12 ₹

Providing, and erecting 11 KV D.P. 9 mtr. high Structure made of 6" x 3" ‘I’-Section Girder, 4" x

2"channels, clamps, nuts, bolts etc. Suitable for erection of the followings duly connected with

necessary ACSR conductors. as per drawing approved by the Engineer- in charge complete with

following. Height as per IS 7 Mtr above ground )(E) The above D.P. structure should be earthed with

mm.X 3 mm thick double copper earth strips run separately and connected with separate copper plate

383 earth electrode. 1 Ea. 98433.59 ₹

Providing and erecting ISI Marked 3core 120 Sq.mm XLPE insulated 11 KV armoured cable Aluminium

conductor IS-7098 to be laid on wall with clamps or in provided cable trench / pipe approved manner as

384 directed. 278 Mtr. 1542.27 ₹

Providing and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/

385 Elastimold make suitable for 11 KV XLPE cable 3core 95 & 120 Sq.mm

386 (A) Outdoor type 2 Ea. 14611.67 ₹

387 (B) Indoor type 2 Ea. 8004.25 ₹

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968

& BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally

enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than

following capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories

like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter,

oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with

adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube

oil filter, 12 / 24 volts electric starting equipment complete with standard heavy duty battery, dynamo, cut-

outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust

388 silencer and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted

fuel with level indicator and piping and drip proof alternator, self excited, self regulated, screen

protected, with excitation system, capable of delivering the rated system output at 415 volts, 3 phase,

PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation +/- 5% of

rated voltage from no load to full load. Both the engine and alternator fitted on a common fabricated

steel base plate with antivibration mounting engine and alternator both connected to each other by

flexible flange coupling and with floor/wall mounted control panel box comprising of voltmeter

389 ammeter, selector switches, ACB / MCCB / MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with

provided suitable capacity armoured cable and complete with Acoustic enclosure (canopy) made out of

16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick conforming to

IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool covered from inside the

canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as

per PVCT norms. Erection, commissioning and satisfactory testing as per requirement with first filling of

fuel, oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all

390 necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below.

391 (R) Continuous rating of 250 KVA ,BHP not less than 309 BHP 2 Each 1969798.96 ₹

392 (S) Continuous rating of 320 KVA ,BHP not less than 375 BHP 2 Each 2640810.64 ₹

Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical

Panel fabrication should be type tested as per IEC 61921, 61439:1&2 Capacitor Duty Contactor for switching

as per following Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal

earth fault protection Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal

earth fault protection,Copper tinned insulated Busbar,Cubical panel should be indoor type with IP 43 and

IK 10,Metalized polypropylene film tye3-phase 550Volt Capacitor,De tuning Reactor for each

capacitor,Panel having Short Circuit and Overload protection,Each step Capacitor having suitable MCB

with Sc, OL, internal earth fault relay,Each stage having Stage Contactor (Capacitor load rating),PF

regulator master controller having suitable steps with LCD display, Rs 485 Communication port,

Indication LED Lamps for main incomer and ON-OFF for each capacitor bank,MS Chanel for Floor

393 mounting, Cable entry as per site situation,Cooling fans for panel (C)100KVAR 2 Each 288878.18 ₹

Providing & erecting approved make ATS panel suitable for following size of 3 phase, 415 V., 50 cycles,

A.C. diesel generating set complete of scope as detailed below:

1) Power module: Motorised Changeover switch with ATS controller, Auxiliary contactor with NO & NC

contacts with Automatic Battery Charger, indicating lamps for Generator ON, Mains ON, Load and

suitable control terminals and power terminals with neutral earthing studs. (G) ATS Panel for 180 /

394 KVA 3 phase DG Set 1 Each 91585.79 ₹

Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame With Twin Wall

Profile, Front Cover : High Transmission Low-Iron Tempered Glass (AR Coated), High efficency and

positive power tolerance Pmax: 0/+5, Module Efficiency should be approx. 18%-21%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with Bypass

diodes, 100% Electroluminescence test to ensure error free Modules, Thep. temp. co-efficient of the PV

module shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill factor 75% to be

used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty and

year Linear Power Warranty.,

Solar Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating

Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-

islanding Protection: Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over Current Protection

Integrated, Output Short Circuit Protection Integrated, Output Over Voltage Protection Integrated,

Protection Degree: IP65, User Interface LCD & APP,Datalogger & Communication: GPRS / Wi-Fi, Module

Mounting Structure: Seamless Box Pipe / 'C' Channel of suitable size for rooftop solar installations with

good stability agaist wind & weight load., Hot Dipped Galvanized steel coils. suitable arrangement for

base plate for foundation , solar panel mounting, the structure should be suitable for carry the load of

solar panel,wiring, sprinkler system etc. with necessary foundation work/wall mount, j bolt, anchor

fastner etc. the nut bolt used for installtion of stucture should be (SS 304) quality. and Balane of System

with necessary Swithgears (Suitabel size and protection of ACDB & DCDB), inter connecting wiring,

earthing system, lightining arrester system, all liasoning work with various gov. dipartment like state

nodal agency,DISCOM & CEIG is included in agency scope . (Excluding GEDA Application fees, Solar

connectivity Charges, Meter connectivity Charges, Meter testing Charges.) . (E) Grid Tied Solar Power

Providing, installing, testing and commissioning a 12-inch two-way passive/bi-amp line array

loudspeaker Model PL-LA12, featuring a bass-reflex enclosure with a 12" LF transducer (2.5" voice coil,

neodymium magnet) and dual HF compression drivers (1.75" voice coils) mounted on an optimized

waveguide. The system shall provide 90° × 15° coverage, system bandwidth of 53 Hz–20 kHz (-10 dB with

EQ), system sensitivity of 102.3 dB @ 1W/1m, and maximum SPL of 129 dB. The loudspeaker shall operate

at 49 Vrms, with 300 W continuous power at 8 Ω, equipped with 2 × Speakon NL4 connectors and 1 ×

Euroblock (4-pole, 8–24 AWG) in parallel. Rigging angles shall be selectable at 0.5°, 1.5°, 3°, 4.5°, 6°, 8°,

10°, 12°, supporting ground stack of up to 3 modules (with PL-LA12-AF or PL-SUB18) and flown arrays up

to 12 modules, or 3 × PL-SUB18 + 10 × PL-LA12 using the array frame. The enclosure shall be constructed

from impact-resistant ABS, finished in Black (RAL 9011), with IP54 weatherization, stainless steel

screws, UV-resistant and corrosion-treated grille, aluminum rigging hardware and hydrophobic

stainless-steel mesh for environmental protection. The input cup shall include IP65 sealing with cable

gland. Overall dimensions: 15.4 × 24.4 × 15.8 in (392 × 620 × 381 mm) with a total weight of approximately

20–21 kg. Work includes rigging frame integration, mechanical alignment, safety cabling, structured

wiring, tuning, EQ voicing, system testing and commissioning as per approved design and manufacturer

396 requirements. 12 Nos 372336.5 ₹

Providing, installing, testing and commissioning an 18-inch passive subwoofer Model PL-SUB18,

featuring a high-performance 18" (460 mm) low-frequency transducer with 4" (100 mm) voice coil,

housed in a bass-reflex enclosure optimized for deep, controlled low-frequency reinforcement. The

system shall provide system bandwidth of 34–100 Hz (Sub XO 80 Hz), 34–110 Hz (Sub XO 100 Hz) and

34–140 Hz (Sub XO 125 Hz) with system sensitivity of 96 dB @ 1 W/1 m and maximum continuous SPL of

126 dB. Coverage shall be omni-directional, with cardioid mode selectable through Q-SYS, requiring a

minimum of two units for directional control. Connectivity shall include 2 × Speakon NL4 connectors and

1 × 4-pole Euroblock input (8–24 AWG) wired in parallel. The enclosure shall be constructed from

exterior-grade plywood, finished in Black (RAL 9011) with IP54 weatherization including stainless

screws, UV- and corrosion-treated grille, hydrophobic stainless-steel mesh, polyurea paint coating, and

an input cup with IP65 sealing and cable gland. The subwoofer shall include integrated retractable

rigging hardware supporting secure ground-stacking or flying when connected to the PL-LA12-AF Array

Frame, and shall be deployable in arrays of up to 10 × PL-SUB18 (without array frame) or 3 × PL-SUB18 +

10 × PL-LA12 (with array frame). Recommended amplification shall be via Q-SYS CX-Q 8K4 with up to one

subwoofer per channel. Overall dimensions shall be 20.9 × 24.4 × 29.15 in (531 × 620 × 740.6 mm) with a

total weight of 102.2 lb (46.3 kg). Work includes mechanical fixing, rigging safety verification, wiring,

polarity testing, cardioid/omni configuration, alignment, tuning and commissioning as per OEM system

397 design and manufacturer guidelines. 4 Nos 312280.89 ₹

398 Array frame for use with PL-LA12, Color - Black 2 Nos 120045.57 ₹

Providing, installing, testing and commissioning a four-channel network power amplifier Model CX-Q

8K4, designed for integration into the Q-SYS ecosystem. The amplifier shall deliver up to 8,000 W total

output (four channels) and support Low-Z, 70 V or 100 V direct-drive functionality on all channels. It

features a hybrid high-efficiency Class-D powertrain built on the PowerLight™ platform, plus FlexAmp™

and FAST™ (Flexible Amplifier Summing Technology™), enabling asymmetric channel loading,

bridged/parallel operation (up to 200 Vrms or 35 A current) and tailored power deployment. The amplifier

has a wide operational bandwidth of 20 Hz–20 kHz (+0.2 dB / –0.7 dB), typical distortion of 0.02-0.05% at

8 Ω, and noise output (muted) >102 dB unweighted, >106 dB weighted. It includes four mic/line inputs with

+12 V phantom, eight bi-directional GPIO ports, Q-LAN network connectivity, universal 100-240 V AC

power supply with active PFC, protection features for short circuit, thermal, RF, DC faults, inrush limiting

and active muting. Dimensions are 89 mm (H) × 482 mm (W) × 406 mm (D) (3.5″ × 19″ × 16″), with net

weight approximately 11.8 kg (26 lb). Work scope includes rack-mounting, power and signal wiring,

network configuration, firmware upgrade, load verification, channel gain setting, DSP voicing, monitoring

399 setup and commissioning as per OEM guidelines. 2 Nos 648083.67 ₹

Providing, installing, testing and commissioning an 8-inch two-way surface-mount loudspeaker Model

AD-S8T-BK, featuring an effective frequency range of 55 Hz – 20 kHz, broadband sensitivity of 90 dB

SPL, and maximum continuous SPL of 113 dB (119 dB peak). The loudspeaker shall incorporate a weather-

resistant 8" LF transducer with 2" (51 mm) voice coil, and a 1" exit HF compression driver with 1.4" voice

coil, delivering a 105° conical DMT™ coverage with directivity factor Q = 7 and directivity index 9 dB. Rated

noise power shall be 200 W / 40 Vrms at 8 Ω, with recommended amplifier power of 400 W (program

power). Transformer taps shall include 70 V: 60 / 30 / 15 / 7.5 W and 100 V: 60 / 30 / 15 W, with 8 Ω bypass

available. The enclosure shall be constructed from painted ABS polymer, with a powder-coated

aluminum grille and powder-coated aluminum X-Mount bracket, enabling flexible vertical or horizontal

aiming. Input connectivity shall be via Euroblock connector with parallel output terminals, provided with

an input panel cover. The loudspeaker shall meet IP54 ingress protection and be suitable for indoor and

outdoor environments, tested as per MIL-STD-810G standards: salt fog (100 hrs), humidity natural cycle

B2 (7 days), and temperature cycling from −20°C to +50°C. monitoring setup and commissioning as per

400 OEM guidelines. 8 Nos 84220.87 ₹

401 SITC AD-YMS8-BK Yoke mount for the AD-S8T. Color - Black. 4 Nos 23028 ₹

Providing, installing, testing and commissioning a high-performance 4-channel Q-SYS network amplifier

Model CX-Q 8K4, designed for Low-Z, 70 V and 100 V distributed audio systems, delivering up to 8,000 W

maximum power with flexible output deployment. The amplifier shall feature typical distortion of

0.02–0.05% at 8 Ω, 0.04–0.1% at 4 Ω, and maximum distortion of 1.0% across 4–8 Ω loads. Frequency

response shall be 20 Hz–20 kHz (+0.2 dB / –0.7 dB) with noise output better than 102 dB unweighted and

>106 dB weighted. Gain settings shall be 33 dB / 35 dB / 38 dB, with a damping factor greater than

and input impedance >8 kΩ balanced and >4 kΩ unbalanced. The unit shall offer comprehensive

protection including short circuit, open circuit, over-current, over-voltage, thermal, RF, DC fault

shutdown, active inrush limiting, and on/off muting. The amplifier shall support multiple advanced power

configurations: • 4 Independent Channels: 1250 W (70 V / 100 V), 625 W @16 Ω, 1250 W @8 Ω, 2400 W @4 Ω,

Parallel Modes (AB / CD): Up to 4000 W @2 Ω • Triple-parallel Mode (ABC): Up to 4500 W @2 Ω • Quad-

parallel Mode (ABCD): Up to 7000 W @1 Ω • Bridged + Parallel (AB+CD): Up to 8000 W @2 Ω The unit shall

feature a universal 100–240 VAC power supply with active PFC, and comply with UL, CE, RoHS/WEEE,

and FCC Class B safety and EMC standards. Connectivity shall include Euroblock input connectors and

all necessary GPIO, with the carton including IEC mains cable, Euroblock plugs and quick start guide. The

amplifier shall integrate natively into Q-SYS for full monitoring, DSP, telemetry, protection status, event

logs and real-time diagnostics. Work includes rack-mounting, power and signal cabling, Q-LAN network

configuration, firmware update, output allocation (bridged/parallel/independent), load verification,

402 channel gain optimization, DSP voicing, monitoring setup and full commissioning as per OEM guidelines. 1 Nos 648083.67 ₹

Providing, installing, testing and commissioning a networked audio DSP processor Model Core 24f,

featuring 64-bit Intel architecture and 32-bit floating-point audio processing with 160×160 Q-LAN audio

channels, 80×80 network streams, 24× analog I/O (8× mic/line, 8× line out, 8× Flex channels), 8×8 Dante

channels (expandable to 64×64), 24 AEC channels, 10 NM-T1 microphone capacity, 36×36 WAN/media

streaming channels, and support for up to 96 managed Q-SYS peripherals. Device shall support 8 VoIP

softphones, 4-channel recording, 16-channel playback expandable to 64 channels, and onboard 128 GB

media storage with at least 100 GB available for user media files. The processor shall include 2 × RS-232,

8×8 GPIO, front-panel OLED display, system status LEDs, USB-A and USB-C ports supporting AV

bridging, USB HID routing, USB audio hosting (up to 16×16 channels, 3 devices), and USB audio bit depths

up to 32-bit float. USB-A inputs shall support mono 48/16 kHz signals, while USB-A outputs support

stereo 48 kHz at 8–32 bit. Physical dimensions shall be 482.6 × 310.9 × 43.6 mm (1RU) with weight

kg, and power consumption 60 W typical / 150 W max. Operating temperature range is 0°C to 50°C,

humidity tolerance 5–85%, with regulatory approvals including FCC, ICES-003, EN 55032/55035, RoHS,

WEEE, REACH, RCM, IEC/UL 62368-1. Installation includes rack mounting, network configuration, device

addressing, peripheral registration, audio routing, VoIP setup, DSP programming, failover testing, and

403 commissioning as per OEM guidelines. 1 Nos 698778.6 ₹

Providing, installing, testing and commissioning a two-way active loudspeaker Model CP12, featuring a

high-performance 12 in (305 mm) LF transducer with a cone driver and a 1.4 in (35.6 mm) HF

compression driver, powered by a Class-D amplifier module delivering 800 W peak to LF and 200 W peak

to HF. The system shall provide a frequency response of 49 Hz – 20 kHz (-6 dB), frequency range of

Hz – 20 kHz (-10 dB), and nominal 75° axisymmetric coverage, with maximum rated SPL of 126 dB. User

controls shall include Power, dual Gain controls, Mic-Boost switch, and 6-way contour selection, with

indicators for Power, Input Signal, MIC Input, and Limiter activity. Connectivity shall include 2 × locking

XLR/F–¼" combo inputs (Line and Mic/Line), 1 × 3.5 mm TRS stereo input, 1 × XLR/M mix output, and IEC

mains input, powered by a universal 100–240 VAC, 50/60 Hz supply. Typical AC power draw shall be

A at 100 VAC and 0.31 A at 240 VAC. The enclosure shall be constructed from rugged polypropylene,

finished in Black (RAL 9011), with 18-gauge powder-coated steel grille and integrated M8 threaded

attachment point for mounting applications. gain structure setup, contour selection, signal testing,

404 alignment, and commissioning as per OEM guidelines. 4 Nos 68434.57 ₹

Providing, installing, testing and commissioning a 6.5" two-way ceiling loudspeaker Model AC-C6T,

featuring a 6.5" polypropylene LF driver with butyl rubber surround and a 0.86" silk-dome HF tweeter,

providing an effective frequency range of 65 Hz–20 kHz, sensitivity of 89 dB SPL, maximum SPL 104 dB

(110 dB peak), and 110° coverage. Rated at 30 W / 15.5 Vrms, 8 Ω impedance, with transformer taps: • 70 V:

Connectivity: Euroblock with parallel output. Construction includes painted ABS baffle, powder-coated

405 steel grille, galvanized steel back-can. UL1480/UL2043 certified for plenum spaces. 4 Nos 19466.74 ₹

Providing, installing, testing and commissioning a compact 4-channel power amplifier Model SPA4-60,

featuring high-efficiency Class-D output circuitry delivering 60 W per channel at 8 Ω and 4 Ω (both

channels driven), and supporting 100 W total per bridged channel pair at 8 Ω / 4 Ω. The amplifier shall

support constant-voltage operation with 125 W at 70 V / 100 V in bridged mode, with a switchable 80 Hz

high-pass filter when operating in 70 V/100 V bridged mode. The system shall provide >100 dB signal-to-

noise ratio (A-weighted, 20 Hz–20 kHz), 25 dB maximum voltage gain, 1.23 Vrms (+4 dBu) input

sensitivity, and >10 kΩ balanced/unbalanced input impedance, with maximum input level of 12.3 V (+24

dBu). The amplifier shall include front-panel indicators for Power, Signal per channel, and Protect/Limit

status, with rear-panel controls for 4 Ω / 8 Ω / 70 V Bridged / 100 V Bridged operation per channel pair.

Construction shall support efficient thermal management, low heat output, and stable performance in

commercial audio environments. Work includes installation in equipment rack, Euroblock audio wiring,

AC mains connection, gain structure setup, integration with upstream DSP/matrix, load verification,

406 protection testing, and commissioning as per OEM guidelines. 1 Nos 131265.66 ₹

SITC of network switch Model NS26-300+, a 26-port managed PoE network switch pre-configured for

AV&C (Audio, Video & Control) systems. The unit provides 24 PoE+ powered ports within a total PoE

budget of 300 W, supports Q-LAN™, AES67 and Dante audio streams simultaneously on a single VLAN,

and pre-loads advanced QoS, IGMP Snooping/Querier, and multicast optimisation for real-time AV traffic.

Connectivity includes SFP uplink ports for fibre or 10G uplink expansion. The switch is delivered ready-to-

deploy with default IP 192.168.0.110 and default credentials as per Q-SYS documentation; it is designed for

plug-and-play integration into standalone AV networks using Q-SYS topologies. The enclosure is rack-

mountable, finished in black, and ships with firmware pre-configured for AV deployment, reducing

commissioning time and minimising IT support requirements. Work includes rack installation, cabling,

port labelling, VLAN segregation (if required), PoE power budgeting, firmware verification, and

407 commissioning as per OEM guidelines. 1 Nos 380009.47 ₹

Providing, installing, testing and commissioning a 7-inch capacitive touchscreen controller Model TSC-70-

G3, featuring a 1024 × 600 resolution, high-brightness IPS display with wide viewing angles for room

control, audio/video management, and user interface deployment via Q-SYS Designer. The interface shall

support Power over Ethernet (PoE) for single-cable connectivity, with integrated Q-SYS control engine,

allowing native rendering of Q-SYS UCI (User Control Interfaces) without reliance on external

processors. The unit shall incorporate a quad-core processor, responsive multi-touch gestures,

proximity sensor, ambient light sensor, and integrated back-box compatibility for wall-mount, tabletop

or glass-mount installation. The controller shall support widgets, custom graphics, logic linking, controls

for audio, video, camera PTZ, room scheduling, presets, GPIO events, and third-party device integration

through Q-SYS scripting. Network connectivity shall be via Gigabit Ethernet, secured with Q-SYS

authentication and encrypted communication. The housing shall be made of robust ABS/polycarbonate

with a scratch-resistant front surface, finished in black. Installation includes mounting, PoE switching

integration, UI loading, device registration, firmware updates, system tests and commissioning as per

408 OEM guidelines. 1 Nos 263478.7 ₹

Providing, installing, testing and commissioning a 10.1-inch tabletop touchscreen controller, Model TSC-

710t-G3, featuring a high-resolution 1280×800 capacitive touch display with wide-angle visibility and

integrated Q-SYS control processing for smooth user interaction. The unit shall be powered via PoE /

PoE+, enabling single-cable power and network connectivity. It shall include a fixed-tilt tabletop

enclosure, adjustable viewing angle, anti-slip base, ambient-light sensing for automatic brightness

control, proximity wake, and native UI deployment through Q-SYS Designer. The controller shall offer

fast UI rendering, secure Q-SYS network device registration, integration with UCI buttons, room combine

modules, AEC control, camera presets, logic controls and multi-room control pages. Installation includes

tabletop placement, PoE cabling, UI loading, Q-SYS platform integration, device linking, testing and

409 commissioning as per OEM guidelines. 1 Nos 62185.7 ₹

SITC of 22 channel Compact Mixing System (18 x Mic/Line + 4 x Mic/Stereo-Line), Auxiliary (MON, FX,

AUX) : 2 Pre, 2 Post, 2 Pre/Post switchable, Frequency Response, -3 dB, ref. 1 kHz : 15 Hz to 65 kHz,

Crosstalk, 1 kHz Channel to Channel < -80 dB, THD at 1 kHz < 0.005%, CMRR MIC input 1 kHz > 80 dB, Dual

stereo 24/48-bit multi effects processors, 100 Factory + 20 User, Tap-Delay, Digital Audio Interface

Channels : 4 In / 4 Out, AD/DA Conversion, Sampling Rate : 24-bit, 44.1 / 48 / 88.2 / 96 kHz (Including

410 Five year free maintenance with guarantee) 2 Nos 356929.96 ₹

SITC of UHF Wireless Cardioid dynamic handheld microphone system with Frequency Response of

Hz to 15 kHz (+1 dB, -3 dB), RF Sensitivity 20 dBuV at 60 dBA S/N ratio (50Ω termination), Total Harmonic

Distortion <1.0% (at 1 kHz, ±20 kHz deviation) , Dynamic Range > 110dB , on/off switch operating range

mtrs , RF Power Output High: 30 mW, Low: 10 mW (switchable), Multiple band with minumum

Microphone channels on band ; maximum Output level XLR / Balanced: +9 dBV & 6.3 mm (¼"") /

411 Unbalanced: +4 dBV. Power Supply 2 AA batteries.Operating range: 100 m. 4 Nos 80800 ₹

SITC of UHF Wireless Cardioid Cardioid condenser lavalier microphone with 55" cable terminated with

locking 4-pin HRS-type connector, Frequency Response of 100 Hz to 15 kHz (+1 dB, -3 dB), RF Sensitivity

20 dBuV at 60 dBA S/N ratio (50Ω termination) , Total Harmonic Distortion <1.0% (at 1 kHz, ±20 kHz

deviation) , Dynamic Range > 110dB , on/off switch operating range 100 mtrs , RF Power Output High:

mW, Low: 10 mW (switchable) at 50 Ω , Multiple band with minumum 20 Microphone channels on band ;

maximum Output level XLR / Balanced: +9 dBV & 6.3 mm (¼"") / Unbalanced: +4 dBV. Power Supply 2 AA

412 batteries. 4 Nos 68680 ₹

SITC of Corded Vocal Microphone with Dynamic Neodymium Magnet microphone element,with frequency

response 80Hz-16kHz,Super-Cardioid polar pattern,sensitivity of 2.2mV/Pa and output impedance

SITC of Corded Instrument Microphone with Self Biased condenser microphone element ,with frequency

response of 55Hz-16kHz ,Cardioid polar pattern,sensitivity of 5.5mV/Pa ,rated impedance of 200 ohm

414 ,maximum spl :132dB SPL and dynamic range ;107dB. 2 Nos 14660.15 ₹

SITC of Condenser Cardioid 18" Goose neck Microphone for Podium with back electret,with frequency

response100 Hz to 15,000 Hz, Cardioid polar pattern,sensitivity of 4.5 mV/Pa and output impedance

Supply,Installation,Testing and Commissioning of 4x4 4K60 4:4:4 HDR AV Switcher Should have

minimum 4xHDMI inputs and 1xHDMI outputs; Should support input signals up to HDR10, HDR10+, Dolby

Vision, Deep Color, 4K60 4:4:4 or better; Should support output signals up to HDR10, HDR10+, Dolby

Vision, Deep Color, and 4K60 4:4:4 or better; Should handles resolutions Up to 4096x2160@60Hz (DCI

4K60), 4:4:4 Video; Should be HDCP 2.3 compliant or better; Should have minimum 1xaudio de-embedding

Port or better; Should provide 2-channel Stereo Audio output; Should support the audio formats like

Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24,

DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels; Should support 100/1000 Mbps,

auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP; Should support Web browser

setup and control; Should support automatic switching of inputs; Should have front Panel control for

manual Switching; Should have compatibility with control systems of the same OEM; Should support

416 IEEE 802.1X, Secure CIP, Authentication, SSH/SSL, TLS; Should have. 1 Nos 198768 ₹

Supply,Installation,Testing and Commissioning of HDBaseT Extender w/Analog Audio Should be a

HDBaseT® Certified 4K Ultra HD signal extender with transmiter and receiver included Should extend

uncompressed digital video, audio, and control signals over a single CAT type twisted pair cable Should

support cable lengths up to 330 ft (100 m) for all resolutions up to 4K and Ultra HD using CAT7a shielded

twisted pair (S/FTP) cable. Should support cable lengths up to 330 ft (100 m) for 1080p, WUXGA, and 2K

using CAT5e twisted pair (S/FTP) cable. Should support cable lengths up to 230 ft (70 m) for 4K and UHD

using CAT5e twisted pair (S/FTP) cable. Should support extensions of audio formats like Dolby Digital®,

Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD

Master Audio™, LPCM up to 8 channels. Should also extend external stereo analog audio signal via

Unbalanced stereo line-level audio input using 3.5mm TRS mini phone jack connector Compatible with

HDMI®, DVI, and DisplayPort Multimode sources [3] Compatible with HDMI and DVI display devices [3]

417 Supports Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM. 6 Nos 123624 ₹

Providing, fixing, integrating, testing and commissioning (DSITC) of a complete professional large-format

display system—single lump-sum item—comprising indoor LED video wall, laser projector(s) with

screen(s), video processing/distribution, control, racks-power-UPS, certified cabling and mounting

structure, fully turnkey and handed over complete: LED wall with SMD panels, pixel pitch P2.5–P3.9 (as

approved), brightness ≥800 nits (calibrated), refresh ≥3840 Hz, grayscale ≥14-bit, contrast ≥5000:1, wide

viewing angle, front-service die-cast cabinets with seamless alignment (flatness ≤0.1 mm), ingress

≥IP50 (front), avg. power ≤180 W/m², factory & site calibration with pixel mapping, data loop redundancy,

spares ≥2% (modules/PSUs/receiving cards); professional LED processor/scaler 4K60 4:4:4 with HDMI

2.0/DP 1.2/DVI/SDI inputs, EDID/HDCP 2.2, PIP/POP, web GUI, third-party control API; laser projector(s)

8k/12k/20k ANSI lumens (as required), native WUXGA or true 4K, motorized zoom/focus, lens shift,

geometric correction/edge-blend, 24×7 capable, HDMI 2.0/HDBaseT/SDI; projection screen(s) fixed or

motorized tab-tensioned, gain 1.1–1.4 or ALR ≥0.8, viewing angle ≥160°, quiet motor ≤50 dB, dry-

contact/RS-485; signal distribution via HDBaseT Cat6A (4K60 4:4:4) or SDVoE/AVoIP 10 GbE with

managed switch, EDID/HDCP management; micro-adjustable steel/aluminum sub-frame (X/Y/Z) with

chemical anchors, powder-coated, access panels; certified HDMI active/optical, Cat6A F/UTP, OM4 fiber

as applicable; FR-LSZH power cabling, dedicated earthing, SPD at DB, MCB/ELCB, PF ≥0.95; centralized

control processor with touch panel/keypads, scenes, scheduler, monitoring/logs, TCP/IP/RS-232/RS-

485/BMS integration; 19″ AV racks with cooling, PDUs, online UPS ≥15 minutes backup for

processors/control; environmental 0–40 °C, RH 10–80% non-condensing, LED MTBF ≥100,000 h;

compliance: IEC 62368-1, CISPR 32/35, RoHS, IS/IEC wiring rules, UL/CE as applicable; deliverables

include design/shop drawings (loads, cable schedules, rack layouts),

installation/configuration/calibration, FAT/SAT (LED latency ≤2 frames in low-latency mode; projector

brightness within −10% of rated at center; screen flatness OK), as-builts, programming files, licenses,

admin credentials, O&M manuals, and operator training (min. 2×2 hrs); warranty 3 years on-site for LED

418 modules/cabinets/PSUs/receiving/sending cards/processors/projectors 17 SQmt 278618.6 ₹

ITC, LED display 55 inch Business TV (16X7 Operation

hour),Crystal processor 4K,PurColor,Resolution 3840 x

2160(UHD-4K),Brightness 250 nit, Contrast ratio

4700:1,HDR10+,WiFi, Bluetooth, HDMI(3), HDCP1.4/2.2,

USB(1), RJ45,Web browser,Youtube,3 Side Bezel Less, VXT

419 Player, Samsung business TV. 4 Nos 57570 ₹

SITC of WUXGA laser projector. HDR Supported. Support up to 4K/UHD. Brightness : 8000 - 9000 ISO

Lumens or better, Dynamic Contrast Ratio - 10000:1 or better, Screen Size Support: 40-400ich Resolution

- 1920 × 1200 or better, Accoustic Noise 40dB or lower. Lens Shift : ±100%V X ±30%H, warping and

blending Power consumption- 500 to700 W ,Signal input: HDMI x1,1x Audio 3.5mm. Output port: 1xHDMI

420 2.0, 1x Audio 3.5mm. Laser lifer :20000hrs. Should be suppled with projector mounting kit. 3 Nos 656500 ₹

SITC of 135" Diagonal motorised Projector screen with LVC,16:10 format ratio, Image area fully framed

421 with black, with mounting bracket as per site requirement.the motor is sync motor with RF remote. 4 Nos 157459 ₹

SITC of 180" Diagonal Motorised Projector screen with LVC,16:10 format ratio, Image area fully framed

422 with black, with mounting bracket as per site requirement.the motor is sync motor with RF remote. 1 Nos 181800 ₹

423 Hanging Brackets for Projector 3 Nos 9595 ₹

SITC of 8" touch panel room automation Controller. The control panel includes an 8” capacitive touch

high contrast LCD for function selection. Should be able to control 20 IP devices. The control panel is

made from PVC/ABS material with UV protection additive. The control panel includes sensors that detect

ambient light levels and adjust display brightness automatically. The control panel includes an integrated

controller capable of controlling up to 20 IP-based devices, and such operation shall be externally

programmable. The control is be powered by PoE (IEEE 802.3at Class 3, 15W). The control panel is CE

424 marked, UL listed, and compliant with the RoHS directive. 2 Nos 460560 ₹

SITC of 2 Core 1.5 Sqmm speaker cable, ATC Copper conductor, PVC insulated, Cores twisted in circular

425 form, Jacketed with PVC. 1000 Mtr 126.25 ₹

SITC of 2 Core 4 Sqmm speaker cable, ATC Copper conductor, PVC insulated, Cores twisted in circular

426 form, Jacketed with PVC. 150 mtr 186.85 ₹

427 SITC of 2 Core 24 AWG Microphon cable,PVC insulated, Cores twisted in circular form, Jacketed with PVC 350 mtr 141.4 ₹

SITC of For all electronic products inter connections with all gold platted terminals inside rack as well as

428 out side. 2 Lot 35350 ₹

CAT6A U/FTP Video & LAN Bulk Cable — Low Smoke & Halogen Free, 4 shielded twisted pairs (U/FTP) of

429 23AWG solid copper conductors are cabled together in an unshielded outer jacket. 350 Mtr 108.07 ₹

Industrial 32 U Rack to incorporate all electronics with built in cooling fans, spike buster electrical

430 proper connector, cable tray for proper cable laying. 1 Nos 62424.07 ₹

Various size form 1.5 meter to 10 meter 3.0 version 18 GBPS Speed cables hdami & USB Cables as per

431 site require. 2 Lot 32712.89 ₹

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Volume air cooled

Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll

Compressor(s), microprocessor based Controller, top discharge type condensing unit(s), with R410 A

Refrigerant (Or Eco Friendly Green Gas if any), vibration isolators, with suitable foundation, MS Stand for

Unit with necessary paint etc. complete as required. The unit shall deliver the rated capacity at AHRI

Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to

work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the

refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER

not less than 6.5. (Design should be got approval before execution from engineer in charge) - Consider

Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow

as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ±

10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature fresh air provision compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow

as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ±

10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature fresh air provision compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow

as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ±

10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature fresh air provision compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow

as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ±

10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature fresh air provision compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow

as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ±

10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature fresh air provision compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow

as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ±

10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature fresh air provision compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow

as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ±

10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit

shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature fresh air provision compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum capacity VRV High wall type Indoor

unit equipped with washable synthetic media pre-filter, fan section with noise level maximum 60 dB

@min 400 cfm /dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories

etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit

shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

Supply, installation, testing and commissioning of following minimum capacity VRV High wall type Indoor

unit equipped with washable synthetic media pre-filter, fan section with noise level maximum 60 dB

@min 400 cfm /dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories

etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit

shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

Supply, installation, testing and commissioning of following minimum capacity and external static

pressure VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-

filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX

copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain

pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz

complete as required. The unit shall have automatic force shut down provision in case of fire on

receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of

Degree C DB and 19 Degree C WB temperature.

High Static Ductable units (minimum 110 pascal external static pressure)

Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing

unit with variable speed fan motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for (

cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with

necessary core cutting.

(1)For 3 Star Rating of current year

443 (B) for 1.5 ton capacity 3 Nos. 40204.06 ₹

NOTE:- 1)The Copper Piping & Piping Circuit should be with Minimum Number of joints, which shall be

attained by : (1) Using One End Expanded Tubes

(2) Bending the tubes instead of using elbow joints wherever 90 degree bending is required.

(3) Piping should be routed at site in such a manner, that brazed joints in the refrigeration piping are

kept to a minimum.

(4) The makes of tube fittings shall be same as that of tubes.

(5) The thickness of fittings used shall be same as that of the pipe.

Copper Piping : Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen

testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete

with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber

tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all

accessories as per specifications etc with necessary refrigerant joint as required :

444 (A) 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation 100 Mtr. 232.3 ₹

445 (B) 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation 80 Mtr. 317.14 ₹

446 (C.) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation 100 Mtr. 437.33 ₹

447 (D) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation 120 Mtr. 566.61 ₹

448 (E) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 50 Mtr. 668.62 ₹

449 (F) 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 60 Mtr. 822.14 ₹

450 (G) 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 60 Mtr. 968.59 ₹

451 (H) 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 30 Mtr. 1028.18 ₹

452 (I) 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation 25 Mtr. 1079.69 ₹

453 (J) 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation 20 Mtr. 1139.28 ₹

454 (K) 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation 20 Mtr. 1173.62 ₹

455 (L) 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation 30 Mtr. 1242.3 ₹

Control Cables and Wires : Supply installation testing commissioning Shielded Shielded Control Cables

for VRV System with necessary ISI mark Medium class rigid PVC pipes with necessary accessories with

456 termination in machine and control equipments..(A) 2C X 1.5 Sq mm Shielded Armoured 1500 Mtr. 121.2 ₹

457 (B) 3C X 1.5 Sq mm Shielded Armoured 220 Mtr. 129.28 ₹

458 (C) 4C X 1.5 Sq mm Shielded Armoured 180 Mtr. 171.7 ₹

Central Control System

Central Remote Controller for above system comprising of all required Software. PC will be supplied by

client. System should control & monitor all installed IDU / ODU. Following should be minimum

controlling & monitoring features that system should cover; Start / Stop, Temperature settings, Mode

control, Group formation, view alarms, Fault Diagnosis.

459 (B) Central wired Remote Control System 550 HP 1414 ₹

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation.

providing and erecting Highly flexible, fibre free insulation laminated with an embossed silver-colour foil

for enhanced aesthetic and mechanical protection. The closed cell insulation material with superior

performance in fire safety and maintenance is used for the protection of HVAC ducts, especially in the

clean room conditions of pharmaceuticals industries.

• Pre-covered insulation with excellent aesthetics

• Low Thermal Conductivity, λ0°C ≤ 0.035 W/(m·K)

• Excellent Water vapour Diffusion Resistance, µ ≥

• Easy to clean and maintain

• Class 0 fire classification to BS 476 part 6 &

465 • Durable and high resistance to mechanical abuse 1300 Sq.Mtr 587.82 ₹

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal

rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,

hangers, supports etc. as per approved drawings and specifications of following sheet thickness

complete as required.

466 (A) Thickness 0.63 mm sheet (22 Gauge) 499.2788 Sq.Mtr. 1122.11 ₹

467 (B) Thickness 0.80 mm sheet (20 Gauge) 500 Sq.Mtr. 1301.89 ₹

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal

rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,

hangers, supports etc. as per approved drawings and specifications of following sheet thickness

complete as required

468 (A) Thickness 0.63 mm sheet (22 Gauge) 650 Sq.Mtr. 1079.69 ₹

469 (B) Thickness 0.80 mm sheet (20 Gauge) 500 Sq.Mtr. 1258.46 ₹

Supply, installation, testing and commissioning of GI volume control duct damper complete with

470 neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. 15 Sq.Mtr. 7156.86 ₹

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume

control dampers complete as per specifications and size & shape as per site requirement and approved

471 design. 40 Sq.Mtr. 8834.47 ₹

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without

volume control dampers complete as per specifications and size & shape as per site requirement and

472 approved design. 40 Sq.Mtr. 6035.76 ₹

Supplying, fixing testing commissioning of supply air diffuser of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core and size & shape as per

473 site requirement and approved design. 45 Sq.Mtr. 11548.34 ₹

Supplying, fixing testing commissioning of Return air diffuser of powder coated aluminium without

volume control dampers with anti smudge ring & removable core and size & shape as per site

474 requirement and approved design. 35 Sq.Mtr. 7969.91 ₹

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass

wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to

centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed

to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as

475 required and as per specifications. 40 Sq.Mtr. 702.96 ₹

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed

cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile

rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape

insulation complete as per specifications and as required.

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and

return air path as and where required of required sizes i/c control wiring,the damper shall be motorized

and spring return so as to close the damper in the event of power failure automatically and open the

same in case of power being restored. The spring return action shall be inbuilt mechanism and

not externally mounted. The damper shall also be closed in the event of fire signal complete as

required and as per specifications.

477 (A) Fire damper 30 Sq.Mtr. 10161.61 ₹

478 (B) Actuator 10 Nos. 9528.34 ₹

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty having following dia size and maximum speed in

479 [A] 305 mm dia 900 RPM Cat.II 20 Nos. 2054.34 ₹

481 [D] 450 mm dia 900 RPM Cat.II 20 Nos. 3339.06 ₹

Ductless Basement Ventilation System

SITC of CEILING MOUNTED JET FAN

Supply, installing, testing and commissioning of Ductless Ventilation / Jet fans as per attached

specifications for normal ventilation and Smoke Extraction along with silencers on both sides with min

710 mm length. Jet fan to be of complete height of 430 mm including 315 mm impeller dia and having

thrust of 30N. The fan shall be suitable for 300 °C for 2 Hrs operations as per EN 12101-3. Each fan shall

be complete with dual speed motor and aerodynamical adjustable pitch die cast aluminium impeller.

Casing shall be made of Hot dipped Galvanized steel. The Motor shall be run on the electrical power

suitable for 415V / 3Ph / 50Hz. Note : Final quantity of Jet fans shall be decided after CFD analysis. All

482 other fan mounting / ceiling suspending accesories will be provide with the 20 Nos. 40400 ₹

SITC of FIRE RATED TUBE AXIAL FAN WITH MOTOR FOR EXHAUST AIR

Supply, installation, testing and commissioning of TUBE Axial fans complete with Hot dipped Galvanised

Steel Casing, adjustable pitch die cast aluminium impeller (Hub and blades), motors & spun flanges on

both ends. Casing position shall be as per the job requirement and shall be marked on the fan assembly.

The Fan assembly along with motors should be tested for Temperature range: 300 °C / 2 Hours for

Smoke Evacuation as per EN 12101-3. Fan inlet & outlet side fire rated canvass connections & non return

dampers to be required. All other fan mounting / ceiling suspending accesories will be provide with the

Supply, installing, testing and commissioning of Tube Axial Fans (for normal mode + Fire mode )

SITC of FIRE RATED TUBE AXIAL FAN WITH MOTOR FOR EXHAUST AIR

Supply, installation, testing and commissioning of TUBE Axial fans complete with Hot dipped Galvanised

Steel Casing, adjustable pitch die cast aluminium impeller (Hub and blades), motors & spun flanges on

both ends. Casing position shall be as per the job requirement and shall be marked on the fan assembly.

The Fan assembly along with motors should be tested for Temperature range: 300 °C / 2 Hours for

Smoke Evacuation as per EN 12101-3. Fan inlet & outlet side fire rated canvass connections & non return

dampers to be required. All other fan mounting / ceiling suspending accesories will be provide with the

Supply, installing, testing and commissioning of Tube Axial Fans (for normal mode + Fire mode )

SITC of FIRE RATED TUBE AXIAL FAN WITH MOTOR FOR FRESH AIR

Supply, installation, testing and commissioning of Axial fans complete with Hot dipped Galvanised Steel

Casing, adjustable pitch die cast aluminium impeller (Hub and blades), motors & spun flanges on both

ends. Casing position shall be as per the job requirement and shall be marked on the fan assembly. Fan

inlet & outlet side canvass connections with non return dampers to be required. All other fan mounting /

ceiling suspending accesories will be provide with the fan.

COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSIS FOR CO SIMULATION

Computational fluid dynamics, usually abbreviated as CFD, Computers are used to perform the

calculations required to simulate the

interaction of liquids and gases with surfaces defined by boundary conditions.

The analysis is carried out for studying the air movement and CO concentration analysis during normal

1.To decide and optimize the location and number of the fans.

2.To simulate the air flow and CO concentration and smoke simulation.

486 3.To predict the performance of the system for various possible situations. 2 Each 50500 ₹

Supply, Installtion, Testing and Commissioning of CO (Carbon Monoxide) DETECTORS

CO Detectors Quantitiy and Location As per CFD Analysis carry out for studying the air movement and

487 CO concentration analysis during normal operation. 14 Each 24240 ₹

CONTROL WIRE & CABLES

Supply & laying of FRLS type Armoured Cabling work for Jet Fans, Tube Axial Fans & CO Sensors.

488 For Jet Fans (7 Core, 2.5 Sq. mm.) 250 Mtr. 646.4 ₹

CONTROL WIRE & CABLES

Supply & laying of FRLS type Armoured Cabling work for Jet Fans, Tube Axial Fans & CO Sensors.

489 For Tube Axail Fans (4 Core, 10.0 Sq. mm.) 200 Mtr. 212.1 ₹

CONTROL WIRE & CABLES

Supply & laying of FRLS type Armoured Cabling work for Jet Fans, Tube Axial Fans & CO Sensors.

490 For CO Sensors (2 Core, 1.0 Sq. mm.) 275 Mtr. 181.8 ₹

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/

491 Transformer LT panel board, Motors etc. using proper clamp. 700 Kg. 77.77 ₹

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray

should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot

dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erection with necessary support( included) as per

Specification and as per instruction of engineer in charge..

Supply & Installation of Exhaust and Fresh air louvers.

An adjustable extruded Aluminium drainable louver, These louvers are manufactured to facilitate air