MAINTENANCE / REPAIRS AND RECANNING TO CERTAIN STEEL FURNITURE AT AFS BIDAR

Almirah Large Steel :-FD-1031 :-Removing Dents and Bends and welding wherever required for Almirah Large Steel:- Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosol spray. Preparation of almirah surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint . Colour :- Royal blue/Airforce blue colour for entire almirah and half white colour for doors (front side). As per sample kept in BSO office and as directed by Engg-in-Charge. Make for paint:- Asian / Berger / Nerolac Note :- Almirah as a whole shall be measured as single unit.

Removing the existing U/S damaged shelf from almirah large steel and S & F shelf made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint as specified in Sl No 01 , over a coat of red oxide primer complete all as directed By Engg-in-charge. Note:- Each shelf will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco. Make for paint:- Asian / Berger / Nerolac

Removing the existing U/S damaged Leg from almirah large steel and S & F Leg made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint as specified in Sl No 01 , over a coat of red oxide primer complete all as directed By Engg-in-charge. Note:- Each Leg will be measured as one unit. Make for sheet :- RINL / SAIL / Tisco. Make for paint:- Asian/Berger/Nerolac

Almirah Medium Steel :-FD-1032 :-Removing Dents and Bends and welding wherever required for Almirah Medium Steel:- Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of almirah surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint . Colour :- Royal blue/airforce blue colour for entire almirah and half white colour for doors (front side). As per sample kept in BSO office and as directed by Engg-in-Charge . Make for paint:- Asian/Berger/Nerolac Note :-Almirah as a whole shall be measured as single unit.

All As per Item No 1.01 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge

All As per Item No 1.02 above but Almirah Medium Steel .Complete all as directed by Engg-in-Charge

Removing the unserviceable locks from Almirah and S&F new steel locks (6 lever brass) for Almirah large/Med steel of approved quality with duplicate keys all as directed by Engg-in-charge Make :-Godrej/Sheel/Harrison.

Removing and replacing unserviceable handle with new 100 mm chromium plated handle of approved quality for Almirah large/Med steel all as directed by Engr-in-charge. Make : Godrej/Sheel.

Book Case Steel:- FD-1028 Repairs and removing of dents and bents of Book case steel including repair of sliding arrangements for book case and scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of book case steel with two coats of synthetic enamel paint . colour :- Royal blue/airforce blue colour for entire book case and half white colour for glass doors (front side) and as directed by Engg-in-Charge and approved by GE Make for paint:- Asian/Berger/Nerolac Note:- Each book case shall be measured as one unit.

Removing and replacing the broken glass with 3mm thick new plain glass and packing wherever required to make the item intact and to avoid loose fittings .Make of Glass:- Modiguard/saintgobain/pilkington . Note:-Each Glass shall be measured as a single unit.

Removing and replacing unserviceable handle with new bow handle of 75mm size steel chromium plated with suitable screws all as directed for one shutter of book case steel as per sample as approved by Engg-in-Charge

Removing the unserviceable locks and S&F new steel lock (6 lever brass) of approved quality with duplicate keys complete all as directed by Engg-in-Charge. Make : Godrej/Sheel/Harrison.

Repair of Chair Verandah FD-359 Re-canning of chair varandah after removing the existing cane and to carry out necessay welding and repair if required and painted with sy enamel white paint two coats and weaving with new white plastic cane of approved quality with 4mm wide half round type for seat and back all as ordered as per pattern shown on drg and all as specified including fixing of 4 Nos, hard rubber shoes of 20 mm dia (black colour) to each chair verandah and as directed by Engg-in-charge. Note:- Cane shall be of plastic strips of superior quality, type-I,(HDPE) white or cream as directed by Engineer-In- Charge of uniform width conforming to IS-5387. Make of cane plastic : Maharastra/Godrej/Shah & Shah

Locker Bed Side Steel Sk-867,FD-257,FD-1029,FD-127(M) Removal of complete dents filling with putty including preparation of old painted surfaces and applying one coat synthetic enamel paint of approved shade by spray painting for internal and external surfaces complete all as specified and as directed. Note :-Locker bed side as a whole shall be measured as single unit.

Removing the existing U/S damaged shelf from Locker bed side steel and S & F new shelf made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint over a coat of red oxide primer complete all as directed By Engg-in-charge. Note:- Each shelf will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco.Make for paint:- Asian/Berger/Nerolac

S&F new Aluminium Hasp & Staple fixing with suitable machine screws including removal of existing unserviceable Aluminium Hasp & Staple of any description in any position complete all as specified and directed.

S&F new chromium plated handle 75mm long fixing with suitable nut/pins including removal of existing unserviceable handle complete all as specified and directed.

Removing the existing U/S damaged Leg from a Locker bed side steel and S & F new leg made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint over a coat of red oxide primer complete all as directed By Engg-in-charge. Note:- Each shelf will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco.Make for paint:- Asian/Berger/Nerolac

Locker Steel (PLU/VPLU) Single Door Locker:- Removing Dents and Bends and welding wherever required for Locker Steel (PLU) :- Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of locker surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint . Colour :- As directed by Engg-in-Charge .Make for paint:- Asian/Berger/Nerolac Note :-Locker Steel as a whole shall be measured as single unit.

Removing the existing U/S damaged shelf from Locker Steel (PLU) and S & F shelf made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint as specified , over a coat of red oxide primer complete all as directed By Engg-in-charge. Note:- Each shelf will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco.Make for paint:- Asian/Berger/Nerolac

Locker Steel 6 Unit (FD-127M):- Removing Dents and Bends and welding wherever required for Locker Steel 6 unit Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of locker surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint . Colour :- As directed by Engg-in-Charge .Make for paint:- Asian/Berger/Nerolac Note :-Locker Steel as a whole shall be measured as single unit.

Removing the existing U/S damaged shelf from Locker Steel 6 unit and S & F shelf made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint as specified , over a coat of red oxide primer complete all as directed By Engg-in-charge. Note:- Each shelf will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco.Make for paint:- Asian/Berger/Nerolac

Removing and replacing unserviceable handle with new 75 mm chromium plated Bow handle of approved quality for locker steel unit all as directed by Engr-in-charge. Make : Godrej/Sheel.

Removing the existing U/S damaged Leg from Locker steel 6 unit steel and S & F Leg made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint as specified , over a coat of red oxide primer complete all as directed By Engg-in-charge. Note:- Each Leg will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco.Make for paint:- Asian/Berger/Nerolac

Locker Steel 4 Unit (FD-127M):- Removing Dents and Bends and welding wherever required for Locker Steel 4 unit Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray.Preperation of locker surfaces after applying putty and red oxide primer and spray painting of almirah with two coats of synthetic enamel paint . Colour :- As directed by Engg-in-Charge .Make for paint:- Asian/Berger/Nerolac Note :-Locker Steel as a whole shall be measured as single unit.

Removing the existing U/S damaged shelf from Locker Steel 4 unit and S & F shelf made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint as specified , over a coat of red oxide primer complete all as directed By Engg-in-charge. Note:- Each shelf will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco.Make for paint:- Asian/Berger/Nerolac

Removing and replacing unserviceable handle with new 75 mm chromium plated Bow handle of approved quality for locker steel unit all as directed by Engr-in-charge. Make : Godrej/Sheel.

Removing the existing U/S damaged Leg from Locker steel 4 unit steel and S & F Leg made out of MS sheet, 1 mm thick, bent to shape as required, welding, etc including preparing the new steel and iron surfaces and applying, two coats of Synthetic enamel paint as specified , over a coat of red oxide primer complete all as directed By Engg-in-charge. Note:- Each Leg will be measured as one unit. Make for sheet :- Rinl /Sail / Tisco.Make for paint:- Asian/Berger/Nerolac

Repairs to Table Clerk Steel:-FD-84(M), FD-1004 Removing the existing unsv table tops of table office clerk steel and S&F new table top with 18mm thick pre-laminated particle board, with one face decorative laminate and other balancing white, exterior grade, ISI Marked, duly fixed with 20 /19mmx 4mm thick teak wood, half round beading, duly polished, glossy finish, all round, etc complete, all as directed all as directed. Make : Eco Bd /Bhutan Bd/Novapan/Anchor.

Removing the unserviceable locks and S&F new steel lock (6 lever brass) of approved quality with duplicate keys all as directed by Engr-in-charge for table office officer/table office clerk steel. Make : Godrej /Sheel/Harrison

Removing the UNSV drawer from table and supply and fix new drawer made out of 1mm thick MS sheet made to shape, welding etc, including preparing the new steel and iron surfaces and applying, two coats of smoke grey synthetic enamel paint, first quality, over a coat of red oxide primer all as per drg and as directed by Engr-in-Charge. Note:- Each drawer will be measured as one unit. Make for sheet :- Sail /Rinl/Tisco Make for Paint/Asian/berger/Nerolac.

Removing of complete dents filling with putty including preparation of old painted surfaces and applying one coat synthetic enamel paint of approved shade by spray painting for internal and external surfaces including replacement of hard rubber shoes with suitable screws complete all as directed.

Repairs to Table office officer Steel:-FD-84(M), FD-1004 Removing the existing unsv table tops of table office clerk steel and S&F new table top with 18mm thick pre-laminated particle board, with one face decorative laminate and other balancing white, exterior grade, ISI Marked, duly fixed with 20 /19mmx 4mm thick teak wood, half round beading, duly polished, glossy finish, all round, etc complete, all as directed all as directed. Make : Eco Bd /Bhutan Bd/Novapan/Anchor.

Removing the unserviceable locks and S&F new steel lock (6 lever brass) of approved quality with duplicate keys all as directed by Engr-in-charge for table office officer/table office clerk steel. Make : Godrej /Sheel/Harrison

Removing the UNSV drawer from table and supply and fix new drawer made out of 1mm thick MS sheet made to shape, welding etc, including preparing the new steel and iron surfaces and applying, two coats of smoke grey synthetic enamel paint, first quality, over a coat of red oxide primer all as per drg and as directed by Engr-in-Charge. Note:- Each drawer will be measured as one unit. Make for sheet :- Sail /Rinl/Tisco Make for Paint/Asian/berger/Nerolac.

Table Dining ORs FD-165/1009. :-Removing the unserviceable table top & supply and fix new prelaminated particle board,with one face decorative laminate and other balancing white, exterior grade, ISI Marked, of size, 18mm thick duly fixed with 4mm thick teak wood beading around the table top duly french polished, glossy finish,etc complete all as directed by Engg-in-Charge. Make :Bhutan bd/Eco Bd / Novapan / Anchor. Note :-Table Dining ORs as a whole shall be measured as single unit.

Repair of Shoe Rack Steel S&F of shoe rack steel removing the existing unsv 4" square net made out of 6mm round MS rod and to carry out necessary welding and repair if required and painted with synthetic enamel black paint two coats over a coat of red oxide primer all as specified including fixing of 4 Nos, hard rubber shoes of 20 mm dia (black colour) to each Shoe rack and as directed by Engg-in-charge. Make for paint:- Asian/Berger/Nerolac

All as per item No.17.00 above but, Teapoy varandha FD-383

All as per item No.17.00 above but, Rack Pigeon Hole (18 Hole) FD-108

All as per item No.17.00 above but, Rack Steel (GE/FD/40/06)

All as per item No.17.00 above but, Stool 2 feet height Steel (FD-81)

All as per item No.17.00 above but, Table Dining ORs FD-165/1009

All as per item No.17.00 above but, Charpoy IP Folding FD 388 (R)