Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.7 LAccepted-AOC | ₹25.7 L Quoted ₹25.8 L | L1 | Accepted-AOC L1 |
| 2 | L2₹27.8 L+₹2.0 L (7.82%)Rejected-Finance 70 VARDHMAN NAGAR A P O SHYAM NAGAR AJMER ROAD JAIPUR PIN 342019 | JAIPUR | 342019 | ₹27.8 L+₹2.0 L (7.82%) | L2 | Rejected-Finance REJECTED DUE TO L2 |
| 3 | L3₹29.0 L+₹3.3 L (12.7%)Rejected-Finance 205 2ND FLOOR VIPUL SQUARE B BLOCK SUSHANT LOK 1 GURGAON HARYANA 122002 | GURUGRAM | HARYANA | 122002 | ₹29.0 L+₹3.3 L (12.7%) | L3 | Rejected-Finance REJECTED DUE TO L3 |
Tender Value
Refer Docs
EMD Value
₹68,500
Closing Date
28 Sept 2021, 6:00 pmClosed
GE SHIKARGARH
Military Engineer Services, Garrison Engineer, Shikargarh, Near ASC Supply Depot, Ratanada Jodhpur-342011
COMPREHENSIVE MAINTENANCE OF MECHANICAL LAUNDRY, STEAM BOILER, ETP AND OTHER CONNECTED EQUIPMENTS INSTALLED AT MH JODHPUR
2021_MES_468465_2
8713/05/E8 29
Open Tender
Miscellaneous Works
Item Rate
335 days
GE SHIKARGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE SHIKARGARH
₹68,500
Yes
12 Nov 2021
13 Sept 2021
30 Sept 2021
13 Sept 2021
28 Sept 2021
13 Sept 2021
Amount
Sch-A Sec-I (Compehensive annual maintenance)
Compehensive annual maintenance/servicing/repairing including replacement of minor parts such as nuts, bolts, washers, oil grease etc other than major parts as mentioned in subsequent items 2.01 to 7.22 for following laundry equipments of make Fabcare Delhi and all as directed by Eng-in-charge (a) Washing Machine 50 Kg Make:- Fabcare -01 nos (b) Sluicing Machine 25 Kg Make- Fabcare-02 Nos (c) Hydro Extractor Machine 25 Kg Make-Fabcare- 02 nos (d) Drying Tumbler Machine 30 Kg Make-Fabcare-02nos (e) Flat Work Ironer 800 mm x 3000 mm Make- Fabcare-01 nos (f) Flat bed press 750 mm x 1500 mm Make- Fabcare-02 nos (g) Bulk Mattress sterilizer 50 Kg Make- Fabcare-01 nos (h) Dry Linen Trolley-02 Nos (j) Wet Linen Trolley-03 Nos (k) Mobile Table-01 Nos (l) Single Sink-01 Nos Note:- (i) Make and size of various spare parts if not given shall be as per existing. (ii) Spares required for replacement will be measured and paid seperatly as per actual as listed in Sch-A Section -II for each machine. However laundry will dismantelled in the presence of rep of Engineer-in-Charge.
Sch-A Section -II Supply only following spares for drying tumbler 30Kg Make Fabcare
Steam Heating Coils Copper Tube Alu. FINS Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
Main Drive V.Belts Suitable for drying tumbler 30Kg of Make Fabcare /Continental /ISI Marked
Main Idler V.Belts -Suitable for drying tumbler 30Kg of Make Fabcare/Continental /ISI Marked
Steam Trape suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
Bye Pass Assembly S.S. Ball valves itable for drying tumbler 30Kg of Make Fabcare Make-Leader/Venus/Sant/BIR
Automatic Steam inlet valve 50mm Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare ,ISI Marked
Main Drive 2 Bearing + 2 pcs Sleeves Suitable for drying tumbler 30Kg of Make Fabcare , Make-NBC/SKF/IKO/NTN
Main IDLER Bearing Suitable for drying tumbler 30Kg of Make Fabcare , Make-NBC/SKF/IKO/NTN
Pneumatic Pipes & Fittings Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
Alu. Blowers for Suction Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
Glass with rubber Packing and S.S. screws Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
Rubber Packing for lint screen Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
Door Latches for lint screen Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
Door Limit Switch Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
MCB 40AMP TPN Make- Legrand/Havells/Crompton/L&T
Timer 0 - 60 Make-Legrand/L&T/Schnideler/Seimens
Timer Rev - Fwd Make-Legrand/L&T/Schnideler/Seimens
Contactor 415V TPN Make-Legrand/L&T/Schnideler/Seimens
MPD Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
DTC (Digital Temp. Controller) Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
Thermo Couple Suitable for FABCARE Make drying tumbler 30Kg of Make Fabcare
Push Button Green Make- Seimens/L&T/AE/BCH/C&S
Ind. Light Make-Seimens/L&T/AE/BCH/C&S
Red push button Make- Seimens/L&T/AE/BCH/C&S
Supply only following spares for flat bed press 750mm x1500mm Make-Fabcare
FLOW CONTROL VALVE 1/2"Make- JANATICS/Danfoss/Indfos/L&T/Seimens
SOLENOID VALVE 1/2" Make- JANATICS/Danfoss/Indfos/L&T/Seimens
HEATER suitable for FABCARE Make flat bed press 750mm x1500mm
SILENCER 1/2"suitable for FABCARE Make flat bed press 750mm x1500mm
SILENCER WITH FLOW CONTROL suitable for FABCARE Make flat bed press 750mm x1500mm
G.I.C. TIMER suitable for FABCARE Make flat bed press 750mm x1500mm
SPRING FLAT BED PRESS MAIN FOR FLAT BED PRESS suitable for FABCARE Make flat bed press 750mm x1500mm
CONTACT BLOCK 1NO+1NC suitable for flat bed press 750mm x1500mm Make-Fabcare Make-L&T/Seimens/Legrand/ABB/ISI Marked
CONTACT BLOCK 2NO+2NC suitable for flat bed press 750mm x1500mm Make-Fabcare Make-L&T/Seimens/Legrand/ABB/ISI Marked
CONTACTOR 9A suitable for flat bed press 750mm x1500mm Make-Fabcare Make-L&T/Seimens/Legrand/ABB/ISI Marked
CONTACTOR 18A suitable for flat bed press 750mm x1500mm Make-Fabcare Make-L&T/Seimens/Legrand/ABB/ISI Marked
CONTACTOR 25A suitable for flat bed press 750mm x1500mm Make-Fabcare Make-L&T/Seimens/Legrand/ABB/ISI Marked
CONTACTOR 32 A suitable for flat bed press 750mm x1500mm Make-Fabcare Make-L&T/Seimens/Legrand/ABB/ISI Marked
CONTACTOR 40 A suitable for flat bed press 750mm x1500mm Make-Fabcare Make-L&T/Seimens/Legrand/ABB/ISI Marked
DOOR GASKIT suitable for flat bed press 750mm x1500mm Make-Fabcare Make-L&T/Seimens/Legrand/ABB/ISI Marked
FRL 1/4 suitable for FABCARE Make flat bed press 750mm x1500mm Make-Fabcare
FRL 1/2" suitable for FABCARE Make flat bed press 750mm x1500mm Make-Fabcare
INDCATING LIGHT Make-Seimens/L&T/AE/BCH/C&S
INDCATING LIGHT CLEAR Make-Seimens/L&T/AE/BCH/C&S
LIMIT SWITCH Make-Seimens/L&T/AE/BCH/C&S
MPD 0-10 suitable for FABCARE Make flat bed press 750mm x1500mm Make-Fabcare
MPD 7-20 suitable for FABCARE Make flat bed press 750mm x1500mm Make-Fabcare
PNEUMATIC ACTUATOR FITTED BUTTER FLY VALVE 2" ROTEX/SIR/L&T/AUDCO
PRESSURE SWITCH Make-Indofos/Danfos/SWITZER
PUSH BUTTON Make- Seimens/L&T/AE/BCH/C&S
REVERSING TIMER ANALOG TYPE Make-Legrand/L&T/Schnideler/Seimens
SINGLE SOLENOID VALVE 1/4 Make- JANATICS/Danfoss/Indfos/L&T/Seimens
SS CASTING BALL VALVE FOR STEAM INLET 1/2"Make-Leader/Venus/Sant/BIR
SS CASTING BALL VALVE FOR STEAM INLET 3/4"Make-Leader/Venus/Sant/BIR
TEMPRATURE METER 72 X 72 Make-Seimens/L&T/AE/BCH/C&S
THERMO COUPLE 3MTR suitable for FABCARE Make flat bed press 750mm x1500mm Make-Fabcare
THERMO COUPLE 5MTR suitable for FABCARE Make flat bed press 750mm x1500mm Make-Fabcare
Supply only following spares for flat work ironer 800mm x 3000mm Make -Fabcare
Polyester Padding suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Flannel Cloth suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Final Cover suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Conveyor Belts Imported with hook & pin as spare suitable ForFABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Guide Tape suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Main Bearing Set Roller (2 Pcs. = 1 Set) Make-NBC/SKF/IKO/NTN
Flexible S.S. Hose Pipes (3 Pcs. = 1 Set) suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
VFD suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
V-Belts Make-Continental /ISI Marked
FRL suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Pneumatic Fitting & Pneumatic Pipe suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
MCB 63AMP TPN Make- Legrand/Havells/Crompton/L&T
PUSH BUTTON Make- Seimens/L&T/AE/BCH/C&S
Ind. Light Make- Seimens/L&T/AE/BCH/C&S
Temp. Meter Make- Seimens/L&T/AE/BCH/C&S
Thermo Couple suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Gripper for Duffle Roll suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Pinion Gear arrangements Big Gear suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Pinion Gear arrangements Small Gear suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Chain suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Sprocket suitable For FABCARE Make flat work ironer 800mm x 3000mm Make -Fabcare
Supply only following spares for Hydro Extractor 25Kg Make-Fabcare
Brake Set suitable for FABCARE Make Hydro Extractor 25Kg
Indicater Light Make- Seimens/L&T/AE/BCH/C&S
Push Botton Actuator Make- Seimens/L&T/AE/BCH/C&S for FABCARE Make Hydro Extractor 25Kg
Limit SwitchMake-Seimens/L&T/AE/BCH/C&S
Rubber Bush FABCARE Make Hydro Extractor 25Kg
Springs FABCARE Make Hydro Extractor 25Kg
Timer 0 - 15 Min. Make-Legrand/L&T/Schnideler/Seimens
Main Bearing for Motor Make-NBC/SKF/IKO/NTN suitable for FABCARE Make Hydro Extractor 25Kg
Main Contactor Make-L&T/Seimens/Legrand/ABB/ISI Marked suitable for FABCARE Make Hydro Extractor 25Kg
Brake Contactor suitable for FABCARE Make Hydro Extractor 25Kg
GIC Timer suitable for FABCARE Make suitable for FABCARE Make Hydro Extractor 25Kg
Brake Transformer FABCARE Make suitable for FABCARE Make Hydro Extractor 25Kg
Supply only following spares for Sluicing Machine 25 Kg Make : Fab Care
BEARING (No 22213K) Make-NBC/SKF/IKO/NTN suitable for sluicing machine Make : Fab care
BUTTERFLY VALVE Make-Leader/Venus/Sant/BIR suitable for sluicing machine Make : Fab care
RUBBER OIL SEAL suitable for sluicing machine Make : Fab care
SLEEVE suitable for sluicing machine Make : Fab care
TOGGLE CLAMP SS suitable for sluicing machine Make : Fab care
GLASS DOOR FOR WASHING MACHINE suitable for slcuicing machine Make : Fab care
WASHING MACHINE CONTROLLER suitable for sluicing machine Make : Fab care
ELECTRIC PANNEL suitable for sluicing machine Make : Fab care
CONTACT BLOCK 1NO+1NC Make-Legrand /L&T/ Schnideler/ Seimens suitable for slcuicing machine Make : Fab care
CONTACT BLOCK 2NO+2NC Make-Legrand/L&T/Schnideler/Seimens suitable for slcuicing machine Make : Fab care
CONTACTOR 415V TPN Make-Legrand/L&T/Schnideler/Seimens suitable for slcuicing machine Make : Fab care
DOOR GASKIT suitable for sluicing machine Make : Fab care
FRL 1/4suitable for sluicing machine Make : Fab care
FRL 1/2"suitable for sluicing machine Make : Fab care
HEATER suitable for sluicing machine Make : Fab care
INDCATING LIGHT Make- Seimens/L&T/AE/BCH/C&S
INDCATING LIGHT CLEAR Make-Seimens/L&T/AE/BCH/C&S
LIMIT SWITCH Make-Seimens/L&T/AE/BCH/C&S
MPD 0-10 suitable for sluicing machine Make : Fab care
PNEUMATIC ACTUATOR FITTED BUTTER FLY VALVE 2" ROTEX suitable for sluicing machine Make : Fab care
PRESSURE SWITCH suitable for sluicing machine Make : Fab care
PUSH BUTTON Make- Seimens/L&T/AE/BCH/C&S
REVERSING TIMER ANALOG TYPE Make-Legrand/L&T/Schnideler/Seimens
SINGLE SOLENOID VALVE 1/4 Make- JANATICS/Danfoss/Indfos/L&T/Seimens
SS CASTING BALL VALVE FOR STEAM INLET 1" Make-Leader/Venus/Sant/BIR
SS CASTING BALL VALVE FOR STEAM INLET 1/2" Make-Leader/Venus/Sant/BIR
SS CASTING BALL VALVE FOR STEAM INLET 3/4" Make-Leader/Venus/Sant/BIR
TEMPRATURE METER 72 X 72 Make-Seimens/L&T/AE/BCH/C&S
THERMO COUPLE 3MTR suitable for slcuicing machine Make : Fab care
THERMO COUPLE 5MTR suitable for slcuicing machine Make : Fab care
TOGGAL SWITCH ON - OFF suitable for slcuicing machine Make : Fab care
TOGGAL SWITCH ON - OFF - ON suitable for slcuicing machine Make : Fab care
Main Motor Make-Kirlosker/Crompton/Jyoty
Supply only following spares for Washing Machine 50 Kg
V Belt (No 2360) - Main Make-Continental /ISI Marked Suitable for washing machine
V Belt (3600) - Idler Make-Continental /ISI Marked Suitable for washing machine
Temp. Controller Suitable for washing machine
Thermo Couple Suitable for washing machine
Reverse Timer Suitable for washing machine Make-Legrand/L&T/Schnideler/Seimens
0 - 60 Timer Suitable for washing machine Make-Legrand/L&T/Schnideler/Seimens
Push Button Suitable for washing machine Make- Seimens/L&T/AE/BCH/C&S
Indicating Light Suitable for washing machine Make- Seimens/L&T/AE/BCH/C&S
Toggle Switch Suitable for washing machine
LIMIT SWITCH Make-Seimens/L&T/AE/BCH/C&S Suitable for washing machine
Door Gasket Suitable for washing machine
Door Glass Suitable for washing machine
CONTACTOR 415V TPN Suitable for washing machine Make-Legrand/L&T/Schnideler/Seimens
MPD (HUMOJTICS DT x 6) Suitable for washing machine
Drain Valve Electric Operated Suitable for washing machine
Water Inlet Valve Electric Operated Suitable for washing machine
Steam Inlet Valve Electric Operated Suitable for washing machine
Main Bearing Make-NBC/SKF/IKO/NTN Suitable for washing machine
Sleeve for Main Bearing (No 2211K) Make-NBC/SKF/IKO/NTN Suitable for washing machine
Idler Bearing ( No 2213K) Make-NBC/SKF/IKO/NTN Suitable for washing machine
Sleeve for Idler Bearing (2213K) Make-NBC/SKF/IKO/NTNSuitable for washing machine
Motor Main suitable for washing machine 50kg Make-Kirlosker/Crompton/Jyoty
Compehensive annual maintenance/servicing/repairing of Steam Boiler 400 KG/Hrs with Spares which will be submitted to the Engr-in-Charge before commencement of work at Laundry Plant of MH Jodhpur. Make Thermax and all as directed by Engineer-in-Charge, comparising of following:- Notes :- (i) Spares required for replacement will be measured and paid seperatly as per actual as listed in Sch-A Section -III for each machine. (ii) Preventive maintenance –11 Visits / year (iii) Overhauling Guidance – 2 Visits / year (iv) Breakdown visits if any on requirement basis (v) Descaling Maintenance - 2 Visits / Year (vi) In case contractor fails to attend complaint within 2 working days then penalty of Rs 2000/- shall be recovered per day of delayed period. (vii) A service report for job carried out will be prepared by his service engineer which will be authenticated by our maintenance incharge.
Sch -A Section - III Supply one following spares for Steam Boiler 400 Kg/Hrs Make : Thermax
Coil Suitable for 400kg/hrs Thermax make steam boiler
Fuel pump Suitable for 400kg/hrs Thermax make steam boiler
Squence controller Suitable for 400kg/hrs Thermax make steam boiler
Photocell Suitable for 400kg/hrs Thermax make steam boiler
Gland washer Suitable for 400kg/hrs Thermax make steam boiler
Burner rod assembly Suitable for 400kg/hrs Thermax make steam boiler
Nozzle Suitable for 400kg/hrs Thermax make steam boiler
RTD Suitable for 400kg/hrs Thermax make steam boiler
Economiser Duct Suitable for 400kg/hrs Thermax make steam boiler
Optimiser Suitable for 400kg/hrs Thermax make steam boiler
Water pump Suitable for 400kg/hrs Thermax make steam boiler
Wegnamcone Suitable for 400kg/hrs Thermax make steam boiler
Economiser Suitable for 400kg/hrs Thermax make steam boiler
Diffuser plate Suitable for 400kg/hrs Thermax make steam boiler
Inner Jacket Suitable for 400kg/hrs Thermax make steam boiler
Alu. Sheet Suitable for 400kg/hrs Thermax make steam boiler
Transformer Suitable for 400kg/hrs Thermax make steam boiler
Refectory cement (needs to be changed with coil replacement) Suitable for 400kg/hrs Thermax make steam boiler
Valve seat assy Suitable for 400kg/hrs Thermax make steam boiler
Safety valve Suitable for 400kg/hrs Thermax make steam boiler
Oil filter Suitable for 400kg/hrs Thermax make steam boiler
Packing Suitable for 400kg/hrs Thermax make steam boiler
Multiport valve Suitable for 400kg/hrs Thermax make steam boiler
Strainer Suitable for 400kg/hrs Thermax make steam boiler
Globe valve Suitable for 400kg/hrs Thermax make steam boiler
NRV Suitable for 400kg/hrs Thermax make steam boiler
Temperature controller Suitable for 400kg/hrs Thermax make steam boiler
Compehensive Annual Maintenance / servicing / repairing of Effluent Treatment Plant for once in two month interval comparising of the following :- (i) Spares required for replacement will be measured and paid seperatly as per actual as listed in Sch-A Section -IV. (ii) Preventive maintenance –6 Visits / year. (iii) Overhauling Guidance – 2 Visit/year (iv) Contractor will provied required chemical for dosing and cleaning – 1 year (v) Installing agitating system for mixing chemicals with non treated water – 1 Nos. (vi) Installing UV treatment plant (2000 LPH) for cleaning germs (like bacteria & viruses) in untreated water - 01 Nos (vii) All pipeline maintenance with flanges - 6 Visits / Year (viii) All structure maintenance - 6 Vistis / Year (ix) All sensor with panel maintenance - 6 Vistis / Year (x) All pressure gauge / dosing system maintenance - 6 visits / Year (xi) In case contractor fails to attend complaint within 2 working days then penalty of Rs 2000/- shall be recovered per day of delayed period. (xii) A service report for job carried out will be prepared by your service engineer which will be authenticated by our maintenance incharge.
Sch -A Section - IV Supply one following spares for Steam Boilder 400 Kg/Hrs Make : Thermax
Membarane for 2000 LPH RO Plant
Repair / rewinding of motor pump installed at ETP capacity of 0.5 Hp to 1.5 Hp
Note:- Items catered in Section-II (SL NO 2.00 TO 7.22) are provisional and will be executed as per site requirement and as decided byBoard of Officers and no claim shall be admissible by the contractor on this account
Pioneer Enterprises
Supershine Laundry Systems Pvt. Ltd.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .