CDP

Name of Work :: Construction of New Taluka Panchayat Office Building at Amreli, Ta. & Dist. : Amreli

Bill of Quantities (BOQ)

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[1] Excavation for foundation upto 1.5 m depth including sorting out 1111.70 Cum 157.16

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(B) Dense or Hard Soil

[2] Excavation for foundation for depth from 1.5 m to 3.0 m 292.00 Cum 287.21

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.

(C) Hard Murrum

[3] Excavation for foundation for depth from 1.5 m to 3.0 m 371.00 Cum 300.02

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.

(D) Soft rock not requiring Blasting

[4] Providing and laying cement concrete 1:2:4 (1 Cement : 2 corse 300.55 Cum 3805.29

sand : 4 granded stone aggregate 20mm nominal size) and

curing complete including cost of form work in (a) Foundation and

[5] Providing and laying cement concrete work 1:2:4 (M-15)(1- 72.25 Cum 4189.91

Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in (B) Slabs,

landing, shelves, Balconis , Lintels, Beams, Girders and Cantilever

upto floor two level.

[6] Applying general insecticide pest control treatment to floors, 610.00 Sqm 39.09

cupboards etc including labour material etc. complete.

Using Heptachloride 20 EC. As Per 6113_pests Consentration

Weight 0.50 percent is recommended one litre chemical

emulsion dillute with 39 liter of water will give. Total dillute

concrentration will be 40 litre inclusive of one litre chemical

emulsion appication 0.5 Litre chemical / Sqm of surface is

recommended as per I.S

[7] Filling available excavated earth (excluding Rock) in trenches, 562.60 Cum 136.92

plinth, sides of foundation etc. in layers not exceeding 20.cm. in

depth consolidating each deposited layer by ramming and

[8] Filling in plinth with sand under floors includingwatering 69.20 Cum 481.80

ramming, consolidating and dressing etc.complete.

[9] Filling in foundation and plinth with murrum or selected soil in 907.95 Cum 301.78

layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

[10] Brick work using common burnt Clay building bricks having 197.25 Cum 4214.33

crushing strength not less than 35 kg / sq.cm in foundation and

plinth in Cement mortar 1:6 (1 Cement : 6 fine sand) (A)

[11] Providing and laying controlled cement concrete M 250 282.90 Cum 4941.58

and curing complete including the cost of formwork but

excluding the cost of reinforcement for reinforced concrete

work in (A) Foundations, Footing base of columns.

[12] Providing and laying controlled cement concrete M 250 79.25 Cum 7133.40

and curing complete including the cost of formwork but

excluding the cost of reinforcement for reinforced concrete

work in (A) Column from Footing Top to Plinth Beam

[13] Providing and laying controlled cement concrete M-200 45.35 Cum 8583.78

and curing complete including the cost of formwork with

ordinary timber planking so as to give a rough finish incl.

centering shuttering strutting and propping etc.. but

excluding the cost of reinforcement of R.C.C. work in

Columns, Pillars posts and struts for Ground Floor Level.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[14] Providing and laying controlled cement concrete M-200 28.25 Cum 8625.38

and curing complete including the cost of formwork with

ordinary timber planking so as to give a rough finish incl.

centering shuttering strutting and propping etc.. but

excluding the cost of reinforcement of R.C.C. work in

Columns, Pillars posts and struts for First Floor Level.

[15] Providing and laying controlled cement concrete M-200 21.75 Cum 6370.85

and curing complete including the cost of formwork with

ordinary timber planking so as to give a rough finish incl.

centering shuttering strutting and propping etc.. but

excluding the cost of reinforcement of R.C.C. work in

Columns, Pillars posts, beams and struts for Second Floor Level.

[16] Providing and laying controlled cement concrete M-250 110.70 Cum 5932.30

and curing complete including the cost of formwork with

ordinary timber planking so as to give a rough finish incl.

centering shuttering strutting and propping etc..but

excluding the cost of reinforcement for reiforced concrete

work in Beams for Plinth Level Beam

[17] Providing and laying controlled cement concrete M-200 82.15 Cum 6287.66

and curing complete including the cost of formwork with

ordinary timber planking so as to give a rough finish incl.

centering shuttering strutting and propping etc..but

excluding the cost of reinforcement for reiforced concrete

work in Beams for Ground Floor Level Beam

[18] Providing and laying controlled cement concrete M-200 78.00 Cum 6329.26

and curing complete including the cost of formwork with

ordinary timber planking so as to give a rough finish incl.

centering shuttering strutting and propping etc..but

excluding the cost of reinforcement for reiforced concrete

work in Beams for First Floor Slab Level Beam.

[19] Providing and laying controlled cement concrete M.200 and 7.00 Cum 6439.70

curing complete with ordinary timber planking so as to give a

rough finish but excluding the cost of reinforcement for

reinforced concrete work in (C) R.C.C. LINTELS / Sill bends

incl. Finishing smooth with curring of formwork but excl. the

cost of reinforcement.for Ground Floor level.

[20] Providing and laying controlled cement concrete M.200 and 5.25 Cum 6481.29

curing complete with ordinary timber planking so as to give a

rough finish but excluding the cost of reinforcement for

reinforced concrete work in (C) R.C.C. LINTELS / Sill bends

incl. Finishing smooth with curring of formwork but excl. the cost

of reinforcement.for First Floor level.

[21] Providing and laying controlled cement concrete M.200 and 0.50 Cum 6522.88

curing complete with ordinary timber planking so as to give a

rough finish but excluding the cost of reinforcement for

reinforced concrete work in (C) R.C.C. LINTELS / Sill bends

incl. Finishing smooth with curring of formwork but excl. the

cost of reinforcement.for Second Floor level.

[22] Providing & laying controlled cement concrete M-200 and 4.00 Cum 6341.50

curing complete including the cost of formwork with ordinary

timber planking so as to give a rough finish incl. centering

shuttering strutting and propping etc.. But excluding

reinforcement for R.C.C. Chhajjas / shelves for Ground

[23] Providing & laying controlled cement concrete M-200 and 4.00 Cum 6383.10

curing complete including the cost of formwork with ordinary

timber planking so as to give a rough finish incl. centering

shuttering strutting and propping etc.. But excluding

reinforcement for R.C.C. Chhajjas / shelves for First Floor Level.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[24] Providing & laying controlled cement concrete M-200 and 0.50 Cum 6424.70

curing complete including the cost of formwork with ordinary

timber planking so as to give a rough finish incl. centering

shuttering strutting and propping etc.. But excluding

reinforcement for R.C.C. Chhajjas / shelves for Secornd

[25] Providing and laying controlled cement concrete M 200 3.75 Cum 7156.45

and curing complete including the cost of formwork but

excluding the cost of reinforcement for reinforced concrete

work in- Staircases For Ground Floor Level.

[26] Providing and laying controlled cement concrete M 200 3.75 Cum 7198.04

and curing complete including the cost of formwork but

excluding the cost of reinforcement for reinforced concrete

work in- Staircases For First Floor Level.

[27] Providing and laying controlled cement concrete M 200 91.15 Cum 6747.25

and curing complete including the cost of formwork but

excluding reinforcement for reinforced concrete work in-

Slabs For Ground Floor

[28] Providing and laying controlled cement concrete M 200 84.25 Cum 6788.85

and curing complete including the cost of formwork but

excluding reinforcement for reinforced concrete work in-

Slabs For First Floor

[29] Providing and laying controlled cement concrete M 200 5.00 Cum 6830.44

and curing complete including the cost of formwork but

excluding reinforcement for reinforced concrete work in-

Slabs For Second Floor Slab.

[30] Providing and laying cement concrete 1:3:6 (1- Cement: 3- 56.10 Cum 3112.53

Coarsesand :6- Graded brick bat aggregate 40mm normalsize )

and curing complete excluding cost of form work in Rodi

Concrete for terrace level.

[31] Providing cement VATA (10 cmx10 cm size)quartar round in 218.00 Mtr 24.28

cement mortar 1:1 including neat cement finishing watering

[32] Brick work using common burnt Clay building bricks having 207.40 Cum 4496.05

crushing strength not less than 35 kg / sq.cm in super structure

above plinth level up to floor two level in Cement mortar 1:6

(1 Cement : 6 fine sand) (A)conventional - Ground Floor.

[33] Brick work using common burnt Clay building bricks having 109.75 Cum 4538.48

crushing strength not less than 35 kg / sq.cm in super structure

above plinth level up to floor two level in Cement mortar 1:6

(1 Cement : 6 fine ) Conventional - First Floor.

[34] Brick work using common burnt Clay building bricks having 44.00 Cum 4580.91

crushing strength not less than 35 kg / sq.cm in super structure

above plinth level up to floor two level in Cement mortar 1:6

(1 Cement : 6 fine sand) (A)conventional - Second Floor.

[35] Half brick masonary in common burnt Clay building bricks having 237.25 Sqm 750.76

crushing strength not less than 35 kg / sq.cm in in C.M 1:3 (1

Cement : 3 coarse sand) in with 2 nos. of 6 mm dia.mild steel

round bars after every three coarse embedded in cement mortar

in super structure for Ground Floor. (A) Conventional

[36] Half brick masonary in common burnt Clay building bricks having 208.00 Sqm 757.07

crushing strength not less than 35 kg / sq.cm in in C.M 1:3 (1

Cement : 3 coarse sand) in with 2 nos. of 6 mm dia.mild steel

round bars after every three coarse embedded in cement mortar

in super structure for Ground Floor. (A) Conventional

[37] Providing TMT Bar FE 500D reinforcement for R.C.C. work 90843.00 Kg 77.29

including bending, binding and placing in position complete upto

floor two level. For Ground Floor.

[38] Providing TMT Bar FE 500D reinforcement for R.C.C. work 31209.25 Kg 78.34

including bending, binding and placing in position complete upto

floor two level. For First Floor.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[39] Providing and fixing 38mm thick SINGLE SHUTTER HINGED 94.50 Sqm 5539.37

flush door of BWP Grade confirming to IS-710 of approved

quality and design including applying of 1mm thick laminate

sheet of approved quality and design to both both side, all

edges shall be covered with 35x12mm first class teakwood

bedding incl. required steel finished brass hardware like hinges,

handles, mortice locks, door stop, stoppers and lock,etc. of

approved brands and including extruded aluminum colour

anodized "L" section main outer frame size 63.50mm x

38.00mm x 2.50mm (of jindal section 19552 @ Wt.1.1165 kg/mt)

filled with country wood and providing and applying minimum

coats of Melamine Polish and two coats of sealer etc. complete as

directed by Engineer- in-Charge.

[40] Providing and fixing 38mm thick DOUBLE SHUTTER HINGED flush 25.25 Sqm 5621.24

door of BWP Grade confirming to IS-710 of approved quality

and design including applying of 1mm thick laminate sheet

of approved quality and design to both both side, all edges

shall be covered with 35x12mm first class teakwood bedding

incl. Heavy duty Floor SPRING to both shutters and required steel

finished brass hardware like hinges, handles, mortice locks,

door stop, stoppers and lock,etc. of approved brands and

including extruded aluminum colour anodized "L" section

main outer frame size 63.50mm x 38.00mm x 2.50mm (of

jindal section 19552 @ Wt.1.1165 kg/mt) filled with country

wood and providing and applying minimum 3 coats of

Melamine Polish and two coats of sealer etc. complete as directed

by Engineer-in-Charge.

[41] Providing and fixing FRP frame size 100x50 mm and 28mm thick 33.00 Sqm 2377.76

FRP depress panel shutter having extra reinforcement on sides

& edges in Gel coat finish. The core of the shutter & frame is to

be filed up with injected fire retardant grade polyurethene

foam done in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole FRP frame &

shutter is to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of S.S

hinges with necessary screws & alluminium fixtures & fastenings &

fastener sleeve.

[42] Providing and fixing THREE track sliding window with Partly 89.75 Sqm 3141.88

Fixed and Partly Sliding Shutters as per drawing provided by

the chief architect : Using standard extruded color anodized

aluminum section equivalent to Jindal series C (20mm) section

numbers: frame bottom track 21651, frame top & sides

shutter top rail 20530, bottom rail 20529, side rails

interlock rails 20531. with 5mm thick transparent tinted float

glass, with rubber gasket, air lock strip and finishing joints with

transparent silicon sealant, with alluminium powder coated

fittings and fixtures.

[43] Providing and fixing TWO track sliding window with Partly fixed 139.55 Sqm 3337.20

and partly Sliding Shutters as per drawing provided by the chief

architect : using standard extruded color anodized aluminum

section equivalent to Jindal series C (20mm) section numbers:

frame bottom track 20695, frame top & sides 20987, shutter top

& bottom rails 20529, side handle 20530, interlock rails

20566. with 5mm thick transparent tinted float glass, with

rubber gasket, air lock strip and finishing joints with

transparent silicon sealant, with alluminium powder coated

fittings and fixtures.

[44] Providing and fixing colour anodised Alluminium sectional 5.75 Sqm 2835.69

ventilators using section 63.50 x 38.10 { Wt 1.50 mm th.} for

mm thick Tinted Glass as per drawing, including fixture and

fastenings and hold fasting with coach bolts etc complete.

{Colour as directed by Engineer in charge

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[45] Providing and fixing in position collapsible steel shutters with 25.25 Sqm 6116.59

vertical channels 20 x 10 x 2mm braced with vertical channels

20 x 5mm size with top and bottom rails of T- iron40 x 40 x

6mm with 38mm dia steel pulleps complete with be ist nuts,

locking arrangement, stoppers handles including applying a

priming coat of red lead paint.

[46] Providing and fixing M.S. Grills for Window Ventilators etc 5887.00 Kg 113.82

openings , made of of 16 mm size Square Bright Bars, framed in

M.S.Flat 75x6 mm size at 10cm. c/c in Horizontal intervals,

welding bright bars in frame incl. cutting, transportion, primer

& oil painting, fixing in position etc. complete.

[47] Providing and fixing AISI 304 Grade stainless steel knock 40.50 Sqm 3190.02

down railing system comprising 50mm dia Railing Pipe fixed on

32 X 32 mm X 16G SS Balustrade of 850mm height placed at

maximum 600mm C/C distance along with Two SS horizontal

mambers of 16mm dia ( 16G) connected at the side of balustor

with SS brackets. The balustrade shall be mounted on floor

with base plate using specially designed anchor fasteners and

concealed by AISI 304 Grade SS base cover cap (Wall thickness of

pipes shall be taken as 1.50mm along with all visible

component developed in high grade SS and wherever required,

joints to be filled with bushings for extra strength).

[48] Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 650.00 Sqm 1074.11

24'' in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.

[49] Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' 41.05 Sqm 1144.45

in skrting risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3-coarse sand) and jointed with white cement

[50] Providing and laying MATT finished GVT Vitrified tiles 8 to 10 324.20 Sqm 1551.52

mm thick , 24'' x 24'' in flooring treads of steps and landing in

two colour pattern laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand

) finishing with flush pointing in white cement.

[51] Providing and laying MATT finished GVT Vitrified tiles 8 to 10 19.00 Sqm 1605.64

mm thick , 24'' x 24'' in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

[52] Providing and Fixing Sandwich type standing plateform in 8.00 Sqm 5372.55

kitchen using 18mm thick Black GRANITE in top and sides and and

25 to 30 mm thick one side polished Kota Stone in base

including 0.60 mt. wide vertical support of both side polished

Kota Stone and one horizontal shelf 60 cm wide below

plateform as required and including 50mm wide facia patti

in front incl. moulding the exposed edges in half round with

all material, tools and labour etc. complete as directed by

Engineer-In-Charge.

[53] Providing and laying Both side polished Granite Stone 18 3.00 Sqm 2320.28

mm.thick ( all edge machine cut and rounding mirror

polished) of approved shade and colour for CB Shelf / Urinal

Partition purpose including making groove in the wall, moulding

the open edges full round and jointed with grey cement slurry

including rubbing and polishing etc. complete. as required

and directed by Engineer- in-Charge.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[54] Providing and laying 18mm thick Black Granite Stone ( all 248.05 Sqm 3253.31

edge machine cut and rounding mirror polished) of approved

shade in Cills & Jambs incl. applying coarse-cum- fine sand on

the back side of the granite with approved adhesive like Araldite

or eq. to make the surface rough for better bonding with the

wall surface on 10 mm. thick Cement Mortar 1:3 (1-cement,

3-coarse sand) laid and jointed with white cement slurry

including rubbing and polishing complete. use single piece or

two pieces incl. overlapping in up-down position granite stone

for jambs & soffits as required and directed by Engineer- in-

[55] Providing and laying polished Telephone Black Granite Stone 18 98.75 Sqm 2766.44

mm.thick flooring in single piece in treads of steps and riser over

20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) and jointed with white cement

slurry with matching pigments including rubbing and polishing

and moulding the exposed edges half round etc. complete.

[56] Providing and laying coloured glazed tiles of the size 300 mm x 463.35 Sqm 1488.24

600 mm x 8 mm in skirting and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry.

[57] Providing and laying Mat Finished Ceramic tiles of size 116.00 Sqm 1393.93

600mm x 600mm x 10mm in flooring treads of steps and

landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with 3mm groove filled

with approved quailty epoxy grout of approved shade as directed

by Engineer-in-charge.

[58] Providing and laying broken china mosaic flooring for 686.70 Sqm 779.70

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

[59] Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 799.00 Sqm 706.93

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved

design Confirming to IS 15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint with sand in proper line and

level as per guidlines of IRC

: SP 63-2018 etc. Complete.

[60] Providing 15 mm thick mala finished cement plaster in 1321.75 Sqm 246.05

single coat on fair side Brick/Concrete walls for interior

plastering upto floor two level finished even and smooth

and finishishing with floating coat of neat cement slurry.(1)

Cement Mortar 1:3 (1 Cement : 3 sand) For GROUND Floor.

[61] Providing 15 mm thick mala finished cement plaster in 981.25 Sqm 274.80

single coat on fair side Brick/Concrete walls for interior

plastering upto floor two level finished even and smooth

and finishishing with floating coat of neat cement slurry.(1)

Cement Mortar 1:3 (1 Cement : 3 sand) for FIRST Floor.

[62] Providing 15 mm thick mala finished cement plaster in 43.75 Sqm 303.56

single coat on fair side Brick/Concrete walls for interior

plastering upto floor two level finished even and smooth

and finishishing with floating coat of neat cement slurry.(1)

Cement Mortar 1:3 (1 Cement : 3 sand) for SECOND Floor.

[63] Providing 10 mm thick mala finished cement plaster in 724.00 Sqm 222.33

single coat on fair side Brick/Concrete walls for interior

plastering on ceiling and soffits of stair upto floor two level

finished even and smooth and finishishing with floating

coat of neat cement slurry.(1) Cement Mortar 1:3 (1

Cement : 3 sand) For GROUND Floor.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[64] Providing 10 mm thick mala finished cement plaster in 697.50 Sqm 272.97

single coat on fair side Brick/Concrete walls for interior

plastering on ceiling and soffits of stair upto floor two level

finished even and smooth and finishishing with floating

coat of neat cement slurry.(1) Cement Mortar 1:3 (1

Cement : 3 sand) upto floor three level i.e. for FIRST Floor.

[65] Providing 10 mm thick mala finished cement plaster in 42.25 Sqm 323.61

single coat on fair side Brick/Concrete walls for interior

plastering on ceiling and soffits of stair upto floor two level

finished even and smooth and finishishing with floating

coat of neat cement slurry.(1) Cement Mortar 1:3 (1

Cement : 3 sand) upto floor three level i.e. for FIRST Floor.

[66] 20 mm thick Double Coat sand faced Gutka cement plaster on 3072.00 Sqm 342.41

wall upto height 10 mts.above ground level consisting of 12 mm

thick backing coat of C.M 1:3 (1 cement : 3 sand )and 8 mm thick

finishing coat of C.M 1 : 1(1 cement : 1 Sand) etc. complete.

[67] Applying two coats of putty and two coats of primer of approved 3721.00 Sqm 40.59

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matterand sand papered

[68] Wall painting (Three coats) with plastic emulsion paint ( Asian 3721.00 Sqm 125.40

paint Royale or equivalent ) of approved brands and

manufacture on undecorated wall surfaces to give an even shade

including thorougnly brushinf the surface free from mortar

droppings and other foreign matter and sand papered smooth

including Applying two coats of Birla or Asian acrylic lappy (purty)

and two coats of primer of approved brand and manufacture on

new wall surface to give an even shade.

[69] Finishing wall with Weather Proof Acrylic Emulsion Water 3114.00 Sqm 120.26

Repelant Paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface to

rempve all dirt, and remains of loose powdered materials etc

[70] Providing laying and jointing in true line and level 110 mm dia. 497.00 Mtr 876.90

U.P.V.C. SWR Type B pipe conforming to IS 13592-1992 with one

end plain and other end socketed with rubbering & fitting

conforming to ISI 14735- 1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant.Pipe shall be fixed on the wall using of PVC

clamp of the size 110 mm dia X 149 mm length X 145 mm

high at every 2000 mm center to center or shall be concealed in

wall as directed including necessary fittings such as bends,

shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement, including cost of all materials.

[71] Providing laying and jointing in true line and level 160 mm dia. 278.00 Mtr 834.38

U.P.V.C. SWR Type B pipe conforming to IS 13592-1992 with one

end plain and other end socketed with rubbering & fitting

conforming to ISI 14735- 1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant.Pipe shall be fixed on the wall using of PVC

clamp of the size 160 mm dia X 210 mm length X 196 mm

high at every 2000 mm center to center or shall be concealed in

wall as directed including necessary fittings such as bends,

shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement, including cost of all materials.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[72] Providing laying and jointing in true line and level 50mm dia. 107.20 Mtr 195.67

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

[73] Providing laying and jointing in true line and level 40mm dia. 86.00 Mtr 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

[74] Providing laying and jointing in true line and level 25mm dia. 162.00 Mtr 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

[75] Providing laying and jointing in true line and level 15mm dia. 84.80 Mtr 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

[76] Providing and fixing concealed center point to wall ceiling & 17.00 Mtr 170.36

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete.[A] 15 mm.

[77] Providing and fixing concealed center point to wall ceiling & 31.00 Mtr 253.82

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete. [C] 25 mm.

[78] Providing and Fixing 50mm dia PVC Heavy Duty valve of approved 5.00 No 1097.62

quality with required fitting and adhesive incl. fixing the same

with new or existing line as directed by EIC.

[79] Providing and Fixing 40mm dia PVC Heavy Duty valve of approved 12.00 No 975.66

quality with required fitting and adhesive incl. fixing the same

with new or existing line as directed by EIC.

[80] Providing and Fixing 25mm dia PVC Heavy Duty valve of approved 20.00 No 708.52

quality with required fitting and adhesive incl. fixing the same

with new or existing line as directed by EIC.

[81] Providing and Fixing 15mm dia PVC Heavy Duty valve of approved 9.00 No 633.02

quality with required fitting and adhesive incl. fixing the same

with new or existing line as directed by EIC.

[82] Providing and fixing C.P. brass shower rose with 15mm or 20mm 8.00 No 282.16

inlet.(A) 100mm dia. Each

[83] Providing and fixing 600mm x 450mm bevelled edge 13.00 No 835.70

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with C.P.

brass screws and washers

[84] Providing and fixing screw down bib taps of following size.(B) 34.00 No 214.81

Brass chromium plated screws down Bib Tap. (ii) 20mm dia.

[85] Providing and fixing Urinal of approved quality including 13.00 No 1560.15

connection with trap and with integral longitudinal flush

pipe.(A) Squating plate pattern white earthenware 550mm x

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[86] Providing and fixing Water closet squatting pan ( Englow Indian 4.00 No 2478.63

type W/C pan ) size 580mm. including earthwork, footrest,

mm dia. "P" or "S" trap, inletconnection for flush pipe and

chromium plated brass half turn flushing valve 25mm.dia. W.C.

Pan Vitrious China Long Pattern.

[87] Providing and fixing wash down water closet (European type, W.C. 16.00 No 4341.91

Pan )with integral 'P' or 'S' trap including jointing the trap with

soil pipe in cement mortar 1:1 (1 cement : 1fine sand)

including providing and fixing wash down water closet with C.P.

Brass hinges and rubber buffers including Providing and

fixing Jet Sprey , Seat Cover, 15mm dia angel Valveof approved

quality etc. complete.

[88] Providing and fixing wash basin with single hole for pillar tap with 18.00 No 2208.68

C.I. Or M.S. brackets painted white including cutting holes and

making good the same but excluding fittings

:(ii) Flat back wash basin 500mm x 400mm size including 15mm

dia Pillar Tap, Waste pipe, M.I Fisher Union, 15mm dia stop cock

[89] Providing and fixing Brass polished Bright Soap Dish Holder 9.00 No 1103.43

of approved pattern, quality and design incl. all labour, tools,

machineries etc. complete as directed by Engineer-in-Charge.

[90] Providing and fixing C.P. brass towel rail comlete with C.P. 10.00 No 604.51

brass brackets fixed to wooden plugs with C.P. brass scews.(B)

600mm x 20mm size.

[91] Providing and fixing 600mm x 120mm glass shelf with C.P. brass 9.00 No 517.00

bracket and guard rail complete mixed to wooden plug with

C.P. brass screws.

[92] Providing and fixing Brass polished Bright Hanger / Khinti of 9.00 No 592.37

approved pattern and design incl. all labour, tools, machineries

etc. complete as directed by Engineer-in-

[93] Providing and fixing Kitchen SS Sink Glosy ASIS 304 Grade 1mm 1.00 No 2353.34

thick with overall size 610 X 460 mm & Bowl size 560X410X200

with C.I. or M.S. Brackets, painted white including cutting holes

in walls and making good the same etc. complete.

[94] Providing and Fixing Stainless Steel(Grade- 316) accessories, 2.00 No 2946.15

Sheet Cutlery Basket of size:520X485X100 mm .fixing on

telescopic channel of length 500mm having hardware like

handles, dead lock etc. for Kitchen of Approved Brand as

directed by Engineer in charge.

[95] Providing and Fixing Stainless Steel (Grade- 316)accessories, 4.00 No 3050.68

Thali Basket & Cup Saucer Basket of size:520X485X150 mm

.fixing on telescopic channel of length 500mm having hardware

like handles, dead lock etc. for Kitchen of Approved Brand as

directed by Engineer in charge.

[96] Providing and Fixing Stainless Steel(Grade- 316) accessories, 2.00 No 2771.92

Plain Basket of size:520X485X150 mm .fixing on telescopic

channel of length 500mm having hardware like handles, dead

lock etc. for Kitchen of Approved Brand as directed by Engineer

[97] Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 25.00 No 585.80

100 mm diameter with jali of the following nominal diameter of

self cleansing design with C.I. Scread down or hinged grating

including the cost of cutting and making good the wall.

[98] Providing and fixing S.W Gully trap with C.I grating brick 6.00 No 1246.92

masonary chamber and water tight C.I.cover with frame of

mm x 300 mm size (inside) with standard weight. (i)Square

mouth traps.(B) 150 mm x 100 mm

size -P or R type.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[99] Constructing brick masonry road gully chamber 1100mm x 4.00 No 8767.25

500mm x 775mm including 500mm x 450mm C.I. horizontal

grating with frame and vertical grating

[100] Constructing brick masonary chamber for underground C. I. 4.00 No 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35kg./sq. cm. In C. M. 1:5 C.I. Cover with

frame (lightn duty) 455 x 610 mm internal dimensions. Total

wt. of cover with frame to be not less than 38kg. (weight of cover

23 kg. & wt. of frame 15kg.) R. C.C. top slab with 1:2:4 (1

cement :2 coarse sand :4 graded stone agg. 20 mm. nominal

size) foundation concrete 1:5:10. Inside plaster 15 mm thick

with C. M. 1:3 finished smooth with a floating coat of neat

cement on wall & bed concrete etc. comp. (i) inside dimensions

455 x 610 mm. x 450 mm. deep for single pipe line.

[101] Providing sock pit of 5.0Cu.M. volume including excavating 2.00 No 3457.27

sand filling brick bats with dry masonry work at top for 45cm

height including covering the top with stone including providing

vatas in C.M. 1:3 with finishing curing etc. complete as directed.

[102] Providing and Constructing Septik Tank of 7.20 x 3.46 x 2.50 ( 1.00 No 148693.48

outer diemnsions) and 6.74 x 3.00 x 2.5 ( inner dimensions )

including necessary excavation, 15cm thick B.B.C.C. in bottom of

the tank, providing 23cm thick brick masonary outer wall in

C:M 1:6, 2 Nos of partition wall of half brick masonary in

C:M 1:5, RCC Slab in 1:2:4 with reinforcement as directed,

15mm cement plaster on inside surface of brickmasonary,

Verticle cement vata on each corner of the wall,110mm dia. PVC

pipe in bottom etc.complete incl. all labour, material

, excavation etc. complete as per detail drawing and

instruction given by Engineer- in-Charge.

[103] Providing erecting and fixing tripple coated PVC water tank of 19000.00 Liter 10.22

required capacity each including necessary transportation to

the site, making plateform with matching flooring to the

terrace, fixing fitting and connecting to inlet and outlet

with all necessary fittings & connection complete on terrace.

[104] Providing and fixing ball cock of approved quality as 3.00 No 189.84

directed.(A) Vitreous china (ii) Copper metal- 50 mm.

[105] Providing and Fixing 18 mm thick Plywood SHUTTER for Cupboard 5.00 Sqm 7032.54

or Below platform shutter using 18mm thick plywood covered

with 1.00 mm thick laminates both side. Exposed face should

be covered with 1.0 mm thick laminate of approved quality

and pattern, colour, texture the rest of the inside surfaces, shelves

etc. shall be finished with 0.80 mm thick white laminates of

approved make, wooden framing shall be used including

alround framing of 19 mm X 12 mm teak wood member at all

borders and in the centre where ever, all the sides of the

shutter should be covered with teakwood battens and

provided with necessary framing, best quality SS channels for

sliding, SS finished hinges, hadles, megnet, deadlock etc.

as approved and directed by Engineer-In-Charge.

[106] Providing and Constructing JUNCTION CHAMBER of size 0.35 x 34.00 No 3113.41

0.35 x 0.60 m. including connecting rainwater pipes, Half brick

work with 15mm thick plaster in C;M 1:4, 50mm thick C.C. 1:2:4 in

bed flooring & covered with Precast RCC slab cover 100mm thick

incl. all labour, material , excavation etc. complete.

[107] Providing & Constructing FILTER CHAMBER of size 2.06 x 1.21 x 8.00 No 11936.27

1.20 m. including connecting rainwater pipes, half brick work with

15mm thick plaster in C;M 1:4, 50mm thick C.C. 1:2:4 in bed

flooring & covered with Precast RCC slab cover 100mm thick incl.

all labour, material , excavation etc. complete.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[108] Providing & Constructing PERCOLATION SOCKWELL of 2.54 m 4.00 No 53911.09

internal clear diameter and 5.00 mt. depth incl. honey comb brick

masonary in C:M 1:C, 15mm thick plaster in C;M 1:4, 50mm thick

C.C. 1:2:4 in bed flooring & covered with RCC top slab 100mm

thick incl. filling with greval etc. complete incl. all labour, material

excavation etc. complete.

[109] Steel work welded in build up sections,framed work 27.00 Qtl. 9108.48

including cutting, hoisting fixing in position and applying a priming

coat of red lead paint A) In beams and joists, channels,

angles,tees, flats with connection plates or angle cleats as in

main and cross beams, hip and trussed purlins connected

to common rafters and the like.

[110] Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall 85.00 Sqm 1441.90

roofing sheet fixed with hilti screw and rubber silicon sealer and

alluminium strip of size 50 x 3 mm etc complete as directed

by Engineer in charge.

[111] Applying priming coat over new steel and other metal surface 85.00 Sqm 36.74

after over and including preparing the surface by thoroughly

cleaning oil, grease dirt and other foreign matter and scoured

with brushes fine steel wool, scrapers and sand paper with

ready mixed priming paint brushing red lead.

[112] Painting two coats (excluding priming coat) on new steel 85.00 Sqm 92.20

and other metal surfaces with enamel paint brushing, interior

to give enamel paint brushing, interior to give an even shade

including cleaning the surface of all dirt, dust and other foreign

[113] Providing and laying cement concrete 1:3:6 (1- Cement : 9.00 Cum 4152.60

3- Coarse sand : 6- crushed stone aggregates 20 mm

nominal size) and curing complete including cost of formwork in

(A) Wall Caps / Coping.

[114] Providing and fixing M.S. grills of required pattern to wooden 454.00 Kg 153.20

frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed

bolts and nuts or by screws.

(B) ORNAMENTAL GRILL

[115] Providing and fixing 1.20 Metre high fencing with 2.0 Metre long 248.00 Mtr 391.93

M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats

fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals

of galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with G.I,staples including fixing

the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10

[116] Box cutting the road surface to proper slope and camber for 589.90 Cum 109.41

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed upto all

[117] Providing, laying, spreading and compacting stone 292.70 Cum 1021.11

aggregates of specific sizes to WBM Grade-I specification using

63mm to 45mm metal (@ 0.91cum per 10 sqmt loose qty) with

stone screening of 11.2mm (@ 0.18cum per 10 sqmt loose qty)

and stone dust (@ 0.06cum per 10 sqmt loose qty) as filler

material, including spreading in uniform thickness, with

consolidation by vibratory roller in stages to proper grade and

camberm applying and brooming requisite type of screening

/ binding materials to fill up the interstices of coarse aggregate,

watering and compacting to the required density as per MoRTH.

(By Mechanical Means). as directed by the Engineer in Charge.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[118] Providing and cast in situ ordinary cement concret M-250 for 184.80 Cum 6407.44

average 20 cm thick wearing coat / C.C. pavement laid as

directed in approved fixed side form work of steel channel

including vibrating by screed-needle vibrator and finishing

by plate vibrator and finished in continous operation

including providing of contraction joint at every 4.00mtr

and expansion joint at interval of 40 mtr applying

debonding strips,bitumen primer,bituminous sealant,12 mm

rope and curing etc. complete.

[119] Providing and fixing pre-cast concrete kerb stone of gray cement 91.00 Mtr 402.55

based concrete block 30cm length,30cm height and 15cm thick of

M250 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint

with C:M 1:3 (1cement:3fine sand) etc complete.

[120] Providing and fixing in position FE 500D TMT bar 2.77 M.T. 73243.02

reinforement including cutting, bending and tying complete as

per detailed drawings. (A) R.C.C. Kerb. (B) R.C.C. Footpath.(C)

R.C.C. Approch slab.(D) Wearing Coat.

[121] Supplying and fixing reinforced concrete heavy duty non- 36.00 Mtr 659.99

pressure pipes with collars for culverts carrying heavy traffic as per

IS 458-1991 specifications including setting the pipes in C.M.

1:2 watering and laying (to level or slopes) of class NP3

of following internal daimeters.(i) 300mm dia.

[122] Drilling of 200 / 215 mm dia bore in over burden rocky or loose 40.00 Mtr 418.14

collapsible / boulder strata and lowering of UPVC / PVC / ERW

casing pipe above 12 mt and upto 40 mt depth by DTH rig etc

[123] Drilling of 200 mm dia bore hole by DTH rig in rocky formation in 200.00 Mtr 489.85

All takuka of Zone III ( o to 350 Mtr )

[124] Supply of "U" PVC Casing pipe CM type (B) 200 mm dia 200.00 Mtr 1155.44

[125] Providing and fixing bail plug {Bottom Cap } Suitable for 200mm 1.00 LS 830.27

[126] Heavy duty clamp made from 4" x 1.5" iron strip suitable for 1.00 No 242.40

column pipe 1.5" to 2" length. (C) 65mm(2.1/2") dia. Pipe

[127] Supplying & erecting G.l. bend for pipe connections suitable for 1.00 No 236.34

[128] Supplying, & erecting C.I. swing, check type non-return (Reflux) 1.00 No 1757.40

Valve -ISI marked suitable for following size (B) 65 mm dia.

[129] Supplying submersible pump set Electric motor driven borewell 1.00 No 45732.80

submersible pump set confirming to IS 8034 and motor

confirming to IS 9283 working at 3 phase 400 / 440 volt 50 Hz AC

supply & 2900 RPM. (25) Cat o. 6.3, Discharge 400 LPM, 150 Mtr

[130] Auto transformer starter suitable for local & remote pump control 1.00 No 24518.76

application consisting of Auto Transformer (vacuum impregnated,

air cooled having three (3) tappings at 50%, 65% and 80%),

incomer MCCB / MPCB, overload relay and contactors as per Type

II including digital MFM with RS 485 communication port,

analogue type ammeter with selectorcoordination switch, run

hour meter, required protective relays & control accessories.

[131] Providing and erecting ISI marked PVC insulated flat 560.00 Mtr 195.94

submersible cable as per detailed technical specifications of R/C of

GWSSB conforming to IS 694, IEC 60227 / 60228.(e) 1 R x3 Core x

[132] Providing & fixing of ISI marked HDPE Pipes suitable for potable 160.00 Mtr 154.38

water as per IS specifications no 4984/1995 including SS-316

nipple at both ends having 11 TPI threads as per specifications,

press fitted and bolted incl all taxes, transportation, freight

charges, inspection charges, loading, unloading along with

lowering and laying the pipe including the cost of all labour &

material for 63mm dia ( PN-10) 10.00 kg/cm2 pipe.

[133] Geohydrological ground water investigation including vehicle 1.00 No 14428.86

charges (b) For three phase DTH bore / DR tube well including

water sample testing charges.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[134] Providing & erecting Monobloc pump 3 phase 400/440 volt, 50 Hz 1.00 No 16483.20

AC Supply & 2800 RPM as per IS 9079 at departmental stores

with following MOC: Casing: CI-FG260, Impeller: Bronze & Shaft:

SS:410 @ 24 Mtr head, 285 LPM Discharge, 5-HP

[135] Supplying & erecting approved make DOL / Star Delta starter 2.00 No 8466.83

suitable for local & remote pump control application consisting of

MPCB, overload relay and contactors as per Type II coordination

including digital voltmeter, analogue ammeter with selector

switch, run hour meter, required protective relays & control (C)

[136] Providing and laying controlled cement concrete M-250 and 9.65 Cum 6161.40

curing complete incl. the cost of formwork but excluding

reinforcement for reinforced concrete work in Walls from top

of foundation level For Ground Floor.

[137] Providing and laying Ceramic tiles 6mm thick in flooring treads of 13.00 Sqm 992.15

steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3- coarse sand ) finishing with flush pointing in

white cement. .

[138] Providing and fixing FRP Frame size 125X65mm and 35mm thick 2.60 Sqm 2615.04

FRP shutter with wodden grain raized pannel design finish

shutter having extra reinforcement on side and edges and in

polish finish. The core of the shutter is to be filled up with

injected fire extinguishing grade polyurethane foam

done in situ alongwith embedded wooden pieces for

stiffening and also for taking hines and fixstures. Thje whole

FRP Frame and shutter is to be water proof, termite proof and

resistance to mile acid/ Alkali. Rates are to be inclusive S.S. hinges

with necessary screws and alluminium fixture and fastening.

[139] Distempering (Two coats) with oil bound distemper of 74.00 Sqm 75.68

approved brand and manufacture and of required shade on wall

surface to give an even shade over and including a priming coat

with distemper primer of approved brand and

manufacture after thoroughly brushing the surface free from

mortar dropping and other foreign matter and also including

preparing the surface even and papered smooth

[140] Providing and fixing C.I. Manhole cover 0.60mm x 0.45mm size 2.00 No 958.17

having weight not less than 35Kg.

[141] Providing and fixing cast iron steps of size 500mm x 150mm x 8.00 No 151.50

22.5mm and painting with two coats of Anti-corrosive paint etc.

[142] Providing and fixing screw down bib taps of following size : 3.00 No 186.82

(B) Brass chromium plated screw down bib tap

[143] Providing and Fixing brass chromium plated bright finished 15mm 1.00 No 696.90

dia. Push Cock specialy designed for urinal of approved quality

directed by EIC.

[144] Providing and fixing S.W. gully trap with C.I. grating brick 1.00 No 1292.19

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps. (A) 100mm x 100mm size P type.

[145] Painting Two coat (excluding priming coat) on previously painted 5.00 Sqm 100.25

steel and other metal surfaces with enamel paint brushing to

give an even shade including cleaning the surface of all

dirt, dust and other foreign matter.

[146] Clearing and grubbing road land includinguprooting rank 0.26 Hec. 27924.38

vegetation grass bushes, shrubs, sapling and trees girth upto

300 mm removal of stumps of trees cut earlier and disposal

of unservicable materials (C.) By meachanical means in area

of light jungle

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[147] Rolling & watering of earthwork in layers with vibratory roller 716.00 Cum 22.96

including filling in depressions which occurs during the process

[148] EXECUTIVE TABLE 2000mm x 850mm x 3.00 Set 22038.64

750mm with side unit 1200mm 400mm x 750mm : Providing

and supplying Main Table made with 19mm thk. plywood

structure as per architect drawing finished with 1.0mm thk.

decorative laminate on outside portion & 0.8mm thk. liner

Laminate inside as specified & approved by architect fixed with

necessary fixtures and fastening (Hardware) as per architect

drawing. Provide Plastic Computer Desk Table Grommet Cable

Wire Outlet Hole Cover 60mm, Key-board trey, S.S legs,

Drawers with telescopic roller channels , Handle and Locking

arrangements with all necessary fixtures and fastening . Provide

shutters as per drawing fixe with handle , Hinges , magnet

complete with bidding patties and all required hardware . provide

footrest as per drawing. all exposed shall be covered with required

Teak wood beading patti finished with appproved melamine

polishing work. complete as per architect drawing and as per

instruction of architect & engineer in charge.

[149] OFFICE TABLE of required size : Providing and supplying 52.47 Sqm 13104.79

Table made with 19mm thk. plywood structure as per architect

drawing finished with 1.0mm thk. decorative laminate on outside

portion & 0.8mm thk. liner Laminate inside as specified &

approved by architect fixed with necessary fixtures and fastening

(Hardware) as per architect drawing. Provide Plastic Computer

Desk Table Grommet Cable Wire Outlet Hole Cover 60mm, Key-

board trey, Soft-board, S.S legs, Drawers with telescopic roller

channels , Handle and Locking arrangements with all necessary

fixtures and fastening . Provide shutters as per drawing fixe with

handle , Hinges , magnet , complete with bidding patties and all

required hardware . provide footrest as per drawing. all exposed

edges shall be covered with required Teak wood beading patti

finished with appproved melamine polishing work. complete as

per architect drawing and as per instruction of architect &

engineer in charge.

[150] Conference Table, Table Size: As required 20.70 Sqm 12988.07

: Providing and supplying Conference table made with using

19mm TH Plywood . structure finshed with 1.0mm TH

decorativelaminate sheet approved by architect & nylon

adjustors fixed with necessary fixtures and fastening (Hardware)

as per architect drawing.Top portion of conference table all

edges shall be covered with required Teak wood beadig patti or

Molded Laminate sheet finished with approved melamine

polishing work. The table shall also provision for carrying wires &

mounting electrical plug point, switches & milk etc. Complete as

per architect drawings and as per instruction of architect &

engineer in charge.

[151] Work Station / Operator Table of required Size : Providing 4.00 Sqm 17373.95

and supplying Reception table made with using 19mm thk.

plywood structure finished with 1.0 mm thk. decorative

laminate sheet approved by architect fixed with necessary fixtures

and fastening (Hardware) . Top portion of table alledges shall be

covered with required teak wood beading patti finished with

approved melamine polishing work. Complete as per architect

drawings and as per instruction of architect & engineer in charge.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[152] STORAGE UNIT / CUPBOARD : Providing and Fixing Full / Low 36.00 Sqm 11161.51

Height Storage Unit as per drawing to be made from 19mm thick

Plywood structure and finished with 1.0 mm thick Decorative

Laminate Sheet on outside and 0.80mm thick liner laminate inside

as specified and approved by architect fixed with necessary

fixtures and fastenign as per architect drawing. The shutter shall

be fixed with required handle, hinges, magnet and locks complete

with bidding patties and all required hardware. Ply shelves

removable type supported on side tak wood battens on both side.

all exposed edges shall be covered with 8mm thick teak wood

beading patti finished with melamine polish. etc. complete as per

architect's drawing as per instruction of architect & engineer in

[153] Supplying and fixing 8mm thick Acrylic sheet ( Cast Quality ) for 3.00 No 5096.87

Incumbency Chart incl polishing the edge and finishing the

sheet with approved shde radium font and of directed design and

pattern and fixing the same with required S.S. sturd as directed by

[154] Notice Board: Size: 120cm Wide x 168cm High and 2.00 No 5676.20

Overall Display Height:203cm. Specification: Portable Loop

Fabric Panel Floor Display Stand.

(a) Panel Dimensions: 120cm wide x 168cm High. (b) Overall

Display Height:203cm (c) Panel Display frame finishes: light gray

or beige. (d) Loop

fabriccolors available:.

[155] HIGH BACK revolving & tilting EXECUTIVE CHAIR : 3.00 No 7272.00

Providing and Supplying High back Chair for conference with M.S

frame work. Upholstered with Artificial leather/Leatherette and

molded PU foam, together with molded seat & back covers. The

back foam should be designed with contoured lumber support fo

extra comfort. Caster of high durability & hydraulic. The chair

should have cylinder with 5 years" warranty. The size of chair

53cm x 79cm (back side) and 51cm x 49cm (seat size). The PU form

should be molded with density=45+ 2 kg/m3. with One piece

armrests are scratch and weather resistant. The permanent

contact mechanism is designed with 360⁰ revolving tyep, 12⁰ seat

tilt 19⁰ back tilt, Front pivot for tilt with feet resting on groind

ensuring more comfort, Tilt tension adjustment, 5 position locking

with anti-shock back mechanism, Which should prevent the

backrest from impacting the user when the lock is released, static

seat depth adjustment=0.5 cm 5 position locking.

[156] MEDIUM BACK revolving & tilting CHAIR : Providing and 13.00 No 6363.00

supplying Medium back chair for conference with M.S frame wrk.

Upholstered with changeable fabric upholstery covers(as per

requirement) and molded PU form, togrether with molded seat

& back covers. The back form should be designed with contoured

lumber support for extra comfort. Caster of high durability &

hydraulic. The chair should have cylinder with 5 yearsʼ warranty.

The size of chair

47.5cm x 58cm (back side) and 49cm x 48cm (seat size). The PU

form should be molded with density =45 ± 2 kg/m3. With One

piece armrests are scratch and weather resistant. The

permanent contact mechanisms is designed with 360⁰ revolving

type, with pneumatic height adjustment & 17⁰ maximum tilt only

& tilt tension adjustment facility.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[157] LOW BACK revolving & tilting CHAIR :. Providing and 44.00 No 4545.00

supplying Low back chair for work center & other staff the seat &

back are made of M.S frame work. Upholstered with changeable

fabric upholstery covers (as per requirement) and molded PU

form, together with molded seat & back covers. The back foam

should be designed with contoured lumber support for extra

comfort. Caster of high durability & hydraulic. The chair should

have cylinder with 5 years warranty. The size of chair 45cm x 45cm

( back side) and 45cm x 43cm (seat side). The PU form should be

molded with density =45 ± 2 kg/m3. with One piece armrests. The

armrests are scratch and weather resistant. The permanent

contact mechanisms is designed with 360⁰ revolving type, with

pneumatic height adjustment & 17⁰

maximum tilt only & tilt tension

[158] VISITOR CHAIR : Providing and supplying Visitor or Guest chair 63.00 No 4090.50

the seat & back are made 12mm thick hot pressed plywood

upholstered with changeable fabric upholstery covers (as per

requirement) and molded PU foam, together with molded seat

& back covers. The back foam should be designed with contoured

lumber support for extra comfort. The size of chair 45cm x 38cm

(back side) and 45cm x 43cm (seat side). The PU foam should be

with powder coted MS structure as per architect selection. The

seat and back fixed with MS structure with required necessary

[159] THREE SEATED SOFA : Providing and supplying sofa. (3 seated) 8.00 No 18180.00

made with using 19mm thk. plywood structure frame with

S.S legs required necessary support fixed with necessary fixtures

and fastening (Hardware) . it shall be covered with 32 density PU

foam) with required Thickness as per design in seat & back and

handle portion this should be again covered with 14mm thick PU

foam with Madarpat cover on it & upholstered fabric or leather of

suggested & approved by architect finished with seat, back & all

visible side as per architect drawing. Complete as per architect

drawing and as per instruction of architect & engineer in charge.

[160] TWO SEATED SOFA : Providing and supplying sofa. (2 seated) 8.00 No 12726.00

made with using 19mm thk. plywood structure frame with

S.S legs required necessary support fixed with necessary fixtures

and fastening (Hardware) . it shall be covered with 32 density PU

foam with required Thickness as per design in seat & back and

handle portion this should be again covered with 14mm thick PU

foam with Madarpat cover on it & upholstered fabric or leather of

suggested & approved by architect finished with seat, back & all

visible side as per architect drawing. Complete as per architect

drawing and as per instruction of architect & engineer in charge.

[161] Centre Table/ Corner Table/Tipoi. : Providing and supplying 5.00 No 3363.30

Center Table/Corner Table/Tipoi with Glass top made with 19mm

thk. plywood finished with 1.0 mm thk. Decorative laminate sheet

specified and approved by architect & fixed with necessary

fixtures and fastening (Hardware) inclusive of approved

melamine polishing work. Top part of center table covered with

8mm thk. toughened Glass with polished Edges. Complete as per

architect drawing and as per instruction of architect & engineer in

[162] Roller blinds : Providing & supplying Roller Blinds assemblies 119.50 Sqm 2090.70

are to be supplied & installed in all windows with great precision

it should be water resistant and fitted on aluminum head rails duly

powder coated and fitted with stainless steel drive rods. Manual

operated and should have ISI mark. Complete or as directed as per

architec & engineer in

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[163] Providing Stainless Steel Dust Bin in cylindrical shape with steel 3.00 No 1090.80

pedal and lid Garbage bin for washroom , kitchen, bathroom and

office of size 7 " x 11' - 05 Litre as directed by Engineer-in-Charge.

[164] Providing and Arranging Three Seater Gang Seater having seat and 2.00 No 9090.00

back made from CRCA Tubular frame welded with perforated

Diemoulded CRCA sheet. base frame made from round Tubular

welded with horizontal beam Two side armrest welded with frame

including finishing metal parts with epoxy polyster powder

coaating of 50 micron thickness Including all materials and labour

etc. Complete as per drawing and instruction ofengineer- incharge

& overall weight of unit shall not be less than 35 kg. 3 Seater

S.S.Gang Seater: size-1590mm x 480mm x 880mm (H)

[165] Providing and fixing decorative wall Murral type nation emblem ( 3 1.00 No 67023.03

lions design with "સcયમેવ જયતે" ) made out of first class

teakwood incl . carving the emblem on wood using advance CNC

cutting auto machine nad applying 2 nos of 19mm thick marine ply

to backside and approved qaulity rope -light to give lighting effect

to back side of the arved emblem and applying the carved mblem

with melamine polish and fixing the same on wall as directed by

Engineer-in-charge. Size 670mm x 1170mm x 79mm

[166] Podium Size: 580x 380 x 1100 mm : Providing and supplying 1.00 No 11761.45

Podium made with using 19mm thk plywood structure finished

with 1.0mm thk decorative laminate sheet apporoved by

architect fixed with necessary fixtures and fastening (Hardware) .

all edges shall be covered with required teak wood beading patti

finished with approved melamine polishing work. the podium

shall also provision for carrying wires & mounting electrical plug

point, switches & mike etc. Complete as per architect drawings

and as per instruction of architect & engineer in charge.

[167] Providing, supplying & fixing SS letters of specified size, pattern, 800.00 CM 109.08

matter, language, font, style etc. made from 16 Guage thick

grade stainless steel with 8% Nickel including fixing the letters to

any surface at any height, making good the surface etc. complete

as directed and as per detail

[168] Key Stand: Size: 60 x 70 cm. Features: 1.00 No 5454.00

(a) Convenient way for storing keys with door lock. (b) Door cover

with locking method for security purpose with glass ( as per

instruction of architect & engineer in charge).

[169] Pin Up Board Size : 600 x 300 mm : Providing and fixing pin 1.00 No 1090.80

up board of required size as per instruction of architect & engineer

[170] Supply Installing Testing & Commissioning of 7.50 HP Monobloc 1.00 No 46308.50

pump 3 phase 400/440 volt, 454 LPM Discharge, 24 meter

head, 50 Hz AC Supply & 2800 RPM as per IS 9079 at

departmental stores with following MOC: Casing: CI-FG260,

Impeller: Bronze & Shaft: SS:410 including all requirede fittings,

rubber ring, flange, nuts, bolts and labour etc complete as directed

and certified by Engineer in charge.

[171] Supply Installing Testing & Commissioning of 100 NB M.S. Pipe 43.00 Mtr 2148.78

Class B, ISI Marked, Make : Asian, Tata, Jindal, Supply

Fabrication ( Including civil work like making hole, soil

remove etc.) Installation, painting, Fitting ( i.e Elbows, Tee,

Reducer Coupling Flanges, Nipple etc.) with proper supports

including structural and civil costructed, Nut, Bolt and

washer, Gasket, Fabricated piping with fitting must be Tested

for any leakage and Hydraulically tested at 15kg/sqcm and it

must be satisfied and certified by Engineer in charge.

[172] Supply Installing Testing & Commissioning of 100mm Dia 2.00 No 5226.75

Double Flanged ISI-Mark C.I Sluice / Butterfly Valve with gun

metal / SS working part,stainless steel spindal, Gasket, Nut Bolts,

etc. necessary complete.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[173] Supply Installing Testing & Commissioning of 100mm Dia 1.00 No 11673.08

Double Flanged ISI-Mark C.I Non-Return Valve with Gasket, Nut-

Bolts, etc necessary

[174] Supply Installing Testing Commissioning of 100mm dia "Y" Type 1.00 No 15157.58

Stainer ISI-Mark with Gasket,Nut Bolts, etc .necessary complete.

[175] Supply Installing Testing & Commissioning of 25mm Dia ISI-Mark 2.00 No 1858.40

C.I Ball Valve with gun metal / SS working part,stainless steel

spindal, Gasket, Nut Bolts, etc. necessary complete.

[176] 25mm Dia Air Valve for Riseing Main Line. For Air Release 1.00 No 2555.30

Including supply, Installing, Testing And Commissioning etc.

[177] Supply Installing Testing & Commissioning of Pressure 1.00 No 1916.48

Guage 100mm Dia. 1 % Accuracy Direct Bottom 3/8” BSP

connection In Brass Socket & Range 0 to 16 Kg/Cm2 etc

[178] Supply Installing Testing & Commissioning of 63mm Dia C. I. 1.00 No 6969.00

TWO WAY FIRE BRIDGE Inlet Valve with Gun-Metal Non-

Return, Flange, Gasket, Nut-Bolts, etc. Complete.

[179] Providing and fixing FIRST AID HOSE REEL wall mounting fix type 4.00 No 9408.15

having side of the hose reel made of MS , providing with

30mtr long 25mm dia PVC nylon braided flexible hose with S.S

shut off nozzle of approved quality etc complete as directed.

[180] Supplying and Fixing 4.5 Kg Fire Extinguisher, CO2 12.00 No 8362.80

Gas as per IS 15222 / ISI 15683 for fire classes BC &

Electrical Fire, Discharge Control mechanism fitted with high

pressure steel braided Discharge Hose and Flat Horn with

diffuser Nozzles for dispersed discharge of CO2, internal

coating not applicable & external coating of enamel spray

painting, Cylinders construction: hot spinning seamless & bearing

ISI mark, confirm to IS 7285 and PESO/CCOE Nagpur

approved. Fire Class 21B rating as per IS 15683 and ISI Mark.

[181] Supplying and Fixing Fire Extinguisher as per IS : 15683 with ISI 12.00 No 7549.75

Marked, Type : ABC, Capacity : 06 kg, Fire Rating : 4A, Stored

Pressure Type, Filled with 50% Mono Ammonium Phosphate

based multi purpose Dry Powder suitable for Class A, B & C

Fire, Pressurized by Dry Nitrogen, Complete with all

respect with stand/wall mounting bracket

[182] Supplying and Fixing Modular Wall Mounted ( with brackets ) 2.00 No 12544.20

portable Clean Agent HFC- 236fa 5 Kg gas based Fire

Extinguisher which leaves no residure making it safe for use

on sensitive equipment Extinguisher performance tested by

NABL accredited Lab, MSDS of the Extinguishing agent is a must

current and valid BIS certification 15683 2006, EN approved ISI

and GE approved / Marked. LPCB approved, EN:ISO:9001 & ISO

10002:2004 certified with 3 years warranty ) ( in / near

Electrical Panel Area )

[183] Providing of FIRE BUCKET WITH STAND which icludes a set of 4.00 No 10453.50

4 nos buckets with Capacity 09Ltr and a stand , G.I.24 Gauge,

Painted Red & Marked “FIRE” as directed.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[184] Supplying, Installing, Testing and commissioning of 1.00 No 335255.36

micro processor based intelligent addressable main

Zone FIRE ALARM CONTROL PANEL central processing unit at all

the Two floor with high intensity Hooter and manual call point

with hammer with the following loop modules and capable of

supporting minimum 120 detectors per loop and length up to

km. Alarm panel contains Zone wise Fire Fault LED indication,

Zone isolation facility, mains on system On, Charge on Visual

indications. Auto Dialer attached facility, External switch

for reset, silence, Lamptest, External Switch to test each zone

fire, open - short status manually, inbuilt Buzzer, inbuilt

battery charger & battery spaces. Operates on 230v AC,

HZ AC supply Fire alarm panel with resettable 02 nos of

manual call point for use in case of emergency for activate

the fire alarm system connected with 2 nos sounders and

70 nos of smoke detectors with base to address

[185] On/Off switch with pipe & 3c x 1 sq mm cable wiring ISI mark. 1.00 No 3850.23

[186] Providing & Fixing of Retroreflective High intensity grade on 6.00 No 1638.46

Acrylic plate of size 450mm 150mm made of 3 mm thick Acrylic

name plate with lettering using High intensity grade retro

reflctive letters, incl. fixing on each chamber as directed &

Instructed by Engineer- in- Charge.

[187] Supplying and Fixing of MARKING STRIPS are broadly used on the 1200.00 Sq.Cm. 6.97

roads, parking lots and many more places by manufacturer /

dealer to help/provide the right directions to the people in

making fast and immediate movement from the hazardous

places. Marking strips for stairs & walls : 120 x 5.7 cm size.

These strips are designed with the help of premium quality basic

material. It should have water proof, Tear resistance,

precisely designed, made of : Photo luminescent rig-id plastic,

2 mm thickness, printed on high quality gloss paint with UV

resistance, Material used : Non-Radioactive, non- phosphorous,

non-toxic and lead free, Time after removing the light source:

60 minutes, Luminescent intensity : 30 med/sqm,

Luminescent intensity greater than

mcd/sqm, period of light decay : 3100 minutes

[188] Supply, laying, testing & commissioning 1.1 kV grade, XLPE 90.00 Mtr 145.44

insulated, stranded Aluminium conductor, galvanised steel flat

strip / round wire armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with necessary clamps

/ in existing cable trench / cable trays / conduit / pipe

sleeves at road crossing or floor as per site requirement)

conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of

following sizes: (g) 3 Core x

[189] Supplying & Installation PRESSURE GUAGE of 150 mm dia. 0-21 1.00 No 2903.75

Kg/cm2 fitted with 12/15 mm dia pad cock valve and G.I.

complete as required.

[190] Providing and erecting IPVC insulated flat submersible cable 90.00 Mtr 124.23

as per detailed technical specifications of R/C of GWSSB

conforming to IS 694, IEC 60227 / 60228. (C) 3 Core x 4 Sq.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[191] Supplying & erecting approved make motor CONTROL 1.00 Job 13557.23

CUBICAL PANEL DOL / Star Delta starter suitable for local &

remote pump control application consisting of MPCB,

overload relay and contactors as per Type II coordination

including digital voltmeter, analogue ammeter with selector

switch, run hour meter, required protective relays & control

accessories. [C] D.O.L. up to 7.50 HP including Providing dust and

vermin proof MS cabin having two compartments, one for

panel board and other for energy meter and fuse unit with

required locking arrangement , minimum degree of protection IP

52 as per IS 2147 fabricated from CRCA sheer steel minimum

thickness for base frame / channel / gland plates for 3 mm for

load bearing members,1.6 mm for ineternal members of size

[192] Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 218.00 Pts. 485.81

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete

Cat III Light Point

[193] Bell Point 8.00 Pts. 485.81

[194] Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 76.00 Pts. 674.68

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Cat III

[195] Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 18.00 Pts. 510.05

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.[I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb

db board (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

[196] Point wiring for on board Looped Plug with 6A Modular type 61.00 Pts. 257.55

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories Cat. III

[197] Providing following type of Modular Type Accessories mounted 10.00 Nos. 160.59

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

by Engineer In charge(3) Two Pin/RJ-11 Telephone Socket [A] For

One Gang Cat III

[198] (7) Blank Plate Single Cat III 100.00 Nos. 25.25

[199] (8) Computer RJ-45 socket Cat III 38.00 Nos. 160.59

[200] (9) 16 Amp. SP one way switch . Cat.III 17.00 Nos. 180.79

[201] (10) 6/16Amp. Universal socket Cat III 17.00 Nos. 199.98

[202] (19) Modular Indicating Call Bell 8.00 Nos. 329.26

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[203] Providing and erecting ISI mark Medium class RIGID PVC PIPES of 1495.00 Mtr 33.33

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in approved manner

as directed (b) 25 mm

[204] Providing & erecting PVC Corrugated Flexible Conduit with 100.00 Mtr 21.21

required nos. of coupling, PVC bushes, Check-nuts etc. complete of

following sizes. (2) 25 mm

[205] Supplying and laying UPVC cable trunking system comprising 50.00 Mtrs 188.87

unplasticised polyvinyl, chloride rigid material with ignition free

and flame proof confirming BS with necessary end caps Internal

and external bend, flat bends, coupler, tee etc..All necessary

accessories and measuring of following sizes (3) 50 mm x 50 mm

[206] Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated 1575.00 Mtrs 82.82

ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessorie (b) 2 wire 2.5 sq. mm

[207] Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated 200.00 Mtrs 260.58

ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (A) with medium class Rigid PVC

pipe and accessoriese (h) 4 wire 6 sq. mm

[208] Providing & erecting Switch board for Computer or electric 41.00 Nos. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories

[209] providing and erecting Mains with ISI marked, 1.5KV grade 9.00 Mtr 12.12

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.(a) One wire

[210] (e) One wire 6.00 sq. mm 56.00 Mtr 56.56

[211] (g) One wire 16.00 sq. mm 40.00 Mtr 142.41

[212] (i) One wire 35.00 sq. mm 16.00 Mtr 300.98

[213] Supplying and erecting Flexible PVC insulated multi strand multi 142.00 Mtr 46.46

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

[214] Supplying & erecting approved make Telephone Cable electrolytic 250.00 Mtr 20.20

copper conductor PE insulation twisted in two pairs, & wrapped

with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming to C-DOT

erected in existing pipe. of following size of conductors & nos.of

pairs. With necessary connections.[A] Conductor Size 0.5 mm (a)

Unarmoured(2) Two Pairs

[215] (5) Ten Pairs 220.00 Mtr 65.65

[216] Supplying & erecting approved make LAN cable of following size in 1025.00 Mtr 47.47

existing pipe as per direction[C] CAT -

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[217] Providing & erecting main Distribution (MDF) indoor type, back 4.00 Ea. 994.85

mounted frame as per DoT standard approved with krone strips

(a) Suitable for 10 pair

[218] Supplying and erecting LED indoor fittings with LEDs of wattage 131.00 Ea. 535.30

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder coated and high U.V.

& corrosion resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with integral driver (v)

36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll

[219] Supplying and erecting led lamps with following wattage capacity 18.00 Ea. 112.11

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts Cat III

[220] Supplying and erecting LED indoor fittings with LEDs of wattage 6.00 Ea. 427.23

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

85 %( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (ii) 11-15 watts, Surge-2 KV

[221] Supplying and erecting LED indoor fittings with LEDs of wattage 39.00 Ea. 1794.77

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %(

fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(B) LED Panel Light with provision for

Plane front frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat III

[222] (F) Spot Light 425 Lumens, Surge-2KV (i) 3 to 7 Watts Cat III 2.00 Ea. 813.05

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[223] Supplying and erecting LED street light / Flood light fittings with 15.00 Ea. 4997.48

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)(A)

Street Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection.(ii) above

to 60 watts Cat III

[224] Supplying and erecting LED street light / Flood light fittings with 11.00 Ea. 7266.95

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)(B)

Flood Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection.(iv) above

90 to 120 watts Cat III

[225] Supplying and erecting LED street light / Flood light fittings with 4.00 Ea. 4092.52

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) (C)

Post Top Lantern LED fitting comprises of finish cast aluminum

spigot and spun aluminum canopy fixed with opal polycarbonate,

pipe arrangement for vertical mounting driver and accessories

wired upto terminal block.IP 65 (i)20- 30W Cat III

[226] Supplying KITKAT pattern porcelain cut-out fuse with base of 3.00 Ea. 420.16

following current capacity erected on existing block board(vi)

[227] Providing and erecting Approved make Four pole moulded case 3.00 Ea. 6173.12

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.ICS=100% of ICU only

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[228] Providing and erecting Approved make Four pole moulded case 4.00 Ea. 16221.61

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected

in existing 16 G.M.S.housing ICS=100% of ICU only

[229] Providing and erecting Approved make Earth fault Relay suitable 1.00 Ea. 4983.34

to mount with inter connection suitable to following size of

moulded case circuit breaker having CT ratio & MCCB rating as

following along with shunt trip 220V AC. with all internal

connections & complete erected in existing M.S.housing. (2) 125 A

-200 A , CT Ratio 1/200

[230] Supply of Approved make Iron Clad or metal clad four pole change 1.00 Ea. 1275.63

over switch 415V. confirming to IS of following capacity (B) 32A

[231] Supplying & erecting approved make Four Pole 415V change over 1.00 Ea. 13353.21

switch interior for panel mounting with operating mechanism

A.C.23 duty confirming to IS for (E)250A / 320A cat III

[232] Supplying and erecting triple pole & neutral 440V / 500V panel 1.00 Ea. 1961.42

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour insulating

tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with necessary

connections.(A) Suitable for 100 Amp. Capacity

[233] (B) Suitable for 200 Amp. capacity 2.00 Ea. 3202.71

[234] providing and erecting Miniature circuit breaker single pole 0.5A 26.00 Ea. 270.68

to 2A system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

[235] Providing & erecting 240 V MCB double pole switch for lighting 14.00 Ea. 278.76

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity(A) 6 to 32 Amp. Cat

[236] Providing & erecting 415 V MCB Four Pole for Motor & Inductive 4.00 Ea. 668.62

Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity(b)40 Amp. Cat III

[237] Providing & erecting 415 V MCB Four Pole for Motor & Inductive 10.00 Ea. 737.30

Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity (c) 63 Amp. Cat III

[238] Providing and erecting Sheet Steel powder coated MCB 4.00 Ea. 3412.79

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

for (B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b) sheet steel double

door (iii)8 way

[239] Providing and erecting Approved make RCCBs conforming to IS: 12.00 Ea. 1969.50

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component.

for following Max. rating erected as directed (i) 25 Amps.DP Cat

[240] Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 1.50 Ea. 77.77

[241] Providing and erecting Pipe type earthing having 150 cms.long and 15.00 Ea. 368.65

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[242] For using salt and charcoal / coke as required for pipe type 15.00 Ea. 171.70

[243] Supplying & erecting earth pit of minimum bore dia.150mm size 3.00 Nos. 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For

Electrical Installation up to 440V in normal soilLength of pipe -

[244] Providing & erecting weather proof, dust & vermin proof, floor 2.94 Sq. Mtr 10468.65

mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged

doors, handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured

[245] Providing , erecting , fabricating the M.S. structure as per 250.00 Kg. 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete with

cutting, welding, grinding & finishing duly painted with one coat of

red oxide with erection on site as per direction of engineer in

charge with necessary grouting, cementing, plastering & finishing

[246] Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 30.00 Mtr 284.82

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

[248] Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 520.00 Mtr 126.25

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

size of cables (B) 4 core 6 Sq. mm

[249] Making trench in soft soil of suitable width of 90 cm deep for 80.00 Mtr 55.55

laying cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

[250] Making trench in Hard Murrum / Tar Road of suitable width of 90 40.00 Mtr 74.74

cm or required depth for laying any size of cable or locating the

fault all over the run and back filling the same and making the

surface as normal ground.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[251] Providing & laying approved make Double walled corrugated 455.00 Mtr 62.62

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable (A)50 mm outer dia

[252] Providing & laying approved make Double walled corrugated 125.00 Mtr 95.95

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cabl (C))90 mm outer dia

[253] Providing and, fixing heavy duty flange type brass cable gland with 6.00 Ea. 38.38

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm

[254] Providing and, fixing heavy duty flange type brass double 3.00 Ea. 75.75

compression type cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc

for following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm

[256] Solder less crimping type Aluminium lugs conforming to IS suitable 50.00 Ea. 6.06

for cable of following size evenly crimped with high pressure tool

& connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

[259] Solder less crimping type Copper lugs conforming to IS suitable for 200.00 Ea. 8.08

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

[260] Supply, Installation, Testing and Commissioning of suitable sweep, 74.00 Ea. 2629.03

BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC)

permanent ferrite magnet Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%, compitible

with electronic regulator unit for Speed Control and all remaining

accessories including safety pin, nut bolts, washers, temperature

rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload protection

50 Hz, Single phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer in Charge] (A)

[261] Supplying and erecting 19 / 20 mm. nominal bore Medium Class 74.00 Mtrs 108.07

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leckage and earthing.

[262] Providing 2.5mm.thick laminated acrylic sheet to cover the fan 74.00 Ea. 18.18

hook or Fan box.

[263] Supplying & erecting approved make low noise decorative exhaust 20.00 Ea. 1703.87

fan having square frame ABS body with inbuilt lowers & square

frame.200mm with 1350RPM Cat.II

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[264] Supplying and erecting approved make Octagonal pole made from 15.00 Ea. 8192.11

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement.(D) 6 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 59 kg

[265] Supplying & erecting approved make SMC press moulded 11.00 Ea. 476.72

composite FRP. loop-in, loop-out approx. 2mm thick box complete

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

mob & hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of

following size of box.(C)150mm x 125mm x 100mm [deep]

[266] Providing and erecting street light pole bracket comprising main B 15.00 Ea. 614.08

Class GI pipe of 4.2 cm/require outside dia. complete with suitable

B Class G.I sleeve tubing of approx. 45cms.length and suitable for

76.5 mm / 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of 1 mtr. length

with suitable rise as per site condition & suitable welded stiffener

reducer and nipple with check nut complete painted with one coat

of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.[A] Single Arm bracket

[267] Supplying and erecting B class Galvanized iron pipe having smooth 22.00 Mtr 215.13

finished bore of the pipe on both ends erected nuts and bolts

along the pole / wall shaping the pipe as per site requirement.

Pipe dia as following. (B) 32 mm dia

[268] Supplying & erecting IP 55 grade following size section pillar 1.00 Ea. 3595.60

fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in ground

to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by

IS 2147 of 1962 (B) 75 X 60 X 45 cm section pillar fabricated from

16 Gauge MS Sheet with angle iron legs 45 cm long made from

X 35 X 5 mm thick MS angle.

[269] Supplying and erecting nuwood 12 mm thick on existing angle iron 1.00 Sq.Mtr. 291.89

[270] Supplying & erecting approved make time switch with single pole 1.00 Ea. 2354.31

air break contacts suitable for 230 V.15/16A.complete with self

starting motor driven clock ‘ON’ &’ OFF’ automatic arrangement at

any predetermined time during each 24 hours,With nickel

cadmium rechargeable battery backup erected as directed.

[271] Supplying & erecting power contactor ,AC3 duty for time switch 1.00 Ea. 857.49

complete erected as per direction Cat III (C) 4 pole 440V 16 Amp.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[272] Providing and erecting approved make split air-conditioning unit 3.00 Ea. 59293.06

consisting of copper condensing unit with fan motor, hermetically

sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes powder coated

Stand, Eco Friendly green gas charging, 15A plug top & Remote

Control) with necessary core cutting.(1)For ISEER Range

(KWH/KWH)(3.1 to 3.99) Premium Category(c) for 1.7 to 2.0 ton

[273] Supplying and erecting insulated pair of soft copper tubing open or 24.00 Rnmtr. 965.56

concealed including power and control cable,necessary PVC drain

pipes for Split AC machine up to 4 TR capacity

[274] Providing & erecting water cooler having storage capacity 150 Ltr. 2.00 Ea. 55893.40

& cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚C within a hour,

The water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded

by evaporating, coil, thermostats, relay etc.complete with

necessary inlet & outlet connection. The body of water cooler will

be made from Stainless Steel.

[275] Supplying & erecting 5 stage single reverse osmosis water 2.00 Ea. 29187.99

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention with 40 psi

inline type post carbon filter auto low & high pressure switches

with following size of storage tank & LPH capacity & erected as

directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump

[276] Supply and Erecting of Static Stabilizer suitable for following 3.00 Ea. 4029.90

capacity of A.C Machine the Stabilizer Must have Minimum

Technical Specification are Input working Single Phase Voltage

Range Up to 150V-280V.50Hz, Output Voltage Range Up to 200V-

240V,50Hz,Autoreset Facility,LED Display for Indicating

Voltage,Spike/Surge Protection,Time Delay Facility,Proper Wall

Mount Facility with Required Accessries & on site 3 year

Replacement/Repairing Warranty.(2) For 2 Ton Thermal Overload

Protection 15 Amp.

[277] Supplying and erecting approved make panel mounting type 3.00 Ea. 1275.63

Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts

range erected on existing panel board with all connection, wiring

etc .with manufacturers calibration certificate.

[278] Supplying and erecting approved make panel mounting type 3.00 Ea. 1558.43

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate on

500 Volt AC , erected on existing panel board with all connection,

wiring etc .with manufacturers calibration certificate.

[279] Supplying and erecting approved make Analog type moving iron 9.00 Ea. 1584.69

C.T operated Ammeter A C Current suitable slide in scale 0-

Amp. with 3 Nos. of Current Transformer erected on panel board

with connections.

[280] Supplying and erecting Ammeter / Voltmeter selector switch for 3 6.00 Ea. 317.14

phase AC Supply 500 V on existing panel board with necessary

[281] Supplying and erecting approved make suitable panel indicator 9.00 Ea. 43.43

LED type lamp, lens cover, complete erected with necessary

[282] Providing & erecting open well horizontal mono block pump set 2.00 Ea. 15707.52

with cast iron body, complete for three phase submersible motor

having [C] For 3 HP 3 phase open well horizontal mono block

pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr

head suitable for 50/65 mm dia delivery pipe Cat II

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[283] Supplying & erecting approved make motor control cubical panel 2.00 Ea. 7250.79

[Star delta] made from 16G CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking with

suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses.

Digital volt and current meter (in a single unit) with micro

controller based control unit and current sensing single phasing

preventer electronic overload protection, over voltage

(Programmable) protection and under voltage (Programmable)

protection, prod less dry run protection programming facility for

setting of all parameter like overload current, high voltage limit,

low voltage limit, dry run limit with digital indication on seven

segment LED display for any fault like over load, high voltage, low

voltage, dry running single crimped, electronic star delta timer,

feather touch start / stop push buttons to be erected on angle iron

frame. Grouted on wall the contactors will be of L& T, Siemens,

BCH make only) (A) DOL up to 5.0 H.P.

[284] Lowering of submersible motor pump set at the depth of following 2.00 Per Job 856.48

,complete with required. Nos. and size of casing pipes erected by

means of proper chain pulley block & pipe wrenches after

checking of threads of each pipe with coupling to take the load of

the pump set and pipe assembly filled up with water (D)For Open

well Horizontal submersible pump set for sump well

[285] Providing and erecting ISI marked PVC insulated PVC Sheathed 50.00 MTR 104.03

Flat flexible Submersible copper cable approved make of

following Size. (B) 3 Core x 2.5 Sq. mm.

Four CroreEleven Lakh Fourty Five Thousand Two Hundread Four Rupees andSixty Six Paisa Only

I/We am/are willing to carry out the work at…………………………………………….% above/below percent (Should be written in figures and words)

of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct…………………………% below Add…………………………% Above

In Worlds In Worlds

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design

the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. Credit of dismantled materials of amount of Rs. 0.00/- must be recovered from contractor's 1st R.A. bill.

6. All duties, taxes, and other levies except GST payable by the contractor under the contract, or for any other cause shall be included

in the rates, prices and total Bid Price submitted by the Bidder. (GST will be paid extra)

Dated Signature of Dy. Executive Engineer Executive Engineer

the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division