IMPROVEMENT TO BLDG NO P-70 AT AF STN JODHPUR

Amount

M&L for demolitation of cement concrete of any description and in any position not otherwise specifically providedfor and complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar or bedding (but not backing ) removiing serviceable tiles to store and rubbish of the premises

M&L for coloured non skid ceramic tiles of size 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06Sqm but n.exc 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 20 mm screed bed in CM 1:6 for lying floor finishes.complete as specified and directed by Engr -in-charge.

M&L for coloured glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match. Over rendering 10mm thick in CM 1:4 complete all as specfied.

M&L for vitrified light coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match over 25mm thick pcc type B1 1:2:4 20mm graded aggregate with the colour of tiles complete all as specified and directed.

M&L for vitrified light coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25 mm thick over 15 mm thick screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for machine cut Kota stone slab 20-25 mm thick on skirting, riser,dado over 10 mm thick rendering in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L Taking down cement or cement lime plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and complete all as specified Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height including necessary scaffolding.

Material & labour 10mm thick rendering in CM 1:3 stone surfaces of ceiling etc, finished surfaced even & smooth with out using extra cement complete all as specified & directed.Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height including necessary scaffolding.

M&L for preparation of new plastered or unplastered surfaces of Ceilings and applying two coats of oil bound distemper over a coat of primer and over a layer of 3mm thick wall care putty, all as directed.

M& L for 10mm thick rendering on stone masonary in CM 1:4 on walls using integral water proofing compound @ 3% weight of cement , finished even and smooth without using extra cement and all as specified.(NOTE;- Water profing compound shall be measured and paid seperately)

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer and over a layer of 3mm thick wall care putty, all as directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primer and over a layer of 3mm thick wall care putty, all as directed.

Supply only integral water proofing compound ISI Marked

M&L for preparation of old painted wooden surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete.

M&L for preparation of new woodensurface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer and complete.

M&L for preparation of old painted steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete.

M&L for preparation of new steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and complete.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6

S&F in repairs vitreous- China wash down water closet Squatting pan ( pedestal Pattern) including flushing cistern and flush pipe complete all as specified and as directed.

S&F in repair vitreous china WHB white,flat back, size 450 x 300mm including brackets. vitreous china(flat black or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete as specified and directed by Engr -in-charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm.complete as specified and directed by Engr -in-charge.

S & F in repairs brass waste coupling of 32 mm dia for WHB all as specified and as directed

S & F PVC waste pipe 32mm bore and 1000/900 mm long for WHB all as specified and as directed

S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.

S&F CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified

S&F CP grating 100 mm dia all as specified and as directed.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) and all as specified and as directed.

S&F Single mirror bath room cabinet moulded body and frame (made of strong and fine quality A.B.S plastic) with hinged door make 'Alpina' (size 16"x12") white in colour or equivalante make Prayag or equivelent.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S & F in repairs sinks with drainage boards made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes,including bedding in cement mortar o to dwarf wall or including fixing cantilver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 25 mm.

S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 25 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F in repair stop/gate valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore.

S&F in repair Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm dia.

S&F in repair Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 25 mm dia.

S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repair 15mm Pillar taps cast copper alloy, capstan heads CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F Brass chromium plated shower rose 125mm size

Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as specified and directed by Engr -in-charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.complete as specified and directed by Engr -in-charge.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls.complete as specified and directed by Engr -in-charge.

S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal complete as specified and directed by Engr -in-charge.

S&F PVC (SWR) door bends 110 mm dia with acess doorcomplete as specified and directed by Engr -in-charge.

S&F PVC (SWR) Vent Cowl 110 mm dia complete as specified and directed by Engr -in-charge.

S&F 110 mm dia PVC WC connector with lip ring

S&F stack clamps out of 50mm by 5 mm flat iron & 16mm dia mild steel iron stay incl bolt & nuts & securing ends of stays to walls for 100mm pipe.complete as specified and directed by Engr -in-charge.

S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement

S&F salt glazed stoneware gully traps of size 180 x 150 mm, square or rounded mouthed, type `P' fixed in CM 1:6 and cover with RCC cover slab of size 200 X 200 X 50mm complete as specified and directed by Engr -in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site.Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm each but n.exc 4.5 sqm eachand removing from site.Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated.

M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats note: Glazed or clothetc in panelsor sash square shall be measured seperately

S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.

S& F for 18/19 mm thick prelaminated article board, interior grade, pelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised 40 mm flaps complete as specified and directed by Engr -in-charge.

S&F in Aluminium anodised barrel tower bolt of extruded section 200mm size complete as specified and directed by Engr -in-charge.

S&F in Butt hinges,heavy weight cold rolled mild steel of size 125mm.complete as specified and directed by Engr -in-charge.

S&F in extructed aluminium alloy handles, fabricated type,anodised of size 150mm.complete as specified and directed by Engr -in-charge.

S&F in repairsDrapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28 mm with plastic ring of ABS plastic of dia 56 to 58 mm all as directed by Engineer-in-Charge.

S&F in repairs decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod or as directed by Engineer-in-Charge.

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples

S&F in repairs floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor.

S&F in 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F in solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engineer-in-Charge.

S&F projecting type hinges of steel window/ventilator, 75/100 mm long including necessary fixing & welding work etc complete all as directed by Engr-in-charge.

S&F in repairs peg stay 250 mm/300 mm long stopping of steel window/ventilators including welding(if required) & fixing complete all as directed by Engr-in-charge.

S&F in repairs left/right MS handle of steel windows including welding(if required) & fixing complete all as directed by Engr-in-charge.

S&F in repairs MS 300 mm , ordinary rat tail rod pattern springs including rooler and roller plate complete all as specified.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified.

M&L for framed work such as grills, grating etc. with ends of bars shouldered and/or riveted, or forged into spikes ; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing framework of water tanks and similar work conforming to Fe290.Gde-E-165 and complete all as specified.

S&F plain white 18mm thick PVC sheet/board of required size in cupboards and in similar works includingbrackets/bolts for fixing. The panels shall be fabricated using adhesive and screws where required .All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed.

S&F in repairs for stailess steel kitchen plate rack size-31x30x10 inch and all as directed by Engr-in-charge

S&F in repairs sink mixer with regular spout w/m and all as directed by Engr-in-charge

Taking down old existing roof treatment (APP membrane & plaster ) and removing outside MOD and cleaning of roof slab / chajjas sweeping with brooms removing all loose materials debris etc complete all as specified and as directed by Engr-in-charge

M&L for 50 mm thick (average) cement concrete 1:3:6 type C-0 mix (12.5 mm graded stone aggregate) in padding over roof.complete as specified and directed by Engr -in-charge.

M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. NOTE : Water proofing compound shall be measured and paid for separately as “Supply only”

M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3 mm thick) with non-woven polyster reinforcement/mat with thermal insulation with white or balck or brown mineral gravel finish on upper side of membrane laid by torch application method with overlaps 100mm on length side and 100 mm on the width side as per manufacturer’s instructions over and including a coat of approved cold applied bituminous oil based primer (IS- 3384) @ 250 gm/sqm over cleaned roof surface complete all as specified and as directed by Engineer-in-Charge.

S&F UPVC Soil or waster pipe 110mm bore single socket in any length type 'B' with rubber ring joints laid in trenches of floor/ wall complete all as specified and directed

All as per serial item No 85 above but 75 mm bore completeall as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M&L for Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild TMT steel bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for pre cast cement concrete (1:2:4) Type B1 (using 20mm graded stone aggregates) as in covers slabs,set in cement mortar(1:4)with plain faces, complete all as specified and as directed. Note:-Reinforcement shall be measured and paid separately

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed blocks etc for embedding hold fasts complete all as specified and directed by Engineer-in-Charge

Taking down carefully copper/aluminum point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc,.

Taking down carefully Ceiling fan/Exhaust fan by disconnecting electrical connections, unsecrewing from position, stacking carfully at site for reuse of serviceable fans or dismantling blades and removing fan and blade to E/M Store yard all as directed and specified.

Taking down carefully light fitting any type by disconnecting all electrical connections and stacking at site for re-use of serviceable light or shifting to store for taking credit including making good to damaged surface of wall to match with existing specifications all as specified and directed. Note : Light fittings those are taken down along with point wiring and measued under item No.99 above shall not be measured and paid under this item.

Taking down carefully Electric geyser by disconnecting electrical connections & water connections unsecrewing from position, stacking carfully at site for reuse of serviceable geyser or removing geyser to E/M Store yard all as directed and specified.

Taking down carefully Enegry meters by disconnecting electrical connections, stacking carfully at site for reuse of serviceable meters or removing meters to E/M Store yard all as directed and specified.

M&L for channel or grooves cutting upto a depth of 2.5 cm and width not exc 15cm into brick/concrete/stone masonary walls, with or without re-inforcement and trimming surface as required, including concealing PVC conduit 20/25mm dia with required accessories (like junction boxes/bends etc) and plastering in 1:4CM, applying two coats of approved quality white putty for making good with smooth finish to match with the existing specification of wall surface all specified and directed by engr-in-charge. Note : Rate of PVC Conduit included in relavant point wiring and shall not be paid separately.

M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly, drawn in surface/concealed conduit Heavy duty (HMS Grade), GI terminal boxes not less than 1.0mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover or including modular plates of required size for mounting switch and sockets etc. complete all as specified and directed for following : - Note : Quoted rates deems to be included cost of modular plate or hylem board for mounting switches, sockets & regulators as required at site. Cutting into chases required for concealing heavy duty (HMS Grade) PVC conduits and making good to damaged surface shall be measured and paid separately under relavant item.

(a) One light / fan point controlled by one switch one way.

(b) One light point controlled by two Nos 5 Amps switch two way

(c) One 3 pin 5 Amp switch & socket outlet on same board with other switches.

(d) One 3 pin 5 Amp switch & socket outlet on Independant board.

(e) One bell point controlled by one switch 5 Amps bell push.

All same as per item ser No 98 here-in-above but wiring using 2.5 sqmm multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independant board.

S&F switch modular single pole one way 6 Amps 230 volt 1 module.

S&F switch modular single pole two way 6 Amps 230 volt 1 module.

S&F switch modular single pole one way 16 Amps 230 volt 1 module.

S&F Socket modular 6 Amp 2/3 pin combined two module.

S&F Socket modular 6&16 Amp 2/3 pin combined two module.

S&F Bell Push modular single pole one way 6 Amps 230 volt 1 module.

S&F electronic fan regulator modular stepped type 120 watt, two module.

S&F Ceiling rose surface bakelite 65x50mm three terminal.

S&F Lamp holder insulated PVC/Polycarbonate/bakelite body, fixed on PVC round or squre box using necessay screw & gutti complete all as specified.

S&F electronic Bell Bul-Bul music, 230 volt, single phase.

S&F(in repairs) modular white or Ivory cover plate with frame 1 module

S&F(in repairs) modular white or Ivory cover plate with frame 2 module

S&F(in repairs) modular white or Ivory cover plate with frame 3 module

S&F(in repairs) modular white or Ivory cover plate with frame 4 module

S&F(in repairs) modular white or Ivory cover plate with frame 6 module

S&F(in repairs) modular white or Ivory cover plate with frame 8 module

S&F(in repairs) modular white or Ivory cover plate with frame 12 module

Supply and fixing round/square shape 10 watt 220 volts AC, Surface mounting type, 170mm dia/side, with high efficiency PMMA diffuser soft glare free light(day cool/warm light) complete with drivers, holders, LED lamp suitable for wall/roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing LED light fitting wall /roof mounted, 1 x 20 watt including LED tube with driver complete suitable body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15%, lumen output should not be less than 90 lumens per watt, total input voltage range 140-280V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete

Supply and fixing LED light fitting wall /roof mounted, 1 x 9/10 watt including LED tube with driver complete suitable body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15%, lumen output should not be less than 90 lumens per watt, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 25 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed by Engr - in Charge complete all

S&F LED light fitting 9/10W bulkhead luminaires size 230x100mm including inbuild LED light driver perfect interior and exterier application connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete

S&F ceiling fan of 1400 mm sweep, induction motor type, heavy duty cast aluminium body, BEE approved ISI marked, single phase, AC supply, 240 Volt, including canopies, three number aluminium blades, down rod, double ball bearing with capacitor of 2.5 mfd and making connection with and including PVC insulated PVC sheathed copper conductor flexible cable from ceiling rose or connector to fan including marking of MES number complete all as specified and cat Part No TECHNIX PLUS of Make USHA or equivalent in approved makes. NOTE:The length of suspension rod shall be as per site requirement.

S&F Exhaust fan 300 mm sweep, 1400 RPM, copper wounded, heavy duty, four blade, metal body, ISI marked, air delivery shall not be less than 230 CFM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer complete

Supply and fix energy efficient (not less than 3 star rating) electrical geyser, 25 liters capacity white/half white, superior polymer/glasslin coating steel inner tank with minimum 8 bar pressure rating, with energy saving insitu PUF, with all in built safety accessories like thermostat/automatic thermal cut out with ON /OFF /CUT out indicators all pre-wired and advanced 3 level safety including accessories like thermostat, pressurer release valve/presure reducing valve, non return valve, connecting PVC heavy duty pipe with brass ferrule fitting for HOT and COLD water connections fixed as per manufacturers recommendation, making necessary connection & testing on completion complete all as directed. Note : Quoted rates deems to be inclusive cost of wall fasteners required for hoisting geysers. Any defect during warranty period shall be rectified by contractor from original manufacturer. All warranty card duly ink signed/stamped from distrubuter shall be handed over to MES on completion.

Fixing only Electric energy kWH meter Single phase/three phase 10 to 60 Amps, including making connection of incomming and outgoing wiring circuits using single core PVC insulated copper multistranded cable of size 6.0 sqmm and necessary lugs, including submission of kWH reading details of old unserviceable taken down meter and new installed meter to AGE E/M all as specifed and directed. Note : Serviceable meters taken down agaist item No 20 shall be re-used after necessary cleaning and servicing at AGE E/M store yard.

M&L for Sub main wiring with approved colour coding as per IS, single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, juction boxes etc) including taking down old unsv submain wiring complete all as specified for Two runs of 4.0 Sq.mm main cable alongwith one run of single core 4.0 Sq.mm for continuous earth wire in green color.

M&L for Sub main wiring with approved colour coding as per IS, single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, juction boxes etc) including taking down old unsv submain wiring complete all as specified for Two runs of 6.0 Sq.mm main cable alongwith one run of single core 6.0 Sq.mm for continuous earth wire in green color.

Supply and replace sheet metal enclosures with socket plug top, and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 20 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion complete including taking out old all as directed.

Supply and replace sheet metal enclosure distribution board for 240 volts, 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

M&L for MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

Supply and fixing MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

Material and labuor for earthing complete with Galvanized Steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level and filled with 15cm thick alternate layers of charcoal and salt, connected & including GI wire earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron protected by 15mm dia GI Pipe (light grade). Earth plate shall be surrounded by alternate layers of charcoal or coke and common salt in 15cm thick in layers & 15cm of widht all aurround of earth plate including 20mm dia GI light grade pipe for watering and including funnel, wire mesh, necessary earth work in any type of soil, Pre-cast RCC cover duly re inforced with 8mm dia TMT Bar @150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab, Earth Pit of PCC (1:3:6) type C2 (using 20mm graded crushed store aggrgate) complete all as specified and as shown in electrical plate No-3 of SSR Part-I including testing on completion. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.

VIKAS CONSTRUCTION CO.

Vivek Gaur

psj build solutions and company

Bansal Enterprises

M/S KAUTILYA GARG