SPL REPAIR TO ROADS NEAR ADM BLOCK AND SPL REPAIR TO BLACK TOP SURFACING OF ROAD AND ROAD FURNITURE IN FRONT OF OFFR MESS ,QUARTER GUARD AND MAIN OFFICE IN ARMY AREA OF AGE B/R-II UNDER GE (ARMY) NO 1 JODHPUR

Amount

M&L for Repair to potholes not exceeding 1.0sqm each, depth exceeding 30mm, including sweeping free from dust & mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surface in area exceeding 400sqm, exceeding 50mm but not exceeding 100mm deep and removing the unserviceable materials/ debeirs not exceeding 50m and dispose off complete all as specified and directed

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with paving bitumen VG-10 grade at the rate of 5.0Kg per 10Sqm complete all as directed and specified.

M&L for laying premixed bituminous macadam (using binder not less than 4% by weight of total mix) rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using VG-30 paving bitumen, complete all as specified and as directed.

M&L for bituminous premix semi dense asphaltic concrete, 30mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG-30 grade mixed in computerized hot mix plant and laid with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller complete all as directed and specified.

M&L for 40mm thick open graded premixed carpeting using waste plastic coated aggrgates and VG-30 grade bituminous binder as per IRC SP 98-2013, (40mm thick, 10 Sqm carpeting composed of 0.36 cum of 13.2mm graded stone aggregate & 0.18 cum of 11.2mm gaded stone aggrgate pre heated to required temprature and mixed/coated with 2.336kg of shredded plastic (wate processed plastic at 8% by weight of bitumen) and finally mixed with 26.864kg of bituminous binder (ie., 92% by weight of standard bitumen quantity)) mixed in hot mix plant and laid with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller complete all as directed and specified.

M&L for preparing bituminous road surfaces and marking 2.5mm thick center lines, stop lines, dashes, arrows, letters etc and the like not exceeding 10cm width, with hot applied Thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F in repair Road safety polycarbonate convex traffic mirror 900mm dia, encased in ABS materials, highly visible orange colour/visor for outdoor type, weather proof, brackets with horizontal and vertical angle adjustment fixed in and including 2.10m high and 75mm dia GI pipe as stand, fixed in ground with 60cm x60cm x75 cm PCC block with cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and including necessary form work, earth work excavation, removal of excess soil etc., complete all as specified and directed.

S&F in repairs Solar cat eye aluminum alloy shell (100% water proofing design according to IP65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) and consisting of super bright LED with 10,000 to 18,000 mcd fixed with and including MS stud of suitable size as per manufactures instructions etc. including taking out old unserviceable one complete all as specified and directed

S&F in repairs Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions including taking out old unserviceable one complete all as specified and directed

S&F in repairs metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomeric 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in 150x150x300mm size PCC 1:2:4, type B1using 20mm graded stone aggregate, necessary form work, earth work etc., complete all as specified and directed

S&F in repairs Speed breakers (Road bump) made of ABS plastic, of size 250x350x50mm per piece with reflectors on either side of each piece fixed on road surface with appropriate nos of mild steel pins and epoxy adhesive complete all as per manufactures instructions complete all as specified and directed.

Manufacturing, supplying and fixing Retro reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge

Manufacturing, supplying and fixing Retro reflective /Identification sign/ Cautionary / warning sign board of size 60x90cm rectangular shape with 1.5 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01, backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of stainless steel of size 25x25mm and mounted and fixed to a vertical post made of 40 mm dia stainless steel pipe (SS 304 grade) of height 3.00m from natural ground level to top 0.5m embedded in ground with 45cm x45cm x60cm PCC block with cement concrete 1:2:4 type B2 using 40mm graded stone aggregate and including necessary form work, earth work excavation, removal of excess soil to a distance not exceeding 50m etc., complete as per drawing , specification and direction of Engineer-in-charge

M&L for approved moorum/ Red Bajri filling, laying, spreading even, watering, compacting and finishing as in road berms alongwith paved roads including necessary surface excavation complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregate as in sub base to floors including demolition of old cement concrete pavements/suib base complete all as specified and directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for sand stone edging/kerb of roughly squared stone size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush including demolition of old stone of any discription etc complete all as specified and directed

M&L for preparation of new concrete surfaces and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed

ABHOG INFRASTRUCTURE PRIVATE LIMITED

D DEV COMPANY