Annual Plan- Malappuram District Panchayath Renovation of Kodumudi Kalkkadavu Community irrigation project at Irimbiliyam GP Electrification - 1254-24 - General Electrical Work

Amount

wiring

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7:Supply and providing copper earth bus in the panel board

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

2.2.14:Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.125 Amp, 36 KA

2.1.3:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N

2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

90.14.24.7:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.7.5 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor suitable for direct connection to motors.

OD146105/2023-2024:supply and fixing Digital Multifunction meter to read: V, A, F, PF-3 phase accuracy class 1 LED

OD146427/2023-2024:Supply and providing 200/5 A, 5 VA, accuracy class 0.5, Resin Cast Metering CT

OD146107/2023-2024:Supply and fixing Danger notice board of size, 125 x 75 mm

OD146108/2023-2024:supply and fixing Red, Green, blue, Yellow, Orange colours LED indicator, AC/DC, as required

OD146109/2023-2024:supply and providing CT operated, analogue type AC ammeter with 90° deflection scale, suitable dial, accuracy class 1 & of size 72 x 72 mm

OD146111/2023-2024:supply and providing 0 - 600 V analogue type AC volt meter with 90° deflection scale, accuracy class 1 & of size 72 x 72 mm

90.14.11.2:MCCB AccessoriesSupply and fixing one number earth fault Relay up to 125A to 200A with CBCT.

OD146434/2023-2024:Supply, Conveyanc, installation testing and commissioning of 30 HP Vertical open well submersible motor pump set 2880 rpm at rated voltage 3 phase 350/415V 50HZ AC supply at 34-96 Mts head of model Deccan 30DQ 4 30 100mm (4") S.D Deccan or 30 HP 4st CV-30/4 100D S.D VERTICAL OPEN-WELL SUBMERSIBLES ( 3 PHASE )/ CRI make or similler make delivery size using leak proof materials as GI pipe connected one by one to the motor up to the bottom of the well/river using leak proof materials as pipe connected one by one to the motor up to the bottom of the well using leak proof materials as required with necessary supports on both sides of the motor including giving connection as per the direction at siteoth sides of the motor including giving connection as per the direction at site

OD146456/2023-2024:Supply and fixing Motor starters of the following ratings Fully automatic star delta starter up to 40HP submersible motor and giving connections etc as requires L&T make

OD147027/2023-2024:Supply and providing cement concrete tube for placing the proposed 30HP motor pump set in required position of river and supporting the samae etc as required.

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

1.17.29:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 6 sq. mm

1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

1.17.33:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 6 sq. mm

90.6.6.6:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.16 sq mm

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD146114/2023-2024:2 X 25 mm X 3 mm G.I. strip test joint Supply, providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

OD146115/2023-2024:Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD146116/2023-2024:Supply and providing 25x6mm brass nut and bolt etc. as required

1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

OD146599/2023-2024:Supply and laying of 20mm or nearest size Nylon rope

OD146483/2023-2024:Supply and providing 100 mm or nearest size dia Full way valve (ISI)

OD146484/2023-2024:Supply and providing 100 mm dia or nearest size Flange set

OD146485/2023-2024:Supply and providing 100 mm or nearest size dia Gun Metal Non return valve (ISI)

OD146490/2023-2024:Supply and fixing flat iron clamps made from 2 nos. 50x6 mm flat iron clamp of 50 mm with suitable size bolt and nut for fixing delivery pipe on the top of the well as required

OD146578/2023-2024:Supply, threading ,laying and jointing of the 100 mm or nearest size "C' class GI pipe with all required accessories as delivery pipe with necessary clampps and supprt of existing motor pump set etc as required as dierection at site.

OD146579/2023-2024:Supply, threading ,laying and jointing of the 50 mm "B' class GI pipe with all required accessories as support and clamps of existing motor pump set

OD146123/2023-2024:Supply & installation of dust and vermin proof, 3 Phase Syntax Meter Board( GS-MB-6535-STD-NF] and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required.

OD146124/2023-2024:Supplying and fixing 100 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board

OD146541/2023-2024:Supplying and fixing 125A, HRC Fuse with HRC Fuse link with connections, in existing meter board

OD146126/2023-2024: Charges for preperation of KSEB test Report for submitting to the concerned KSEB section office

ANSARI KUNDIL

P. R. RIJESH

Bidder Name

ANSARI KUNDIL

P. R. RIJESH

ANOOP KUMAR P