C/o New District Treasury Office Building at Nahan

Amount

Providing 25(twenty five) mm thick wooden planking longued and grooved,in flooring fixing to wooden base frame with iron screws complete (base wooden frame to be paid separately) including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing PVC peneling approved quality in ceiling with tongued and grooved jointing and screws (frame work and cover fillets to be measured paid for separatly) including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing plain square edged cover fillets (beading) 50mmx12(fifty into twelve)mm section, with wood screws in ceiling and lining including mitring at junction. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres. lead. In cement mortar including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (one Cement is to six Sand) Second Class Bricks including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing concrete for plain/reinforced concrete as per drawing & technical specifications clause 802, 803, 1202 & 1203 P.C.C. grade M 20( Mix design 20 ) Nominal mix 1:2:4(one cement is to two sand is to four graded stone aggregate) including curing & shuttering complete as per HP.PWD., specification 1990 of Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and Laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 P.C.C nominal mix 1:4:8 (one cement is to four sand is to eight graded stone forty mm aggregate) including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level : Tor Steel including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting.including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

P/F C.P. brass waste for wash basin or sink 32mm ( thirty two milimetre ) dia as per HP.PWD., specification 1990 Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

P/F C.P. brass Chain 50(fifty)mm long & rubber plug of following size for sink or wash basin 32mm ( thirty two milimetre ) dia as per HP.PWD., specification 1990 Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing brass bib tap long body ( superior or heavy type ) 15mm dia ( fifteen milimetre ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. stop cock 15mm dia ( fifteen milimetre ) dia as as per HP.PWD., specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes ( Medium grade ) tube fitting and clamps including making good the wall, ceiling & floor 15 mm ( Fifteen milimetre ) nominal bore as per HP.PWD., Specification volume-I ( one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Repairs to plaster in patches of 2.50(two point five zero) Sqm. and under and 10(ten) to 15(fifteen)mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within all Lead including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.harge.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface including necessary repairs to scratches complete.. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreig matters sand papered smooth to give final matter finish to the surface complete. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Applying priming coat on wall cement primer including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass gate angle valve 25mm ( twenty five milimetre dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass float valve 15mm ( fifteen milimetre dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and fixing 19mm (nineteen millimetre) thick water proof termite resistant commercial board for shutter of cup board of the shelves shall be finished with 6mm ( six millimetre) thick hard wood edging the shutter of cup board from all sides shall also be finished with 6mm/12mm ( six /twelve millimetre) thick hard wood edging. All visible edges of commercial board to be finished with 6m ( six millimetre) thick hard wood edging including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in grating framed guards, bars, ladders,railing,brackets & similar works. as per specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing 40mm ( forty milimetre ) thick second class deodar wood work for wire gauge shutters using galvanised mild steel wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm ( Zero point five six milimetre ) for doors,windows & clerestory windows including bright finished black enamelled iron hinges with necessary screws as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing panelled glazed or panelled and glazed shutter for doors windows and clerestory windows including black enamelled iron but hinges with necessary screws.40mm ( forty milimetre ) thick second class kail wood including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing aluminium tower bolts ( Barrel type ) with necessary screws etc. complete 250 x 10mm ( Two hundred fifty into ten milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing aluminium handles with the necessary screws etc. complete 125mm ( One hundred twenty five milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters :-- Enamel paint other than white including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

MANOJ TRADING AND ENGINEERING WORKS

Sanjeev Sharma

Layak Ram

AQIB KHAN