Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
16 Sept 2026, 11:00 amDue tomorrow
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
82
1 condition
/We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of contract (latest revision) and upon the terms of t he R e v i s e d Special Conditions and instructions for the guidance of the contracts issued by the Western Railway S/137/F Revised May 2011 Amendment No. 10 of November 2017.
26 conditions
MARKING : Manufacturer to mark his name and date of manufacture as per drawing, wherever indicted, or at a location where it may not get obliterated in service on the item being supplied by them against the purchase order. Supplies received without this are liable to be rejected by consignee.
Risk purchase TIME LIMIT FOR MAKING RISK PURCHASE WILL BE 9 MONTHS INSTEAD OF 6 MONTHS.
Validity : Tenderers to quote minimum 90 days validity of offers.
LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: Recovery of Liquidated Damage (LD) shall be levied @ 1/2% (half percent) of the price of the store per week or part of the week during which delivery is accepted and the upper limit for recovery of LD in supply contracts is 10%(ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract.
ADVANCE ACCEPTANCE/COUNTER OFFER AND DELIVERY PERIOD: The delivery period in Store Procurement cases shall be reckoned from the date of issue of Advance PO/Letter of Advance Acceptance/Letter of Acceptance.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
5 locations across Gujarat · 16 Numbers total
Drill Bit & Drill Machine
82266252~WR
82266252
Limited - Indigenous
Goods
Bharuch, Gujarat
₹0
Exempted
9 Sept 2026
9 Sept 2026
7 items · 16 Numbers total
Air Blower 850W,Portable Electric Air Blower ( Heavy duty ) with Dust Extraction as per specif ication : Voltage 110-230V, AC/DC ,rated Input Power : 800W-900W, Volumetric Flow rate 4.5 M3/min. , no l oad speed : 16000 rpm. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER ELECTRICAL BHARUCH, WR | Gujarat | 2.00 Numbers |
| Total | 2 Numbers | |
Drill Bit(s) Rotary Hammer Drill NDRF Specification:Power supply 230 V, 50 Hz,Single Phase P ower Rating in Watt 720 Rotation speed of the Hammer (in rpm) 1550 Impact Rate ( ipm) 4800 Noise level i n db when working within 1 metre distance 95.6 Length of electric cord provided in metres 5 3 Pin 5 Amp El ectric Cord to be Provided Yes Number of drill bits provided 5 Length of Drill bits (in cm) 30 Chisel adjustme nt with mode selector switch for drilling/ chiselling 36 position Weight of the hammer drill in KG 3. Machine should have shock proof body Yes Suitable Protective carry case provided Yes warranty in years 1 instructio n manual to be provided Yes Rotary Hammer Drill is designed for punching of holes in hard material throug h the use of firing machnism Yes [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER ELECTRICAL BHARUCH, WR | Gujarat | 2.00 Numbers |
| Total | 2 Numbers | |
Supply of Optical Visual Fault Locator (Laser Source Meter); TORCH type. Laser power output 30mW suitable to measure 30Km lenght of OFC cable. [ Warranty Period: 30 Months after the date of deli very ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER (TELE ) II PRATAPNAGAR., WR | Gujarat | 2.00 Numbers |
| Total | 2 Numbers | |
ROTARY HAMMER DRILL MACHINE with drill bit 30 cm is designed for punching ofholes in har d material through the use of firing machnism working on single phase 230 V AC 50 HZ supply Specification :Power supply 230 V, 50 Hz,Single Phase Power Rating in Watt 700 Rotation speed of the Hammer (in rpm) 1200 Impact Rate ( ipm) 3500 Noise level in db when working within 1 metre distance 85 Length of electric cord provided in metres 5 3 Pin 5 Amp Electric Cord to be Provided Yes Number of drill bits provided 1 Leng th of Drill bits (in cm) 30 Chisel adjustment with mode selector switch for drilling/ chiselling 36 position Wei ght of the hammer drill in KG 4. Machine should have shock proof body Yes Suitable Protective carry case p rovided Yes warranty in years 1 instruction manual to be provided Yes Rotary Hammer Drill is designed for punching of holes in hard material through the use of firing machnism Yes [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| JUNIOR ELECTRICAL ENGINEER GRADE I DABHOI, WR | Gujarat | 1.00 Numbers |
| Total | 1 Numbers | |
Supply of Cordless Drill Machine battery operated Makita/Bosch or similar (specification attac hed) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER (TELE ) II PRATAPNAGAR., WR | Gujarat | 1.00 Numbers |
| Total | 1 Numbers | |
ELECTRIC DRILL MACHINE PORTABLE 230V/110V AC DRILL CAPICITY HP RATING-1HP MAKE-NI PPON, NEUTRON, WOLF. ACCEPTED DESCRIPTION AS PER GEM CONTRACT ORDER.Specification:ower suppl y 230 V, 50 Hz,Single Phase Power Rating in Watt 500 Rotation speed of the Hammer (in rpm) 2100 Impact Rate ( ipm) 1000 Noise level in db when working within 1 metre distance 60 Length of electric cord provide d in metres 5 3 Pin 5 Amp Electric Cord to be Provided Yes Number of drill bits provided 1 Length of Drill bit s (in cm) 30 Chisel adjustment with mode selector switch for drilling/ chiselling NA Machine should have sho ck proof body Yes Suitable Protective carry case provided Yes warranty in years 1 instruction manual to be provided Yes Rotary Hammer Drill is designed for punching of holes in hard material through the use of firin g machnism Yes Weight of the hammer drill in KG 3. [ Warranty Period: 12 Months after the date of deliv ery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (SIGNAL) BHARUCH, WR | Gujarat | 6.00 Numbers |
| Total | 6 Numbers | |
Earth tester Specification: Display type 4 digit LCD display Measurable Earth resistance range selection Auto ranging Method for resistance measurement 4-pole Counts 4000 [ Warranty Period: 30 Mo nths after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (ELECTRICAL POWER) GODHRA, WR | Gujarat | 2.00 Numbers |
| Total | 2 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5887324.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .