Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.7 LAccepted-Finance | 1 | Accepted-Finance 1 | |
| 2 | 2₹1.8 L+₹4,493.03 (2.62%)Rejected-Finance | 2 | Rejected-Finance 2 | |
| 3 | 3₹1.8 L+₹12,782.44 (7.44%)Rejected-Finance THOPPIL HOUSE KAMPALADY PORUVAZHY PO SASTHAMCOTTA 690520 | SASTHAMCOTTA | KOLLAM | KERALA | 690520 | 3 | Rejected-Finance 3 |
| Sl No | Description | Qty | Unit | UNNIKRISHNA PILLAI A L2 | Nizamudeen A L3 | AZEEZKUTTY L1 |
|---|---|---|---|---|---|---|
| 1.00Completion of MCF Building-Civil Works | ||||||
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 582.47 | kg | 168.32 ₹98,042.02 | 172 ₹1,00,185.53 | 164.04 ₹95,549.03 Lowest |
| 1.00 | OD231994/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as
approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating
120 gramsper sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both
side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film
of 25 microns minimumtoavoid scratchesduring transportation and should be supplied in single
length upto 12 metre or as
desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws
ofsize
(5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces,
excludingthe cost of purlins, rafters and trusses and including cutting tosize and shape wherever
required | 49.58 | sqm | 558.99 ₹27,711.93 | 599 ₹29,695.43 | 544.7 ₹27,003.5 Lowest |
| 1.00 | 26.10:Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. | 6.34 | sqm | 5,380.95 ₹34,142.13 | 5,900 ₹37,435.5 | 5,243.43 ₹33,269.56 Lowest |
| 1.00 | 26.9:Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. | 14.1 | metre | 451.32 ₹6,363.61 | 480 ₹6,768 | 439.79 ₹6,201.04 Lowest |
| 1.00 | OD232048/2026-2027:Supplying and fixing superior quality designer/decorate polished PVC door for bath room including frame ,shutter and locking arrangements handle and all other necessary fittings etc. | 3 | each | 3,345.12 ₹10,035.36 | 3,500 ₹10,500 | 3,259.63 ₹9,778.89 Lowest |
Tender Value
₹2.0 L
EMD Value
₹4,897
Closing Date
7 Oct 2026, 6:00 pmClosed
FASEELA BEEVI A
LID AND EW
Annual Plan-Proj No 238/27 Completion of MCF building -General Civil Work
2026_LSGD_874011_30
03/26/AE/LIDEW/MNPY
Open Tender
Civil Works - Roads
Item Rate
120 days
AE LID AND EW MNPLY
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,897
Yes
15 Oct 2026
30 Sept 2026
9 Oct 2026
30 Sept 2026
7 Oct 2026
30 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Completion of MCF Building-Civil Works | |||||
| 1.001 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 582.47 | kg | - | - |
| 1.002 | OD231994/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as
approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating
120 gramsper sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both
side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film
of 25 microns minimumtoavoid scratchesduring transportation and should be supplied in single
length upto 12 metre or as
desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws
ofsize
(5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces,
excludingthe cost of purlins, rafters and trusses and including cutting tosize and shape wherever
required | 49.58 | sqm | - | - |
| 1.003 | 26.10:Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. | 6.35 | sqm | - | - |
| 1.004 | 26.9:Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. | 14.1 | metre | - | - |
| 1.005 | OD232048/2026-2027:Supplying and fixing superior quality designer/decorate polished PVC door for bath room including frame ,shutter and locking arrangements handle and all other necessary fittings etc. | 3 | each | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1485538.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.39 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
BOQ_1485538.xls
BOQ • 0.30 MB
238sbd.pdf
Tender Documents • 2.27 MB
238ft.pdf
Tender Documents • 0.25 MB
238pg.pdf
Tender Documents • 0.26 MB
238aft.pdf
Tender Documents • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .