CPPP

Active

Works

Civil Works

M/O boundary wall in DDA vacant land under NA-II.

Delhi Development Authority

NARELA | North Delhi, Delhi

Amount: ₹71.2 LCloses: 14 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published8 Oct 2026
Closes14 Oct 2026
Bid Opening15 Oct 2026

Tender Value

₹71.2 L

EMD Value

₹1.4 L

Closing Date

14 Oct 2026, 3:00 pm5d left

Tender Inviting Organisation

Name

EE,NPD-4,DDA

Address

EE,NPD-4,DDA

Work Description

Hiring of equipment, manpower and transport etc. for demolition programme in Narela Zone.

Tender Information

Tender ID

2026_DDA_929132_1

Reference Number

40/EE/NPD-4/DDA/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

365 days

Location

NARELA

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical

Requiredi) Scanned copy of Proof of registration in Contractors Registration Board (CRB) of DDA/Valid enlist (.pdf)

Requiredii) Scanned copy of proof of depositing E-Tender processing fee to CRB/DDA. (.pdf)

Requirediii) Scanned copy of Tender Acceptance Letter ( Mandatory to be given on companys letter head). (.pdf)

Requirediv) Scanned copy of the GST Registration Certificate and acknowledgment of the latest filed GSTR-3B (.pdf)

Requiredv) Copy of certificate of registration with EPFO and ESIC. (.pdf)

Requiredvi) Scanned copy of unique transaction reference on IFMIS Portal of Earnest Money Rs. 1,42,448/- (.pdf)

Requiredvii) Scanned copy of an undertaking on a non-judicial stamp paper of 100/- stating that the agency (.pdf)

Requiredviii) In case of Partnership firm, General Power of Attorney in favour of person who is authorized t (.pdf)

Requiredix) Copy of cancelled Cheque / bank Account Details for refund of Earnest Money Deposit. (.pdf)

Finance

RequiredSchedule of price bid in the form of BoQ_XXXXX.xls (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹1.4 L

Important Dates

Last Activity

8 Oct 2026

Published

8 Oct 2026

Bid Opening

15 Oct 2026

Download Starts

8 Oct 2026

Download Ends

14 Oct 2026

Submission Starts

8 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (20 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Hiring and running of tractor with trolley complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme failed/could not be carried out due to any reason at site. Note: Tractor should be make of Mahindra or Swaraj or Sonalika with minimum 45HP capacity or equivalent to this.	120	Per day	1,920.6	₹2,30,472
1.1	Hiring and running of tractor with trolley complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme carried out successfully. Note: Tractor should be make of Mahindra or Swaraj or Sonalika with minimum 45HP capacity or equivalent to this..	20	Per day	960.3	₹19,206
2	Hiring and running of 6T Diesel Truck to site capacity or equivalent complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme failed/could not be carried out due to any reason at site. Note: 6T Diesel truck should be make of Tata or Ashok Leyland or BharatBenz with 6Ton payload capacity or equivalent to this.	60	Per day	4,637.8	₹2,78,268
2.1	Hiring and running of 6T Diesel Truck to site capacity or equivalent complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme carried out successfully. Note: 6T Diesel truck should be make of Tata or Ashok Leyland or BharatBenzwith 6Ton payload capacity or equivalent to this.	10	Per day	3,200.95	₹32,009.5
3	Hiring and running of Hydraulic excavator (30T) with operator and fuel complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme failed/could not be carried out due to any reason at site. Note: Hydraulic excavator should be make of JCB or Tata Hitachi or Komatsu having 30 Ton operating weight or equivalent to this.	150	Per day	11,167.7	₹16,75,155
3.1	Hiring and running of Hydraulic excavator (30T) with operator and fuel complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme carried out successfully. Note: Hydraulic excavator should be make of JCB or Tata Hitachi or Komatsu having 30 Ton operating weight or equivalent to this.	20	Per day	5,583.85	₹1,11,677
4	Hiring and running of Hydraulic cutter/Hammer with air compressor and operator complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme failed/could not be carried out due to any reason at site. Note: Hydraulic cutter/hammer should be make of Epiroc or Atlas Copco or Furukawa having following specifications - 1. Hydraulic Breaker/Hammer: Heavy-duty hydraulic breaker suitable for demolition of RCC/PCC, masonry and other structural elements. 2. Operating Weight of Breaker: Minimum 500 kg. 3. Carrier/Excavator Compatibility: Suitable for hydraulic excavator of approximately 20–30 tonne operating weight. 4. Impact Energy: Minimum 1,000 Joules per blow or equivalent manufacturer-rated performance. 5. Operating Pressure: Suitable for the hydraulic system of the carrier, generally 150–200 bar or as recommended by the manufacturer. 6. Hydraulic Flow: Approximately 80–150 LPM, or as required for proper operation of the proposed breaker and carrier.	30	Per day	6,625.2	₹1,98,756
4.1	Hiring and running of Hydraulic cutter/Hammer with air compressor and operator complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme carried out successfully. Note: Hydraulic cutter/hammer should be make of Epiroc or Atlas Copco or Furukawa having following specifications - 1. Hydraulic Breaker/Hammer: Heavy-duty hydraulic breaker suitable for demolition of RCC/PCC, masonry and other structural elements. 2. Operating Weight of Breaker: Minimum 500 kg. 3. Carrier/Excavator Compatibility: Suitable for hydraulic excavator of approximately 20–30 tonne operating weight. 4. Impact Energy: Minimum 1,000 Joules per blow or equivalent manufacturer-rated performance. 5. Operating Pressure: Suitable for the hydraulic system of the carrier, generally 150–200 bar or as recommended by the manufacturer. 6. Hydraulic Flow: Approximately 80–150 LPM, or as required for proper operation of the proposed breaker and carrier.	10	Per day	3,922.2	₹39,222
5	Hiring and running of Gas cutter/Hammer with air compressor and operator complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme failed/could not be carried out due to any reason at site. Note: Gas cutter/hammer should be make of Esab or Messer or Hypertherm having Industrial oxy- fuel cutting set, complete with oxygen/fuel gas cylinders, regulators, hoses and cutting torch.	30	Per day	3,730.15	₹1,11,904.5
5.1	Hiring and running of Gas cutter/Hammer with air compressor and operator complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme carried out successfully. Note: Gas cutter/hammer should be make of Esab or Messer or Hypertherm having Industrial oxy- fuel cutting set, complete with oxygen/fuel gas cylinders, regulators, hoses and cutting torch..	10	Per day	2,061.75	₹20,617.5

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.09 MB

Work Item Documents

BOQ_976393.xls

BOQ • 0.31 MB

NIT40.pdf

Tender Documents • 2.77 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Hiring and running of tractor with trolley complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme failed/could not be carried out due to any reason at site. Note: Tractor should be make of Mahindra or Swaraj or Sonalika with minimum 45HP capacity or equivalent to this.

120

Per day

1,920.6

₹2,30,472

1.1

Hiring and running of tractor with trolley complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme carried out successfully. Note: Tractor should be make of Mahindra or Swaraj or Sonalika with minimum 45HP capacity or equivalent to this..

Per day

960.3

₹19,206

Hiring and running of 6T Diesel Truck to site capacity or equivalent complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme failed/could not be carried out due to any reason at site. Note: 6T Diesel truck should be make of Tata or Ashok Leyland or BharatBenz with 6Ton payload capacity or equivalent to this.

Per day

4,637.8

₹2,78,268

2.1

Hiring and running of 6T Diesel Truck to site capacity or equivalent complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme carried out successfully. Note: 6T Diesel truck should be make of Tata or Ashok Leyland or BharatBenzwith 6Ton payload capacity or equivalent to this.

Per day

3,200.95

₹32,009.5

Hiring and running of Hydraulic excavator (30T) with operator and fuel complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme failed/could not be carried out due to any reason at site. Note: Hydraulic excavator should be make of JCB or Tata Hitachi or Komatsu having 30 Ton operating weight or equivalent to this.

150

Per day

11,167.7

₹16,75,155

3.1

Hiring and running of Hydraulic excavator (30T) with operator and fuel complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme carried out successfully. Note: Hydraulic excavator should be make of JCB or Tata Hitachi or Komatsu having 30 Ton operating weight or equivalent to this.

Per day

5,583.85

₹1,11,677

Hiring and running of Hydraulic cutter/Hammer with air compressor and operator complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme failed/could not be carried out due to any reason at site. Note: Hydraulic cutter/hammer should be make of Epiroc or Atlas Copco or Furukawa having following specifications - 1. Hydraulic Breaker/Hammer: Heavy-duty hydraulic breaker suitable for demolition of RCC/PCC, masonry and other structural elements. 2. Operating Weight of Breaker: Minimum 500 kg. 3. Carrier/Excavator Compatibility: Suitable for hydraulic excavator of approximately 20–30 tonne operating weight. 4. Impact Energy: Minimum 1,000 Joules per blow or equivalent manufacturer-rated performance. 5. Operating Pressure: Suitable for the hydraulic system of the carrier, generally 150–200 bar or as recommended by the manufacturer. 6. Hydraulic Flow: Approximately 80–150 LPM, or as required for proper operation of the proposed breaker and carrier.

Per day

6,625.2

₹1,98,756

4.1

Hiring and running of Hydraulic cutter/Hammer with air compressor and operator complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme carried out successfully. Note: Hydraulic cutter/hammer should be make of Epiroc or Atlas Copco or Furukawa having following specifications - 1. Hydraulic Breaker/Hammer: Heavy-duty hydraulic breaker suitable for demolition of RCC/PCC, masonry and other structural elements. 2. Operating Weight of Breaker: Minimum 500 kg. 3. Carrier/Excavator Compatibility: Suitable for hydraulic excavator of approximately 20–30 tonne operating weight. 4. Impact Energy: Minimum 1,000 Joules per blow or equivalent manufacturer-rated performance. 5. Operating Pressure: Suitable for the hydraulic system of the carrier, generally 150–200 bar or as recommended by the manufacturer. 6. Hydraulic Flow: Approximately 80–150 LPM, or as required for proper operation of the proposed breaker and carrier.

Per day

3,922.2

₹39,222

Hiring and running of Gas cutter/Hammer with air compressor and operator complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme failed/could not be carried out due to any reason at site. Note: Gas cutter/hammer should be make of Esab or Messer or Hypertherm having Industrial oxy- fuel cutting set, complete with oxygen/fuel gas cylinders, regulators, hoses and cutting torch.

Per day

3,730.15

₹1,11,904.5

5.1

Hiring and running of Gas cutter/Hammer with air compressor and operator complete in all respect to DDA and its deployment as per direction of Engineer-in-Charge for demolition programmes in Narela Zone. When demolition programme carried out successfully. Note: Gas cutter/hammer should be make of Esab or Messer or Hypertherm having Industrial oxy- fuel cutting set, complete with oxygen/fuel gas cylinders, regulators, hoses and cutting torch..

Per day

2,061.75

₹20,617.5