Periodic Maintenance Work and Repair and Renovation of existing toilet blocks at kathlal Sub-Division under Mahmedabad Division.(Including Gst)

No. Amount

Demolition including stacking of serviceable materil as and

1 disposal of unserviceabl ematerials with all lead and lift. (i) 2 1020.6 CMT

R.C.C. work

Demolition and disposal of unserviceable materials with all lead

2 and lift.(i) Lime concrete. 2 510.3 CMT

Demolition of Brickwork and stone masonry including stacking

3 of serviceable materil as and disposal of unserviceable materials 2 530.78 CMT

with all lead and lift.(ii)InCement Mortar.

Dismentling steel work including distempering and stacking the

4 materials with all lead and lift. 10 3.63 KG

Excavation for foundation upto 1.5 m depth including sorting

5 out and stacking of useful materials and disposing off the 5 259.14 CMT

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

coarse sand : 6- hand broken stone aggregates 40 mm nominal

6 size) and curing complete excluding cost of formwork in (A) 3 2976 CMT

Foundation and Plinth

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm.

7 in depth consolidating each disposited layer by ramming and 5 129.1 CMT

8 layers of 20cm. thickness including watering, ramming and 5 279.23 CMT

consolidating etc. complete.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

9 including bending, binding and placing in position complete 10 75.46 Kg

upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less 35 kg. / sq. cm. in foundation and

10 plinth in cement mortar 1:6 (1 -Cement : 6 - Fine sand) 2 3981.21 CMT

Conventional Bricks

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering for GF floor & FF

11 floor two levels and finished even and smooth in (i)Cement 15 190.74 SMT

mortar 1:3 (1-cement:3-sand)

Providing 15 mm. thick cement plaster on internal surface

of walls up to height of 10 Mtrs. above ground level in single

coat in C. M. (1:3) on fair side brick / concrete wall for interior

plastering including finishing without a floating coat of neat

cement slurry, necessary drip moulding, scaffolding, curing etc

complete as directed by E.I.C. (for GF & FF)

20 mm thick sand faced cement plaster on walls upto height

13 metres above ground level consisting of 12mm thick backing 10 332.33 SMT

coat of C.M.1:3(1-cement :3-sand) and 8 mm thick finishing

coat of C.M.1:1(1-cement:1-sand) etc. complete.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M.1:5 C.I.cover with

frame(Light duty)455 mmx610 mm intenal dimension total

weight of cover with frame to be not less than 38Kg.(Wt.of

14 cover 23Kg.)and Wt.of frame 15Kg.)(R.C.C.top slabe with 2 7109.35 No

1:2:4mix(1-cement:2-coarse sand:4-graded stone aggregate

mm size)foundation concrete 1:5:10 inside plaster 15 mm thick

with cement mortar 1:3 finished smooth with a floating coat of

neat cement on wall sand bed concrete etc.complete.(iii)Inside

dimensions 600mmx 850mm and 450mm deep for pipe lines

with three or more inlets

Providing & Fixing ready made 2000/5000 LITRE capacity

P. V. C. water tight storage tanks made from linear low

density polyethylene & low density polyethylene LDPF product

confirming to I. S. : 10146 - 1982 with cover including providing per

& fixing one float valve ball-cock, one of G. I. Waste pipe with Liter

plug one of G. I. Over flow pipe of length up to 0.30 mt.

including making all connection for inlet /outlet supply with

necessary fittings for outlet / inlet etc., complete as directed by

EIC. (Syntex water tanks, 3-2000LTR + 2-5000LTR, white)

Kapadwanj_Town_and_east_Sdn_toi

P & L 24" x 24" vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement:

16 coarse sand) on new surface or fixing on existing flooring by 10 1383.99 SQM

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for antiskit

Providing and laying coloured glazed tiles of the size 300 mm x

17 skirting, risers of steps and dedo on 10 mm. thick cement 200 1473.5 SQM

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

cement slurry.

Applying two coats of Birla (white cement based) or Asian

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to give

18 an even shade including thoroughly brushing the surface free 15 40.19 SQM

from mortar dropping and other foreign matter and sand

papered smooth.

Wall painting (three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface

19 to give an even shade including throughly brushing the surface 15 118.24 SQM

free from mortar droppings and other foreign matter and sand

papered smooth.

Providing and laying water proofing treatment in sunken portion

of WCs, bathroom etc., by applying cement slurry mixed with

water proofing cement compound consisting of applying:

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with

water proofing cement compound @ 0.253 kg/ sqm. This layer

20 will be allowed to air cure for 4 hours. 50 452.96 SQM

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed

water proofing cement compound @ 0.126 kg/sqm. This layer

will be allowed to air cure for 4 hours followed with water

curing for 48 hours. (The rate includes preparation of surface,

treatment and sealing of all joints, corners, junctions of pipes

and masonry with polymer mixed slurry)

EWC: Providing and fixing Wall Hung water closet (European

PP soft close seat cover, P OR S Trap M.S. or G.I bracket , CP

brass hinges and rubber buffers and Jointing the trap with soil

pipe in cement mortar : 1:1 (1 cement : 1 fine sand) including

cutting and making good the walls and floors where required

withall labour and materials. All works to be carried out as per

instructions and direction of Engineer-in-charge. (Model Jeguar

CNS-WHT-959SPP or Cera cordo – S1043108)

Flushing Tank: Providing and fixing Preumatic Flushing tank

with connector accessories, complete. including all type of

22 finishing. (Model Jaguar JCS-WHT- 6 4710 EACH

Flushing Plate: Providing and fixing CONTROL PLATE ALIVE -

23 flush plate with all accessories, complete. including all type of 6 1285 EACH

finishing.

(Model Jaguar JCP-CHR-852415)

Bib Cock: Providing & Fixing Two Way Bib Cock with Wall

24 Jaguar Make, complete as directed by E. I. C. (Jaguar LYR- 12 1784 EACH

Wash Basin, Type-2 : Providing and fixing Wall Hung type

Wash Basin of

420x420x155mm rectangular, including grid drain, stop cock,

fittings of bottel

25 trap and fixing of wash basin with L-brackets and with required 6 3670 EACH

accessories.

Work complete including all type of finishing. (Model Jaguar

CNS-WHT-813+

LYR-38053 Stop cock) (Note: bottol trap will be paid separately)

Bottle Trap: Providing and fixing Bottle Trap 32mm Size with

300mm & 190mm Long Wall Connection Pipes & Wall Flange of

26 approved make, with necessary coupling for wash basin & sink, 6 1700.00 EACH

complete including all type of

finishing. (Model, Jaguar ALD-769L300x190)

Basin spout: Providing and fixing wall Mounted Basin spout of

JAGUAR make Exposed Part Kit of Single Concealed Stop Cock

Consisting of Operating Lever, Cartridge Sleeve, Wall Flange

27 (with Seals) 6 2200.00 EACH

and Basin Spout. complete including all type of accessories.

(Model Jaguar KUP-35441KPM)

Kapadwanj_Town_and_east_Sdn_toi

Health faucet: Providing and fixing Hand Shower (Health

Faucet) with 8mm

28 1.2 Meter Long Flexible Tube & Wall Hook, complete. including 6 1415 EACH

all type of

accessories. (Model Jaguar ALD-573)

Urinal: Providing & Fixing Urinal with P.V.C water pipe, 32mm

brassa waste coupling with Connection 32mm dia waste Pipe,

stop cock etc.

29 Complete. Rate are inclusive of all matreials, Labour & 6 7370 EACH

Necessary Fittings etc.

Complete as per Detailed Drawings, Specifications and as per

the Instruction

of Engineer In charge. (Model CERA -CAPRIANA – S4020112).

Mirror Glass: Providing and fixing 600mm x 450mm bevelled

30 edge mirror of 5mm glass Modigaurd brand mounted on 6mm 5 825.48 EACH

thick plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers, complet as per direction of E.I.C.

Towel Rod: Providing & Fixing 600 mm. long & 24 mm. dia.

towel rod with

31 brackets etc., complete as directed by E. I. C. (Jaguar Model 6 597.22 EACH

Toilet Papers Holder: Providing and fixing Toilet papers holder

32 (C.P. Brass) of approved quality, make & model. Work 6 414.53 EACH

complete including all type of finishing. as directed by EIC.

Providing and fixing in position Soap Dispensor as per

33 approved make list and work complete including all type of 6 1087 EACH

accessories. Model equivalent to JAQUAR - CAT- CAN-1135N

Providing & fixing to wall, ceiling and floor 10 KG / Sq. Cm

working pressure P.V.C. pipe for drainage line including

necessary fittings like bend, tee, Y bend, plug bend etc., fixed

with wall by means of GI clamps of approved quality made from

34 20 x 3mm at 1.50 meter interval of approved quality with oil 10 900 RMT

paint and nails

filling the joints with PVC solution including necessary

excavation if required as directed by E.I.C. Rate is including

necessary excavation if required. 160 mm dia pipe

Providing, laying & jointing in true line and level 15mm dia

UPVC Pipe ( SCH - 40 ) including fittings as approved by

engineer in charge.Pipe shall be fix on the wall with the help of

clamp at every two mt c/c or shall be conceled as directed

including necessary fittings etc.including testing of pipe and

joints and fixing the same with adhesive solvent, including cost

of materials.

36 Do as above but for 25 mm dia UPVC Pipe. 3 90.93 RMT

37 Do as above but for 32 mm dia UPVC Pipe. 1 117.97 RMT

38 Do as above but for 40 mm dia UPVC Pipe. 3 146.65 RMT

39 Do as above but for 50 mm dia UPVC Pipe. 1 193.73 RMT

40 Providing & Fixing approved best quality I. S. I. approved Gun 3 416.47 EACH

matel gate (full-way) Wheel valve. 25 mm. dia. Valve

41 -do- but for 40 mm. dia. Valve 3 656.86 EACH

Providing & fixing PVC Nahani trap of approved size & make

with additional S.S. perforated Jali Cover & PVC Pipe outside

42 the wall with plug, bend, etc., complete as directed by E.I.C. 8 552.83 EACH

100 mm. dia.

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

43 nominal size) for R.C.C lintel including finishing smooth 0 10118.21 cmt

with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement.

cement concrete M:25 RCC work in GROUND FLOOR SLAB for

all thickness/cross section etc. complete as directed by E. I. C.

(NOTE : The floor-wise slab concrete work of Main Building

should be done without joint on a single day itself.) including

finishing smooth with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement.

Kapadwanj_Town_and_east_Sdn_toi

Providing China Mosaic water proofing treatment in Terrace of

different levels

preparing roof surface for laying brick bat on cement mortar

(1:4) with special water proofing composed in necessary

gradient for easy flow of rain water, brick bat coba is finally

covered by China Mosaic Tikdi fixed by white cement base

added with special water proofing compound. The treatment is

carried along the vertical surface of the parapet and other

45 joining wall up to height of about 300 mm in a shape of quarter 0 1348.52 smt

round vata. The average thickness of the water proofing

treatment is about 140 mm. Minimum thickness at rain water

outlet points being 75 mm including curing etc. complete as per

specification and instruction including water proofing test for

minimum 3 days etc., complete as directed by E. I. C.

Contractor should give guarantee for water proofing for 5 years.

All the material including cement should be brought by the

contractor at his own cost. 10% Amount will be kept with

company during guarantee period.

Providing & fixing granite in flooring, riser and Treads of steps,

partition for drinking water, moulding the edges and grooving if

46 directed, of size not less than1200mm in length and full width 10 2500 SMT

of treads in C.M.1:2 neatly finishing the joints, curing etc. comp

as directed by EIC.

Kapadwanj_Town_and_east_Sdn_toi

Providing and fixing 35 mm thick Decorative type Water proof

flush door shutters, solid core construction with wood frame

with Polish of first class hard-wood with cross band and face ply-

wood face panels, 1.0 mm thick laminate on both sides

including Stainless steel fixtures and fastening like tower bolt,

stopper including for door shutters sides etc complete. as

directed by engineer in charge.(Measurement Shall be

Consider L X H)

Toilet Ventilation : Providing and fixing standered extruded fo

Walnut anodized alluminium seciton of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour

48 anodized alluminium frame for ventilation with 5 mm thick 3 2200 Smt

frosted glass as detailed etc complete for Ventilation.(The rate

is inclusive of providing mosquito net with cleat on one

side) & provision of exhaust fan.

Roller Blind: Providing and fixing Roller Blind curtain of water

proof greenguard fabric fixed on window level on wooden

batten with curtain lift of ball chain and same color fabric heavy

metal pelmet with white color & box type look, heavy bottom

49 rail and with Eco black-out material with necessary hardware 5.0 1300.00 Smt

fitting, material and labour etc complete. design and colour as

instruction by E.I.C. (Basic Rate Rs. 110/Sft)

Gypsum False Ceiling: Providing and fixing gypsum board

ceiling as per manufactures' specifications incl. acrylic paint.

Fixing of suspended gypsum plain false ceiling by using

standard company section (GYPSTEEL ULTRA), which includes

providing and fixing G.I. parameter channels of size 20 X 28 X

30 X 0.55 mm thick having one flange of 20 mm and another

flange of nylon sleeves and screws at 610 mm center. Then

50 suspending G.I intermediate channels of size 15 X 45 X 15mm, 45.0 992.25 Smt

0.9 mm thick fixed with two flanges of 15 mm each from the

sophist at 1220 mm center with ceiling angle of width 25 mm x

10 mm x 0.55 mm thick fixed to sophist with G.I. cleat and steel

expansion fasteners. Ceiling section of 0.55 mm. thickness

having knurled web of 51 mm. and two flanges of 26 mm each

with lips of 10.5 mm. area then fixed to the intermediate

channel with the help of connecting clips and in direction

perpendicular to the intermediated channel

Continuous... at 457 mm. center 12.5 mm tapered edge

gypsum board (conforming to is 2095-1982) is then screw fixed

to ceiling section with 25 mm drywall screws at 230 mm center.

Screws fixing is done mechanically either with screwdriver or

drilling machine with suitable attachment. Standard company

manufactured section (GYPSTEEL ULTRA) should be used for

the entire framework. Finally the board are to be jointed and

finished, so as to have a flush look which includes filling and

51 finishing the tapered and square edges of the boards with 0.0 0.00 Smt

jointing compound, paper tape and two coats of primer suitable

for Gyp-board (as per recommended practices of India Gyproc -

Saint Gobain make). (also including application of primer and

preparing surface even & sand papered smooth with lapi,

astar...) Including three coats with plastic emulsion paint of

approved brand & manufacture. Including all materials and

labour etc. complete as per detail drawing and instruction of

engineer-in charge.

Providing and fixing any material existing plumbing pipe

with PVC coated U bolt in 14 guage Z-Clamp at every

52 1 M c/c at 3 Inch wall distance with anchore fastener for 10.0 258.00 rmt

every dia of pipe from 15 to 110 mm diameter and

necessary fitting. Complete as directed by engineer in charge.

(note: should be instaalled after completion of plaster)

TOTAL FOR CIVIL ITEMS =

Total FOR CIVIL ITEMS with GST =

I/We a/are willing to carry out mention work at -------------------Above/below estimated rate as per

company’s norms.

Signature of Tenderer Executive Engineer (O&M)

Division office MGVCL