Upgradation of Civil Hospital 200 Bedded to 300 Bedded at Ambala City in Ambala Distt (Pdg. Additional Chiller and Allied Work).

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Executive Engineer Electrical Division PWD B&R Br., Ambala Cantt

Name of Work: Upgradation of Civil Hospital 200 Bedded to 300 Bedded at Ambala City in Ambala Distt (Pdg. Additional Chiller and Allied Work).

[25.6.7]Supplying, fixing, testing and commissioning o STRAINER flanged end and PN 16 pressure rating as specified. 7. 50mm dia. [Through Rate]

Name of the Bidder/ Bidding Firm / Company :

Sl. No. HSR Items / Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder in Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Providing and fixing in position the following 32mm dia MS `C` class pipes, cut to required length and installed with welded joints, providing and fixing all necessary fittings such as bends, elbows, tees, reducers, flanges, sockets etc. Chilled water piping shall be insulated with 50 mm thick EPS Pipe Section (TF Quality) covered with 2 layers of sand cement plaster each layer of 8 mm for exposed piping or 26 SWG Aluminium cladding over piping for indoor installation complete in all respect upto entire satisfaction of Engineer in charge of work. BI01010001010000000000000515BI0100001113 250 Each 1 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

2 Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. Make : Swirl Air/ Systemaire/Carryair/ Airmod BI01010001010000000000000515BI0100001114 54 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 2 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

3 SITC of Sub Panel :- P2 for AHUsWall mounted sub panel boards for AHUs with starter inter connections, Current operated single phase preventors A/M switch etc as per specifications and drawings as required.1 No incoming 100 Amps 4 pole TP plus NL MCB, 1 No star delta starter for motor, 3 Nos indication lights, 2 Nos Push Buttons, complete in all respect upto entire satisfaction of Engineer in Charge of work BI01010001010000000000000515BI0100001115 75 Each 3 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

4 Supply and Fixing of 3C x 1.5 Sqmm Providing and Fixing of control cable of shielded and analyed tinned copper for inter locking. complete in all respect upto entire satisfaction of Engineer in charge of work. Make as per attached list. BI01010001010000000000000515BI0100001116 1300 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 4 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

5 FCU:- Supply, installation, testing and commissioning of 3.0 TR. 1200 CFM 7 mm of WC 3 Deep 10 Level factory fabricated Double Skin Chilled Water Air- handling unit horizontal type fabricated out of extruded aluminium section consisting with 0.63 mm pre-plasticized/pre-coated Galvanized steel sheet outside and 0.63 mm plain aluminium sheet inside with blower, blower section and Blower shall be DIDW forward / Backward Curved blade from and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, Multi Row deep cooling coil made of Aluminium finned Copper tube with coil section, pre - filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90% , stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package etc. The AHU panels shall be insulated with 25 plus 2 mm thick and 38 Kg/m³ density PU foam. The motor and blower assembly shall be mounted on Aluminium extruded section. The complete AHU/FCU shall conform to standard specification complete in all respect upto entire satisfaction of Engineer in charge of work. Make : as per attached list. BI01010001010000000000000515BI0100001117 2 Each 5 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6 Providing and fixing in position the following 25mm dia MS `C` class pipes, cut to required length and installed with welded joints, providing and fixing all necessary fittings such as bends, elbows, tees, reducers, flanges, sockets etc. Chilled water piping shall be insulated with 50 mm thick EPS Pipe Section (TF Quality) covered with 2 layers of sand cement plaster each layer of 8 mm for exposed piping or 26 SWG Aluminium cladding over piping for indoor installation complete in all respect upto entire satisfaction of Engineer in charge of work. Make as per attached list. BI01010001010000000000000515BI0100001118 425 Each 6 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

7 Providing and fixing of duct insulation with 25mm thick closed cell nitrile rubber sheet as per specs complete in all respect upto entire satisfaction of Engineer in charge of work. Make as per attached list... BI01010001010000000000000515BI0100001119 5000 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 7 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

8 Supplying and fixing of powder coated extruded aluminium return Air Grills / diffusers without volume control dampers as per specifications, Make as per attached list. BI01010001010000000000000515BI0100001120 200 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 8 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

9 SITC of Actuators Motor for Fire Dampers complete in all respect upto entire satisfaction of engineer in charge. Make as per attached list. BI01010001010000000000000515BI0100001121 60 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 9 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

10 Ceiling Suspended Units : Supply, installation, testing and commissioning of 12 TR 4800 CFM 65 mm 6 Row 5 Microns factory fabricated Double Skin Chilled Water Air- handling unit horizontal type fabricated out of extruded aluminium section consisting with 0.63 mm pre-plasticized/pre-coated Galvanized steel sheet outside and 0.63 mm plain aluminium sheet inside with blower, blower section and Blower shall be DIDW forward / Backward Curved blade from and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, Multi Row deep cooling coil made of Aluminium finned Copper tube with coil section, pre - filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90% , stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package etc. The AHU panels shall be insulated with 25 plus 2 mm thick and 38 Kg/m³ density PU foam. The motor and blower assembly shall be mounted on Aluminium extruded section. The complete AHU/FCU shall conform to standard specification complete in all respect upto entire satisfaction of Engineer in charge of work. Make as per attached list. BI01010001010000000000000515BI0100001122 1 Each 10 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

11 FCU:- Supply, installation, testing and commissioning of 2.5 TR. 1000 CFM 7 mm of WC 3 Deep 10 Level factory fabricated Double Skin Chilled Water Air- handling unit horizontal type fabricated out of extruded aluminium section consisting with 0.63 mm pre-plasticized/pre-coated Galvanized steel sheet outside and 0.63 mm plain aluminium sheet inside with blower, blower section and Blower shall be DIDW forward / Backward Curved blade from and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, Multi Row deep cooling coil made of Aluminium finned Copper tube with coil section, pre - filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90% , stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package etc. The AHU panels shall be insulated with 25 plus 2 mm thick and 38 Kg/m³ density PU foam. The motor and blower assembly shall be mounted on Aluminium extruded section. The complete AHU/FCU shall conform to standard specification complete in all respect upto entire satisfaction of Engineer in charge of work. Make as per attached list. BI01010001010000000000000515BI0100001123 3 Each 11 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

12 Supplying and fixing of Fresh air intake louvers with bird screen and dampers (Aluminium extruded only). Make as per attached list.. BI01010001010000000000000515BI0100001124 5 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 12 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

13 Supplying and fixing of powder coated extruded aluminium Supply Air Grills / diffusers with aluminium volume control dampers as per specifications. complete in all respect upto entire satisfaction of Engineer in charge of work. Make as per attached list. BI01010001010000000000000515BI0100001125 150 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 13 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

14 SITC if Weather proof isolator for cooling tower Outdoor weather proof switch box of continuous welded construction, fabricated out of 2 mm thick GI sheet complete with water tight gasket with front openable and lockable door including earthing, painting glands, danger boards etc. Suitable for mounting on MS angle frame consisting of revelant specification and drawings 100 Amps TP plus NL isolators for cooling tower near cooling tower complete the job in all respect up to the entire satisfaction of Engineer in Charge of work. Make as per attached list. . BI01010001010000000000000515BI0100001126 1 40 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 14 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

15 Supply and Fixing of 4C x 2.5 Sqmm Providing and Fixing of control cable of shielded and analyed tinned copper for inter locking. complete in all respect upto entire satisfaction of Engineer in charge of work. Make as per attached list. BI01010001010000000000000515BI0100001127 1400 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 15 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

16 Supply , installation , testing and commissioning of Jet fans of 10700 CFM with SP 65 mmwg Dia 300-400 mm, with suitable motor and drive assembly, with all accessories and fire rated flexible connections, mounting frame hangers etc. Motor shall be suitable for 415 V plus /- 10%, 3 phase, 4 wire, 50 plus /- 3% Hzs, electric supply complete in all respect upto entire satisfaction of Engineer in charge of work. Make as per attached list. BI01010001010000000000000515BI0100001128 8 Each 16 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

17 Supply , installation , testing and commissioning of Axial Flow Fan - 5900 CFM SP 25 mmwg, with suitable motor and drive assembly, with all accessories and fire rated flexible connections, mounting frame hangers etc. Motor shall be suitable for 415 V plus /- 10%, 3 phase, 4 wire, 50 plus /- 3% Hzs, electric supply complete in all respect upto entire satisfaction of Engineer in charge of work. Make as per attached list. . BI01010001010000000000000515BI0100001129 14 Each 17 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

18 -Pdg. Minor Civil work i.e foundation of Chiller, Pump ,Set, Cooling tower, Hot water generator, making holes in brick wall, work for ducting, piping including repair with mixture of sand ,and cement with all labour and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of work BI01010001010000000000000515BI0100001130 2 Sqm 18 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

19 Water Cooled Chilling Unit:- Supply, Installation, Testing and Commissioning of Water Cooled Screw type chilling unit of 350±5% TR actual capacity with company fitted VFD at the parameters indicated below complete with Semi Hermetic/ hermetic compressor. Helical Rotary Mono / Twin screw with Single/ Multi Ref. Circuit with single/multiple compressor with suitable capacity TERC squirrel cage induction motor, factory insulated chiller, water cooled condenser, vibration isolators, integral refrigerant piping and wiring, first charge of R-134a refrigerant and lubricant, microprocessor based control panel and accessories as required. Motor shall be suitable for 415±10% Volts, 50 Hz, 3 ph AC supply as per specifications with all labour and petty material required to complete the job in all respect upto the entire specifications Mono / Twin Screw type compr BI01010001010000000000000515BI0100001131 1 Metre 19 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

20 essor semi hermetic complete with automatic capacity control safety switches, forced feed lubrication system. The semi hermetic compressor should be mono/twin type. Capacity control range of compressor shall be from 25% to 100%. Screw type chilling machine described above, as per specifications and complete in all respects for the operating parameters as given under. The evaporator and condenser shall have even pass system or marine water box shall be provided with odd pass system for ease of descaling. The Chillers shall be in accordance with AHRI Standard. Radiographic Non Destructive Test for long seam welding of both evaporator and condenser shells shall be done and the test report of the same shall be duly verified. Chiller OEM and compressor shall be of same make. Chiller compressor sourced from 3rd party manufacturer under labelling program is not acceptable. Cooler:- Chiller Water in: 54 Deg F Chilled water out: 44 Deg F Chiller Water Flow rate: 840 USGPM Fouling Factor: 0.0001 FPS Chiller side Maximum pressure drop: 5 Mtrs. Condenser:- Condenser Water in: 86 Deg F Condenser Water out: 95 Deg F Fouling Factor: 0.000250 FPS Chiller Water Flow rate: 1050 USGPM Condenser side Maximum pressure drop: 6 Mtrs. COP at AHRI conditions 5.8 minimum. IPLV shall not be more than 0.38 KW/TR Chiller 350±5% TR (At above conditions) Make :- Daikin/Carrier/Trane/York BI01010001010000000000000515BI0100001132 1 Metre 20 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

21 Supply, installation, testing and commissioning of End Suction Back pull out, flexible coupling with coupling guard centrifugal type Condenser Water pumping set with BZ/CF-8 ASTM #A351 Impeller , Casing/Volute - Cast Iron ASTM #159, Shaft – SS 416 complete with IE3 motor, base frame and motor should be non-overloading type. Pumps efficiency should be more then 85%. The pump motor shall be suitable for 4 pole, 415 Volts ± 10%, 50 cycles, 3 phase power supply. Apart from this Pumps should be mandatory along with wireless optimyze monitoring device mounted over Pump set which is suitable to measure changes on vibration in three axis and temperature in pumps set. operating parameters Pumping set with bronze impeller (1 Working plus 1 std by), Cap 1380 USGPM (90 LPS), HEAD 30-34 meter Complete in all respect upto entire satisfaction of Engineer in Charge of work: Make :- As per attached list . BI01010001010000000000000515BI0100001133 1 Metre 21 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

22 Supply, installation, testing and commissioning of End Suction Back pull out, flexible coupling with coupling guard centrifugal type Chilled Water pumping set with BZ/CF-8 ASTM #A351 Impeller , Casing/Volute - Cast Iron ASTM #159, Shaft – SS 416 complete with IE3 motor, base frame and motor should be non-overloading type. Pumps efficiency should be more then 85%. The pump motor shall be suitable for 4 pole, 415 Volts ± 10%, 50 cycles, 3 phase power supply. Apart from this Pumps should be mandatory along with wireless optimyze monitoring device mounted over Pump set which is suitable to measure changes on vibration in three axis and temperature in pumps set. operating parameters as Pumping set with bronze impeller (1 Working plus 1 std by), Cap 850 USGPM (53.5 LPS), HEAD 26 meter, complete in all respect upto entire satisfaction of Engineer in charge of work: Make :- As per attached list . BI01010001010000000000000515BI0100001134 1 Metre 22 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

23 Supply, installation, testing and commissioning hot water generator arranged in steps of capacity 350 KW (1Working plus 0 Std By) complete in all respect upto entire satisfaction of Engineer in charge of work. Make :- As per attached list . BI01010001010000000000000515BI0100001135 1 Metre 23 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

24 Supply, installation, testing and commissioning of induced draft cooling towers of cap 425 TR. Each tower shall be complete with distribution system, fillings, louvers, Hot dipped galvanized ladder, axial flow fan and motor. Motor (IP:55) shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase power supply. The Cooling Tower shall be complete in all respect capacity of each Cooling tower shall be as follows: Capacity: To Cool 1380 USGPM of water at parameters indicated above, complete in all respect upto entire satisfaction of Engineer in charge of work Make :- As per attached list . BI01010001010000000000000515BI0100001136 2 Metre 24 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

25 Supply, installation, testing and commissioning of factory fabricated Double Skin Chilled Water Air- handling unit horizontal type fabricated out of extruded aluminium section consisting with 0.63 mm pre-plasticized/pre-coated Galvanized steel sheet outside and 0.63 mm plain aluminium sheet inside with blower, blower section and Blower shall be DIDW forward / Backward Curved blade from and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, Multi Row deep cooling coil made of Aluminium finned Copper tube with coil section, pre - filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90% , stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package etc. The AHU panels shall be insulated with 25 plus 2 mm thick and 38 Kg/m³ density PU foam. The motor and blower assembly shall be mounted on Aluminium extruded section. The complete AHU/FCU shall conform to standard specification complete in all respect upto entire satisfaction of Engineer in charge of work. Make : As per attached list .30 TR 12000CFM 65 mm Deep 6 Row Level 5 Microns. BI01010001010000000000000515BI0100001137 2 Metre 25 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

26 Ceiling Suspended Units `AHU Cap Static pressure Cooling Coil filtration CS` TR CFM mm of WC Deep Level 4 TR 1600 40 mm 4 Row 10 Microns BI01010001010000000000000515BI0100001138 1 Metre 26 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

27 Ceiling Suspended Units `AHU Cap Static pressure Cooling Coil filtration CS` TR CFM mm of WC Deep Level 8 TR 3200 65 mm 6 Row 5 Microns BI01010001010000000000000515BI0100001139 25 Metre 27 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

28 Providing and fixing in position the following three way valves for Air Handling units complete with necessary cooling / heating thermostat and actuator complete in all respect upto entire satisfaction of Engineer in charge of work. Make As per attached list .Make : As per attached list . DIA 40 MM BI01010001010000000000000515BI0100001140 31 Metre 28 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

29 Providing and fixing in position the following three way valves for Air Handling units complete with necessary cooling / heating thermostat and actuator complete in all respect upto entire satisfaction of Engineer in charge of work. Make As per attached list .Make : As per attached list . DIA 32 MM BI01010001010000000000000515BI0100001141 85 Metre 29 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

30 Providing and fixing in position BI01010001010000000000000515BI0100001142 74 Metre 30 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

31 the following three way valves for Air Handling units complete with necessary cooling / heating thermostat and actuator complete in all respect upto entire satisfaction of Engineer in charge of work. Make As per attached list .Make : As per attached list . DIA 25 MM BI01010001010000000000000515BI0100001143 86 Metre 31 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

32 Providing and fixing in position mercury-in-glass filled industrial thermometers complete in all respect upto entire satisfaction of Engineer in charge of work. Make :- As per attached list . BI01010001010000000000000515BI0100001144 1 Metre 32 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

33 Providing and fixing in position industrial type pressure gauges having dial size 100 mm complete with syphon and cock complete in all respect upto entire satisfaction of Engineer in charge of work. .Make :- As per attached list . BI01010001010000000000000515BI0100001145 1 Metre 33 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

34 Supply, installation, testing and commissioning Closed Expansion Tank 750 Liter, PN 10. The closed expansion tank will be of M.S. construction with interchangeable Synthetic rubber membrane. The expansion tank shall be complete with safety relief valve and pressure gauge. The tank will be of pressure rating to suit the system pressure and will be sized to adequately compensate for water expansion due to operating temperature variations. For chilled water application, it will be insulated with 50 mm thick insulation to the specifications and cladded with 26G-aluminum cladding complete in all respect upto entire satisfaction of engineer in charge. as specified by Engineer-in-charge. Make :- As per attached list . BI01010001010000000000000515BI0100001146 11 Metre 34 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

35 SITC of Pressurisation unit Head 25 meter, Flow 2CMH shall be with 2 nos. (1 working plus 1 stand by) horizontal/vertical multi-stage pumps of suitable rating and capacity, as indicated hereunder, factory mounted on a steel frame along with interconnected piping, valves, strainer, pressure gauge, pressure transmitter, flow meter to measure the make-up water quantity, control panel with duty cycling and dry-run protection, electrical relays/contactors and interconnecting wiring:The unit shall be capable of Pressurising the system to the required pressure with suction from a break-tank located at least 1m above pump level complete in all respect upto entire satisfaction of Engineer in Charge of work. BI01010001010000000000000515BI0100001147 95 Metre 35 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

36 Ball Valves without Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 32 mm dia BI01010001010000000000000515BI0100001148 25 Metre 36 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

37 Ball Valves without Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 25 mm dia BI01010001010000000000000515BI0100001149 1 Metre 37 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

38 Ball Valves without Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 40 mm dia BI01010001010000000000000515BI0100001150 1 Metre 38 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

39 Providing and fixing in position the following balancing valves (PN-16) as per specifications: complete in all respect upto entire satisfaction of Engineer in charge of work. Make : As per attached list . 250mm dia BI01010001010000000000000515BI0100001151 2 Metre 39 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

40 Providing and fixing in position the 250mm dia Check (Non return) valves (PN-16) as per specifications complete in all respect upto entire satisfaction of Engineer in charge of work. Make : Castle /Advance Make : As per attached list . 250mm dia BI01010001010000000000000515BI0100001152 8 Metre 40 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

41 Providing and fixing of 250mm dia Y strainer as per specifications of complete in all respect upto entire satisfaction of Engineer in charge of work. Make : Emerald / Rapid Cool / Sant Make : As per attached list . 250mm dia BI01010001010000000000000515BI0100001153 650 Metre 41 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

42 Providing and fixing in position the 25 mm dia water flow switch as per complete in all respect upto entire satisfaction of Engineer in charge of work. Make : Rapid Cool / Anergy Make : As per attached list . 25 mm dia BI01010001010000000000000515BI0100001154 530 Metre 42 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

43 Supply , installation , testing and commissioning of condensate heavy duty PVC drain water pipe complete with fittings like elbows, tees, reducers bends, MS flanges, supports, 25 mm thick EPS insulation etc. as required conforming to standard specifications and of following sizes. Make : Jindal / TATA / Parkash Surya 25 mm dia pipe BI01010001010000000000000515BI0100001155 10 Metre 43 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

44 Supply , installation , testing and commissioning of condensate heavy duty PVC drain water pipe complete with fittings like elbows, tees, reducers bends, MS flanges, supports, 25 mm thick EPS insulation etc. as required conforming to standard specifications and of following sizes.Make : Jindal / TATA / Parkash Surya 32 mm dia pipe BI01010001010000000000000515BI0100001156 1 Metre 44 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

45 Providing and fixing in position the 25 mm dia automatic purging valves complete in all respect upto entire satisfaction of Engineer in charge of work. Make : Rapid Cool / Anergy Make : As per attached list . 25 mm dia BI01010001010000000000000515BI0100001157 150 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 45 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

46 Supply, installation, testing and commissioning of Microbubble Air / Dirt Separator a combined Air and Dirt Separator of M.S construction as per specifications on the return water line located at the pump suction or a suitable location as suggested. The separator should be complete with high capacity air vent, service valve, butterfly valve, water inlet, flanges, drain valve etc. 250mm. BI01010001010000000000000515BI0100001158 150 Set 46 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

47 Acousting Insulation of Duct from inside with covered 10 mm open cell insulation complete in all respect upto entire satisfaction of Engineer in charge of work. As per attached list . BI01010001010000000000000515BI0100001159 1 Each 47 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

48 Supply, installation, testing and commissioning of Mild Steel Condenser Water piping of class “C”, ISI marked Under ground 300 MM with all necessary fittings i.e. bends, tees, supports etc. and with wrapping coating to complete the job in all respect with all labour and petty material upto the entire satisfaction of Engineer-in-Charge of work BI01010001010000000000000515BI0100001160 2500 Set 48 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

49 Supply, installation, testing and commissioning of Pot- Strainer (sspl) 350 mm dia conforming to standard specification. with foundation to complete the job in all respect with all labour and petty material upto the entire satisfaction of Engineer-in-Charge of work BI01010001010000000000000515BI0100001161 1 Each 49 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

50 CHILLED WATER PIPE INSULATION: Providing and Fixing Chilled water pipe insulation for pipe size 25 mm to 250 mm size including Valves and fittings with 50/25 mm thick EPS / NITRIL Pipe Section (TF Quality) covered with 2 layers of sand cement plaster each layer of 8 mm for exposed piping or 26 SWG Aluminium cladding over piping for indoor installation complete in all respect upto entire satisfaction of Engineer in Charge of work. BI01010001010000000000000515BI0100001162 1 Each 50 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

51 SITC of `Main A.C. Panel-P1- main panel boards made of 1.6/2.0 mm thick steel sheet duly powder coated complete with voltmeter, ammeter, indicating lights, selector switch, incoming/ outgoing isolators, current operated single phase preventor, CTS contactors, A/M Switch for remote controls operation complete as per specifications and drawings and as required.Incomer, 1 No. 800 Amps ACB 4 Pole incoming (MDO) 65 KA, 1 No. 1000 Amps aluminium conductor bus bar duly sleeved, 1 No. electronic energy meter with CTs., 1 No. Ammeter with ASS and CTs., 1 No. voltmeter with VSS., 3 Nos. phase indicating lamps, Outgoing, 1 No. 400-500 Amps TP plus NL MCCB MDO 50 KA outgoing for 350 TR chillers, 1 Nos. 630A ACB TP plus NL MDO 50 KA outgoing for 300 KW Hot water generator, 1 Nos. 63-100 Amps 25 KA MCCB TP plus NL outgoing for condenser water pumps with 50HP motor , 1 No. 63 Amps MCCB 25 KA outgoing for Cooling Tower with 7.5kw x 2 nos motor, 1 Nos. 63-100 Amps TP MCCB 25 KA outgoing for chilled water pumps with 25 HP motor, 1 Nos. 100 Amps MCCB TP plus NL outgoing for spare, 1 Nos. automatic type star delta starter for chiller water pumps (30HP), 2 No. Automatic Type DOL Starter for Cooling Tower (7.5 HPx 2Nos ), 1 No. Automatic Type Star Delta Starter for Condenser Water Pump (40HP), All starters shall have following accessories :, 1 No. overload relay, 1 No. Ammeter with ASS and CTs, `1 No. single phase preventer, 2 Nos. ON/OFF indicating lights, 2 Nos. ON/OFF push buttons, Powder Coated Enclosure made out of TATA/SAIL/ESSAAR make CRCA sheet having 2 mm for load bearing surfaces and 1.6 mm for non load bearing surfaces ,duly processed powder coated having Siemens grey colour.Hardware (PVC Channels/MCB Channels/Fibre-Glass/Gaskits/Sleeves/nuts/Bolts/washers/cooling fans/etc), Complete Wiring inclusive of thimbles,etc Note:ACB incomer to be BI01010001010000000000000515BI0100001163 8000 Job 51 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

52 4 pole with O/L,EF,SC, in the main panel with display (V/A) ACB makes Schnieder model MVS /LandT make ACB U-Power /Siemens, MCCB Make LandT / Schnieder (CVS) / Siemens, MCCB upto 100 Amps to be 25 KA with ICU=ICS=100%, MCCB above 100 Amps to be 35/36 KA with ICU=ICS=100%, Contactors make LandT (MNX)/Siemens (3TS) /Schnieder (TVS/TeSys), SPP make Minilec/LandT/Procom Make, Meters Schnieder/LandT/HPL/Procom/Nippen/Elmeasure, Selector switches LandT/HPL/Eaton/Kaycee, complete in all respect upto entire satisfaction of Engineer in Charge of work: Make :- Varindavan / SPC / Tricolite. BI01010001010000000000000515BI0100001164 8 Each 52 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

53 Suuplying, Installation, Testing and Commissioning of floor-mounted desk type Control Console in A/c plant room containing various indications and controls for the A.C. system comprising of 1 Nos. chilling machine, 2 Nos. pumps, 1 Nos. cooling tower, 65 Nos AHU/CSU with test push buttons facility. The panel shall be fabricated from minimum 1.633 thick M.S. Powder coated sheet of approved design. The A.C. module of the Central Control shall have the following accessories: Status indication (ON, OFF) for each compressor for each chilling machine and all pumps. Push Buttons and Indication lamps for remote start and stop and status indication for each of the AHUs. Push Buttons and Indication lamps for remote start and stop and status indication(ON, OFF and Fault) for each of the 2 Nos. Cooling Tower motors and low level indication for each of 2 Nos. cooling tower. Hooter and Flashing lamps to indicate operation of any safety/shut down with necessary contractors, accept, reset and test push buttons complete as per specifications to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work. As per attached list . BI01010001010000000000000515BI0100001165 1000 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 53 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

54 Providing and Fixing of control cable of 6C x 1.5 Sqmm shielded and analyed tinned copper for inter locking. As per attached list . BI01010001010000000000000515BI0100001166 12 Each 54 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

55 AHU Distribution Panel INCOMERS: 1 Nos MCCB as per following details/ specification: 250 A, 35kA, TPN MCCB with in-built protection relays such as over load release, earth fault release, magnetic short circuit, auxiliary contacts, ROH, Spreaders and padlock facility shall contain the following: Voltmeter of 0-500V with VSS and one set of (RYB) phase indicating lights with 6A SP MCB Indicating lamps shall be protected by 6A MCB to indicate ON,OFF, TRIP for MCCB 0 - 500 amps 96 x 96 sq mm ammeter with 500/5 amps resin cast CT’s and selector switch. 1 set of under voltage relay BUSBAR: 375 A , 35 KA, TPN Aluminium busbar duly sleeved - 1 set Maximum density of aluminium bus bars for current carrying capacity shall be one amp per square mm. Outgoings: 16 nos TP MPCB, 40-63 A for AHU Motor Panel as described above and in drawings.with all labour and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of work BI01010001010000000000000515BI0100001167 1 Each 55 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

56 Pdg. and Fixing Trap Doors made up of Angle Iron of Size 35x3 mm with Hanging and supportive material , wooden board 6mm, paint as per ceiling colour, including all petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of work BI01010001010000000000000515BI0100001168 31 Each 56 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

57 SITC of 50mm PIBCV/High-Rangeability Control Valves/Delta-T Valves - for AHU Control valves for FCU/CSU/AHU of sizes upto 32mm dia shall be 2way high rangeability/PIBCV type of Brass construction of PN25 rating with screwed connections. The valve shall be rotary/ball type with rangeability of more than 300, Control valves for air handling units of sizes above 32 mm dia shall be 2way high rangeability/PIBCV type of Cast Iron construction of PN16 rating with flanged connections. The valve shall have linear stroke of minimum 15mm and rangeability of more than 300, The actuator shall be electronic motorised modulating type operating on 24VAC and 0-10Vdc or 4-20 mA control signal. The actuator shall have provision for 0-10Vdc position feedback signal and manual operation. It shall be possible to operate the valve manually and the actuator shall switch back to auto mode when power supply is restored. The valve actuator housing shall have IP54 protection, The actuator should be suitable for a valve close-up pressure of 1.5 times the pump head or a minimum of 4 bars, Flow Rate/size, complete in all respect upto entire satisfaction of Engineer in Charge of work: Make - ANERGY/Belimo/Siemens. BI01010001010000000000000515BI0100001169 85 Each 57 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

58 SITC of 65mm PIBCV/High-Rangeability Control Valves/Delta-T Valves - for AHU Control valves for FCU/CSU/AHU of sizes upto 32mm dia shall be 2way high rangeability/PIBCV type of Brass construction of PN25 rating with screwed connections. The valve shall be rotary/ball type with rangeability of more than 300, Control valves for air handling units of sizes above 32 mm dia shall be 2way high rangeability/PIBCV type of Cast Iron construction of PN16 rating with flanged connections. The valve shall have linear stroke of minimum 15mm and rangeability of more than 300, The actuator shall be electronic motorised modulating type operating on 24VAC and 0-10Vdc or 4-20 mA control signal. The actuator shall have provision for 0-10Vdc position feedback signal and manual operation. It shall be possible to operate the valve manually and the actuator shall switch back to auto mode when power supply is restored. The valve actuator housing shall have IP54 protection, The actuator should be suitable for a valve close-up pressure of 1.5 times the pump head or a minimum of 4 bars, Flow Rate/size, complete in all respect upto entire satisfaction of Engineer in Charge of work: Make - ANERGY/Belimo/Siemens. BI01010001010000000000000515BI0100001170 31 Each 58 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

59 Supplying of DIA 32 MM Balancing valves PN 16 rated without insulation for water circulation as per specification. with all labour and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of work. Make : Castle /Advance /Honeywell BI01010001010000000000000515BI0100001171 25 Each 59 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

60 Nos. BI01010001010000000000000515BI0100001172 147 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 60 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

61 Per Metre BI01010001010000000000000515BI0100001173 300 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 61 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

62 Rmt. BI01010001010000000000000515BI0100001174 100 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 62 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

63 [23.23.6..2]MISCELLANEOUS 6..2. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 200 X 50 X 2 mm [Through Rate] BI01010001010000000000000515BI0100001175 90 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 63 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

64 [23.23.6.1]MISCELLANEOUS 6.1. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 100 X 50 X 2 mm [Through Rate] BI01010001010000000000000515BI0100001176 2500 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 64 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

65 [23.23.6.3]MISCELLANEOUS 6.3. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the BI01010001010000000000000515BI0100001177 3900 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 65 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

66 job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 375 X 50 X 2 mm [Through Rate] BI01010001010000000000000515BI0100001178 100 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 66 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

67 [23.23.6.4]MISCELLANEOUS 6.4. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 600 X 50 X 2 mm [Through Rate] BI01010001010000000000000515BI0100001179 210 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 67 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

68 [24.1.12]EARTHING AND LIGHTENING ARRESTOR 12. Supplying and laying 6 S.W.G G.I. wire at 0.50 m below ground level from earth electrode including thimbles, soldering etc. as required. [Through Rate] BI01010001010000000000000515BI0100001180 100 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 68 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

69 [24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. [Through Rate] BI01010001010000000000000515BI0100001181 925 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 69 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

70 [24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. [Through Rate] BI01010001010000000000000515BI0100001182 195 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 70 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

71 [24.13.12]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 12. 6 Sq mm 4 core (Arm.) [Through Rate] BI01010001010000000000000515BI0100001183 258 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 71 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

72 [24.13.18]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 18. 10 Sq mm 4 core (Arm.) [Through Rate] BI01010001010000000000000515BI0100001184 940 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 72 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

73 [24.13.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 24. 16 Sq mm 4 core (Arm.) [Through Rate] BI01010001010000000000000515BI0100001185 200 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 73 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

74 [24.13.30]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 30. 25 Sq mm 3.5 core (Arm.) [Through Rate] BI01010001010000000000000515BI0100001186 200 40 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 74 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

75 [24.13.38]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 38. 35 Sq mm 3.5 core (Arm.) [Through Rate] BI01010001010000000000000515BI0100001187 280 40 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 75 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

76 [24.13.6]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 6. 4 Sq mm 4core (Arm.) [Through Rate] BI01010001010000000000000515BI0100001188 80 40 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 76 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

77 [24.13.88]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 88. 240 Sq mm 3.5 core (Arm.) [Through Rate] BI01010001010000000000000515BI0100001189 18 40 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 77 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

78 [24.2.7.2]LT CABLE 7.2. Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core [Through Rate] BI01010001010000000000000515BI0100001190 6 Each 78 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

79 [24.2.7.3]LT CABLE 7.3. Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core [Through Rate] BI01010001010000000000000515BI0100001191 320 Each 79 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

80 [24.2.7.6]LT CABLE 7.6. Supply and erection of suitable compression type brass cable glands for underground Cable :- 240 sqmm to Cable 3 to 32 Core [Through Rate] BI01010001010000000000000515BI0100001192 48 Each 80 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

81 [24.2.7.7]LT CABLE 7.7. Supply and erection of suitable compression type brass cable glands for underground Cable :- 300 sqmm to 400 sqmm Cable 3 to 3½ Core [Through Rate] BI01010001010000000000000515BI0100001193 18 Each 81 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

82 [24.2.8.12]LT CABLE 8.12. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 185 sqmm [Through Rate] BI01010001010000000000000515BI0100001194 300 Each 82 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

83 [24.2.8.13]LT CABLE 8.13. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 240 sqmm [Through Rate] BI01010001010000000000000515BI0100001195 300 Each 83 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

84 [24.2.8.14]LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm [Through Rate] BI01010001010000000000000515BI0100001196 440 Each 84 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

85 [24.2.8.15]LT CABLE 8.15. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 400 sqmm [Through Rate] BI01010001010000000000000515BI0100001197 400 Each 85 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

86 [24.2.8.3]LT CABLE 8.3. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm [Through Rate] BI01010001010000000000000515BI0100001198 170 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 86 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

87 [24.2.8.4]LT CABLE 8.4. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm [Through Rate] BI01010001010000000000000515BI0100001199 200 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 87 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

88 [24.2.8.5]LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm [Through Rate] BI01010001010000000000000515BI0100001200 105 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 88 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

89 [24.2.8.6]LT CABLE 8.6. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm [Through Rate] BI01010001010000000000000515BI0100001201 200 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 89 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

90 [25.1.1]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 1. 300mm dia. [Through Rate] BI01010001010000000000000515BI0100001202 36 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 90 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

91 [25.1.10]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 10. 40mm dia. [Through Rate] BI01010001010000000000000515BI0100001203 36 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 91 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

92 [25.1.2]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 2. 250 mm dia [Through Rate] BI01010001010000000000000515BI0100001204 84 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 92 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

93 [25.1.3]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 3. 200mm dia. [Through Rate] BI01010001010000000000000515BI0100001205 100 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 93 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

94 [25.1.4]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 4. 150mm dia. [Through Rate] BI01010001010000000000000515BI0100001206 275 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 94 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

95 [25.1.5]Supplying, fixing, t BI01010001010000000000000515BI0100001207 150 32 mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 95 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

96 esting and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 5. 125mm dia. [Through Rate] BI01010001010000000000000515BI0100001208 1500 Each 96 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

97 [25.1.6]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 6. 100mm dia. [Through Rate] BI01010001010000000000000515BI0100001209 3 Each 97 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

98 [25.1.7]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 7. 80mm dia. [Through Rate] BI01010001010000000000000515BI0100001210 8 Each 98 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

99 [25.1.8]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 8. 65mm dia. [Through Rate] BI01010001010000000000000515BI0100001211 6 Each 99 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

100 [25.1.9]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 9. 50mm dia. [Through Rate] BI01010001010000000000000515BI0100001212 17 Each 100 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

101 [25.2]Extra for Supplying and fixing of insulation on following nominal dia pipes with FR quality expanded polystyrene moulded pipe section of density 20 kg/cum after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500 g polythene faced hessian and then applying 0.6 mm aluminium sheet cladding complete with felt strip at joints repairing etc. as per specifications and as required complete in all respect.. [Through Rate] BI01010001010000000000000515BI0100001213 2 Each 101 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

102 [25.3.1]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 1. 300mm dia. [Through Rate] BI01010001010000000000000515BI0100001214 6 Each 102 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

103 [25.3.2]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 2. 250 mm dia [Through Rate] BI01010001010000000000000515BI0100001215 20 Each 103 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

104 [25.3.3]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 3. 200mm dia. [Through Rate] BI01010001010000000000000515BI0100001216 1 Each 104 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

105 [25.3.4]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 4. 150mm dia. [Through Rate] BI01010001010000000000000515BI0100001217 1 Each 105 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

106 [25.3.5]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 5. 125mm dia. [Through Rate] BI01010001010000000000000515BI0100001218 1 Each 106 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

107 [25.3.8]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 8. 65mm dia. [Through Rate] BI01010001010000000000000515BI0100001219 12 Each 107 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

108 [25.3.9]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 9. 50 mm dia. [Through Rate] BI01010001010000000000000515BI0100001220 2 Each 108 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

109 [25.4.1]Supplying, fixing, testing and commissioning o NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end and PN 16 pressure rating as specified. 1. 200mm dia. [Through Rate] BI01010001010000000000000515BI0100001221 1 Each 109 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

110 [25.5.1]Supplying, fixing, testing and commissioning o BALANCING VALVE flanged end and PN 16 pressure rating as specified. 1. 200mm dia. [Through Rate] BI01010001010000000000000515BI0100001222 13 Each 110 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

111 [25.5.6]Supplying, fixing, testing and commissioning o BALANCING VALVE flanged end and PN 16 pressure rating as specified. 6. 65mm dia. [Through Rate] BI01010001010000000000000515BI0100001223 3500 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 111 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

112 [25.5.7]Supplying, fixing, testing and commissioning o BALANCING VALVE flanged end and PN 16 pressure rating as specified. 7. 50mm dia. [Through Rate] BI01010001010000000000000515BI0100001224 1450 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 112 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

113 [25.6.1]Supplying, fixing, testing and commissioning o STRAINER flanged end and PN 16 pressure rating as specified. 1. 200mm dia. [Through Rate] BI01010001010000000000000515BI0100001225 30 25mm dia Ball Valves with Y Strainer complete in all respect upto entire satisfaction of Engineer in charge of work. 113 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

114 [25.6.6]Supplying, fixing, testing and commissioning o STRAINER flanged end and PN 16 pressure rating as specified. 6. 65mm dia. [Through Rate] BI01010001010000000000000515BI0100001226 74 Each 114 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words