Construction of Forest Guard Hut at Balota, Block Thural in Daroh Forest Range Under Forest Division Palampur During 2021-22

Amount

Excavation in Foundation / trenches etc. in earth work, lift upto 1.50 Meter stacking the excavated soil not more than 3 meter clear form the edge of the excavation, in pick work & Jumper work

Stone soling properly hand packed filling and consolidating with power road roller to the required grade and camber i/c spreading watering and rolling of binding material murum & earth etc. b) above 100 mm thick.

Providing and Laying of C:C 1:6:12 (1 Cement : 6 Sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering and shuttering in foundation and plinth

Providing form work of ordinary timber plan-king so as to give rough finish i/ccentering & shutering strutting and proppeng etc. height of propping and cement below supporting floor to celling not exceeding 4 mtrs. And removal of the same for in- situ reinforced. conc. & plain conc. work in:- Beams, cantilevers, lintels, RCC Sesmic band etc. not exceeding 1 mtrs. In depth. Beams at plinth level & roof level

Flat surface such as slabs, shelves&balconies etc.

Providing and laying cement concrete 1:2:4 (1 Cement : 2 Sand : 4 graded stone 20 mm nominal size including curing complete but excluding cost of for work and reinforcement concrete work in: Suspended Floor Roofs etc/Beams & Lintels

Providing mild steel / tor steel reinforcement for RCC work including bending, bending and placing in position complete up to floor two level: Beams lintel 110 KG/Cum Slab 90 KG/Cum

R.R.Stone mas. In cement mortar 1:6 in foundations and plinth of building walls etc. including dressing of stone.

2nd class Brick masonry in cement mortar 1:6 in super structure upto 3 mtrs. Height from plinth level i/c curing complete.

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position.

Providing and fixing of 40 mm thick panelled glazed or panelled glazed shutter for doors, windows and clerestorey window i/c black enameelled iron butt hinges with necessary screws fitting in second class deodar wood.

Preparation and fixing of 40 mm thick glazed shutter i/c glass (like wire gauge shutters) for windows and clerestorey windows i/c black enameelled iron butt hinges with necessary screws fitting in second class deodar wood.

P/F M.S. Plain grills of required pattren in wooden frame window etc. with M.S. flats/square or round bars with round headed bolts and nuts or by screws i/c red oxide priming coat (with material) a) M.S. flat/bar ,angle/squre iron & round M.S. Pipe etc. @ 25 Kg/cum

Fixing anodied sliding door bolt anodized transport or dyed to required colour and shade with bolts and nuts screws etc. complete 300x16mm or 250x16mm

Fxing tower bolt (barrel type) -do- D 300x10mm or w 250x10mm.

Fixing handles --do-- as per above item

Fixing hydraulic door closer all kind. Wire gauge D

Fixing of M.S. hooks and eyes.

20mm thick cement plaster in 1:5 (1cement: 5 sand in respective ratios) in fair/rough side of brick walls for plastering up to floor two level i/c arises, internal rounded angles, chamfers and / or rounded not exceeding 10mm in girth and finished even and smooth i/c scaffolding

White glazeld tiles 6mm thick in flooring,skriting treads of steps and landing laid on a bed of covering of 12mm (1/2'') thick cement mortar 1:3 finished with flush painting in white cement.

White glazeld tiles 6mm thick in skriting and risers of steps and dado on 12mm (1/2'') thick cement mortar 1:3 & joined with white cement slurry.

Making plinth protection 50mm thick in cement conc. In 1:3:6 (1 cement :3 sand : 6 20 mm ballast) i/c finishing the top surface of conc. Smooth.

Construction of open surface drain in H.D.C.R. Stone masonry 15x23cm U shape in cement mortar 1:6 and inside plastering 20cm thick with cement mortar 1:3 i/c earth work and laying 10 cm thick cement conc. 1:5:10 and 7.5cm thick cement plaster 1:3 and finished with floating coat of neat cement

Applying red oxide coat over new steel work and other metal surface after and i/c preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter scoured with wire brushing fine steel wool scribers & sand paper with ready mixed priming paint brushing red lead red oxide/zinc oxide chrome.

Painting two coats ( exculding primary coat) on new steel and other metal surface with ename/ready mixed/cooaltar paint brushing to give an even shade i/c cleaning the surface of all dirt,dust & other foreign matter.

Applying primer coat over new wood and wood based surface after and i/c preparing the surface by throughly oil grease,dirt and other foreign matter (ready mixed primer/enamel primer/wood filler transparent liquid for varnish).

Painting two coat (excluding priming coat ) on new wood and wood based surface with enamel/ready mixed flat oil paint brushing to give an even shade i/c cleaning the surface of all dirt dust and other foreign matter and sand papering

Wall painting two coat with oil bound interiar & exteriar weather proof snowcem of approved quality and shade on un-decorated wall surface to give an even shade i/c thoroughly brushing the surface free from all dier,dust foreign matters and sand papering i/c scaffolding Oil bound inner side

Snowcem outer side

P/Fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet in roofing with top coat of regular modified polyster (RNP) organic coating of 20 microns over

Steel work welled in built up section trusses and framed work for trusses purlins etc for roofing & frame of ceiling complete . @ 20 Kg/sqm (79.41 x 20 = 1588.24)

Provideng and fixing of .M.S.Sheet 1.66 to2 mm thick in eave board .

Making & fixing ridges or valleys of plain sheet 80/63 mm fix with G.I.J. or L Hooks 10mm dia. GI limpet & bitumen washers complete.

Providing and fixing on wall face C.I. Rain water pipes 100 mm dia

110 mm ida P.V.C plain bend

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops dust loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Providing and fixing particle board ceiling of approved quality with butt jointing and nail ( frame work and cover fillets to be paid for separately ) Cement bonded particle board

Prithvi Raj Government Contracter

KANTA DEVI GOVERNMENT CONTRACTOR

VIKAS RANA GOVT. CONTRACTOR