CONSTRUCTION FOR UPGRADATION OF INFRASTRUCTURE FOR INCREASING M.B.B.S SEATS FROM 100 TO 150 AT GOVERNMENT MEDICAL COLLEGE, HALDWANI DISTRICT NAINITAL

Amount

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas including disposal of excavated earth upto a lead of 100m . Disposed earth to be laid in layers of 30 cms including watring , ramming , leveling etc. complete. Excavation in all kinds of soil.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. In all kind of soil

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete

Diluting and injecting chemical emulsion (chlorpyriphos/Lindane E.C 20% with 1% concentration) at the rate of one litre per hole at 300 mm c/c to all the horizontal and vertical surface of the excavation made for the foundation of the building, soil under floor,apron, back fill material and along all the faces of the walls for PRE/POST-CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) as per IS:6313 Part-II.

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting tomeet requirement of Tables 300.1 and300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Providing and laying in position cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size).

WBM Grading 1 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Specification Clause 404. By Mechanical Means

Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mmnominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) up to plinth

Reinforcement cement concrete works in walls (any thickness)inckuding attached pilaster buttresses plinths and strings course, fillers, collumns, pillers, piers abutments, posts and struts etc. upto floor five levels excluding cost of shuttering shutterings, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering shuttering including struttings, ropping etc. and removal of form for

Foundations, footings, bases for columns, etc. for mass concreate.

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Edges of slabs and breaks in floors and walls Under 20 cm wide

Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

Reinforcement for R.C.C. work including straightening, cutting, bending placing in position and binding all complete Using Thermo-Mechanically Treated Bars.

Making of drip course in slab and sunshades/ groove in plastered surface including supply of all materials labour T&P complete.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

All works upto plinth level

All works above plinth level upto floor V level

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in 1:6 (1 cement : 6 coarse sand)

Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means

Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. ties 300 mm long of 25x3 mm section at not less than 3 ties per sqm as per approved design.

Interlocking Concrete Block Pavement Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504

Half brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in 1:4 (1 cement : 4 coarse sand)

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.(Dencity of AAC Block must be 650kg/cum & above with grade 1 Qualify)

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineerin- Charge.(Dencity of AAC Block must be 650kg/cum & above with grade 1 Qualify) (The payment of RCC band and reinforcement shall be made for seperately).

Stone work (machine cut edges Veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately). Kota stone slabs exposed face dressed and rubbed. 25 mm thick

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade

Area of slab upto 0.50 sqm

Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick Granite work counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.

With 2nd class teak wood beading 62X19 mm

With 12 mm mild steel U beading

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. Complete 250 mm weighing not less than 150 gms

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium handles ISI marked anodised (anodic coating not) 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.With 12 mm mild steel U beading

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately).

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately).

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm).

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN16341:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately).

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-in-charge. The glass shall be clear, toughened, interlayered, non-wired fire resistant having 11 mm thickness of approved brand with 120minutes of fire resistance both integrity & radiation control (EW120) and minimum 15 min of insulation (EI15) and having a sound reduction of 37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-EU Certification.The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments).

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

Providing and fixing T-iron frames/ Z- Section frames for doors, windows and ventilato mild steel Tee or Z-sections, joints mitred and welded with 15x3 10cm long embedded in cement concrete blocks 15x10x10 cm of 1 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm no size) or with wooden plugs and screws or rawl plugs and screws or dash fastener or with fixing clips or with bolts and nuts as including fixing of necessary butt hinges and screws , MS grill made of squir bars and one priming coat of approved steel primer.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Fixing with adjustable lugs with split end tail to each jamb Profile B (Single pattam)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required

In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4 mm thick glass panes

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes

40mm thick 1:2:4 Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick

Providing and fixing glass strips in joints of terrazo/ cement floors. 40 mm wide and 4 mm thick.

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile

In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Providing and fixing Ist quality ceramic glazed wall tiles conf IS : 15622 (thickness to be specified by the manufacture ) of appr make in all colours, shades except burgundy, bottle green, black of size as approved by Engineer-in-Charge in skirting, risers of ste dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 c sand) and jointing with grey cement slurry @ 3.3kg per sqm i pointing in white cement mixed with pigment of matching sh complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thick to be specified by the manufacturer) of 1st quality conformin 15622 of approved make in colours such as White, Ivory, Grey,conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Ce Coarse sand) including pointing the joints with white cement matching pigment etc., complete.

Providing and laying vitrified floor tiles in Size of Tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying vitrified floor tiles in 600x600 mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477,in average 3mm thickness, including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in Size of Tile 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m²

Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat:With common burnt clay F.P.S. (non modular) brick tiles of class designation 10

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/ cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge.

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturer's specifications and as approved by Engineer-In-Charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., washing with water all complete. The contractor shall give guarantee for the perfomance of SRI and also the durabitity of coating, all complete as per direction of Engineer-in-Charge

12 mm cement plaster on fair side of single or half brick wall of mix 1:4 (1 cement : 4 fine sand)

12 mm cement plaster on fair side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand)

15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand)

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade for New work (two or more coats) over and including priming coat with cement primer

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. Metres With cement mortar 1:4 (1 cement: 4 fine sand)

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. For door/ window/ clerestory window

Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4 mm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within 50 metres lead as per direction of Engineer- in-Charge. (a) Internal Work - Exposed on wall

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge

1:3:6 or richer mix

1:4:8 or leaner mix

Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in cement mortar (Quantity in thousand Number)

Recover cost of brick (Quantity in thousand Number)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Dismantling of flushing cistern/wc pans of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Sunken

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. For vertical surface two coats @0.70 kg per sqm per coat

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.

All types of soil (400mm dia)

Rocky strata including Boulders (400mm dia)

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of 200 mm nominal size dia having minimum wall thickness 5.40 mm, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/plain bevel ended 200 mm nominal size dia pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of 200 mm dia size complete.

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of 200 mm dia size complete.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places. Note:- 2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories (1) Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr (2) Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.(3) Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml (4) Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm (5) Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test. Tests to be conducted on site. (6) Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)“For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.“ (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.

PVC Water Bar, Color : Black, Width : 300-1800 mm, Water Absorption : Max 0.15%, Material PVC,Polyvinyl chloride

Aluminium Window - Canvas with anealed glass, 2 track with 2 glass shutter and 1 mesh shutter 27mm series. only single shutter is sliding of glass another 2 shutter are fixed . 5mm thick clear float SS wire mesh 0.25mm thick wire dia. SS304

Stainless Steel Mortise Body Lock

Providing and fixing Sliding Aluminium Canvas with anealed glass 2 track with 2 glass shutter and 1 mesh shutter 27mm series. only single shutter is sliding of glass another 2 shutter are fixed . 5mm thick clear float SS wire mesh 0.25mm thick wire dia. SS304

Providing and fixing Sliding Aluminium Side hung openable with anealed glass, casement window in 40mm series, 5mm thick clear float

Supply & Installation of Manual Operated SSD made Door SS 304 door blade fillied with honey comb craft paper of required dimensions 4 sided blind fixed with rubber gasket all around shuuter size double shutter. Including 400x600 mm tougned glass vision panel and SS Door frame with 1.2 mm thick all steel hinges and fittings all complete as per direction Engineer In-Charge

Providing and fixing Armstrong H5184 Bio Guard Plain Bev. Teg False ceilling 600x600 With WW Channeled G14 Perf/G28 Perf

Water supply and sanitation Providing and fixing PVC soil, waste and vent pipes conforming to IS : 13592 Type A including jointing with seal ring c 5382 leaving 10 mm gap for thermal expansion, (i) Single sockete socketed pipes including all fittings like coupler , bends , tee etc complete. 110 mm diameter

Providing and fixing PVC soil, waste and vent pipes conforming to IS : 13592 Type A including jointing with seal ring c 5382 leaving 10 mm gap for thermal expansion, (i) Single sockete socketed pipes including all fittings like coupler , bends , tee etc complete. 75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion

Coupler(110 mm)

Bend 87.5 degree(110 mm)

.Shoe (Plain)(110 mm)

Providing and fixing S.W. Pipes Single sockete socketed pipes including all fittings like coupler , bends , tee etc complete 150 mm dia

Providing and fixing unplasticised -PVC pipe clips of approved desig unplasticised - PVC rain water pipes by means of 50x50x50m wood plugs, screwed with M.S. screws of required length incl cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 sand) and making good the wall etc. complete. 75 mm

Providing and fixing unplasticised -PVC pipe clips of approved desig unplasticised - PVC rain water pipes by means of 50x50x50m wood plugs, screwed with M.S. screws of required length incl cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 sand) and making good the wall etc. complete. 110 mm

Supply and fixing of 580 mm size white glazed vitrous China water closed Orissa WC pan including 100mm HCI pipe"P" or "S" trap with the rale and bend with CP brass hinses and rubber buffer 10 lit. capacity low level flushing cistern of approved make with fitting RS or CI brackets 30mm dia glaged flush pipe with fitting and clampes complete including fitting of cistern ,cutting and making good the wall and floor where required.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 200 mm

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510 mm bowl depth 200 mm

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe (32 mm dia)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Circular shape 450 mm dia

Rectangular shape 453x357mm

:Rectangular shape 1500x450 mm

Providing and fixing soil, waste and vent pipes :

100 mm dia (Sand cast iron S&S pipe as per IS: 1729 )

75 mm dia (Sand cast iron S&S pipe as per IS: 1729 )

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :

For 100 mm dia pipe

For 75 mm dia pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

100 mm dia (Sand cast iron S&S pipe as per IS: 1729 )

75 mm dia (Sand cast iron S&S pipe as per IS: 1729 )

Providing and fixing plain bend of required degree.

100 mm dia (Sand cast iron S&S pipe as per IS: 1729 )

75 mm dia (Sand cast iron S&S pipe as per IS: 1729 )

Providing and fixing heel rest sanitary bend

100 mm diameter (Sand cast iron S&S pipe as per IS: 1729 )

75 mm diameter (Sand cast iron S&S pipe as per IS: 1729 )

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :

100x100x100x100 mm(Sand cast iron S&S as per IS - 1729 )

75x75x75x75 mm (Sand cast iron S&S as per IS - 1729 )

Providing and fixing terminal guard : 100 mm (Sand cast iron S&S as per IS - 1729 )

Providing and fixing collar :

100 mm (Sand cast iron S&S as per IS - 1729 )

75 mm (Sand cast iron S&S as per IS - 1729 )

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989

100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS - 3989

Providing and fixing PTMT Bottle Trap for Wash basin and sink Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall

15 mm dia. nominal bore

20 mm dia. nominal bore

25 mm dia. nominal bore

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

80 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work)

15 mm dia. nominal bore

25 mm dia. nominal bore

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

80 mm dia. nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end) 50 mm nominal bore (Horizontal)

Providing and fixing gun metal non- return valve of approved quality (screwed end) 65 mm nominal bore (Horizontal)

Providing and fixing gun metal non- return valve of approved quality (screwed end) 80 mm nominal bore (Horizontal)

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 15 mm nominal bore

Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :

Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :With F.P.S. bricks

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

15 mm dia. nominal bore

20 mm dia. nominal bore

25 mm dia. nominal bore

32 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

65 mm dia. nominal bore

80 mm dia. nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 200 mm diameter S.W. pipe

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 300 mm diameter S.W. pipe

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

150 mm dia. R.C.C. pipe

250 mm dia. R.C.C. pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes.

Supply and installation of pump (2HP) Three phase Suc X Del 80 X 65, Head 30 mtr Flow 18.3 Lps, MOC Impeller CI,Pump Casing CI complete in all aspects as per direction of Engineer In-charge

Providing and fixing C.P. brass bib cock (Jequr continental) of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock (Jequr continental) of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore

Providing and fixing C.P. brass stop cock (Jequr continental) (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore

Providing and fixing CP Bottle Trap (Jequr continental) for Wash basin32 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal.

SOLAR WATER HEATER Supply and installation ,Testing and Commissioning of TATA make 500 LPD with 5 Collector Flat plate Collectors , Premium Closed Loop SS 304 Tank with HeatExchanger, Circulation Pump, Control Panel, Temperature Pressure, Relief Valves with electrical back up of 2 Kwatt . Complete With prefabricated MS hot dipped galvanized and painted mounting structure. Max. system operating Pressure- 1kg/cm² ,Max Water Temp. 90º C. complete in all aspects as per directions of engineer- in-charge

Off Grid Solar Power Plant Supply Installation and Commissioning of off Grid Solar Power Plant Polycrystalline PV Module of rating 300Wp with 72 Cells Module Mounting Structure for PV Module of capacity 50 KW, structure MS with Powder Coating (MNRE Approved ) : Ritika Solar / Vikram Solar/ IV/ Micromax Battery of 150 Ah (MNRE Approved ) Luminous / Exide/ Amron (for 03 hours backup) Off Grid Interactive 50 KVA Three / 1 phase String Inverter with MPPT- UTl, STATCON, UTL, Microtech & Luminouscomplete in all aspects as per directions of engineer- in-charge

Supply and installation of 10 KVA 180 V Solar Inverter with Solar Priority- 4 hours backup- Fully Automatic with 10200 watt pannel including 10 kVA Sine wave invt with digital display 180 V with Tubular Batteries , (325watt X 31) Solar Pannel in poly crystalline silicon, solar charge controller complete in all aspects as per directions of engineer- in-charge

Water purification system Supply installation, testing and commissioning of water purification system and filtrantion plant (make Kent or equivalent size 63x67) purifying water with reverse opmasmosis, UF membrane and Tbs control with purification capacity (40000 Ltr/Day) with twin membrane system , fully automatic operation (auto on & cut off facility) and corrosimfree life span (life not less than 7 years ) complete in all aspects including connections and placement as per directions of engineer-in-charge.

Medical Gas Oxygen Systems

8X8 Size Oxygen Manifold Complete with 16 Nos NRV , 16 Nos. Pig Tail Pipe and Middle Frame

2 X 2 Cylinder Complete Manifold Complete with 04 Nos. NRV , 04 Nos pig Tail Pipe ,Middle Frame and High Pressure Regulator

Oxygen Outlet with Matching Probe

Fully Automatic Pneumatically Operated Oxygen Control Panel

Oxygen Flow meter with Humidifier Bottle Imported

Oxygen HP Antistatic with Rubber Tube

VACUUM CENTRAL SYSTEMS

Two Vacuum Central Complete with Pump 5 HP Modal V255 with 1000 lt Vacuum Reservoir Complete Accessories etc.

Bacterial Filter Station and secretion traps

Vacuum outlet with Matching probe

Vacuum HP Tube with antistatic core

Ward Vacuum unit complete with Regulator , Collection Bottle (600 ml) collection Bottle Imported

Theater Vacuum unit complete with Regulator , Collection Bottle and adopter and Trolley Imported

COPPER PIPING WITH REQUIRED COPPER FITTINGS SIZE TO BE USED

Medical Grade 42 MM outer dia ,1.2 mm thic

Medical Grade 28 MM outer dia ,0.9 mm thic

Medical Grade 22 MM outer dia ,0.9 mm thic

Medical Grade 15 MM outer dia ,0.9 mm thic

Medical Grade 12 MM outer dia ,0.7 mm thic

AIR COMPRESSOR SYSTEM

02 Air Compressor 5 HP MAKE ANEST IWATA With Air Dryer MAKE TRIDENT, Micron Filter , 1000 lt Air Tank , Reducing System and All Accessories

Air Outlet 4 bar with Matching probe

Air Outlet 7 Bar with Matching probe Imported

Air HP Tube with antistatic core

NITROUS OXIDE SYSTEMS

02 X 02 Size Nitrous Oxide Manifold Complete with 8 Nos. Pig Tail Pipe and Middle Frame

Semi Automatic Pneumatically Operated Nitrous Oxide Control Panel Imported

1 X 1 Cylinder Emergency Nitrous Oxide Manifold Complete with 4 Nos. Pig Tail Pipe , Middle Frame and High Pressure Regulator

Nitrous Oxide Outlet with Matching Probe Imported

Nitrous Oxide HP Tube with antistatic core

CARBON DI OXIDE SYSTEM

02 X 02 Size Carbon di Oxide Manifold Complete with 8 Nos. Pig Tail Pipe and Middle Frame

Semi Automatic Pneumatically Operated Nitrous Oxide Control Panel

1 X 1 Cylinder Emergency Carbon di Oxide Manifold Complete with 4 Nos. Pig Tail Pipe , Middle Frame and High Pressure Regulator

Carbon di Oxide Outlet with Matching Probe

Carbon di Oxide HP Tube with antistatic core

BED HEAD PANEL Bed Head Panel 5 ft Long with Provision of Medical Gas Outlet , 4 Nos, Switch and Socket , Monitor Tray , IV Pole , SS Basket IV Stand , Vacuum Slider and Power Socket Indigenous

VALVE WITH VALVE BOX AND PRESSURE GAUGE (With SS Ball)

5 Service

3 Services

2 Services

FLOOR ISOLATION VALVE

AREA LINE PRESSURE ALARM (Digital ) Type

Area Line Pressure alarm up to 5 Gases

Area Line Pressure alarm up to 3 Gases

Area Line Pressure alarm up to 2 Gases

Networking SUB HEAD - STRUCTURED CABLING SYSTEM PASSIVE

Supply , Installtion , Testing and comissioning of CAT 6 UTP cable solid copper conductors Approved Makes: Belden/Siemon/Panduit/Der Wiser/Molex/Dlink

Supply , Installtion , Testing and comissioning of CAT6 information outlet (I/O) for Data, Voice & Wi-Fi rack end Approved Makes: Belden/Siemon/Panduit/Der Wiser/Molex/Dlink

Supply , Installtion , Testing and comissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination Approved Makes: Belden/Siemon/Panduit/Der Wiser/Molex/Dlink

Supply , Installtion , Testing and comissioning of CAT6 patch cord 3 feet for rack side switch termination for user End Approved Makes: Belden/Siemon/Panduit/Der Wiser/Molex/Dlink

Supply , Installtion , Testing and comissioning of CAT6 patch cord 7 feet for user termination to information outlet Rack End Approved Makes: Belden/Siemon/Panduit/Der Wiser/Molex/Dlink

Supply , Installtion , Testing and comissioning of 1, 2 and 4 port face plate white for I/O fixing at user side. Approved Makes: Belden/Siemon/Panduit/Der Wiser/Molex/Dlink

Supply , Installtion , Testing and comissioning of 42 U (600W/1000D) floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos of hardware pkts. Approved Makes: Poweride/MTS/Rittal/APC/APW

Supply , Installtion , Testing and comissioning of 12 U wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos of hardware pkts. Approved Makes: Poweride/MTS/Rittal/APC/APW

SUB HEAD- IP-PBX SYSTEM

Supply of IP Based voice Communication System with 04 Port Voicemail ,04 Port FXS ,04 Port FXO with CLIP Facility ,100 IP users License ,01 Nos. IP Operator Console,8 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, - Redundant server in active-redundant mode. Approved Makes: Alcatel -OXE /Cisco /Polycom/ barracuda/ netfortris/EPGY,Grandstream

Supply of Type 1 IP Phone . Graphic LCD display with backlight 1user accounts with multi-line appearance keys Local and company-wide phone directories Approved Make : Alcatel -OXE /Cisco /Polycom/ barracuda/ netfortris/Grandstream

Supply of Type 2 IP Phone 1 VoIP account , Full duplex speaker phone, IPV6, 2xLAN, PoE Approved Make : Alcatel -OXE /Cisco /Polycom/ barracuda/ netfortris/Grandstream

SUB HEAD- LOCAL AREA NETWORK ( LAN )

Supply, Installation, Testing & Commissioning of Core Switch with 12 Fiber SFP Port as per technical pecification Approved Make : Cisco/ / Juniper / HP/ Ruckus/Dlink

Supply, Installation, Testing & Commissioning of 24 Port POE+ Access having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE + and 2x 1G SFP+ uplink ports . Approved Make : Cisco/ / Juniper / HP/ Ruckus/Dlink

Supply, Installation, Testing & Commissioning of fiber Modules 1000BASE Approved Make : Cisco/ / Juniper / HP/ Ruckus/Dlink

Supply, Installation, Testing & Commissioning of Internet Security solution with minimum of 50 users from day one with one year subscription/license and flexibility to scale up to 75 users in future having 99% uptime with each level redundancy, single pane of glass for reporting multi-location and roaming users environment for all the asked features with minimum 3 months of logs retention capacity.Sophos/Palo Alto/Checkpoint/Fortinet

Supply , Installation , Testing and Comissioning of 802.11 a/b/g/n Indoor Wi-Fi- Access point ,dynamic radio management . Approved Makes:Cisco/ Juniper / HP/ Ruckus/Dlink

SUB-HEAD - IP CCTV SYSTEM

Supply , Installation , Testing and commissioning of CAT RG 6 cable solid copper conductors Approved Makes: Belden/Siemon/Panduit/Der Wiser/Molex/Dlink

Supply, Installation, Testing & Commissioning of 27 U Network Rack with 19''PDU 6 points 5 amp , Stationary shelf, Mounting Hardware(pac. Of 10) , Cable manager Horizontal 1U , Fan 230 vac 90 cfm top mounted . Approved Makes: Poweride/MTS/Rittal/APC/APW

Supply installation testing and commissioning of 2 MP AHD Dome camera ,UL,CE,FCC certified , Metal housing ,2.8mm - 12mm vari-focal lens, 1/4" CMOS sensor size , Shutter speed : 1/25 - 1/10,000 Sec , Min illumination : 0.1Lux @ (F1.2,AGC ON), 0.05 Lux with IR , Inbuilt IR LED , IR Distance upto 30 mtrs , IP 66 weather proof.Approved Make : Impulse,Bosch,Pelco,Vicon /UNV

16 Channel DVR , UL,CE,FCC certified , H.264 video compression , linux operating system , 16 channel analog input , 8 channnel IP input , 2 SATA HDD Slot , 8 TB HDD support in each slot , 2 X USB port , 1 X VGA , 1 X HDMI , Display resolution :Analog : 4MP / 3MP / 1080P / 720P / 960H ,IP : 4MP / 3MP / 1080P / 720P / 960H,Support Mobile Phones based on iPhone and Android operation system

Supply, Installation, Testing and Commissioning of Full HD 32 " LED Professional Display Panel. Approved Make :- Samsung ,panasonic ,Sony,philips

Supply, Installation, Testing & Commissioning of Suitable power supply for Camera. Approved Make : Protek/CPS/N-TEK

FIRE PROTECTION SYSTEM M.S. Pipes confirming to IS:1239 Pt - I Heavy grade Class-C for 15NB to 150NB and IS:3589 Gr 410 ERW Pipe (min 6mm thick) for 200NB & Above with suitable type Pipe fittings such as Reducers, Tees, elbows, flanges. including cutting, grooving, Welding, fixing in / on walls, ceiling by using suitable supports etc, as per drawings with painting as PO Red as per shade 536 of IS:5 for Above ground piping.

Installation Control Valve (Alarm Valve) with complete Accessories (a) 150NB

C.I. Butterfly Valves of PN 16 rating as per IS:13095 of following dia including necessary fittings like Companion flanges,nut ,bolt & gaskets etc. complete.

C.I. Butterfly Valves of PN 16 rating as per IS:13095 of following dia including necessary fittings like Companion flanges,nut ,bolt & gaskets etc. complete.

Flow Switch or Water Flow Detector to send an alarm to fire alarm panel. (a) 150NB

Sprinkler Test Assembly with 25mm Sight glass with 1 no. ball valve of 50NB and 1 no. ball valve of 25NB

Pressure Gauge of suitable range (0-16 bar), 100 mm diameter dial for pump sets completes with necessary Ball valves, siphon, Fittings like unions / colors / reducers etc.

Conventional Sprinkler quartzoid bulb type with 15mm screwed end connection of K 80 and orifice shall not be less than 12.7mm. Sprinklers with Chrome finished.

(a) Pendent Sprinkler 68 deg. C

(b) Sidewall Sprinkler 68 deg. C

Spare Sprinkler as per IS 15105 quartzoid bulb type with 15mm screwed end connection of 68 deg. C. temperature rating, K 80 and orifice shall not be less than 12.7mm.Sprinklers with Chrome finished.

(a) Pendent Sprinkler 68 deg. C

(b) Sidewall Sprinkler 68 deg. C

Sprinkler Annuncian Panel (12 window)

Cabling for connecting flow switch to sprinkler panel (a) 2c x 1.5 mm FRLS Armoured Copper cable

Chilli Clamp Supports with anchor fasteners, clamps, threaded rods, nuts, bolts, washers etc. complete with painting.

Structural Steel Supports such as MS channels, angles, flats, rods as required at site with anchor fasteners, clamps, threaded rods, nuts, bolts, washers etc. complete with painting.

A - FIRE PUMPS AND ACCESSORIES Electrical Motor Driven Main Pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2280 LPM at 88 MWC. The pump shall be coupled to TEFC motor of suitable HP with speed of 2900 RPM and complete set shall be mounted on common base frame.

Electrical Motor Driven Jockey Pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 180 LPM at 88 MWC. The pump shall be coupled to TEFC motor of suitable HP with speed of 2900RPM and complete set shall mounted on common base frame.

Cast Iron Body flanged 'Y'- type Strainer with SS Perforated screen complete with suitable flanges, nuts, bolts, gaskets etc. complete.

Bronze Ball Valve suitable for test pressure of not less than 15 Kg / sqcm of the following size including providing necessary union / flange.

C.I. Dual Plate Wafer Type Check Valve of PN 16 rating including necessary fittings like Companion flanges,nut ,bolt & gaskets etc. complete.

C.I Foot Valve. Rate shall include for Gasket, nut, bolts & flanges.

Spring loaded 25 NB Pressure Relief Valve suitable for pressure of 15 Kg / sq.cm including flanges, nuts, bolts, washers etc. complete as required.

Pressure Switches of suitable range (0-16Kg/cm^2) complete for isolation and fittings such as unions / elbows / reducers etc.

Pressure Gauge of suitable range (0-16Kg/cm^2) complete for isolation and fittings such as unions / elbows / reducers etc.

MS fabricated Air Vessel at pump room about 450mm dia and 1500mm high on MS stand with necessary cut off drain and air release arrangements and leading the drain pipe to the sump at pump room.

Resilient rubber neoprene lined single arch Vibration Eliminators suitable for raw water up to 70 deg.C temperature working pressure 15 Kg per square centimetre.

Supplying and laying of Rubber Mat of size 1200mm x1000mm x 12mm thick

Control Panel for Electric / Diesel Pump with all necessary wiring work including control and instrumentation, etc complete.

Power / Control Cables of PVC insulated PVC sheathed, steel armoured, aluminium / copper conductor, 1100 V grade power cables.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required.

(a) 3C x 95sq.mm Aluminium for Main Pump

(b) 12C x 2.5 sq.mm Copper Armoured for Start/Push Button

(c) 3C x 16 Sqmm. Aluminium for Jockey

(d) 2C x 1.5 Sqmm. Copper Armoured for Instrumentation

Perforated G.I. sheet Cable Tray with neccessary angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm. Size of the tray is

(a) 300mm x 40mm and 2mm thick.

(b) 150mm x 40mm and 2mm thick.

G.I. Earthing Strips, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with neccessary accessories as required. ( Earth pit shall be executed by other agencies).

(a) 25mm x 3mm thick

(b) 50mm x 6mm thick

Fire Brigade drawout connection with 100NB dia GI (Heavy Class) pipe and foot valve (pipe max. 8 M. long)

(b) (b) 100NB dia GI (Heavy Class) pipe (max. 8 M. long)

(c) 100NB foot valve

4 Way Fire Brigade Inlet connection near suitable location with all other accessories located in Fire Water Tank.

Structural Steel Supports such as MS channels, angles, flats, rods as required at site with anchor fasteners, clamps, threaded rods, nuts, bolts, washers etc. complete with painting.

Priming Tank of capacity 1000 Ltrs.

B - EXTERNAL FIRE HYDRANT SYSTEM

M.S. Pipes confirming to IS:1239 Pt - I Heavy grade Class-C for 15NB to 150NB and IS:3589 Gr 410 ERW Pipe (min 6mm thick) for 200NB & Above with suitable type Pipe fittings such as Reducers, Tees, elbows, flanges. including cutting, grooving, Welding, fixing in / on walls, ceiling by using suitable supports etc, as per drawings with painting as PO Red as per shade 536 of IS:5 for Under ground piping. ( External Work)

S.S metal Single Headed fire Hydrant Valve with 80 N.B. flanged inlet, brass spindle controlled 63mm dia female instantaneous outlet type. S.S coupling, blank cap, chain, twist release type lug & all accessories Complete.

63mm dia instantaneous pattern Branch Short S.S pipe, 20 mm dia nozzle confirming to IS 903, suitable for inter connection to hose pipe coupling complete as required.

63mm dia Hose pipe Controlled Percolating Hose as per IS 8423 Type-1 15 M X 1 No. standard length including gun metal male and female Coupling duly bound with aluminium wire, etc.

Weather proof lockable Cabinet of size not less than 750 x 600 x 250 mm made out of MS sheet of 16 gauge thickness having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked FIRE on the outside.

4 Way Fire Brigade Inlet connection in Mains near suitable location with Butterfly valve-150NB and Non return valve-150NB with all other accessories located in Fire Water Line.

Excavation in all types of soil for laying pipes up to 300mm dia. including forming bottom surface to required level, refilling sand till 200mm around the pipe in layers 150mm thick, watering, consolidating and disposing off the surplus earth within the site as directed by the site engineer. (a) Depth upto 1.50 m.

(b) Sand filling

Wrapping & Coating for underground pipe Wrapping Tape (150mm wide x 4mm thick)

Valve Chamber with 350 mm Brick masonry wall with best quality TM bricks & CM 1:4,on a PCC 1:4;8 bed of 100 mm thick.The wall shall be plastered internally smooth in CM 1:3, water proofing as required and externally rough plastered with sponge finish, including curing. The chamber shall be provided with M.S. 6 / 8 mm thick plate fabricated top cover in leaves with neccessary hinges and locking arrangement. The size of the chamber shall be 1200mm x 1200mm x1000mm in depth.

C - INTERNAL FIRE HYDRANT SYSTEM

S.S metal Single Headed fire Hydrant Valve with 80 N.B. flanged inlet, brass spindle controlled 63mm dia female instantaneous outlet type. S.S coupling, blank cap, chain, twist release type lug & all accessories Complete.

63mm dia instantaneous pattern Branch Short S.S pipe, 20 mm dia nozzle confirming to IS 903, suitable for inter connection to hose pipe coupling complete as required.

First Aid Hose Reel of 180 swinging type with 30 mts long and 19 mm dia heavy duty Rubber hose PVC nozzle, 20 mm dia globe valve stop cock, terminating with S.S coupling & triple purpose nozzle of 6mm outlet with shut off cock.

63mm dia RRL Hose pipe Reinforced Rubber Lined as per IS 636 Type-A 15 M X 1 No. standard length including stainless steel male and female Coupling duly bound with aluminium wire, etc.

Standard Fireman's Axe with heavy rubber handle.

Weather proof lockable Cabinet of size not less than 750 x 600 x 250 mm made out of MS sheet of 16 gauge thickness having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked FIRE on the outside.

Fire Hose Door (FHC) door size (approx) (H)2100 x (W)1200 with hinged door shutter and frame and fabricated out of 14 SWG sheet steel, fitted with 4mm thick toughened glass in the front including finishing with powder coat painting complete.

E - TERRACE ARRANGEMENT 25 NB Gun Metal Air Release Valve suitable for pressure of 15 Kg / sq.cm including flanges, nuts, bolts, washers etc. complete as required.

Pressure Gauge of suitable range (0-16Kg/cm^2) complete for isolation and fittings such as unions / elbows / reducers etc.

F - PORTABLE FIRE EXTINGUISHERS Water CO2 type Fire Extinguisher 9 Ltr capacity.

ABC type Fire Extinguisher 6 Kg capacity.

DCP type Fire Extinguisher 6 Kg capacity.

Foam type Fire Extinguisher 50 ltr capacity trolley mounted.

Latitude 2-8 Loop Analogue Addressable Panel, 2 Loop on board, expandable upto 8 Loop. Colour 7" 800x480 touchscreen graphic display. 9999 event logs, Configurable via USB port to PC or memory stick, provided with 2 ancillary Serial Ports, Compliant with EN54-2, EN54-4.

K758 - 2 Loop Card for Latitude Series Panel, Connects 127 Hochiki devices on each loop.

Photoelectric Smoke Sensor incorporating Hochiki s unique High Performance Chamber which allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms.

Heat Sensor incorporating a variable Fixed Temperature heat element and Rate Of Rise heat element, both controlled from the Control Panel allowing either thermal element or both elements simultaneously to be active in making the fire decision.

Multi-Heat Sensor incorporating a thermal element and a High Performance photoelectric smoke chamber. Has three modes controlled from the Control Panel, allowing either the optical or thermal element or both to be active in making the fire decision.

Surface mounting base for detectors.

Manual Call Point Isolator fully compatible with Hochiki s ESP analogue addressable protocol and featuring an integral short-circuit isolator (SCI). Features a bi-coloured LED to indicate either fire (red) or short-circuit (amber). Also features plugin wiring terminals for easy installation.

Surface mounting base for manual call point.

Addressable Loop-Powered Wall Sounder with beacon providing 8 volume levels and 51 tones with a maximum output of up to 102 dB(A) ( 2 dB(A)) with low current consumption. Special bases available: YBO-R/3(RED), YBO R/SCI(RED), YBO-R/3(WHT) and YBO-R/SCI(WHT-SNDR).

Surface mounting base for sounder cum strobe.

Isolator Base which is fully compatible with hochiki's ESP Range of Sensors, Beacons, Sounders and Indicators. The unit incorporates an amber LED to show whhen it is isolating a section of the loop.

Mounting Accessories like back box of Smoke detector, heat detector, multi detector, hooter & MCP; cable glands etc.

2C x 1.5 Sq.mm unarmoured cable

MECHANICAL VENTILATION

CABINET TYPE CENTRIFUGAL FANS Floor Mounted Centrifugal (DIDW) Rectangular Cabinet type forward curved impeller fan complete with 3 phase 415 VAC fan motor TEFC Eff-1 with class 'F' insulation, V-belt drive, vibration isolators, starter, outlet damper, all enclosed in a rectangular G S S Cabinet with flanged inlet and outlet, and other accessories as per enclosed technical specification for following performance parameters: For Lift Well Pressurization Air Quantity :- 5,500 CFM, Static Pressure :40mm WC

INLINE FANS Supply, Installation, Testing & Commissioning of circular /rectangular inline fans for exhaust air complete with sheet metal casing, direct driven centrifugal fan, motor with proper protection and inspection door. Fan shall be suitable for operation on 220+6 % volts, 50 Hz,1phase AC power supply. Flanges to be provided on both sides to facilitate duct connections. Fan shall be installed as shown in the drawings and will be of following characteristics : All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be complete with Plug Top & necessary power cable. CFM S-WC

IF-1-14(Circular) 150 10 -15

IF-15-40( Circular) 200 10 - 15

IF-41-43(Circular) 450 15 -20

IF-44-55( Circular/Rrectangular) 650 20 - 25

IF-56-58( Circular/Rectangular) 750 20 - 25

Basement Ventilation BASEMENT VENTILATION Floor Mounted Centrifugal DIDW forward curved impeller fan complete with 3 phase 415 VAC fan motor TEFC Eff-1 with class 'F' insulation, V-belt drive, base frame, vibration isolators, starter, outlet damper, with flanged outlet, and other accessories as per enclosed technical specification for following performance parameters: Perforamnce Parameters Air Flow : 18,500 CFM Static pressure: 50 mm of WC

Air Distribution System SUPPLY/RETURN AIR /GRILLES Supply and erection of supply/return air grilles in powder coated extruded aluminum construction with volume control dampers.

SUPPLY/RETURN AIR DIFFUSER Supply and erection of supply/return air diffusers in powder coated extruded aluminum construction with volume control dampers.

DUCT DAMPERS Opposed blade type duct dampers in extruded aluminium construction with aerofoil shape blades.

FRESH AIR INTAKE LOUVER Supply, Installation and Testing of fresh air grilles of powder coated / anodised extruded aluminium with GI wire mesh, inlet louvers, Box type VCD & bird screen, as per the approved shop drawings and specifications.

G.I. DUCTING WORK - FACTORY FABRICATED Supply, installation, testing and comissioning GI Ducting complete with RTV sealant filled joints including necessary supports, hangers, nut bolts, gaskets, splitter dampers, vanes, canvas connections etc all as per enclosed specifications.

18 Gauge

20 Gauge

22 Gauge

24 Gauge

26 Gauge

CANVAS Connection Supply, installatio of fire retardant imported CANVAS Connection for Ductable Unts

Insulation Work Thermal insulation for air-conditioning ducting with 9mm thick closed cell nitrile rubber class O as per enclosed specifications.

Supply, fabrication and installation of acoustic lining of supply and return air ducts as specified and shown on the drawing complete with 10 mm thick acoustic insulation with Open Cell Foam Insulation - Armasound Microban antimicrobial product protection with Thermal conductivity 0.045 W/m deg.K / density 140~180 kg/m3, with manufacturer recommended adhesive 520 bonding.

FLOOR MOUNTED TREATED FRESH AIR UNITS casing ei 30 (with special insulation) fire retardent exhaust air damper sound attenuator spacer section viewing glass in inspection hatch plug fan with health care complaint filter section, heating, cooling and recirculatory air coil section Capacity : 10000 CFM

ELECTRICAL WORKS VENTILATION FANS Supply, installation, testing and commissioning of starter panels for basement ventilation fans (7.5KW Motor). The panel shall have 63 A 4 Pole MCB with Star Delta Starter/DOL, overload relay, start/stop buttons, phase indication lights with protection fuse, single phase preventer with auto/manual mode slector switch including controls and interlocking accessories. Make of Coponents: L&T / SIEMENS / SCHNEIDER

Electrical Works Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

2x4 sq.mm + 1x4 sq.mm earth wire.

4x4 sq.mm + 2x4 sq.mm earth wire.

4x16 sq.mm + 2x6 sq.mm earth wire.

TLWGEC Telephone wiring in PVC conduit: Supplying and drawing 2 Pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

PVCCON S/F PVC conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including painting in case of surface conduit, or cuttting the wall and making good the same in case of recessed conduit as required.

MB S/F metal boxes: Supplying and fixing metal box of 75 mm X 75 mm X 60 mm deep sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.

PTSWEB S/F modular type switch/ socket: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

3 pin 5/6 amp socket outlet

Telephone socket outlet

MODFREB S/F modular type electronic fan regulator: Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

LPACCPT S/F light plug point modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

PPACCPT S/F power plug point modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

CREB S/F ceilling rose: Supplying and fixing 3 pin, 5 amp. ceilling rose on the existing junction box/ wooden block including connection etc. as required

BRHOLD S/F brass holder: Supplying and flxing brass batten/angle holder including connection etc. as required.

Call Bell/Buzzer: Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

ITCFFSUR ITC fluorescent fitting directly on surface: Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

ITCCFFC ITC ceiling fan with cover on fan box: Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq, mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

ITCEF450 ITC exhaust fan upto 450 mm sweep: Installation of exhaust fan upto 450 mm sweep in the existingopening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.

LOUSHEF Fixing louvers/shutters for exhaust fan: Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes.

PWTPMCBDB S/F TP MCB DB: Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way (4 + 24), Double door

6 way (4 + 18), Double door

4 way (4 +12), Double door

MCBTPIS S/F TP MCB isolator: Supplying and fixing 63 amps rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissoning etc. as required.

MCBC S/F 'C' curve, SP MCB Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying and installing 600 mm width X 50 mm depth X 2.0 mm thickness size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

POWER WIRING FOR EQUIPMENT LAB Supply and Fixing Cable End Box (Loose Wire Box) suitable for following triple pole and netural sheet steel, MCB distribution board 415 Volt on surface/recess complete with testing and commissioning etc as required.

4 Way Double door TPN MCBDB

6 Way Double door TPN MCBDB

8 Way Double door TPN MCBDB

Supplying and Fixing 30 A, 415 V TPN industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "c" curve, TPMCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connection, testing and commissioning etc as required.

Supplying and Fixing 20A, 240V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alongwith 20 A "C" curve, SP, MCB in sheet steel enclosure, on surface or in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc as required.

Prividing and Fixing following capacity TP&N disconnctor fuse switch unit inside the existing panel board with ISI marked HRC fuse including drilling holes in cubical panel, making connections etc as required.

Providing and Fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicale panel board including drilling holes in cubical panel making connections etc as required.

100 A, 16 KA, TPMCCB

125 A, 16 KA, TPMCCB

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 900 mm width X 75 mm depth X 2.0 mm thickness

Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required. 2 run cable

MV CABLE LAYING WORK Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq.mm and upto 400 sq.mm

Laying and Fixing of one number PVC unsulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq.mm (Clamped with 1mm thick saddle).

Above 35 sq.mm and upto 95 sq.mm (clamped with 25x3 mm MS flat clamp).

EARGIPL G.I earth plate elctrode: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/ coke and salt as required..

EARG125X6 S/L 25 mm x 5 mm G.I. earth strip in ground: Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Earthing with copper earth plate 600 mmx 600mmx3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and water pipe of 2.7 metre long etc with charcoal/coke and salt as required.

Providing and Fixing 25 mm x 5mm copper strip in 40 mm dia G.I pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc as required.

Supply of AC 230/250 volts, 50 HZ energy efficient ceiling fan with standard down rod, blades, 3 nos. caps Model-ES 50 etc. complete in all aspects as per direction of Engineer in Charge

1200 mm sweep

900 mm sweep

Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete . Model- Ventil Air - DS (Make : Havells) 300 mm sweep 900 rpm ,complete in all aspects as per direction of Engineer in Charge.

Supply of heavy duty wall mounted fan - 400 mm dia Model - (D’zire) complete in all aspects etc. as per direction of Engineer in Charge

Supply & fixing of Ceiling Light -PLUTO NEO PANEL Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling (600X600mm) with electronic driver & high Brightness SMD LED's. Lamp Type 34 Watt LED 4000 ,6500 K . High efficiency diffuser IP 20 complete in all aspects like Ballast , housing connecting wire etc. as per direction of Engineer in Charge.

Supply & fixing of Recess Ceiling Light OCTANE LED PANEL ROUND Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture (110MM DIA) ith opal diffuser and separate electronic driver. 6W LED, 6500k /4000k/3000K (Code- LHEBHDP6IZ1W006) as per direction of Engineer in Charge. (Rate taken from Havells price list w.e.f. 2018).

Supply & fixing of LED Mirror Light -Providing & Installation of Linear & compact 9W ,4000k mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser.(for recess in wall ) connecting wire etc.of standard make (Havell's) as per direction of Engineer in Charge.

Supply and fixing of LED Tube light 20W (Code- LHEXBYPNIN1W020) ,Lumen Output- 3000, 4000, 6500K, Wall mounted LED batten (E-LITE LED TRIYCA) all in one fixture. complet in all aspects as per direction of Engineer in charge. (Rate taken from Havells price list w.e.f. 2018).

Supply and fixing of Power coated Regal Batten type luminaire 1x36W FTL HF 240v,50Hz etc, (Code- LHFYBYG1OB1W036) ,with electronic ballast, complet in all aspects as per direction of Engineer in charge. (Rate taken from Havells price list w.e.f. 2018).

Supply & fixing of Wall Mounted Personal LED Luminaire 31W, 5700k Cat No- LW04-411-XXX-57-XX (Rate taken from Wipro price list w.e.f. 2017).

SUPPLY OF LED Glass Bulb B22, 15 W ,6000k /4000k/3000K ,230/250 Volt,50 HZ ETC, complete in all aspects as per direction of Engineer in Charge.

Supply and fixing of BULK HEAD light- 1 X 8 W CFL bulk head in die cast aluminium housing & frosted glasses complet in all aspects as per direction of Engineer in charge.

Supply and fixing of C Cube Nurse call System, (NCS)

Supply and Fixing of DOME LIGHT (For Nurse Call System)

Supply,of following sizes of PVC sheathed LT XLPE armoured, aluminium 1.1KV grade, as required of the following sizes.

4c x 10 sq.mm cable

3.5c x 16 sq.mm cable

3.5c x 25 sq.mm cable

3.5c x 35 sq.mm cable

3.5c x 70 sq.mm cable

3.5c x 95 sq.mm cable

3.5c x 120 sq.mm cable

3.5c x 185 sq.mm cable

3.5 Core x 400 sq.mm Cable

Supply,of 1 core x 400 sq.mm Cable sizes of PVC sheathed LT XLPE armoured, copper 1.1KV grade, as required of the following sizes.

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required. 150 mm dia

Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres.

Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

Supply & fixing of 20W Solar LED street Light System, Solar Standalone Street Light system mentioned below includes LED street Light in built SCC,SPV Panel Battery, HDG Tubular Pole. Connecting Wire etc. of standard make (Havells) complete in all aspects as per direction of Engineer in Charge.

Supply and fixing of Decorative gate light Globe shaped post top lantern in frosted finish made up of Polycarbonate, suitable upto 27W retrofit LED (B-22 base).complet in all aspects as per direction of Engineer in charge.

Supply of 8.5 m long Tublor pole SP-23 with base plate and top cover plate complete in all respect with 23 watt LED light.

Supply of 250 KVA DG Set Comprising of KOELGREEN Make above model Diesel Engine- DV12TAG1 & BHP- 723, Alternator Three Phase 600 KVA/ 480 KW complete with standard Accessories complete in all aspects as per direction of Engineer In-charge

Supply and Fixing of HT Kit

HT CABLE LAYING WORK:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required Above 120 sq. mm and upto 400 sq. mm

MAIN L.T PANEL: Supplying installation, testing & commissioning of 415 V, 3 ph, 50Hz, 4wire system, sheet steel clad, dust & vermin proof cubical & indoor type floor mounted, free standing extendible type main LT panel with IP-42 Protection, compartmentalized design & fabricated out of 2 mm/1.6mm CRCA Sheet steel complete with Al.Bus bar electrical interlocks as per the various status of all the equipment indicates on the drawing.Providing & fixing of base plate chennel, p/f the following complete with earth bus bar throughout the length of the panel, terminal arrengment for incoming / outgoings cables & also outgoing termination for verious size of cables, the incoming & outgoing feeders shall be accommodated in a modular multi-tier arrenment adiquate size bus duct /cable Alliey, sign writing painting, earthing, numbring, danger plat etc. complet as requir as per specification & drawing . INCOMING 1 nos. 800 A 415V, 4P 65kA EDO ACB With microprocessor based release having O/L,S/C ,E/F , RPR, O/V, U/V protection & ON/OFF/TRIP Indication with MCB 2 nos. 800A 415V, 4P 65kA EDO ACB With microprocessor based release having O/L,S/C ,E/F , RPR, O/V, U/V protection & ON/OFF/TRIP Indication with MCB 3 nos. Digital type power analyser meters to show (V,A,KWh,KVAh,KW,KVA,KVAR,PF,Hz,harmonic) with cast resin CTs. & communication port. 3 set of LED phase indicating Lamps with MCB Protection 3 nos. trip circuit supervision relays. 3 nos. 50KVAR capacitor bank with 160 apm TP MCCB of 65 KA,with one set of indicating lights. 3 nos.electronic type dual type automatic power factor correction relay. 3 nos TPN surge protection device of class 1&2 3nos restricted earth fault . BUSBARS 2 Set of TPN AL bus bar of minimum of 2000A capacity with heat shrinkable coloured slabs & i/c DMC/SMC Bus bars suports at required intervals complete for cross section, size suports & their spacing etc. for with standing fault level of 65KA for 1 sec. BUS COUPLER 1 nos. 2000A 415 V, 4P 65KA EDO ACB with in built O/L, S/C protection & ON/OFF/TRIP indication with MCB OUTGOING 2 nos. 630A 415V, TP+N MCCB of 65KA with microprocessor based release having O/L, S/C protection & digital multi function to show (V,A,KWh,KVAH,KW,KVA,KVAR,PF,Hz ) with cast resin CTs.& comunication port. 6 nos. 250A 415V, TP+N MCCB of 65KA with microprocessor based release having O/L, S/C protection & digital multi function to show (V,A,KWh,KVAH,KW,KVA,KVAR,PF,Hz ) with cast resin CTs.& comunication port. 6 nos. 160A 415V, TP+N MCCB of 65KA with microprocessor based release having O/L, S/C protection & digital multi function to show (V,A,KWh,KVAH,KW,KVA,KVAR,PF,Hz ) with cast resin CTs.& comunication port.

Supply of 8.5 m long Tublor pole SP-23 with base plate and top cover plate complete in all respect.

AUTOMATIC POWER FACTOR CONTROL PANEL(EEP) 400KVAR,IP Rating IP33, IP40, IP44, IP54, IP55, Single phase,three phase

Providing & Fixing Lightning Arresters System (Building protection)

AUTOMATIC POWER FACTOR CONTROL PANEL(EEP) 350 KVAR,IP Rating IP33, IP40, IP44, IP54, IP55, Single phase,three phase

MAIN DISTRIBUTION BOARD:Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & vermin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,terminal arrangement for incomings/outgoings cables and also outgoing terminations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Compleete as requried,numbering, danger plate etc. complete as required as per specification and drawing. MDB-GR.FL. TO 4TH FL. INCOMER: 1 nos. 100A 415V, Ics=50KA, 4P MCCB with microprocessor release having O/L, S/C E/F,O/V & U/V protection. 1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 400/5A. 1 Set of phase indicating lamp with MCB 1 nosTPN surge protection device of class 1& 2 BUSBAR 100A TPN Bus bar of aluminimum alloy. OUTGOING 8 nos. 63A 415V, TP+N MCCB of 25KA with microprocessor based release having O/L, S/C protection. 2 nos. 32A 415V, TP+N MCCB of 25KA with microprocessor based release having O/L, S/C protection. 100 A change over switch.

Supply of 62.5 KVA DG Set Comprising of KOELGREEN Make above model Diesel Engine- 6SL1500TAG2 & BHP- 248, Alternator Three Phase 180 KVA/ 144 KW complete with standard Accessories complete in all aspects as per direction of Engineer In-charge

Supply, Installation, Testing and Commissioning of Distribution Transformer 125 KVA (Dry Type-UPI) Capacity 11/0433 KV having 11 KV, (Make-GTB) on 400 Amp 4P, Air ciucuit breaker (ACB) with microprocessor based reliesed on LT side having modualar construction of GI sheet steel. The enclosure shall have IP-54 dgree of protection for HT & LT switch gear comparment & IP23 degree of protection for transformer locking arrangment 433 V LT indoor panel with aluminium bus-bar fabrication using 50 x 6 mm GI strip CRGO grade complete with internal wiring and accessories.

Supply of HT Kit

MAIN L.T PANEL Supplying installation, testing & commissioning of 415 V, 3 ph, 50Hz, 4wire system, shitt steel clad, dust & vermin proof cubical & indoor type floor mounted, free standing extendible type main LT panel with IP-42 Protection, compartmentalized design & fabricated out of 2 mm/1.6mm CRCA Sheet steel complete with Al.Bus bar electrical interlocks as per the various status of all the equipment indicates on the drawing.Providing & fixing of base plate chennel, p/f the following complete with earth bus bar throughout the length of the panel, terminal arrengment for incoming / outgoings cables & also outgoing termination for verious size of cables, the incoming & outgoing feeders shall be accommodated in a modular multi-tier arrenment adiquate size bus duct /cable Alliey, sign writing painting, earthing, numbring, danger plat etc. complet as requir as per specification & drawing . INCOMING 2 nos. 400A 415V, 4P 65kA EDO ACB With microprocessor based release having O/L,S/C ,E/F , RPR, O/V, U/V protection & ON/OFF/TRIP Indication with MCB 2 nos. Digital type power analyser meters to show (V,A,KWh,KVAh,KW,KVA,KVAR,PF,Hz,harmonic) with cast resin CTs. & communication port. 2 set of LED phase indicating Lamps with MCB Protection 2 nos. trip circuit supervision relays. 2 nos. 50KVAR capacitor bank with 160 apm TP MCCB of 65 KA,with one set of indicating lights. 2 nos.electronic type dual type automatic power factor correction relay. 2 nos TPN surge protection device of class 1&2 2nos restricted earth fault . BUSBARS 1 Set of TPN AL bus bar of minimum of 500A capacity with heat shrinkable coloured slabs & i/c DMC/SMC Bus bars suports at required intervals complete for cross section, size suports & their spacing etc. for with standing fault level of 65KA for 1 sec. BUS COUPLER 1 nos. 400A 415 V, 4P 65KA EDO ACB with in built O/L, S/C protection & ON/OFF/TRIP indication with MCB OUTGOING 2 nos. 125A 415V, TP+N MCCB of 65KA with microprocessor based release having O/L, S/C protection & digital multi function to show (V,A,KWh,KVAH,KW,KVA,KVAR,PF,Hz ) with cast resin CTs.& comunication port. 11 nos. 63A 415V, TP+N MCCB of 65KA with microprocessor based release having O/L, S/C protection & digital multi function to show (V,A,KWh,KVAH,KW,KVA,KVAR,PF,Hz ) with cast resin CTs.& comunication port.

Supply of 85 m Long Tublor Pole SP-23 with base plate and top cover plate complete in all respect.

Automatic Power Factor Control Panel 50 KVAR, single phase, three phase.

Supply of 125 KVA DG Set Comprising of KOELGREEN Make above model Diesel Engine- DV12TAG1 & BHP- 723, Alternator Three Phase 600 KVA/ 480 KW complete with standard Accessories complete in all aspects as per direction of Engineer In-charge

COMPACT SUB STATION WORK Supply, installation, Testing and commissioning of of Distribution Transformer 160 KVA (Dry Type -UPI) Capacity 11/0.433KV having 11 KV, (Make-GTB) on 400 Amp 4P,Air circuit breaker (ACB) with microprocessor based reliesed on LT side having modular construction of GI sheet steel.The enclouser shall have IP-54 Dgree of protection for HT & LT switch gear comparment & IP23 degree of protection for transformer locking arrengement. 433V LT Indoor panel with aluminium bus-bar,Fabrication using 50x6 mm GI Strips CRGO Grade,complete with internal wiring and accessories.

HT CABLE WORK Supply of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required 35 Sq.mm Cable

Supply and Fixing Main Panel of 100 Amp. Incommer and 32 Amp. 02 No. Outgoing with suitable busbar.

Supplying and Fixing of 25 KVA Servo stabilizer.

Prividing and Fixing 63 A TP&N disconnctor fuse switch unit inside the existing panel board with ISI marked HRC fuse including drilling holes in cubical panel, making connections etc as required.

Supply and Fixing fire Alarm switch.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with piano type switch phenolic laminated sheet suitable size M.s box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. Group A

Prividing and Fixing 63 A TP&N disconnctor fuse switch unit inside the existing panel board with ISI marked HRC fuse including drilling holes in cubical panel, making connections etc as required.