Constuction of 1500 MT Warehouse and Processing shed 396 sqm

Amount

W.H.Building 1/1500 M T RICE MILL SHED

Excavation for foundation in earth, soil of all types, sand gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering preparing the bed for the foundation and necessary back filing, ramming, watering including shoring and strutting etc complete (Lift uplo 1.5 m)

Excavation for foundation in earth, soils of all types, sand, gravel and softmurum, including removing the excavated material upto adistance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means

Providing soling using 80 mm size trap metal in 15 cm.layer including filling voids with Crushed sand/grit,ramming. watering etc. complete

Filing in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc complete

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete. With natural sand/V SI quality Artificial Sand

Providing and laying in situ/Ready Mix cement concrete M 20 of trap/graniite /quartzile gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc including balling out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V S. I quality Artificial Sand

Providing and laying Castin nitu/Reaily Mix cement concrete M-20 of trap/ granite /quartzite gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, form work, cover blocks, laying pumping compaction finishing the formed surfaces. with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface ar roughening if special finish is to be provided and curing ete complete (Espluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete 8atch mix plant (Pan mixer) etc complete. With natural sand/V.SI quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite /quartzite/ gneiss matal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and cuning etc. complete (Excluding reinforcement and structural steel) with tuby automatic micro processor based PLC with SCADA enabled reversible Drum Type micer/ concrete Batch mix plant (Pan moxer) etc complete With natural sand/V.SI. quality Artificial Sand

Providing and laying Cast in situ Ready Mix cement concrete M-20 of trap/ granite/ quartzitel gneiss metal for R.C.C. chajja as per detalied design and drawings including centering, formwork, cover blocks compacting, curing. finishing and toughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc complete. With natural sand/VS1 quality Artificial Sand

Prodding and Mying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting roughening them if special tirish is to the provided, finishing uneven and honeycombed surface and curing etc complets The Camant Mortar 13 plaster is consideraid for rendering uneven and honeycombed surface only Newly laid contiste shall be covered by gimny bag, plastic, tarpaulin etc (Woodet centaning will not be allowed)

Providing and foong in position TMT-FE-500 bar reinforcement of various diameters for RCC pile caps footings, foundations, stats, beams columns, canopies staircase newels chajjas, litels pardis, copings, fins, wiches Jete an per detailed designs, drawings and schedules including cutting bending, hooking the tiers, biriding with wires or tack welding and supporting as required complete

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Completewalls including bailing out water manually, striking joints on unexposed faces, raking out joints an exposed faces and watering etc. Complete

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing internal cement plaster 12mm thick in single coat. cement mortar 1:5 without neeru finish to concrete or brick surtaces, in all positions including scaffolding and curing etc.

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete

Providing and fixing steel window of various sizes as per detaled drawing without hot dip zinc coating without ventilators.

Providing and fixing mild steel grill work for windows, ventilators etc. 20kg/Sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrsive paint and two coats of all painting complete.

Providing and lying cement concrete flooring 40mm thick with M15cement concrete laid to proper level and slope in alternate bays including compactions, fiting joints, marking Ines to give the appearance of tiles of 30cmx 30cm or other site laid dagonaly square atc. Sishing smooth (with extra cement in any colour as directed and curing etc. complete. With Natural Sand

Providing and applying two coats of water proof cementpaint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary,cleaning and preparing the surface, watering for two days etc. complete.

PEB Work Above Plinth Providing structural steel work in trusses, other similar trussed purlins and members with all tracing gusset plates eto, as per detailed designs and drawings or as drected including cutting, fabricating, hoisting, erecting fixing in position, Making siveted bolted/welded connection and one cont of anticorrosive paint and over 2 costs of oil painting approved quality and thade etc complete

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting,fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fixing colour coated Zincalume (R) AZ150 ( min 150 gms/sq.mt total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 045 mm Base Metal Thickness (BMT) (0.5 mm TCT), H strength steel with min 550 MPa yield strength, metalic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43 4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface Profile sheet shall have nom 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180- 250 mm center-to-center. The end rib

Providing and Fixing rolling shutter fabricated from steel laths ofminimum thickness 0.9 mm with lock plate of 3.15 im thickness red with 35 x 35 x 5 mm angle section had with sliding bet and handles for both sides, deep MS

Turbo Ventilator Supply & Fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF - 600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of 2mm thk clear 1.020 mtr wide & 1.7 mtr long.

Roof Accessories Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-

INTRNAL ROAD WORK Excavation for roadway in earth, soil of all sorts, sand,gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means- Grading I (UsingScreening Type B (11.2 mm) Aggregate)

Providing and laying 125 micron Low Density Polyethylene(LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/granite /quartzite /gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc.complete. The Cement Mortar 1:3 plaster is considered for rendering unevenand honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) ,with fully automatic micro processor based PLCwith SCADA enabled reversible Drum Typemixer /concrete Batch mix plant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete.

Supplying hard murum /kankar at the road site, including conveying and stacking complete.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

ROYALTY METAL 40 MM & ABOVE

MURUM

MATERIAL LAB TESTING Cement - Fineness, Standard Consistency, Setting Time (Initial & Final), Compressive strength, Soundness

Sand - Fineness Modules and Silt & Clay Content

Concrete M-20 grade - Concrete cube compressive strength (Set of 3 Cubes)

Crushed metal - Water absorption, Specific gravity, Impact value, Crushing value

Brick - Crushing value, Water absorption , & Specific Gravity

Steel - Tensile strength ,Yield stress, ultimate tensile stress, % elongation , weight per running meter ,Bend/Rebend test.(Set of 3 Bars)

Murum - Liquid limit & plastic limit

ELECTRIFICATION Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm.(12 SWG) G.I. earth wire complete erected with glands &lugs, on wall/ trusses/pole or laid in provided trench/pipeas per specification no. CB-T/CU

Making french of suitable width and depth In hard murum /tar road for laying provided LT cable up to andincluding 16 sq. mm complete as per specification no. CW.EXNCIR

Making trench of suitable width and depth In soft sol for laying provided LT cable up to and including 14 sq.mm complete as per specification no, CW-EXN-CTR

Supplying & erecting mains PVC unarmoured cable 1100 Volt grade ISI mark 3 core 6

Supplying erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B.with industrial two pin plug socket 10 A and 3 pin plug top 10 A with top cover necessary connection etc complete with approved make.

Providing point wiring for street light with PVC unarmoured cable 1100Volt grade ISI mark 3 core 1.5 sqmm stranded/solid copper erected on wall with G. 1. Saddle duty painted @ 0.25 m C/C rigidly grouted in the wall with the help of plated screw including 4"x 4" M. S.box 2 way with epoxy painting. 7 Supplying & erecting 10- 12W, 230v Integral type LED Lamp suitable for 8-22/E-27 base.

Supplying & erecting 10.12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting LED street light fitting suitable for 20 to 25W, with PF> 0.95 class IP 45 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS

Providing earthing with galvanized iron earth plate size 60x 60 x 0.6 cm complete with all materials, testing &recording the results as per specification no. EA-EP

Providing pipe type earthing with 40mm, dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials or per specificallon no. EA-EP

Supplying, erecting & marking DPMCB LA lo 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series (for lighting) in provided distribution board as per specification no. 5W- SWR/MCB

Supplying and erecting Gl sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards elc. Including culling bending, delling, welding, riveting etc. and palling with one coal of red lead point and 2 coats of enamel paint.

Supplying and erecting marine plywood 18/19 mm thick fixed to well or on provided panel board with necessary materials such screws, wat fasteners, supports, nut bolts etc.

Supplying and erecting triple pole and (neutral dishibulion beard (TPNOB) surface/flush mounted suitable for SPMC of 12 ways on Iren/Gl frame (hortzental busbar type) as per specification no. SW.SWR/MCBDA

Supplying & erecting Gl. pipe 'A' class 25 10.00 mm dia. erecled for enclosing XLPE armoured cable on wall/ pole as per specification no. CB-CE

Supplying & erecting G.I. pipe 'A' class 40 mm dia, erected for enclosing XLPE armoured cable on woll/pole as per specification no. CB-CE

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. Double woll corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting 18 guage M.S.Box powder coated (4"x4" 3 way for mains connection.

Supplying & erecting Siemens type brass cable glands for 3 to 4 core & sq. mm./2 fo 4 core 10 sq mm. for XLPE armoured cable as per specification No. CB.GL

Supplying shockproof type hand lamp with lamp holder,bulb/ lamp 100 W guarded glass and 30 mtr. 3 core PVC flexible

Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sqmm (2+1E) FRLSH grade copper wire, flush type switch earthing and required accessories as per specification No: WG-PW/SW

Supplying and erecting Street üght bracket made hom 25 mm. dia B' class G.I. Pipe, 0.6 m in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC

Supplying & erecting mains with 2 x 2.5 Sq.mm stranded copper PVC insulated wire with 2 x 1.5 Sqmm copper PVC wire in PVC casing-casing 20 mm on wall/celling

Supplying & erecting main with 2 x 4.00 Sq.mm stranded copper PVC insulated wire with 2 x 1.5 5qmm copper PVC wire in PVC casing-caping on wall/celing

Supplying and erecting double pole switch surface type/ flush type 240V, 32A with Indicator lamp & fuse as per specification no. SW-SWR/BDP.

Supplying and erecting double pole metal elad switch with HC type fuse and neutral nk 240V, 32A on iron/G1 trame as per specification ne, SW-SWR/MDP

Supplying & erecting 3W, 230V Integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting T8 Fluorescent tube day light 1200 mm 36 W

Supplying & erecting ready to use regular 1.00 T8 LED 18/20 tube light with polycarbonate body, heal sink, Integrated HF electronic driver complele & compatible to T8/T12 LED luminaire by disconnecting starter & ballast if necessary.

Supplying and erecting regular/ standard model celling fan of 900 /1050 mm, sweep complete erected in position as per specification no. FG-FN/CF

Supplying and fixing wiremesh (Jali) cover suitable for fitting/fan or for any purpose. complete with necessary materials. The Jali cover shall be made from good quality G.I. wire mesh

Supplying and erecting ding dong/electronic musical type call bell with heavy duty coll suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size

Supplying and erecting street light Wall bracket made from 25 mm. dia "B" class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Supplying & erecting CRCA sheet metal one wayenclosures suitable for DP MCB/TP MCB /FP MCB erected on angle iron/Gl frame complete.

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40 A in provided distribution board complete

.Prviding and managing 20 Trees in the same premises, under Management Strategies And Implementation Plan ( MSIP ) to Manage Environmental , Social , Health And Safety.

D J CONSTRUCTION (BID ID -6257120)