Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹1.2 L
Closing Date
2 Jul 2026, 6:00 pm3d left
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer, Panchayat R&B Dn. Gandhinagar
CSR Fund Under Union Home Minister - Construction of Community Hall / Yoga Center at (1) Nardipur & (2) Bhadol Ta: Kalol Dist: Gandhinagar. CSR Fund/ Community Hall/ Kalol/ PKG No - 02 (2026-27)
317142
04 of 2026-27/02
Open
Civil - All
Gandhinagar
7 documents required · 7 mandatory
₹3,600
Executive Engineer Panchayat (R & B) Division, Gandhinagar
₹1.2 L
24 Jun 2026
24 Jun 2026
24 Jun 2026
2 Jul 2026
24 Jun 2026
Description of Item Quantity estimated Estimated Total Amount
It. No. (with brief specification and reference to but may be more Unit Rate In according to
book of specifications) or less Figures estimated quantities
Item Excavation for foundation upto 1.5 mt.depth including sorting out and
No stacking of useful materials and disposing of the excavated stuff up to
01 50meter lead (B) Dense or Hard soil
Item Excavation for foundation for depth from 1.5 m to 3.0 m including sorting
No out and stacking of useful materials and disposing off the excavated stuff
02 upto 50 Meter lead.(B) Dense or Hard soil
Item Carring out plinth treatment to post construction / existing structure by
No spraying chemical solution for termite control treatment including labour
03 and material consistment with I.S.I specification. Using Chlordene and
Chiorpurfiles 20 EC. As per 6131_ part- II Consentration Weight one
percent is recommended i.e. one litre 20 EC chemical emulsion dillute with
19 liter give 1 % concentration inclusive of one litre chemical emulsion
appication at the rate of 5 Litre chemical / Sqmt. of surface is
recommended as per I.S.
Item Filling in plinth with sand under floors incl. watering ramming consolidating
No and dressing etc.comp. 135.64 Cum 481.70
Item Filling available excavated Earth (Excluding Rock ) in trench plinth
No side of foundation . in layer not excluding 20 cm in depth consolidation
05 each deposited layer by ramming and watering etc. complete
No 20 cm in thickness including ramming watering and consolidating etc. 835.82 Cum 277.14
06 complete
Item Providing and laying cement concrete1:4:8 (1 Cement : 4 corse sand :
No Machine crushed stone aggregates 40mm nominal size) and curing
07 compelete excluding cost of form work in (A) Foundation and plinth
Item Providing and laying cement concrete work 1: 1.5 :3 (1 Cement : 1.5-
No Coarse sand : 3- graded stone aggregates 20 mm nominal size) and curing
08 complete excluding cost of formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base or columns and Mass
Item Provdg & laying Ordinary cement concrete 1:1.5:3 (1cement : 1.5 coarse
No sand 3 graded stone aggragate 20 mm nominal size) and finishing the
09 smooth with curing etc. complete including the cost of formwok but
excluding the cost of reinforcement for RCC work in (II) COLUMNS (i) 24.66 Cum 11028.20
Having cross sectional area more than 0.08 Sq.M and upto 0.18 Sq.M
Item Providing and laying ordinary cement concreate 1:1.5:3 (1 Cement :
No coarse sand : 3 graded stone aggregates 20mm nominal size) and curing
10 complete Including cost of form work in (i) Beam Having cross-sectional 43.02 Cum 6948.11
area 0.12 Sq.M and upto 0.18 Sq.M
Item Providing and laying cement concrete 1:2:4 (1 Cement : 2- Coarse sand : 4-
No graded stone aggregates 20 mm nominal size) and curing complete
11 excluding cost of formwork in (A) Foundation and Plinth
Description of Item Quantity estimated Estimated Total Amount
Description of Item Quantity estimated Estimated Total Amount
It. No. (with brief specification and reference to but may be more Unit Rate In according to
book of specifications) or less Figures estimated quantities
Item Providing and laying ordinary cement concrete 1:1.5:3 (1-Cement 1.5-
No coarse sand : 3 -graded stone aggregates 20mm nominal size) exposed
12 work with curing etc. complete including the cost of formwork but excluding
the cost of reinforsement for R.C.C work in Slabs having more than13 cm
and up to15 cm.thickness
Item Providing and laying ordinary Cement concrete 1:1.5:3 (1 Cement
No coarse sand 3 graded stone agg. 20 mm nominal size) for RCC lintel
13 including finishing smooth with curing etc. complete includiong the cost of 10.84 Cum 9526.88
formwork but excluding the cost of reinforcement.
Item Provdg & laying cement concrete 1:1.5:3 (1cement : 1.5 coarse sand
No graded stone aggragate 20 mm nominal size) for reinforced concrete
14 chhajjas not exceeding 10 cm. Thickness upto floor two level including
finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 fine
sand) to give a smooth and even surface centering and form work and
curing complete excluding cost of reinforcement.
Item Providing TMT bar FE 500D reinforcement for R.C.C. work including
No bending, binding, and placing in position complete upto floor two level. 24412.00 Kg. 77.29
Item Brick work using common burnt clay building bricks having crushing
No strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement
16 Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional
Item Brick work using common burnt clay building bricks having crushing
No strength not less than 35 kg./ Sq.Cm. in super structure in
17 Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional
Item Half brick masonry in common brunt clay building bricks having
No crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 ( 1-
18 Cement : 4 -coarse sand ) in superstructure above plinth level upto floor 99.90 Sqm 685.79
two level(B) Conventional
Item Provoding and fixing flush door shutters, solid core construction with frame
No of first class hardwood with cross board and face veneer or plywood face
19 panels , including anodised alluminium butt hinges with necessary screws.
including Laminated sheet 1 mm thick,S.S. stoper 30cm long ASIS
grade,S.S. Aldrap 30cm long ASIS 304 grade,S.S. Handle 15cm long ASIS
304 grade,S.S. Handle Door stop ASIS 304 grade(2) 35 mm thick.
Item Providing and fixing window having extruded aluminum Colour anodized
No section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /
20 Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @
wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm
@ wt.of 0.659 Kg/mt with sliding shutters of horizontal member size 40mm
x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x
18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick 42.30 Sqm 1713.70
transparent bronze colour tinted float glass with powder coated aluminum
fittings and fixtures and transparent silicon sealant glass fixing to frame as
per details etc complete for window.
Item Providing and fixing standared extruded of alluminium section of size 63mm
No x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated
21 alluminium frame for ventilation with 5 mm thick frosted glass as details etc 7.20 Sqm 1175.56
complete for Ventilation
Description of Item Quantity estimated Estimated Total Amount
Description of Item Quantity estimated Estimated Total Amount
It. No. (with brief specification and reference to but may be more Unit Rate In according to
book of specifications) or less Figures estimated quantities
Item Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP
No shutter with wood grain raised panneled design finish shutter having extra
22 reinforcement on sides & edges in Gel coat finish. The core of the shutter &
frame is to be filed up with injected polyurethene foam done in situ along
with embedded wood enpieces for stiffening & also taking hinges &
fintures. The whole FRP frame & shutter is to be waterproof
weatherproof,termiteproof & resistance to mild acid/alkali.Rates are to be
inclusive of S.S hinges with fastener sleeve & alluminium fixtures &
fastenings.
Item Providing 15mm thick cement plaster in single coat on brick/concrete walls
No for interior plastering upto floor two level and finished even and smooth
23 in. (ii) Cement mortar 1:3 (1-cement :3-sand) up to floor two level.
Item Providing 10mm thick cement plaster in single coat on ceilings and sofits of
No stairs for interior plastering upto floor two level and finished even and
24 smooth in (i) Cement mortar 1:3 (1-cement: 3-sand) for Ground Floor
Item 20mm thick sand faced cement plaster on walls upto height 10 metres
No above ground level consisting of 12mm thick backing coat of C.M. 1:3
25 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-
cement : 1-sand) etc.complete. as directed including cost of 12mm x 1029.12 Sqm 315.69
12mm size grooves to be created as shown in drawing for
completed items of work.
Item Wall and ceilling painting (Two Coats) including primer & putty) with
No plastic emulsion paint of approved brand and manufacture on
26 undecorated wall surface to give an even shade including throughly
brushing the surface free from mortar droppings and other foreign
matter and sand papered smooth.
Item Finishing wall with weather proof exterior emulsion paint on wall
No surface (two coats) to give an required shape even shade after thoroughly
27 brushing the surface to remove all dirt, and remains of loose powdered 1029.12 Sqm 120.26
materials etc complete
Item Providing and laying Vitrified tiles 8 to10 mm thick ,36'' x36'' in flooring
No treads of step sand landing laid on a bed of 12mm thick cement mortar 1:3
28 (1 cement : 3-coarse sand ) finishing with flush pointing in white cement.
Item P & L 24"x24" vitrified 8mm thick tile flooring over 20mm(average) base of
No cement mortar 1:6 ( 1 cement:6 coarse sand) on new surface or fixing on
29 existing flooring by adhesive material including dismentaling of existing
flooring and jointed with color cement slurry including finised with flush 73.34 Sqm 1467.72
pointing & cleaning the surface etc. complete for antiskit
Item Providing and laying Vitrified tiles 8 to10 mm thick ,in skrting risers of steps
No and dedo on 10 mm thick cement plaster 1:3 (1-cement :3-coarse sand)
30 and jointed with white cement slurry
Item Providing and fixing machine cut, free edges, mirror polished Granite stone
No slab 18 mm thick for vertical wall/ Doors/ Windows Sill, Jams for cladding
31 as per design including full moulded round inside edge and laid on 10 mm
thick cement mortar 1:3 ( 1 cement: 3 coarse sand) jointed with grey 174.64 Sqm 2660.46
cement slurry including rubbing and polishing finishing etc. complete.
Description of Item Quantity estimated Estimated Total Amount
Description of Item Quantity estimated Estimated Total Amount
It. No. (with brief specification and reference to but may be more Unit Rate In according to
book of specifications) or less Figures estimated quantities
Item Providing and laying broken china mosaic flooring for Terrece using 12mm
No to 20mm of broken piece of glazed tiles to be laid over cement mortar
32 bedding of CM (1:3) to plain or slope & to be tempered to bring Mortar
cream out upto surface using white cement including rounding off junction 67.88 Sqm 779.70
and extending them up to 15 cm along the wall clearing water and oxalic
acied etc as directed
Item Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe
No ( SCH- 40) for cold water including fittings as approved by Engineer In
33 Charge. Pipe shall be fixed on the wall with the help of clamp at every two
metre C/C or shall be concealed as directed including necessary fittings 70.00 Rmt 148.12
etc. including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
Item Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe
No ( SCH- 40) for cold water including fittings as approved by Engineer In
34 Charge. Pipe shall be fixed on the wall with the help of clamp at every two
metre C/C or shall be concealed as directed including necessary fittings 150.00 Rmt 91.84
etc. including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials
Item Providing laying and jointing in true line and level 15mm dia. U.P.V.C.
No Pipe ( SCH-40) for cold water including fittings make as approved by
35 Engineer In Charge. Pipe shall be fixed on the wall with the help of
clamp at every two metre C/C or shall be concealed as directed
including necessary fittings etc. including testing of pipe and joints
and fixing the same with adhesive solvent, including cost of all materials
Item Providing and fixing to wall ceiling and floor 10.0 Kg. /Kcm2 working
No pressure polythene pipes of the following outside Dia. Low densidy,
36 complete with special falnge compression type fittings, wall clips etc. 200.00 Rmt 339.05
including making good the wall ceiling and floor.(G) 110mm
Item Providing, laying and jointing in true line and level 160 dia U.P.V.C (Type
No B) conforming to IS 13592-1992 with one end plain and other end socketed
37 with rubber ring, & fittings conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size
160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm
center to center or shall be concealed in walls as directed including
necessary fittings such as bends, shoes etc. including testing of pipes and
joints and jointed with adhesive solvent cement including cost of all
materials.
Item Providing and fixing cast iron (Spun) Nahni trap of the following
No nominal diameter of self cleaning design with C.I. screaed down or
38 higned grating including cost of cutting and making good the walls 40.00 Nos. 885.25
and floor 100mm inlet and 50mm outlet. (C) 100mm
Item Providing and fixing wash down water closet (European type, W.C.
No Pan) with integral P or S trap including jointing the trap with soil
39 pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) including Seal 16.00 Nos. 3948.87
and cover (A) Vitreous China
Description of Item Quantity estimated Estimated Total Amount
Description of Item Quantity estimated Estimated Total Amount
It. No. (with brief specification and reference to but may be more Unit Rate In according to
book of specifications) or less Figures estimated quantities
Item Providing and fixing wash basin with single hole for pillar tap with
No C.I. Or M.S. brackets painted with including cutting holes and making
40 good the same including fittings, (fixing C.P brass waste 32 mm dia),(
fixing M.I. fisher union 32 mm dia),(fixing pillar tap,cap stan head , screw
down high pressure with screws, shank sand back nuts. 15mm dia), (fixing
brass screw down stop tap15mm dia), (fixing Rubber plug) (A) Vitreous
China (ii) Flat back wash Basin 550mm x 400mm size (i) in white colour
Item Providing and fixing Urinal or approved quality including conecting the
No Urinal with waste pipe trap etc. complete. (A) White earthenware flat
41 back or corner type size 430mm x 260mm x 350mm.
Item Providing and fixing 600mm x 450mm bevelled edge mirror of superior
No glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to
42 wooden pluge with C.P.brass screws and washers.
Item Providing erecting fixing double coated Syntex of Equivalent PVC (ISI)
No Mark Water Tank of Required Capaicty each with all necessary fitting &
43 connection etc. complete on Terrace.
Item Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A)
No 100mm dia. Each 4.00 Nos. 282.16
Item Providing and fixing C.P. brass towel rail complete with C.P.brass brackets
No fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size. 8.00 Nos. 616.42
Item Providing and fixing C.P. Bib cock 15 mm Heavy duty with cap
No 40.00 Nos. 400.58
Item Providing and fixing C.P. Angle stop cock 15 mm Heavy duty with cap
No 30.00 Nos. 407.42
Item Providing and fixing Gun metal check or non-return fullway wheel valve.(C)
No 25mm dia. 12.00 Nos. 420.63
Item Providing and fixing Gun metal check or non-return fullway wheel valve.(E)
No 40mm dia. 8.00 Nos. 663.43
Item Providing and constructing soak pit of size 2.46mt. outer and 6.0mt. deep
No including 23cm thick brick masonary for top 0.75mt. height solid masonary
50 in cement mortar 1:6 and remaining honey combed masonry in cement
mortar 1:6 and covered with jodhpuri patti C.I. pipe 100mm dia 1.8mt. long 2.00 Nos. 42670.65
etc. comp. as directed including 15mm plaster in C.M. 1:4 over jodhpuri
Item Providing and fixing ball cock of approved. Quality as directed. (A) Copper
No Metal (ii) 50mm dia. 8.00 Nos. 189.84
Item Providing and fixing S.W. gully trap with C.I. grating brick masonry
No chamber and 300mm x 300mm size (inside) with standard weight. (i)
52 Square mouth traps. (B) 150mm x 100mm size Pof R type
Description of Item Quantity estimated Estimated Total Amount
Description of Item Quantity estimated Estimated Total Amount
It. No. (with brief specification and reference to but may be more Unit Rate In according to
book of specifications) or less Figures estimated quantities
Item Constructing brick masonry chamber for underground C.I.
No Inspection chamber and bends with briocks having croshing strength not
53 less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)
455mm x 610mm intenal dimensions, total weight of cover with frame to
be not less than 38 Kg. (Wt.of cover 23 Kg) (R.C.C. top slabe with
'1:2:4mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm
size) foundation concrete 1:5:10 inside plaster 15mm thick with
cement mortar 1:3 finished smooth with a floating coat of neat cement on
walls and bed concrete etc. complete. (i) Inside dimensions 455mmx
610mm and 450mm deep for single pipe line.
Item Providing and fixing 90 cm high Stainless Steel railing made from
No anticorrosive 304 grade S.S. pipe of 50 mm dia (16 gauge) as hand rail with
54 S.S. 304 grade baluster of 32 mm dia (16 gauge) as a vertical support fixed
in RCC slab / steps of stair at 1.2 Mt. c/c including three horizontal S.S.
pipes of 16 mm dia (16 Gauge) at equal distance fixed by 16 mm dia (16 18.00 Rmt. 3184.58
Gauge) S.S. pipe with baluster including accessories as per detailed
drawing as directed etc. complete.
Item Providing and fixing Safety Grills of required pattern for windows/ door
No using M.S. polished bars, Rectangular CRC Pipes of size 50mm x 30mm x
55 2mm or Required at required spacing as per design and hold fast with
coach bolts including one coat of primer and two coats of matt finished oil
painting etc. complete.
Item Construction of an under ground masonry water tank of size 2.00 m X
No m X 1.50 m = 6000 litre capacity as per the approved drawing & design etc. 12000.00 Litre 12.47
56 complete.
Item Providing, Fixing, Installation of Self Supported Galvalume Roofing with
No proper overlapping and seaming between different sheets without making
57 holes or preventing the overturning of roof by wind addition made up from
superior quality, structural grade steel. Base metal width 912 mm with
tolerance of +/- 4 mm, Steel Grade : Grade D Regular Modified Polyster
Imported Color Coated Galvalume Steel having Profiled width of 625 mm +/-
10 mm. Design, supply, & fabrication of self supported single span arch
roof fabricated from mechanically seamed to profiles of Galvalume Cold 850.00 Sqm 2628.02
Rolled Structural Steel coils as per standard ASTM A792, Steel Sheet,
Aluminum-Zinc Alloy Coated by Hot-Dip Process. The work should be
carriedout by specilialize and approved agency only. The rate of item is
including fitting as per standerd specification.
Item Providing and fixing of hangers/ clamps as per requirement for laying of
No cables and hanging of bulbs from Self Supported Proflex Systems Roofing. 300.00 Nos. 214.12
Description of Item Quantity estimated Estimated Total Amount
Description of Item Quantity estimated Estimated Total Amount
It. No. (with brief specification and reference to but may be more Unit Rate In according to
book of specifications) or less Figures estimated quantities
Item Providing & fixing number plate of marble stone of required size set in C.M.
No 1:4 Including finishing and engraving letter etc. complete 10.00 Nos. 306.14
TOTAL ₹
Rupees One Crores Twenty Two Lacs Ninety Five Thousand Three Hundred Seventy Three and Forty Paisas Only
I / We / am / are willing to carry out the work at________________________________% above / below percent (should be written in
figure and words) of the estimated rates mentioned above. Amount of my / our tender Works out as under.
Estimated Amount Estimated Amount
put to tender Rs. _________ put to tender Rs. _________
Deduct_______% below Add_______% above
Net Rs._________ Net Rs._________
in words ___________ in words ___________
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra
payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of
difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
5 Credit amount of Rs. 0.0 Shall be recovered from the running bill in which dismantle item will be recorded for payment.
6 For Routine Maintenance, the unit rate indicated by the Authority shall apply. The Bidder is required to accept these rates. Further, the payment
shall be performance based As per BOQ Part-B.
Signature of contractor
Deputy Executive Engineer Executive Engineer
Road Project Sub Division R & B Panchayat Division
Jilla Panchayat Gandhinagar Gandhinagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1 SBD Community Hall Ta Kalol PKG 02.pdf
1 Schedule B Community Hall Ta Kalol PKG 02.pdf
1 Special Condition of work.pdf
1 Specification Community Hall Ta Kalol PKG 02.pdf
1 Testing Schedule Community Hall Ta Kalol PKG 02.pdf
2 Drawing Community Hall Plan.pdf
2 Drawing Community Hall Section.pdf
3 Building Specifications _Booklet_.pdf
3. GR to be attached with DTP_SBD_with Index.pdf
Download all tender documents and submit your bid