GORT400

Cutting and open of B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities. SOR Rate -2026-27

Cutting and open of C.C. Road surface including stacking of excavated materials for lying of pipe lines as per the ditections of the departmental authorities. SOR Rate -2026-27

Earth work excavation Mechanical for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means - Upto 3 m depth

Earth work excavation Manual for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means - Upto 3 m depth

Providing bedding with Stone crusher dust for foundation trenches as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification and directed by the Engineer - in - Charge

Bailing out water from the water logged areas with oil engine driven pumpsets, including hire charges, fuel charges and wages for Driver and Helper etc,. complete.

Manufacture, Supply and Delivery of 700mm DI Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation, taxes & duties

Manufacture, Supply and Delivery of 300mm DI Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation, taxes & duties

Lowering the 700 mm D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. Unit 1.00 rmt PHE-LCIS-1

Lowering the 300 mm D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. Unit 1.00 rmt PHE-LCIS-1

Centrifugally cast (Spun) Ductile Iron pressure pies 300mm DI - 4m Length with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation but excluding taxes & duties etc complete.

Centrifugally cast (Spun) Ductile Iron pressure pies 300mm DI - 2m Length with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation but excluding taxes & duties etc complete.

Centrifugally cast (Spun) Ductile Iron pressure pies 300mm DI - 1m Length with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation but excluding taxes & duties etc complete.

Lowering the 300mm C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.PHE-LCIF-2

Jointing the 700mm DI C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987

Jointing the 300mm DI C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987

Jointing the 300mm dia C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85. unit each PHE-JCIF-5

Cost, supply of 300mm MS pipe including cost of MS plate, fabrication charges, loading at Manufacture point, unloading and stocking at work site and inclding of other necessary machinery and labour charges etc. complete for 1.00 Rmt.

Cost of 700 mm Machine End pair (Socket +Spigot) for providing M.S Specials on PSC pipelines excluding cost of M.S barrel including cost and conveyance to site etc., complete.

Cost of 600 mm Machine End pair (Socket +Spigot) for providing M.S Specials on PSC pipelines excluding cost of M.S barrel including cost and conveyance to site etc., complete.

Supply and delivery of 300 mm - PN 1.6 (MPa) "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation

Labour charges for 300mm dia lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves

Supply & Delivery of 150 mm - PN 1.6 (MPa) Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and transportation.

Labor charges for 150mm dia fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.

Cost of MS Flanges 300 mm dia x 15 mm thick including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange).

Cost of MS Flanges 150 mm dia x 15 mm thick including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange).

Plain Cement concrete (1:4:8) using 40mm metal with Machine mixing including cost and conveyance of all materials, labour charges for laying vibrating curing etc., upto plinth level.

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for Raft & Cover Slab

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.for side walls

Centering Charges for RCC vertical walls of plane surface including all type of labour charges

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Providing Vibratory Cement Concrete M20 grade design mix as approved by the department using 20 mm Graded hard granite machine crushed metal including cost and conveyance of all materials to site, machine mixing of concrete, all lifts, leads, delifts, centering, laying in position, vibrating, compacting, curing, removal of centering, all labour charges, tools and plants, and all other incidental and operational charges etc., complete as per specifications, drawings and as directed by the Engineer - in - Charge