Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹66.4 LAccepted-AOC SIDDHESHWAR INFRASTRUCTURE DHARASHIV PROP SIDDHESHWAR INFRASTRUCTURE DHARASHIV DHARASHIV | DHARASHIV | DHARASHIV | MAHARASHTRA | L1 | Accepted-AOC L1 | |
| 2 | L2₹78.8 L+₹12.4 L (18.7%)Rejected-Finance AT POST KHWAJA NAGAR TQ OSMANABAD | OSMANABAD | OSMANABAD | MAHARASHTRA | L2 | Rejected-Finance L2 | |
| 3 | L3₹91.8 L+₹25.4 L (38.2%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹20 L
EMD Value
₹20,000
Closing Date
8 May 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief OfficerMC Dharashiv
MC Dharashiv
Maintenance works and supplying of ISI mark material for Dharashiv city water supply scheme Source-Ujani,Terna,Ruibhar
2023_DMA_894975_3
MC/Water/2023-24/1
Open Tender
Support/Maintenance Service
Item Rate
365 days
MC Dharashiv
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
₹20,000
5 Sept 2023
18 Apr 2023
9 May 2023
18 Apr 2023
8 May 2023
18 Apr 2023
Amount
Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.
Excavation for foundation / pipe trenches in slush muddy / marshy / slushy / soil including use of poclain, labour for dewatering during execution including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, preparing the bed by cleaning the mud, labour required for execution for shuttering item but excluding backfilling, etc. complete. Providing and fixing shuttering shall be paid separately.
Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge.
Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.
Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete.
Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete.
Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete.
Providing structural steel work in rolled stanchions fixed with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connecting to truss members and like as per detailed designs and drawings or as directed by Engineer-in-charge including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting,etc. complete.
Providing structural steel work in single stanchions composed of RSJ, channel, etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineerincharge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete.
Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. PCC M-150
Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)In RCC M-200
Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) In RCC M-250
Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire).Tor Steel
Providing and laying in situ Ready Mix Cement Concrete grade of trap / granite / quartzite / gneiss metal for RCC works in foundation like raft, grillage, strip foundation and footing of RCC column and steel stanchions including normal dewatering, form work, compaction, finishing and curing including transporting from mixing plant upto distance of 25 km., pouring the concrete at work site for 1.5 M lift above G.L. and 5.0 M lift below G.L., etc. complete. (Excluding reinforcement and structural steel) In RCC M-250
Dismantling dead pipeline of M.S./ R.C.C./ C.I./ P.S.C. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with all leads and lifts including cleaning the surface, etc. complete.,i)300 mm
iii) 400 mm
Dismantling dead pipeline ofG.I./ A.C./ P.V.C./ S.W./ H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with all leads and lifts including cleaning the surface, etc. complete.,i)300 mm
iii) 400 mm
Pushing of M.S. pipes of following dia for road crossing and railway crossing by push through method in all types of strata by using hydraulic jack and drilling machine of required diameter of below M.S. casing pipes, lowering, laying , jointing of material, required welding machinery, tripod, shain -pulley block crain, blower, compressor, loading and unloading of machinery into the trench, etc. transportation and dewatering, etc complete, as directed by engineer-incharge but excluding the cost of M.S.pipes a) 200 mm to 499 mm dia MS pipe
b) 500 mm to 1000 mm dia MS pipe
Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gaskets i)300 mm
iii) 400 mm
Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete.,i)300 mm
iii) 400 mm
Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon,loading into truck transport to stores, unloading etc. complete as directed by Engineer-in-charge.i) 300 mm
iii) 400 mm
Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.MS barrels (pipe pieces) locally manufactured (for small quantities)
Erecting and hoisting in position and jointing, testing M.S./ C.I. D/F pipes and specials in vertical position including cost of all jointing materials (rubber packing, nut bolts, etc.) labour, scaffolding, hydraulic testing etc. complete.i) 80 mm
iii) 125 mm
vii) 300 mm
viii) 350 mm
xii) 600 mm
Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc. a)80 to 300 mm dia.
b) 350 mm & above dia.
Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket bend 90 degree i)80 mm dia
ii)100 mm dia
iii)150 mm dia
iv)200 mm dia
v)250 mm dia
vi)300 mm dia
vii)350 mm dia
viii)400 mm dia
ix)450 mm dia
x)500 mm dia
xi)600 mm dia
xii)700 mm dia
Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket bend 45 degree i)80 mm dia
ii)100 mm dia
iii)150 mm dia
iv)200 mm dia
v)250 mm dia
vi)300 mm dia
vii)350 mm dia
viii)400 mm dia
ix)450 mm dia
x)500 mm dia
xi)600 mm dia
xii)700 mm dia
Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket bend 22.5 degree i)80 mm dia
ii)100 mm dia
iii)150 mm dia
iv)200 mm dia
v)250 mm dia
vi)300 mm dia
vii)350 mm dia
viii)400 mm dia
ix)450 mm dia
x)500 mm dia
xi)600 mm dia
xii)700 mm dia
Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket bend 11.25 degree i)80 mm dia
ii)100 mm dia
iii)150 mm dia
iv)200 mm dia
v)250 mm dia
vi)300 mm dia
vii)350 mm dia
viii)400 mm dia
ix)450 mm dia
x)500 mm dia
xi)600 mm dia
xii)700 mm dia
Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket concentric reducer i)100 x 80 mm dia
ii)150 x 80 mm dia
iii)150 x 100 mm dia
iv)200 x 80 mm dia
v)200 x 100 mm dia
vi)200 x 150 mm dia
vii)250 x 80 mm dia
viii)250 x 100 mm dia
ix)250 x 150 mm dia
x)250 x 200 mm dia
xi)300 x 100 mm dia
xii)300 x 150 mm dia
xiii)300 x 200 mm dia
xiv)300 x 250 mm dia
xv)350 x 200 mm dia
xvi)350 x 250 mm dia
xvii)350 x 300 mm dia
xviii)400 x 200 mm dia
xix)400 x 250 mm dia
xx)400 x 300 mm dia
xxi)400 x 350 mm dia
xxii)450 x 350 mm dia
xxiii)450 x 400 mm dia
xxiv)500 x 350 mm dia
xxv)500 x 400 mm dia
xxvi)500 x 450 mm dia
xxvii)600 x 300 mm dia
Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket Tee with flange branch PN-10 i)80 x 80 mm dia
ii)100 x 80 mm dia
iii)100 x 100 mm dia
iv)150 x 80 mm dia
v)150 x 100 mm dia
vi)150 x 150 mm dia
vii)200 x 80 mm dia
viii)200 x 100 mm dia
ix)200 x 150 mm dia
x)200 x 200 mm dia
xi)250 x 80 mm dia
xii)250 x 100 mm dia
xiii)250 x 150 mm dia
xiv)250 x 200 mm dia
xv)250 x 250 mm dia
xvi)300 x 80 mm dia
xvii)300 x 100 mm dia
xviii)300 x 150 mm dia
xix)300 x 200 mm dia
xx)300 x 250 mm dia
xxi)300 x 300 mm dia
xxii)350 x 80 mm dia
xxiii)350 x 100 mm dia
xxiv)350 x 150 mm dia
xxv)350 x 200 mm dia
xxvi)350 x 250 mm dia
xxvii)350 x 300 mm dia
xxviii)350 x 350 mm dia
xxix)400 x 80 mm dia
xxx)400 x 100 mm dia
xxxi)400 x 150 mm dia
xxxii)400 x 200 mm dia
xxxiii)400 x 250 mm dia
xxxiv)400 x 300 mm dia
xxxv)400 x 400 mm dia
xxxvi)450 x 100 mm dia
xxxvii)450 x 150 mm dia
xxxviii)450 x 200 mm dia
xxxix)450 x 250 mm dia
xxxx)450 x 300 mm dia
xxxxi)450 x 350 mm dia
xxxxii)450 x 400 mm dia
xxxxiii)450 x 450 mm dia
xxxxiv)500 x 100 mm dia
xxxxv)500 x 150 mm dia
xxxxvi)500 x 200 mm dia
xxxxvii)500 x 250 mm dia
xxxxviii)500 x 300 mm dia
xxxxix)500 x 400 mm dia
Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. flangeSocket PN-10 i) 80 mm dia
ii)100 mm dia
iii)150 mm dia
iv)200 mm dia
v)250 mm dia
vi)300 mm dia
vii)350 mm dia
viii)400 mm dia
ix)450 mm dia
x)500 mm dia
xi)600 mm dia
Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. Blank flange PN-10 i) 80 mm dia
ii)100 mm dia
iii)150 mm dia
iv)200 mm dia
v)250 mm dia
vi)300 mm dia
vii)350 mm dia
viii)400 mm dia
ix)450 mm dia
x)500 mm dia
xi)600 mm dia
Providing and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.MJ collar/coupling i) 80 mm dia
ii)100 mm dia
iii)150 mm dia
iv)200 mm dia
v)250 mm dia
vi)300 mm dia
vii)350 mm dia
viii)400 mm dia
ix)450 mm dia
x)500 mm dia
xi)600 mm dia
Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.,One collar should be supplied with each full length plain ended RCC pipe,One rubber ring should be supplied with each full length of socketed pipe,Class NP-III (For 2.00 m. length i)80 mm
iii) 150 mm
vii) 300 mm.
viii) 350 mm.
xii) 600 mm.
xiii) 700 mm.
xiv) 800 mm.
xvi) 1000 mm.
Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineerin- charge (For all class of pipes.) as per IS- 783-1985. i)80 mm
iii) 150 mm
vii) 300 mm.
viii) 350 mm.
xii) 600 mm.
xiii) 700 mm.
xiv) 800 mm.
xvi) 1000 mm.
Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) Without by pass arrangement -PN -1.6 i)300 mm.
iii) 400 mm.
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valves - PN -1.6 (Without by pass )i) 300 mm.
iii) 400 mm.
Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. omplete. (Rate for all class of valves. i) 300 mm.
iii) 400 mm.
Providing and supplying I.S.I. mark SBR rubber gasket suitable for C.I. or D. I. pipe of all class for tyton joints including inspection charges, transportation upto departmental stores excluding GST levied by GOI & GOM in all respect etc. complete. for C. I. / D.I. Pipes i) 300 mm
iii) 400 mm.
Providing Rubber Gasket -EPDM Gaskets for C. I. / D.I. Pipes i) 300 mm.
iii) 400 mm.
Sealing ‘ O' Rings of SBR (for CID Joints)i) 300 mm
iii) 400 mm.
Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non-rising spindle resil-ient seated glandless sluice valves with handwheel &without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass,shaft of stainless steel 1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body& Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) 300 mm
iii) 400 mm.
Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed. i)300 mm dia
iii) 400 mm.
Supply of C. I. Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. i)300 mm dia
iii) 400 mm.
Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 10 mm thick i)200 mm dia
ii)250 mm dia
iii)300 mm dia
iv)350 mm dia
v)400 mm dia
vi)450 mm dia
vii)500 mm dia
Providing and applying primer and one coat of red oxide of iron paint internally to blast cleaned surface of the pipes.
Lowering, laying in position to correct line and level including M. S. pipes with / without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. completed as specified. i)200 mm dia
ii)250 mm dia
iii)300 mm dia
iv)350 mm dia
v)400 mm dia
vi)450 mm dia
vii)500 mm dia
Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. 10 mm.
Gas cutting (either square cut or V cut) pipes, plates, etc.
Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long For tape of 10 M length
Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material
Rent for JCB
Rent for chain pully block with tripod
Rent for welding set with Generator
Rent for Compressor with fuel
Rent for Concrete breaker & Compressor
Rent for poclain
Rent for Crane
Truck hire charges upto 20 km
Truck hire charges for 20 km to 50 km
Truck hire charges for 50 km & above
Jeep hire Charges with driver (Upto 300 Km)& fuel
Desludging / Desilting mud Pump with Operator
Pipe cutter with operator
Labour Suppying
Nut with Bolt
Rubber Gasket (6mm thick)
Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 M c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc.complete.
SAYYED RASHED SARTAJ
Krushna Majur Sahakari Sanstha Ltd Osmanabad
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .