Annual Plan Pro No_230 Maintenance of Model School and Yard Tiling in Ward 18_Muvattupuzha Municipality -Maintenance Fund (Non-Road)_General Civil Work

Amount

BUILDING

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

OD64379/2023-2024:Taking out existing CC interlocking paver blocks from footpath /centeral verge including removal of rubbish etc,disposal of unserviceble material to the dumping ground for which payment shall be made separately and stacking of serviceable to the dumping ground for which payment shall be made separately and stacking of serviceable material within 5metre lead as per direction of engineer in charge

OD64287/2023-2024:Providing and laying of interlocking concrete block pavements using 60mm M30 departmental interlocking paver blocks made by strong vibratory compaction of approved size design and shape ,laid in required pattern over and including a compacted bed of 6mm stone aggregate of 50mm average thickness,etc all complete as per the direction of engineer in charge

OD64293/2023-2024:Providing and laying of interlocking concrete block pavements using 60mm M30 interlocking paver blocks made by strong vibratory compaction of approved size design and shape ,laid in required pattern over and including a compacted bed of 6mm stone aggregate of 50mm average thickness,etc all complete as per the direction of engineer in charge

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD97168/2023-2024:Engaging fitter

VHSC Maintenance

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.26.3:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes

OD66304/2023-2024:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.

OD66305/2023-2024:Providing and fixing precoated galvanised steel sheet roofing accessories 0.40mm (+0.05%)total coated thickness zink coating 120gms per sqm as per IS :MM (+0.05%) total coated thickness zink coating 120gms per sqm asw per I S 277 in 240mpasteel grade 5-7 microns exposy primer on both side of the sheet and polyster top coat 15-18 microns using self drilling self tapping screws complete

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

ABU M M

Bidder Name

Muhammed Ashik T N

ABU M M