SPECIAL REPAIRS TO WASHROOMS AND PROVN OF PM SHRI LAB AT KV AT AF STN KUMBHIRGRAM

Taking down cement plaster of any description from brick/ stone wall surfaces including racking out joints, hacking for key, scrubbing down with water etc. and removing debris to a distance n.exc. 50 m complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster on in two layers each of 10+5mm thick in Cement Mortar (1:4) with WPC @2% wt of cement on fair faces of brick work complete all as specified and directed. (Note :Integral water proofing compound shall be measured and paid separately.)

Per point

Material and Labours for two coat of oil bound distemper over a coat of chalk whitening on newly plastered surfaces of walls incl. necessary preparation of surfaces all as specified and directed.

M&L for preparing of old surfaces of walls and applying one coat of oil emulsion distemper on the same after complete removing the existing treatment and preparation of internal wall surfaces complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of white wash on celing complete all as specified and directed.

Complete removal of existing treatment including washing, rubbing down and stopping of existing surfaces and applying two coats of exterior emulsion paint of weather coat including one coat of emulsion primer and preparation of surfaces on wall surface all as specified and directed.

All as per item No. 08 above but in new surfaces complete all as specified and directed

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (first quality), complete all as specified and as directed.

All as per item No.10.00 here-in-before, but on steel surfaces.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Non - skid coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for coloured Non skid ceramic floor tiles 7 to 8 mm thick (Square/rectanguler) area of each tile exceeding 0.11 sqm but not exeeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed in CM 1:6 complete all as specifed .

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 15 mm thick backing coat of mortar in CM 1:4 for laying wall tiles finishes complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as Specified.and removing debris to a distance n.exc. 50 m complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:3 on sunken portion of toilet on vertical / horizontal surface and mixing only liquid water proofing compound as per manufacturers instructions, finished the surface even & smooth without using extra cement including applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre complete all as specified and directed. Note:- WPC will be measured & paid separately

M &L for plain cement concrete type E-2 (1:5:10), using 40 mm graded stone aggregate, for filling sunken portion of toilet and similar work complete all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B1 (using 12.5 mm graded aggregate) as in levelling course complete all as specified and directed.

Dismantling cast iron work of any description with all fittings and fixtures.

S&F 100 mm dia Cast iron sand spun pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete.

S&F 100 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100 mm dia bore Cast iron oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete.

S&F cast iron vent cowl 100 mm bore dia

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F in repair cast iron floor trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed.

S&F in repair cast iron nahani trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed.

S&F in repair SS Grating of size 100 mm dia fixed with white or grey cement complete all as specified.

S&F in repair 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2, fixed as in spout pipe and making good disturbed surface in CM 1:3 complete all as specified and directed.

S&F in repair 40 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2, fixed as in spout pipe and making good disturbed surface in CM 1:3 complete all as specified and directed.

M&L for cutting holes into or through stone/PCC block wall built cm. and making good in cm 1:3 or PCC type B-1 on required Superficial area n exc 150 sq.cm all as specified .

Taking down steel water tubing and connection 15mm dia bore and removal from site.

Taking down steel water tubing and connection 20mm dia bore and removal from site.

Taking down steel water tubing and connection 25mm dia bore and removal from site.

Supply and laying of GI 15 mm Tubes, medium grade ,galvanised,with all fitting;laid in trenches fittings on walls concealed type in any type of masnory or laying in floors complete all as specified.

Supply and laying of GI 20 mm Tubes, medium grade ,galvanised,with all fitting;laid in trenches fittings on walls concealed type in any type of masnory or laying in floors complete all as specified.

Supply and laying of GI 25 mm Tubes, medium grade ,galvanised,with all fitting;laid in trenches fittings on walls concealed type in any type of masnory or laying in floors complete all as specified.

Fixing and laying of GI 15 mm Tubes, medium grade ,galvanised,with all fitting;laid in trenches fittings on walls concealed type in any type of masnory or laying in floors complete all as specified.

Fixing and laying of GI 20 mm Tubes, medium grade ,galvanised,with all fitting;laid in trenches fittings on walls concealed type in any type of masnory or laying in floors complete all as specified.

Fixing and laying of GI 25 mm Tubes, medium grade ,galvanised,with all fitting;laid in trenches fittings on walls concealed type in any type of masnory or laying in floors complete all as specified.

M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete.

S & F in repairs Vitreous china squatting pan, Orissa pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including 110mm PVC (SWR) WC connector with lip ring and PVC (SWR) P/S trap 110mm complete all as specified and as directed.

Supply and fixing in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white ncluding pedestal pan and trap, connection to drain (or out going pipe) and to flushing pipe, antisiphonage pipe,Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

Supply and Fix in repair Vitreous China wash basin , white, flat bak, size 630x450mm excluding taps, including waste pipe and coupling, chain and plug and porcelein stopper but incl brackets complete all as specified and directed.

S&F in repairs vitreous china Urinal, Half stall type white (excludign flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed in repairs.

S&F in repair Urinal spreader of CP for fixing with 15 mm dia pipe complete all as specified and directed.

Supply and Fix in repairs to PVC valveless, symphonic action type , flushing cistern, low level, coloured with inlet, ball valve, float and handle incl brackets with 450mm long pvc connection outlet flushing pipe of capacity 10ltrs complete all as specified and directed.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repairs 15 mm bore stop cock,(angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing in repairs 15 mm bore stop cock,(angle valve) cast copper alloy, fancy type, chromium plated with long shank, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (concealed type) complete all as specified and directed.

Supply and fixing in repairs 15mm bore bib taps cast copper alloy, fancy type, chromium plated, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repairs pillar taps 15mm bore cast copper alloy, fancy type, chromium plated, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair CP Health Fauset (Hand shower) with 8mm dia 1 metre long easy flex tube and in chorme finish & wall hook all as specified and as directed.

Supply and fix in repair chromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium platedbrackrt guard and railing 60 cm long complete all as specified and directed.

S&F in repair Chromium plated shower roses with swivel joints, dia 125 mm size, including fixing to steel pipe or union complete all as specified and as directed

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutters from the frames) not exc. 1.5 sqm each and removing from site.

Taking down shutter only exc. 1 Sqm but n. exc 2 sqm each and removing from site.

Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete as directed.

Factory made solid pannel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside the solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the ms frame welded/sealed to the stiles and rail with suitable pvc sheet beading, and jointed together with solvent cement, supplied and fixed in repair in the frame at site on per specification and drawings complete all as specified and as directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed paneled shutter (any number of panels), with lock rail and panel of 12mm thick BWP veneered particle board with commercial veneering on both faces. The sizes of rails and stiles as per IS:1003 (Part -I) Kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified

and directed.

Taking down steel windows and ventilators with frame (without taking off shutters) complete area not exc 1.5 sqm and removing from site of work all as directed by Engineer-in-Charge.

S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F MS work for chimney bars, bearing bars, window guard bars, plain, let in and fixed independently in wooden frames, and similar articles conforming to Fe 410-0 or Fe 310.00 including making holds in chowkats or welding in iron frame etc guard bars of independent or framed complete all as specified and directed.

S&F 300mm long mild steel oridinary rat tail rod pattern spring incl roller and roller plate complete

S & F Butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 100 mm).

S&F 300 mm long Aluminum alloy, anodised sliding door bolts, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy.

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section.

S&F 150 mm long Aluminum anodised barrel tower bolts of extruded section.

S&F 150mm long alluminim handles, cast type, anodized and fixed complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including preparation of surfaces all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new steel surfaces including preparation of surfaces all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) form metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Material and labour for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane.

Same as item above but figured or pin headed type.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation, etc n exc 10 sqm on plan and getting out in soft/loose soil. complete all as specified and directed.

Excavation in trenches, exc 1.5m wide and n exc 3.0m in depth for foundation, etc n exc 10 sqm on plan and getting out in soft/loose soil. complete all as specified and directed.

M&L Cement concrete 1:4:8Type D2 (using 40mm graded aggregate) as in foundation, filling and mass concrete.

M&L for Flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams, and similar work vertical of to batter, rough finished flat surfaces of concrete.

M&L for Reinforced cement concrete (DESIGN MIX M-25, using 20mm graded aggregate) as foundations, including rafts, footings foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete

M&L for Reinforced cement concrete (DESIGN MIX M-25, using 20mm graded aggregate) as Columns, pillars,piers, posts and struts

M&L RCC M-25 design mix (Using 20 mm graded stone aggregate) as in lintal and chajja etc all as specified and directed.

M&L for Reinforced cement concrete (DESIGN MIX M-25, using 20mm graded aggregate) as Beams, cantilivers, bressummers, lintels over 1.5m span

M&L for Reinforced cement concrete (DESIGN MIX M-25, using 20mm graded aggregate) as slabs supported on walls, beams and columns in floors, roofs,landings, balconies, canopies, deck slabs and in shelves and the like

M&L for flat formwork to sides of pillars, posts, struts, piers, columns and stanchions, with fair finished surfaces all as directed

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc, rough finished surfaces of concrete.

Formwork to chullah hoods, chajjas, troughs and similar items including edges

S&F MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less then 0.9 mm dia or securing with clips complete all as specified and directed.

S&F MS TMT 6mm to 8mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge

M&L brickwork with subclass 'B' old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer -in- Charge.

M&L for 75mm thick cement concrete Type D2 ( 1:4:8) using 40mm graded stone aggregate as in subbase complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as plinth protection /hardstanding etc complete all as specified and as directed.

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 for skirting/dado etc complete all as spd and directed

M&L for light shade doubled charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/dado /skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd and directed

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spd and directed

M&L Green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as spd and directed

Returning, fillingin, including spreading, leveling, watering and well remming in layets not exc 25cm in soft/loose soil

Removing (soil) excavated materials n exc 50m and depositing where directed at a level n exc 1.5m above the sarting point

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:4 finished surface even and smooth without using extra cement. complete all as spd and directed

Supply only integral water proofing compound confirming to IS 2645 – 2003. MAKE : SIKA/ ACCOPROOF/ CICCO NO-1

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) and any pattern with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces walls/fins/facia/soffit/chajja/ceiling etc complete all as specified and directed

M&L for two coats of wall care putty over plastered surface of wall/ceiling including rubbing with sand paper to prepare the surface even and smooth complete all as specified and as directed.

M&L for Preparation of new surfaces of Surfaces of any description over 10cm girth or width, not otherwise described and applying Two coat of Plastic emulsion complete all as specified and as directed by Engr-In-Charge.

Material and labour for 5 mm thick rendering in CM (1:3) on ceiling or concrete surface finished even and smooth without using extra cement,

complete all as specified and directed

Material and labour for three coats of white wash on newly plastered surface of ceiling including necessary surface preparation, complete all as specified and directed

S&F aluminium three track Powder coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed by Engineer-in-Charge

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates,Fe-290 (Gde E 165) etc as door frame, steel gate,sink, hand wash basin and cooler stand etc complete all as specified and directed Engineer-in-Charge

S&F 30mm thick. flush shutter, solid core construction with particle board core and ply woood face panels commercial type on both side complete all as specified and directed Engineer-in-Charge

S&F 35 mm thick second class hardwood Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fitted to chowkats complete all as specified and directed by Engineer-in-Charge

S & F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engineer-in-Charge

S&F Prelaminated medium density fibre board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S & F Continuous (piano) hinges, mild steel, width of flaps (when open) is 30 mm bright finish or electrogalvanised

S& F for magnetic catcher of plastic body with striking plate etc and fixed complete

S&F 75 mm in size aluminium handles cast type anodized complete all as specified & directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spiked, framed guard bars, iron doors, ladders, framed blasters, walkways, railings, framework of water tanks and similar work conforming to Fe 290 Grade E-165

S&F White vitreous china laboratory sink size 600x450x200 with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets as required and incl. connecting union to waste pipe; upto 0.5 sqm each complete all as spd and directed

S&F CPVC ball valves for 32 mm outer dia pipecomplete all as specified and directed by Engineer-in-Charge

S&F 15 mm bore, swan neck, taps cast copper alloy capaston head CP, screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed complete all as spd and directed

M&L for 75 mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement complete all as specified and directed by Engineer-in-Charge

S & F Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as spd and directed

S&F 32mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supply and fixing curtain rails,anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

M & L Surface excavation not exceeding 30cm deep and averaging 18 cm and gettingout in soft /loose soil.

M&L hard core broken stone or boulders of 63mm gauge, deposited spread and leveled in layers not exceeding 15cm thick watered and well rammed to a true surfaces all as specified and as directed.

M & L for 100mm thick PCC 1:3:6, type c2, using (40mm graded stone aggregate) as in sub- base floor.

M & L for 15mm thick screed bed or bedding layers of mortar in CM (1:4) for laying floor finish

M & L for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and no pigment, set, jointed & pointed in neat cement slurry in floors over & incl 20mm cement mortar screed in CM 1:4, complete all as specified.

Supply, lay, connect and test GI tubing ,medium grade with all fitting, fixed to walls, floors, ceiling etc. complete of following sizes:- (b) 20mm bore

Supply, lay, connect and test GI tubing ,medium grade with all fitting, fixed to walls, floors, ceiling etc. complete of following sizes:-25mm bore

Supply, lay, connect and test GI tubing ,medium grade with all fitting, fixed to walls, floors, ceiling etc. complete of following sizes:- (a) 15mm bore

S & F gun- metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete for size 20mm bore

S & F gun- metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete for size 25mm bore

Supply and fix Stop/ angle valves, 15mm bore, long shank fancy type, brass chromium plated, capstan head with long spindle, fixed to iron pipe or brass ferrule and fixed all as specified and as directed Model No MQT -513 of Essco or eq model of make specified

S & F 15mm bore concealed stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union

S&F pillar tap for 15 mm bore pipe, fancy types , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with a without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F in Repairs 450mm long PVC Connection. Cat No:323-Z Prayag (Make : Prayag or equivalent)

S & F chromium plated towel rail, 20mm dia, D type, 60cm long between flanges of approved quality

Taking down carefully copper/ Aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, boards, DB, MCB, light fittings etc), removing materials from site and making good disturbed surfaces of walls, floors etc, complete all as specified and directed

M & L for point wiring with PVC insulated and unsheathed multistran

M&L for sub main wiring with 2 run of single core 6.0 Sqmm FRLS (ISI Marked) PVC insulated unsheathed multistranded copper conductor cable drawn through and including PVC Conduit/ casing capping of required size alongwith accessories on roof/walls/ ceiling etc including one run of 6.0 Sqmm FRLS (ISI Marked) PVC insulated unsheathed multistranded copper conductor as earth wire, including taking down old wiring, complete all as specified and directed. Note :- Two run of 6.0 Sqmm single core cable, one run of 6.0 Sqmm earth wire and one run of PVC conduit/ casing capping shall be measured as one run length

Supply and fix modular Switch single pole, one way 5 Amp complete all as specified and directed.

Supply and fix modular Switch single pole, one way 15 Amp complete all as specified and directed.

Supply and fix modular Socket 5 Amps, 230 volts, complete all as specified and as directed.

Supply and fix modular socket, 16 amps complete all as specified and directed.

Supply and fix Switch piano flush button single pole, one way 6 Amp, complete all as specified and directed.

S&F ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and as directed.

S&F modular white cover plate with frame of 3 module complete all as specified and directed.

S&F modular white cover plate with frame of 6 module complete all as specified and directed.

S&F modular white cover plate with frame of 8 module complete all as specified and directed.

S&F Metal flush box of 3 module complete all as specified and as directed.

S&F Metal flush box of 6 / 8 module complete all as specified and as directed.

Fixing only LED lights fitting 4 feet 20 watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. (Serviceable LED lights obtained shall be reused)

Supply and fixing LED lights fitting 2 feet 10 watt 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Material and labour forbracket made out of 1.5 mtr long 40 mm dia GI pipe (Light grade) with accessories for fixing of street light and building light all as specified and directed

S&F miniature circuit breaker (MCBs) TPN , 240 Volt, 32 Amps, "C" series,10 KA breaking capacity, complete all as specified and directed

S&F MCB, SP, AC, 240 volts IP-43 of 6 to 32 Amps capacity "C" series and making connections incl taking down unsv one complete all as specified & directed.

M&L Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanized earth wire 4 mm by means of bolt, nut, check nut and washer of galvanized iron or steel earthing lead to be protected by galvanized iron pipe of 40 mm bore light grade and other end connected to earthing test point or main controlling switch as directed includ

ing providing funnel with 20 mm bore galvanized iron pipe medium grade for watering wire mess all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion as directed.

Supply and fixing round shape 12watt 220 volts ac recessed type LED light fitting with With high efficiency PMMA DIFFUSER Soft glare free light complete with drivers,holders LED lamps suitable for roof ceiling including connecting up with three core flexible copper conductor cable cup suitable size complete all is specified in as directed

Supply and fix exhaust fan 300 mm sweep AC, 240 volts, metal body, fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable including loouvers complete all as specified & directed.

Supply & Laying connecing and testing in trenches / fixed on poles/walls /laid in duct / GI Pipe etc. of size Cable size 25 Sqmm, 3.5 core LT cable XLPE insulated, PVC sheathed armoured heavy duty electric cable with aluminium stranded conductor 1100 volts all as directed by Engineer in Charge.

Supply and fix for 63 AMP, MCCB 4 pole 415 volt, AC 50 Hz, 4 pole, 25 KA with adjustable thermal and fixed magnetic setting system against over load and short circuit conditions incl neutral adjustment (Ics=75% of Icu) of capacity complete all as specified and directed.

Material & labour for cable end termination joint kit (Heat shrinkable), outdoor, for LT XLPE insulated,armoured electric cable with aluminium conductor,11 KV (Earthed) grade including jointing material and accessories complete and testing, suitable for the 25 sq.mm 3.5core size cable complete all as specified and directed.

M & L for providing of fine dry river sand cushion in trenches for cable protection complete all as specified. NOTE: - Only compacted thickness will be measured and paid.

Supply and laying Sub class B burnt brick old size laid flat in trenches over the cable with the length of concrete cover perpendicular to the direction of the cable length, adjacent / abutting each other at avg gap of 10-15 mm complete all as specified.

S &F rotational moulded polyethylene water storage tank of 1000L capacity (cylindrical / vertical with closed top) complete hoisted and fixed in position, with lid,with lid, tounge nipple for inlet, outlet connections etc. , overflow complete all as specified in section 18 of SSR Part I 1991 including fly nut, 25mm bore PTMT Ball valve with PVC ball and alumin rod complete tounge nipple for inlet, outlet connections etc. complete all as directed by Engr-in-Charge.

S&F 25mm boreStraight plain brass ferrules (or connecting screws) screwed both ends and fixed for addition altretion to existing pipe

Material in Labor for overhead water tank Galvanized iron cage of size 1.2 x1.2x1.4m Frame made out of Engle iron off size 50 MM by 50 MM by 6 MM and flat iron of size 20x3mm,Frame structure made out of equal angle iron all around and closed on top with Opening arrangement made out of inch and locking arrangement and Mesh made out of iron section as directed and grouting the structure which cement motor one is to 4 in tang base complete all age specified and is directed