Annual Plan-Panangad GP- Koorikkunnu DWSS-Installation of motor pump set-Project No S0308/26 ,Koorikkunnu DWSS-Installation of motor pump set -General Electrical Work

Electrification

OD481179/2025-2026:Supply,installation,testing and commissioning of Deccan make 20 HP 8 stage 3 phase vertical open well submersible pump set having a discharge of 24000 LPH at head of 152 mtrs ,27000 LPH at head of 140 mtr max.head 179 mtr. with suitable impeller,strainer on suction side etc. on three phase 415 V 50 Hz AC supply in existing open well including submersible cable joint connection to existing delivery line,including fixing 10 mtr long 10 mm dia SS pump lifting rope with suitable clamp made out of 60*10 mm MS flat iron etc.complete as required. or equivalent models of texmo, lubi , V gaurd , crompton,KSB ,CRI etc. pipe size 50 mm. )

OD481188/2025-2026:L&T make motor starters of following rating ,Fully automatic star/delta pump starter for three phase 20 HP submersible motor.ML2 FASD ,Relay range 20 - 32 A.

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

2.1.3:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N

OD481169/2025-2026:Supply, installation, testing and commissioning of 50 mm full way wheel valve (GM) - Zoloto

OD481170/2025-2026:Supply, installation, testing and commissioning of Non return valve of 50 mm dia. (GM) - Zoloto

OD481171/2025-2026:Supply and fixing suitable pressure gauge in the delivery side of the pump.

OD481173/2025-2026:Supplying and fixing TPN steel enclosure on surface/recess for 415V , C curve TPN MCB/Isolator

OD481176/2025-2026:Supply and fixing of 9W LED bulb on existing holder as required. Make -Wipro or equivalent.

OD481177/2025-2026:Supplying and fixing 100 A , 2 way neutral link mounted on DMC/SMC base with connections in existing meter board

OD481178/2025-2026:Supplying and fixing 100 A HRC fuse with HRC fuse link with connections in existing meter board

OD481180/2025-2026:Supply and providing red ,green, yellow , orange colours LED indicator , AC/DC ,22.5 mm cut out dia

OD481181/2025-2026:Supply and installation of dust and vermin proof,3 phase syntax meter board (GS-MB-6535) and to fix KSEB meters ,fuse units ,CT etc. as required including it on wall ,making good the damages colour washing etc. as required.

OD481182/2025-2026:Supply and providing 50 mm flange set

OD481183/2025-2026:Providing, laying and fixing 50 mm Dia GI pipe (Medium class) for supporting the delivery pipe on the top of the well, the pipe placing across the well and clamping each other required accessories etc.

OD481184/2025-2026:Supply and fixing flat iron clamps made of 40x6 mm flat iron clamp of 40 cm with suitable size bolt and nut for fixing delivery pipe on top of the well including painting as required.

OD481185/2025-2026:Supply and laying 10 mm or nearest size stainless steel rope.

OD481186/2025-2026:Supply and laying 12 mm or nearest size GARFIL/GARWARE nylon rope

OD481187/2025-2026:Supply, threading, laying and jointing of 50 mm dia 80 sedulous ASTM pipe approved make with specials as delivery pipe using required leak proofing materials etc. as required.

OD481189/2025-2026:Supply and fixing single phasing cum dry run preventer

OD481190/2025-2026:Supplying and fixing 50 mm bronze globe valve in the existing GI pipe line with accessories as reqd.

OD481192/2025-2026:Providing and fixing 2x25x3mm GI strip on surface or in recess for connections etc. as required

OD481193/2025-2026:Supply ,conveyance,installation,testing and commissioning of LED bulk head fittings with IP65 protection

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.24.21:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.6 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

90.6.4.2:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 2 Run

90.6.6.5:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.10 sq mm

1.14.10:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 10 sq. mm + 2 X 6 sq. mm earth wire

1.10.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.14.1:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

90.12.24.4:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

OD481327/2025-2026:Excavation of trenches for laying ASTM pipe/DWC pipe in soft soil and refilling with sand or good soil after laying of cable /pipe etc.

OD481486/2025-2026:Supply and fixing 50 mm 80 sedulous ASTM bend

2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

OD483407/2025-2026:Supply and providing 65 mm Non return valve (Gun metal) -Zoloto

OD481174/2025-2026:Supply and providing suitable iron hook grouted on wall for binding the service wire

OD481172/2025-2026:Charges for procurement ,preparation and submission of application for availing single/three phase KSEB service connection with necessary sketch ,test report etc.as required.

Please Enable Macros to View BoQ information