Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-Finance | ₹1.9 L | L1 | Accepted-Finance L1 BIDDER
LOWEST BID |
| 2 | L2₹1.9 LRejected-Finance | ₹1.9 L | L2 | Rejected-Finance HIGHER BID |
| 3 | L3₹1.9 LRejected-Finance RABINDRA NAGAR SILIGURI 734 006 | SILIGURI | DARJEELING | WEST BENGAL | 734006 | ₹1.9 L | L3 | Rejected-Finance HIGHER BID |
| 4 | L4₹2.2 LRejected-Finance | ₹2.2 L | L4 | Rejected-Finance HIGHER BID |
| Sl No | Description | Qty | Unit | RAJESH ENTERPRISE L2 | M/S AVIJIT DAS L1 | MAA ENTERPRISES L3 | ananda enterprises L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | SITC of LED illumination sign board fabricated by ACP box supported with 1"x1" MS hollow square pipe of 18swg all around. The 3mm ACP facial should be provided with Laser cutting 6mm thick acrylic letter out of which 3 mm rising from the surface of the ACP board. 6mm letters should be fixed on another 3 mm acrylic sheet on back side of the ACP facial. Border line of the front portion and back portion should be coverd by 1.5" aluminium channel as per the direction of EIC . The Sign board should be glow from back side of letters by 1.5W/2.0 LED 2 /3/4 module cool white in colour inculding 12 Volt 615W power supply and LED must be covered in box made of 3 mm thick sun board 4" with part of the four side of board should be covered by ACP after bending excess part from front side . The sign board should be fixed on roof of the building with suitable supporting arrangement on floor through angle iron frame of adequate dimention as necessary for mechanical strength to hold the structure & inclusive penting and mending good damages as per direction of EIC. Colour of APC & letter will be as per direction of EIC.
The cost transpotation and scafolding charges are included .
( 12 ft x 6 ft x6" One no.) | 72 | Sqft | 2,630 ₹1.9 L | 2,620 ₹1.9 L | 2,640 ₹1.9 L | 2,940 ₹2.1 L |
| 2.00 | S/F GI water proof looping cable box of size 200x150x100mm having hinged top Cover with rubber gasket lining, railway type mechanical locking anangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same after cuuting wall and mending damages. | 1 | Set | 638 ₹638 | 630 ₹630 | 645 ₹645 | 699 ₹699 |
| 3.00 | Supply of 2 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Polycab / RR Kabel/Gloster/KEI/Havells as approved by E.I.C] | - | - | - | - | - | - |
| 3.01 | 2 Core 6 sqmm | 10 | RM | 180 ₹1,800 | 175 ₹1,750 | 188 ₹1,880 | 192 ₹1,920 |
| 4.00 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F
MS saddles with earthing attachment in 10 SWG GI (Hot Dip)
Wire, making holes etc. as necy. mending good damages and
painting | 10 | RM | 75 ₹750 | 70 ₹700 | 77 ₹770 | 98 ₹980 |
| 5.00 | Supplying and fixing compression type gland and finishing the ends of following XLPE / PVC armoured AL. cable (2/4 / 3.5) Core as per GS. | - | - | - | - | - | - |
| 5.01 | 2 Core 6 Sq. mm | 2 | Nos | 146 ₹292 | 144 ₹288 | 150 ₹300 | 172 ₹344 |
| 6.00 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. | - | - | - | - | - | - |
| 6.01 | 2 core 6 sqmm cable | 2 | Set | 43 ₹86 | 40 ₹80 | 46 ₹92 | 59 ₹118 |
Tender Value
₹1.9 L
EMD Value
₹3,846
Closing Date
22 May 2026, 1:00 pmClosed
AE,SESD-I,PWD
OFFICE OF THE AE,SESD-I,PWD KACHARI ROAD, OPP. PWD INSPECTION BUNGALOW, SILIGURI PIN 734001
WBPWD/AE/SESD-I/e-NIQ-02 of 2026-27
2026_WBPWD_5013884_1
WBPWD/AE/SESD-I/e-NIQ-02 of 2026-27
Open Tender
ELECTRICAL WORKS ORG
15 days
SILIGURI
Please refer Tender documents.
4 documents required · 4 mandatory
₹3,846
5 Jun 2026
11 May 2026
25 May 2026
11 May 2026
22 May 2026
11 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | SITC of LED illumination sign board fabricated by ACP box supported with 1"x1" MS hollow square pipe of 18swg all around. The 3mm ACP facial should be provided with Laser cutting 6mm thick acrylic letter out of which 3 mm rising from the surface of the ACP board. 6mm letters should be fixed on another 3 mm acrylic sheet on back side of the ACP facial. Border line of the front portion and back portion should be coverd by 1.5" aluminium channel as per the direction of EIC . The Sign board should be glow from back side of letters by 1.5W/2.0 LED 2 /3/4 module cool white in colour inculding 12 Volt 615W power supply and LED must be covered in box made of 3 mm thick sun board 4" with part of the four side of board should be covered by ACP after bending excess part from front side . The sign board should be fixed on roof of the building with suitable supporting arrangement on floor through angle iron frame of adequate dimention as necessary for mechanical strength to hold the structure & inclusive penting and mending good damages as per direction of EIC. Colour of APC & letter will be as per direction of EIC.
The cost transpotation and scafolding charges are included .
( 12 ft x 6 ft x6" One no.) | 72 | Sqft | 101 | ₹7,272 |
| 2 | S/F GI water proof looping cable box of size 200x150x100mm having hinged top Cover with rubber gasket lining, railway type mechanical locking anangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same after cuuting wall and mending damages. | 1 | Set | 102 | ₹102 |
| 3 | Supply of 2 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Polycab / RR Kabel/Gloster/KEI/Havells as approved by E.I.C] | - | - | 106 | - |
| 3.01 | 2 Core 6 sqmm | 10 | RM | 107 | ₹1,070 |
| 4 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F
MS saddles with earthing attachment in 10 SWG GI (Hot Dip)
Wire, making holes etc. as necy. mending good damages and
painting | - | RM | 108 | - |
| 5 | Supplying and fixing compression type gland and finishing the ends of following XLPE / PVC armoured AL. cable (2/4 / 3.5) Core as per GS. | - | - | 109 | - |
| 5.01 | 2 Core 6 Sq. mm | 2 | Nos | 110 | ₹220 |
| 6 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. | - | - | 111 | - |
| 6.01 | 2 core 6 sqmm cable | - | Set | 112 | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.21 MB
Tendernotice_2.pdf
PDF • 0.51 MB
BOQ_5081752.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid