GENERAL-CSR Fund - Wayanad HPC - Construction of Building for payipullu Anganwadi No.50 - tuvvur-Construction of Building for payipullu Anganwadi No.50 - tuvvur-General Civil Work

Work Name:GENERAL-CSR Fund - Wayanad HPC - Construction of Building for payipullu Anganwadi No.50 - tuvvur-Construction of Building for payipullu Anganwadi No.50 - tuvvur-General Civil Work

‴潣牡敳猠湡⁤稨湯ⵥ䥉⥉搠牥癩摥映潲慮畴慲潳牵散⁳›‸牧摡摥猠潴敮愠杧敲慧整㐠‰浭渠浯湩污猠穩⁥敤楲敶⁤牦浯渠瑡牵污猠畯捲獥鄩⸵⸹㨳敃瑮牥湩⁧湡⁤桳瑵整楲杮椠据畬楤杮猠牴瑵楴杮‬瑥⹣愠摮爠浥癯污漠⁦潦浲映牯区獵数摮摥映潬牯ⱳ爠潯獦‬慬摮湩獧‬慢捬湯敩⁳湡⁤捡散獳瀠慬晴牯칭⸵㈲㘮区整汥爠楥普牯散敭瑮映牯删䌮䌮眠牯湩汣摵湩⁧瑳慲杩瑨湥湩Ⱨ挠瑵楴杮‬敢摮湩Ⱨ瀠慬楣杮椠潰楳楴湯愠摮戠湩楤杮愠汬挠浯汰瑥⁥灵潴瀠楬瑮⁨敬敶呬敨浲‭敍档湡捩污祬吠敲瑡摥戠牡⁳景朠慲敤䘠ⵥ〵䐰漠⁲潭敲欀汩杯慲䁭㌱ㄮㄮㄺ′浭挠浥湥⁴汰獡整⁲景洠硩ㄺ㐺⠠ㄠ挠浥湥⁴›‴楦敮猠湡⥤@㄀⸳㘱ㄮ㘺洠散敭瑮瀠慬瑳牥漠⁦業㩸㨱″ ‱散敭瑮㨠㌠映湩⁥慳摮츩㌱㐮⸶㨱楆楮桳湩⁧慷汬⁳楷桴䄠牣汹捩匠潭瑯⁨硥整楲牯瀠楡瑮漠⁦敲畱物摥猠慨敤为睥眠牯吨潷漠⁲潭敲挠慯⁴灡汰敩⁤⁀⸱㜶氠牴ㄯ‰煳癯牥愠摮椠据畬楤杮瀠楲業杮挠慯⁴景攠瑸牥潩⁲牰浩牥愠灰楬摥䀠㈠㈮‰杫ㄯ‰煳⥭’㔀㤮ㄮ⸶㨱敃瑮牥湩⁧湡⁤桳瑵整楲杮椠据畬楤杮猠牴瑵楴杮‬瑥⹣愠摮爠浥癯污漠⁦潦浲映牯਺摅敧⁳景猠慬獢愠摮戠敲歡⁳湩映潬牯⁳湡⁤慷汬啳摮牥㈠‰浣眠摩ե敭牴艥㌱㘮⸱㨱慐湩楴杮眠瑩⁨祳瑮敨楴⁣湥浡汥瀠楡瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲琠楧敶愠癥湥猠慨敤吺潷漠⁲潭敲挠慯獴漠敮⁷潷歲Ƭ㄀⸱㜳债潲楶楤杮愠摮氠祡湩⁧敃慲業⁣汧穡摥映潬牯琠汩獥漠⁦楳敺㌠〰㍸〰洠琨楨正敮獳琠敢猠数楣楦摥戠⁹桴⁥慭畮慦瑣牵牥 景ㄠ瑳焠慵楬祴挠湯潦浲湩⁧潴䤠⁓›㔱㈶′景愠灰潲敶⁤慭敫椠潣潬牵⁳畳档愠⁳桗瑩ⱥ䤠潶祲‬片祥‬畆敭删摥䈠潲湷‬慬摩漠〲洠桴捩散敭瑮洠牯慴⁲㨱‴ㄨ䌠浥湥⁴›‴潃牡敳猠湡⥤‬潊湩楴杮眠瑩⁨牧祥挠浥湥⁴汳牵祲䀠㌠㌮欠⽧煳湩汣摵湩⁧潰湩楴杮琠敨樠楯瑮⁳楷桴眠楨整挠浥湥⁴湡⁤慭捴楨杮瀠杩敭瑮攠捴Ⱞ挠浯汰瑥汥
〱㈮⸵㨲瑉浥匠楨瑦摥琠畓⁢敨摡ㄠ‴獡椠整㐱㜮ਲ਼瑉浥匠楨瑦摥琠敨摡ㄠ‴獡椠整㐱㜮਴瑓敥潷歲眠汥敤⁤湩戠極瑬甠⁰敳瑣潩獮是慲敭⁤潷歲‬湩汣摵湩⁧畣瑴湩Ⱨ栠楯瑳湩Ⱨ映硩湩⁧湩瀠獯瑩潩湡⁤灡汰楹杮愠瀠楲業杮挠慯⁴景愠灰潲敶⁤瑳敥牰浩牥甠楳杮猠牴捵畴慲瑳敥瑥⹣愠⁳敲畱物摥䤮牧瑡湩獧‬牦浡獥‬畧牡⁤慢Ⱳ氠摡敤Ⱳ爠楡楬杮ⱳ戠慲正瑥ⱳ朠瑡獥愠摮猠浩汩牡眠牯獫欀⹧
㜱ㄮ⸰⸲㨳牐癯摩湩⁧湡⁤楦楸杮匠慴湩敬獳匠整汥䄠䤠䥓㌠㐰⠠㠱㠯 楫捴敨楳歮愠⁳数⁲卉ㄠ㤳㌸眠瑩⁨⹃⹉戠慲正瑥⁳湡⁤瑳楡汮獥⁳瑳敥汰杵㐠‰浭‬湩汣摵湩⁧慰湩楴杮漠⁦

ittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board470x420 mm bowl depth 178 mmeach†17.13.2:Providing and fixing white vitreous china water closet squatting pan ( Indian type):Orissa pattern W.C. pan of size 580x440 mm@
17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap²OD288910/2025-2026:Supplying and providing PVC Door with frame 50 x 40 x 2mm and shutter with shutter frame 60 mm wide and 25mm thick PVC hollow panels including all charges etc.1 sqm8
50.18.7.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.LitreŠ5.9.7:Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)Ê5.9.18:Centering and shuttering including strutting, etc. and removal of form for:Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like
50.6.6.1:Hollow block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete?
11.20.3:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement½
10.15.2:Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular /L-Type sections, made of 1.60 mm thick M.S. Sheet,joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with carbon steel galvanised dash fastener of required dia and size ( to be paid for separately)—10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)‹
11.39:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.á9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by weldingÙ
OD335638/2025-2026:[OD from DAR 11.36] - Providing and fixing I st quality stone finished ceramic wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours of any size as approved by Engineer -in-Charge, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
OD335684/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm metal, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.(
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)‡4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columnsÖ50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm24
50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall4
50.18.7.5.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall‰18.54.3:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 165 mm long, weighing not less than 110 gmsšOD336637/2025-2026:Supplying and fixing readymade RCC steinings (3 nos) of 0.90m diameter with pores for soakpit including RCC cover slab etc complete. rOD335501/2025-2026:Lettering in stainless steel for name Board work including labour, material and fitting chargessqcmÛOD288914/2025-2026:Providing and fixing Granite of any colour and shade for Name board of required size laid over base of cement mortar 1:4 including all charges etc complete at all levels including lettering and fixingach