Upgradation of road from Gulati to Sanjote by way of clearance of slips Construction of R B wall and providing and laying WBM Gr -II , Shingling in two layers 75mm thick each, Providing and laying WMM 100 mm thick 50mm thick BM and 30 mm thick SDBC

Amount

Clearance of drain in soils, mixed with moorumiKankar/shingle/ boulders; disposal all lead lifts carriages including loading unloading complete job.

Earth work in excavation by manual means in trenches for foundations , drains, pipes, cables etc over areas (not exceeding 1.5 mtr in width as well as 10 sqm on plan) in all kinds of soil including rock and disposal of surplus, excavated earth at dumping sites to be purchased by the contractor and approved by the engineer - in-charge at site for safe disposal of same without damaging private/ public property and all required leads/lifts and carriage. (Complete job)

Providing and laying in position Cement concrete of specified grade including the cost of centering and shuttering–all work upto required level in 1:5:10(1cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) using crushed stone aggregate including curing, all leads/lifts & carriages. (Complete job)

Providing and laying in position Cement concrete of specified grade in foundations, retaining wall, return walls, pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or laces courses, parapets, bed block, anchor block etc including cost of centering and shuttering – all work upto required level in 1:3:6 (1cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20 % plum using crushed stone aggregate including curing, all leads/lifts & carriages. (Complete job)

Dry random Rubble masonry with hard stone in foundation and plinths using nallah stone without bond stones including all leads/lifts, carriages, handling and re-handling (Complete job)

Supplying, stacking and laying of water bound macadam using graded crushed stone aggregate at site of size range 63 mm to 45 mm with specified stone aggregates stone screening of size 11.2mm and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075mm) to wet mixed macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, for all leads & lift laying in uniform layers with mechanical paver finisher with in sub-base/base course, 100 mm thick in single layers on well prepared surface and compacting with vibrator roller of 8 to 10 tonne capacity to achieve the desired density complete as per specifications and directions of Engineer –in-charge. ( complete job).

Providing and laying bituminous macadam of 50mm average compacted thickness with bitumen of 60/70 grade @ 3.5 % (percentage by weight of total mix) on prepared surface with specified graded crushed stone aggregates for profile corrective base/ binder course including loading of aggregate with F.E loader, hot mixing of stone aggregates in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers as per MORTH specifications and direction of Engineer-in-charge to achieve the desire density and compaction including the cost of brooming, primer/ tack coat, all leads/lifts, carriages, loading & unloading. (complete job)

Providing and laying semi dense bituminous concrete of 30 mm average compacted thickness with bitumen of 60/70 grade @ 5 %(percentage by weight of total mix)on prepared surface with specified graded crushed stone aggregates for wearing course including loading of aggregate with F.E loader and hot mixing of bitumen with filler and stone aggregates in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers as per MORTH specifications and direction of Engineer-in-charge to achieve the desire density and compaction including the cost of brooming, primer/ tack coat, all leads/lifts, carriages, loading & unloading. (complete job)

Mohd Latief

ZAFAR IQBAL KHAN

Shafayat Ahmed Khan

Mohmed Jamil Khan