Dotiyal gaon solar pumping W/S scheme (p1 and p2) in Takula Block Distt Almora under JJM

Amount

Providing of all materials, carting from Rail head Kathgodam to site of work, laying & jointing of G.I. Medium screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete.

Medium Duty (class 'B') 15 mm (For household connection)

Medium Duty (class 'B') 20 mm

Medium Duty (class 'B') 25 mm

Medium Duty (class 'B') 32 mm

Medium Duty (class 'B') 40 mm

Medium Duty (class 'B') 50 mm

Medium Duty (class 'B') 65 mm

Excavation in soil mixed with single boulders etc. requiring the use of special T&P, if any, for pipe line trenches including lift up to 1.5m and lead up to 30m with back filling, watering, ramming of excavated earth in the trenches.

Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50 m but excluding the cost of earth work.

Medium Duty (class 'B') 20 mm

Medium Duty (class 'B') 25 mm

Medium Duty (class 'B') 32 mm

Medium Duty (class 'B') 40 mm

Medium Duty (class 'B') 50 mm

Relaying of dismantled G.I.Pipe in true alignment in trenches including supply of all materials,labour,T&P etc. complete.

Medium Duty (class 'B') 20 mm

Medium Duty (class 'B') 25 mm

Medium Duty (class 'B') 32 mm

Medium Duty (class 'B') 40 mm

Medium Duty (class 'B') 50 mm

Supply and fixing of the following fittings including cartage of materials, labour, T & P etc complete but excluding the cost of excavation and chamber.G.M. Wheel valves (Class I) as per IS 778/1971

20 mm dia.

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

Construction stone masonry chamber 60x60x60 cm, inside in 1:4 cement & sand mortar with MS MH cover on top the chamber with proper locking arrangement. Wheel Valve chamber/bulk water meter chamber

Providing and fixing brass ferrule 15mm dia. nominal bore for domestic connections.

Providing and fixing of PTMT Bib cock 15 mm dia. nominal bore for domestic connections.

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. (Labour cost only)

Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work as per drawings and technical specifications. clause 802, 803, 1202 & 1203

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Random rubble masonry laid dry in breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete .

R.R. stone masonry in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for the proper completion of work.

PLASTERING with cement mortar 1:4

Construction of French well made of 250 mm dia x 4.8 mm thick MSERW pipe, in 1.20 m length. Including all work as per unit estimate.

Construction of Slow Sand Filter 5.00x3.00 m (15.00 sqm). Including all work as per unit estimate.

Testing of all materials used in water supply as per specific IS standards from an ISO 9001-2015&ISO/IEC 17025:2017 accredited laboratory and also having accreditation by National Accreditation Board for Testing and Calibration Laboratories as below. G.I. Pipe for Physical & Chemical properties as per IS:1239 complete per pipe sample required 1mtr.x3pcs.

Supply and fixing of information and sign with logo of jal jeevan mission Board of work at site

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 R.C.C grade M 20 Height upto 5m.

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202

Providing and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-in- charge.

Construction of toe walls for protection of slopes as per drawing and technical specifications Clause 1302.5 Cement concrete grade M 10 in case of concrete block pitching PCC Grade M-10 (Nominal mix 1:3:6) (Hand mixing)

Supply of all materials, labour and T & P etc. and construction of R.C.C. Clear Water Reservoir of following Capacity in K.L. as per type design and drawing including fixing of pipes and fittings.

15.00 KL Capacity-

12.5 KL Capacity-

7.5 KL Capacity-

5.00 KL Capacity-

4.00 KL Capacity-

3.00 KL Capacity-

Earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift up to 1.5 mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil. Excavation for site development of sites for CWR and Roughening Filter

Providing steel R.S.Js/built-up steel sections including cutting, welding/rivetting, hoisting, fixing in position for composite girders with shear connectors complete

Supply and installation of bucket type chlorinator.

Supply and fixing of the following fittings including cartage of materials, labour, T & P etc complete but excluding the cost of excavation and chamber.G.M. Wheel valves (Class I) as per IS 778/1971

SOLAR PUMPING WORK Supply and Installation, of submerisble solar pump with adequate capacity 7.5 HPsuitable motor complete with solar pump controller (control panel cum starter) suitable for above motor complete in all respects for 17010 LPD at 145 Mtr TDH(Total Dynamic Head) including commissioning and setting to work and testing of entire equipment installed at site including supply of necessary fixing accessories ,Solar photovolt polycrystalling solar module /PV panel Array24x335 watt (as per I.E.C standrad including supply of fitting of G.I. solar PV module mounting fix type structure to mount all the panels system ,RCC foundation, panel mounting clamp,nut, bolts etc),required cabeling, head load cartage with loading and unloanding complete in all respects.

Supply /Fixing with main piping & valves comprising of the following (i)40mm/50 dia CI D/F sluice valve class150- 02No. (ii)40mm /50mm dia CI D/F Reflux valve class 150- 01No. (iii)40mm/50 mm dia Bend 90-1 No. (iv As per site requirement TeeA/F- job (v)Gauge with fitting-1 set

Site development for construction foundation for PV module panel and other related items .

Chain link fencing system of suitable size to protect solar PV module system and sump tank area From unathorized intrusion including 1.2x 1.8M MS gate with R C C piller.

Safety kit with lightening arrestor, copper strip, earth kit etc.

Supply of 1 Nos. solar light (7.5watt LED) inside the pump house and 2Nos. solar street light (14watt LED) for out side area of pump house with accessories, including batteries, complete in all respect.

3 Month trial running maintenance including watch & ward.

Tools ( key sets,pleir 1no,screw driver etc)