Painting, Re-painting and Re-polishing Work in the Married Students Hostels, International Management Development Centre (IMDC), Student Dorms. And Academic block at the New Campus of IIM Ahmedabad.

Amount

DORM-19 TO 25

PAINTING OF WALLS: A) Repainting of walls of dorm building of IIMA new campus. Details are as follows. B) Cleaning of the painted surface by using sand paper C) P&A two and more coats of Lustre paint ( Asian or Eqv.) on prepared surface. First coat by using brush and second coat by roller to get even shade as approved by engineer in charge. (Actual area will be measured & paid)

Furniture Work The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on following items as per sample. Sizes are indicative it may vary + 50mm. Note : Photos of relevant items are attached at last.

Single bed of size 2.010x0.910x0.360m

Side table of size 0.400x0.400x0.400m

Cupboard of size 1.070x2.010x0.615m deep(Only from outside)

Work table of size 2.920x0.690m with shelve of size 2.540x0.450x0.360m

Easy chair of size 0.590x0.550x0.520m

Sitting Bench at rest room of sitting size2.970mx0.420m & rest size 2.970mx0.450m

Pantry cupboard of size 2.210mx0.750mx0.300m

Door window work The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying Tel pani polish (two coats) of safola linseed oil on existing doors and windows as directed form inside and out side of building

On wooden door window & Louvers

Door window work with metal frame

Tel paani and Enamel Work: The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying Tel pani polish (two coats) of safola linseed oil on existing doors and windows & Applying two or more coat of Enamel paint ( Asian or Eqv.) of approved shade on existing metal frame of wooden door & window with removal of rust with sand paper and wire brush and apply zinc chromate on it as directed with cleaning. Complete in all respect.

On wooden doors and windows of rooms of student dormitories

On wooden door & window & louvers with metal frame and glass panels and partition of Common Area (inside & outside) : Double Storey Ht. Rate shall be inclusive of providing, erecting, and dismentling of form work (H-frame) as and when required. (Approx. Size: 6.21 mtr x 6.37 mtr.)

On wooden door & window & louvers with metal frame and glass panels and partition of Common Area: Single Storey Ht. Rate shall be inclusive of providing, erecting, and dismentling of form work (H-frame) as and when required. (Approx. Size: 4.5 mtr x 3 mtr.)

On wooden door & window & louvers with metal frame and glass panels and partition of Common Area: Single Storey Ht. Rate shall be inclusive of providing, erecting, and dismentling of form work (H-frame) as and when required. (Approx. Size: 1.2 mtr x 3 mtr.)

The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.)

P & A one and more coat of enamel paint of approved shade and make (Asian or equivalent) on M. S railing with removal of rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces. Sizes are of wall opening it may be vary + 75mm Note : Photos of relevant items are attached at last.

Balcony railing of guest room R-1 Size 1.530 X 0.920 m M.S. railing with perforated sheet

Passage railing R-2 Size 2.040m x 0.845m

Passage railing with sitting R-3 Size2.040mx0.845m

Rest Area Railing R-4 size 6.050mx1.00m

Rest Area Railing R-5 size 6.400mx1.00m

Rest Area Railing R-6 size 2.890mx1.00m

Passage railing R-7 size1.310x0.845m

Railing at staircase with gateR8 size3.10x0.88m

Terrace railing R9 height 0.82m

Stair railing of 40mm dia pipe R10

Stair railing with vertical supportR11

P & A one and more coat of enamel paint of approved shade and make (Asian or equivalent) on Metal surface with including removal of rust with sand paper and wire brush and apply zinc chromate on it on all surfaces. (Actual area will be measured & paid)

Furniture The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on following items as per sample. Sizes are indicative it may vary + 50mm.

Single seater sofa size 0.750 x 0.600 x 0.700m h

Single bed size 1.950 x 0.900 x 0.350m h

T.V Unit of size 1.070x0.350x0.350m

Wardrobe (From Outside only) size 1.200 x 2.800m h

Work table size 1.550 x 0.690 x 0.740 m h with selves 1 no 1.550 x 0.375 and 2 no 1.550 x 0.300

Side Table 0.400 x 0.400 x 0.400m h

side table size 0.600 x 0.400 x 0.400m h

Mirror cabinet in bathroom of size 1.50x0.90x0.140m

Photo frame of size 0.550x0.550m

Photo frame of size 0.400x0.550m

The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on existing furniture as directed by engineer in charge.(Actual area will be measured & paid)

Doors & windows with wooden frame The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying Tel pani polish (two coats) of safola linseed oil on existing doors and windows as directed from inside and out side of building.

Door window work with metal frame The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying Tel pani polish (two coats) of safola linseed oil on existing doors and windows & Applying two or more coat of Enamel paint ( Asian or Eqv.) of approved shade on existing metal frame of wooden door & window with removal of rust with sand paper and wire brush and apply zinc chromate on it as directed

M.S. Railing P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on M. S railing with removal of rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces. Sizes are of wall opening it may be vary + 75mm Note : Photos of relevant items are attached at last.

Balcony railing of guest room Size 1.150 X 0.920 m R-1 (With Perforated M.S. Sheet)

Passage railing size 1.31m x 0.995m R-2 (Box section Size 60 x 40 mm railing with wall supports)

Passage railing size 1.88mx0.995m R-3 (Box section Size 60 x 40 mm railing with wall supports)

Room passage railing size 2.10mx0.995m R-4 (Box section Size 60 x 40 mm railing with wall supports)

Room passage railing size 1.310mx0.995m R-5 (Box section Size 60 x 40 mm railing with wall supports)

Room passage railing with sitting size 2.100mx0.995m R-6 (Box section Size 60 x 40 mm railing with wall supports)

Backside of lift railing of size 6.06mx0.995m R-7 (Box section Size 60 x 40 mm railing with vertical supports)

Multi purpose room railing of size 4.38mx0.995m R-8 (Box section Size 60 x 40 mm railing with vertical supports)

Multi purpose room railing of size 5.95mx0.995m R-8 (Box section Size 60 x 40 mm railing with vertical supports)

Pantry side railing of size 4.40mx0.995m R-8 (Box section Size 60 x 40 mm railing with vertical supports)

Terrace railing (Box section Size 60 x 40 mm railing with vertical supports)

Stair railing of 40mm dia pipe at wall supports (Box section Size 60 x 40 mm railing with vertical supports)

Stair railing of 40mm dia pipe with vertical support

General Items P & A one and more coat of enamel paint of approved shade and make (Asian or equivalent) on Metal surface with including removal of rust with sand paper and wire brush and apply zinc chromate on it on all surfaces. (Actual area will be measured & paid)

Painting and Polishing Work of Dorm 28 to 35

Furniture The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on following items as per sample. Sizes are indicative it may vary + 50mm.

Single seater sofa size 0.750 x 0.600 x 0.700m h

Single bed size 1.950 x 0.900 x 0.350m h

Study Table 1.45 X 0.76 X 0.60 m

wardrobe (From Outside & Inside) size 2.23 x 2.800m h

Side Table 0.400 x 0.600 x 0.400m h

Mirror cabinet in bathroom of size 0.48x0.75m

Book Rack - BED Room- size : 1.05 X 0.75 m (D- 30 & D-34)

Double bed size 2.00 x 1.5 x 0.350m h (D- 30 & D-34)

Dinning Table with Chairs - Dia - 1mt size (D- 30 & D-34)

Centre Table -size : 0.40 X0.60 X 0.35 (D- 30 & D-34)

Book Rack with Soft Board size: 1.80 X 0.75 (D- 30 & D-34)

Glass Partition size : 0.60 X 2.52 m (D- 30 & D-34)

Kitchen Basket & Storage size :2.29 X 0.80 m (D- 30 & D-34)

Kitchen Storage size : 2 X 0.60 m (D- 30 & D-34)

Mirror Cabinet with storage in bed room size : 0.60 X 1.80 (D- 30 & D-34)

Side Table 0.45 x 0.60 x 0.45 m (D- 30 & D-34)

Side tables Sets 0.45 x 0.60 x 0.40 h (D- 30 & D-34)

Study Table with storage size : 1.45 X 0.76 X 0.60 m (D- 30 & D-34)

Study Table with storage at living room size : 1.45 X 0.76 X 0.60 m (D- 30 & D-34)

TV wall mounted stand size : 0.76 X 0.30 (D- 30 & D-34)

Two Seater Sofa size 1.35 x 0.68 x 0.350m h (D- 30 & D-34)

wardrobe (From Outside & Inside) size 2.75 X 2.52 m (D- 30 & D-34)

Single seater sofa size 0.750 x 0.600 x 0.700m h (D- 30 & D-34)

The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on existing furniture as directed by engineer in charge.(Actual area will be measured & paid)

Doors & windows with Louvers with wooden frame The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying Tel pani polish (two coats) of safola linseed oil on existing doors and windows as directed from inside and out side of building

M.S Railing P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on M. S railing with removal of rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces. Sizes are of wall opening it may be vary + 75mm (All rate inclusive of Hand rail wood polish work) (Photo attached for reference)

Balcony railing of student room R-1 Size 1.550 X 0.60 m (M.S. railing with perforated sheet)

R-2 Size 1.55 m x 0.20 (M.S. railing with perforated sheet)

balcony railing R-3 Size 0.710 m x 0.780 m (M.S Railing)

Duct gate R-4 Size 1.06 m x 0.300m (M.S Railing)

M.S railing R-5 Size 1.55 m x 0.60 (M.S Railing)

Stair+ Passage railing (includs polishing of wooden hand rest) Ht.+= 1.160 m ht.

Landing railing R-7 size 1.140 m X 1.160 m (Stair railing)

G.F. Passage Railing Type 1: Size 1.5 m x 3.0 m

G.F. Passage Railing Type 2: Size 3.0 m x 3.2 m

G.F. Passage Railing Type 3: Size 1.5 m x 3.0 m

Passage Railing (includs polishing of wooden hand rest)

R-12 size 2.47 X 0.44 m (RCC circle railing)

R-14 Size 0.86 m x 1.55 (Terrace railing)

R-15 Size 4.60 m x 0.45 m (Terrace railing)

R-16 Size 1.35 X 0.90 m (Terrace railing)

size 2.10m X 1.12m (both side required to paint) (Terrace doors (M.S))

Scrapping of the existing Painting surface using SAND paper & WATER paper to the maximum. Providing and applying two or more coats of putty work three coats of wall primer to complete satisfaction of the Engineer. The rates shall be inclusive of surface preparation ;filling of holes and edges with P.O.P. Providing and applying three coats of Plastic Emulsion Paint as per manufacturer's specification, cleaning the floor, doors, windows and switch boards etc. complete as directed.

Married Student Housing(MSH)

Furniture Work The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on following items as per sample. Sizes are indicative it may vary + 50mm. Note : Photos of relevant items are attached at last.

Single seater sofa size 0.648 x 0.600 x o.685m h

Single bed Size 1.805 x 0.900 x 0.305m h

TV Unit size 1.950 x 0.500 x 0.600 m h

Wardrobe (From Outside only) size 1.580 x .650 x 2.887m h

Dressing Mirror and table Size 0.450 x 1.200m

Dining table with chairs(4 no's) size of chair 0.400 x 0.400 x 0.800m h

Kitchen cabinet wall hung size 1.500 x 0.280 x 0.730 m h

Kitchen cabinet floor mounted size 1.500 x 0.350 x 0.815m h

Centre Table size 0.750 x 0.500 x 0.400m h

Book storage size 1.00 x 0.305 x2.140m h

Storage table below study table size 0.55x0.43x0.63m

Shoe rack size 1.18 x 2.42 x 0.300m

Work table of size 2.920x0.600m & soft board of size 1.760x0.600m

Double bed with storage of size 1.800x1.960x0.360m

Doors & windows with louvers and wooden frame The wood /plywood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying Tel pani polish (two coats) of safola linseed oil on existing doors and windows as directed form inside and out side of building

Doors & windows with metal frame The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying Tel pani polish (two coats) of safola linseed oil on existing doors and windows & Applying two or more coat of Enamel paint ( Asian or Eqv.) of approved shade on existing metal frame of wooden door & window with removal of rust with sand paper and wire brush and apply zinc chromate on it as directed

The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on existing furniture as directed by engineer in charge.(Actual area will be measured & paid)

M.S Railing P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on M. S railing with removal of rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces. Sizes are of wall opening it may be vary + 75mm Note : Photos of relevant items are attached at last. M.S. railing with perforated sheet

Balcony railing R-1 Size 2.400 X 0.920 m

Ground floor Passage railing R-2 Size 6.050m x 0.920

Passage railing R-3 Size 3.700m x 0.920 m

Passage railing R-4 Size 1.180m x 0.920m

Passage railing R-5 Size 0.940m x 0.920

Ground floor Passage railing R-6 Size 1.560m x 0.920m

Ground floor Passage railing R-7 Size 2.270m x 0.920m

Terrace railing

Stair railing of 40mm dia pipe at wall supports

Stair railing of 40mm dia pipe with vertical support

MSH entry gate of size 1.20 x 1.36m

P & A one and more coat of enamel paint of approved shade and make (Asian or equivalent) on Metal surface with including removal of rust with sand paper and wire brush and apply zinc chromate on it on all surfaces. (Actual area will be measured & paid)

Painting and Polishing Work of IMDC Building

Ceiling: A) Painting of ceiling and bend of wall of IMDC guest room B) The surface shall be thoroughly cleaned and dust off. All rust,dirt,scales, smoke splashes, mortar dropping shall be thoroughly removed before painting is started C) Providing and applying three coats of Birla white or eqv. Putty on it for level the surface D) Providing and applying one coat of wood primer of approved over the levelled the surface E) P&A three coats of Lustre paint ( Asian or Eqv.) of approved shade on prepared surface. First two coats by using brush and third coat by roller to get even shade as approved by engineer in charge

Furniture Work The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two/more coats of Lacquer polish ( Taralac or eqv.) on following items as per sample. Sizes are indicative it may vary + 50mm. (photo attached for reference)

Single seater sofa Size 0.710 x 0.710 x 0.710m h

Diwan cum bed size 2.004 x1.185 x 0.582m h

T.V Table Size 1.800 x 0.510 x 0.590m h

open cabinate+wardrobe (From Outside only) Size 2.170 x 2.800m h x 0.650m d

Dressing Mirror size 0.400 x 1.200m h

work board size 1.740 x 0.710 x 0.065mh with selves 3 no size 1.740 x 0.300m x0.045mh

Linen storage1.190 x 0.450 x 0.590m h

Side table Size 0.400 x 0.550 x 0.400m h

Mirror cabinet in Bathroom size1.65x0.91m

Picture frame size 0.600x0.600m

Picture frame size 0.450x0.600m

Polish on Doors, windows, and Office Furniture

Doors & windows with wooden frame The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying Tel pani polish (two coats) on existing doors and windows as directed form inside and out side of building On wooden door & window

Door window work with metal frame The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying Tel pani polish (two coats) on existing doors and windows & Applying two or more coat of Enamel paint ( Asian or Eqv.) of approved shade on existing metal frame of wooden door & window with removal of rust with sand paper and wire brush and apply zinc chromate on it as directed On wooden door & window & louvers with metal frame

Wooden Tables (Big): The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) actual area will be measured and paid. Approx. Size: 0.60 mt x 1.50 mtr

Wooden Tables (Small):The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) actual area will be measured and paid. Approx. Size: 1.350 mtr x 2.40 mtr

Race Ways & AC Panels: The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) actual area will be measured and paid.

M.S Railing P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on M. S railing with removal of rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces. Sizes are of wall opening it may be vary + 75mm (Photo attached for reference) M.S. railing with perforated sheet

Balcony railing of guest room R-1 Size 1.530 X 0.920 m

Passage railing

Repainting and Repolishing Work of Academic Block Doors, Windows & Furniture

Door window work with wooden & metal frame

The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying Tel pain polish (two coats) on existing doors and windows along with approved shade of oil paint paints on peripheral metal frame (if any) as directed form inside and out side of building On wooden door & window with wooden frame

Furniture/Partition work

The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.)

Seating bench Size (1.4 m x 0.47 m): The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on following items as per sample. Sizes are indicative it may vary + 50mm.

Notice board Size (6.14 m x 1.43 m ): The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on following items as per sample. Sizes are indicative it may vary + 50mm.

Faculty Table of Classrooms(1.050x0.600x0.750m ): The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on following items as per sample. Sizes are indicative it may vary + 50mm.

Lactones of Classrooms(0.600x0.600x1.00m ): The wood work shall be cleaned of grease and dirt by rubbing fine sand paper and providing and applying two coats of Lacquer polish ( Taralac or eqv.) on following items as per sample. Sizes are indicative it may vary + 50mm.

M.S Railing P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on M. S railings (including base plate and MS flange, etc) with removal of rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces.

M.S. Railing: 50mm dia. pipe P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on 50mm dia. M. S railing pipe (including round plate and MS flange) with removal of rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces.

M.S. Railing: Type 1 Size: 1.00 mtr x 6.30 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 2 Size: 1.00 mtr x 0.920 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 3 Size: 1.00 mtr x 2.50 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 4 Size: 1.00 mtr x 3.50 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 5 Size: 1.00 mtr x 1.630 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 6 Size: 1.00 mtr x 3.50 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 7 Size: 1.00 mtr x 4.70 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 9 Size: 1.00 mtr x 13.00 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 10 Size: 1.00 mtr x 13.30 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 11 Size: 1.00 mtr x 6.33 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 12 Size: 1.00 mtr x 5.50 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 13 Size: 1.00 mtr x 1.84 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 14 Size: 1.00 mtr x 4.08 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 15 & 16 Size: 1.00 mtr x 1.50 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

M.S. Railing: Type 18 Size: 1.00 mtr x 142.55 mtr (approx.) P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on existing metal surface with removal of rust with sand paper and wire brush and apply zinc chromate on it.

Repainting of Street Light Poles

P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on street light poles with junction box and top cover of light including removal of old paint, rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces. Diemensions of Poles: Dia.: 8 cm, Height: 7' aprrox.

P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on street lights' top metal cover including removal of old paint, rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces. Dimensions of Poles: Dia.: 8 cm, Height: 7' approx..

Repainting of Brackets

P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on supporting brackets of EWC including removal of white cement, old paint, rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces. Diemensions of brackets: Length= 6" approx, Width= 1.5" approx

P & A two and more coat of enamel paint of approved shade and make (Asian or equivalent) on supporting brackets of wash basins including removal of white cement, old paint, rust with sand paper and wire brush and apply zinc chromate on it of the following location on all surfaces. Diemensions of brackets: Length= 8-10" approx, Width= 1.5" approx

Ajabsingh B Baghel