NIT NO. 25 ITEM NO. 10

Dismantling of old existing system (Pump set valve, delivery line, base frame and foundation) with the help of gas cutter / welding, pneumatic hammer and manual labor etc as per site requirement. Remove all electric connection safely.

Supply of Horizontal Split Casing centrifugal pump with Casing material: Cast Iron FG 260 ,Wear ring material: Bronze Impeller material: Bronze, Shaft material: S.S AISI 410 in fitted condition with suitable bearings along with IE2 rating TEFC motor. The pump and motor coupled on M.S base Plate with coupling and coupling guard , Base frame & Coupling: Included for following Duties:- Duties of Pump:- Head:-40 mtrs Discharge:-150 m3 /hr. RPM:-1500 Suction X Delivery size(in mm):- 150X100 Min. Efficiency:-80-86% Motor kW Recommended:-40 HP/30kW Make: - Kirloskar/Mather&Platt /DJB approved make. Motor Ratings:- Capacity :- 40HP/30kW Pole:-4 RPM:-1500 Make: - Crompton Greaves/ ABB/ DJB approved make.

Making of Reinforced Cement Concrete foundation suitable for above pump set with all material like cement concrete, sand, plastering i/c supply and grouting of new foundation bolt size as required at site - 08 nos. in pocket by proper welding to MS frame of RCC with proper support and filling of CC for grip of foundation bolt in CC structure and also making wet layer of cement in old CC Structure for Proper mixing and required civil work with proper leveling. Fixing of M.S Base frame on the foundation.

Supply of 150mm dia. 90 degree MS Bend made out from C class M.S pipe with double flanged; coated internally with food grade epoxy and externally/ outside with epoxy coating with required paint; complete in all respects.ISI Mark

Supply of CI Sluice valve, non-rising with SS Spindle, Flanged ends of follow size. 150 mm, PN-1.6 Make: - Kirloskar/ IVC/DJB approved.

Supply of CI Sluice valve, non-rising with SS Spindle, Flanged ends of follow size. 100 mm, PN-1.0 Make: - Kirloskar/ IVC/DJB approved.

Supply of CI NRV without bypass swing type Flanged ends of 100mm size, PN-1.0. Make: - Kirloskar/ IVC/DJB approved.

Supply of MS pipe heavy duty of 150mm dia. Heavy Duty (Thickness 6mm)

Supply of MS Flange of 80 mm dia. ISI Mark

Supply of MS Flange of 100 mm size dia. ISI Mark

Supply of MS Flange of 150 mm size dia. ISI Mark

Supply of Nut-Bolt and with washer of good quality. ISI Mark

Supply of Neoprene Rubber packing sheet. Make: - Jyoti/National/DJB approved.

Supply of PVC insulated, 3.5 cores 1.1 KV, copper conductor armoured cable of 50sq mm size. Make: - Grandly/Kalinga/Havells/DJB approved

Providing & Fixing of the Pressure Gauge for dia. 100/150mm & range from 0-100 Psi on delivery side including providing all the material /accessories such as GI fittings, Bib cock etc. required complete the work including as per site requirement. Make:-Hguru/fibeg/DJB approved make.

Supply of Three Pole with Neutral link, 800 Ampere, 415 Volt, Switch Disconnector fuse in SS Enclosure with DIN fuse link and handle and phase barriers. Make :- Seimens/ABB/DJB approved make

Supply of Manually Operated Oil Immersed Star-Delta Motor Starter (With Heavy Duty Contact) 40 HPMake:-Advance/Capital/Bentex/DJB approved make.

Supply of Motor Starter Oil For Oil Immersed Motor Starters. Make:- Savita/Savisol/DJB approved

Installation of above 02 Nos. 40 HP motor pump Set Along with all piping works, fixing of suction/Delivery lines, valves, gap pieces by electric welding set, manual labour ,alignment the pump/motor, fixing of M.S delivery line in the existing pumping main and also making electric connection of the pump sets etc, executing allied electrical, mechanical and civil works i/c watch and ward, cartage, taking all safety precautions, Arranging all tools and tackles i/c welding set, gas cutter etc. the works is inclusive of testing and commissioning of all (E&M) equipments at NO load and as full load successfully.

MITTAL TRADING COMPANY

Goodwill Enterprises

RRPN GROUP OF SOLUTIONS

Raj Engineering Co.

Sarvottam Sales and Services