PROVN OF 05 X REVENUE WORKS AND AND 01 X MINOR WORK AT CERTAIN LOCATIONSUNDER AGE B/R-I AND AGE E/M OF GE (NORTH) BINNAGURI

Amount

Surface dressing n.exc (not exceeding) 15cm deep and getting out in Soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Soft/loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for RCC M25 (Design mix) in foundation incl raft, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles & mass concrete complete all as specified and directed.

M&L for RCC M25 (Design Mix) in columns,pillars, piers, posts, struts etc complete all as specified and directed.

Use and waste for formwork to concrete foundations, footings, bases of columns, rafts & raft bases , sides & soffits of foundations , plinth beams and similar works in fair finished surface complete all as specified and directed by Engr-In-Charge.

Use and waste for formwork to sides of pillars, posts, struts, piers, columns etc rough finished surface square, rectangular on plan or polygonal complete all as specified and as directed.

Material and labour for Mild steel deformed or twisted bars (TMT) 6 to 8mm , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/slab/ as in ribs, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

Material and labour for Mild steel deformed or twisted bars (TMT) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/slab/ as in ribs, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

M&L for RCC M25 (Design Mix) in beams, cantilevers, bressumers, lintels over 1.5 m span etc complete all as specified and directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. flat rough finished surface of concrete complete all as specified and directed.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength not less than 75Kg sqcm, straight or curved on plan exc 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and as directed.

M&L for RCC M25 (Design Mix) in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

M&L for RCC M25 (Design Mix) in chajjas etc complete all as specified and directed.

Use and waste for formwork to chajjas including edges in rough finished surface of concrete flat complete all as specified and as directed.

S&F steel ventilator centre hung shutter including hinges, steel peg stay, fixing lugs etc as per drg No. CESZ/2018/TD 07, Sheet No. 1/3 to 3/3 complete with or without glazing bars all as specified and as directed.

S&F for factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colur PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplied and fixed in the frame at site as per specification and drawings complete all as specified and as directed.

S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube complete all as specified and as directed.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100 mm long Stain less steel butt hinges complete all as specified and as directed.

S&F aluminium handles cast type anodised 150mm of size complete all as specified and as directed.

S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished fair and even without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

M&L for 15 mm thick plaster of cement mortar (1:4) rendering in two coats (10+5mm) on fair faces of brick work with water proofing compound @200 ml per bag of cement or as per manufacturer's instructions finishing the surface even & smooth without using extra cement complete all as specified and as directed. (NOTE :Water Proofing Compound shall be measured and paid separately under relevant item of this Schedule 'A')

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) complete all as specified and as directed.

Supply only liquid water proofing compound conforming to IS: 2645 - 2003 complete all as specified and as directed.

M&L for preparation of new plastered surfaces on wall / ceiling / chajjas and applying Two coats of 10-0% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with flow speed of minimum 1 Ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.

M&L for three coats of white wash on walls over newly plastered surfaces of wall including preparation of surfaces etc complete all as specified and as directed.

M&L for anodised Aluminium snap grid frame work for false ceiling all as specified with Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&FRolled mild steel work in tubular trusses MS pipes in vertical column,parlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 of 1979 grade st 240 with one shop coat complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M&L for 100 mm thick cement concrete type D2 1:4:8 with 40 mm graded stone aggregate as in sub base etc all as specified and as directed

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.

Material and labour for glazed ceramic coloured / digital printed/Elevation tiles of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in as in ridges, valley, eaves, etc with self tapping screws complete all as specified and as directed.

M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in sub base complete all as specified and directed.

S&F of Tubes, medium grade 15mm bore galvanised with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

S&F 15mm dia fancy type Bib taps chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F 15 mm dia CP cast copper alloy angle cock screwed for iron pipe and fixed complete all as specified and as directed.

S&F in 15 mm bore pillar taps, capstan head, cast Copper alloy, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fixed vitreous china wash basin (WHB), white, flat back, size 550 mm x 400 mm (1st quality) including brackets, waste fittings, brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but excluding providing brackets, waste pipe & CP waste coupling, PVC connection 450 mm long complete all as specified and as directed..

S&F swivel shower of brass CP with shower arm 125 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed.

S&F in 10 ltr capacity PVC flushing cistern low level white colour with inlet ball valve float and handle including brackets incl PVC connection 450 mm long, PVC flush pipe of required length and connections to pipe etc complete all as specified and as directed

S&F vitreous china squatting pan"Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap front or back inlet etc including connection to trap and flushing pipe and provision of cement concrete bedding complete all as specified and as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F of PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement outer dia 75 mm cement concrete (1:2:4), type B1 including complete all as specified and as directed.

S&F ball valves of 20mm bore high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms) complete all as specified and as directed.

Supplying & fixing of PVC water storage tank 500 ltr capacity HDPE double layered, cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection including locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 20 mm - 210 gms) complete all as specified and as directed. Note : GI inlet, outlet & wash out pipe will be measured and paid separately.

S & F brass chromium platedTubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F PVC connection pipe 15mm size with P&T nuts of length 450mm complete all as specified and as directed.

S&F of PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement outer dia 75 mm cement concrete (1:2:4), type B1 including complete all as specified and as directed.

S&F 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.

S&F for Reinforced concrete pipe (SWR) bends (bore of 150mm) any radius fixed to Pipes/Steel Gutters etc complete all as specified and as directed.

S&F 100mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.

S&F for Reinforced concrete pipe (SWR) bends (Bore of 100mm) any radius fixed to Pipes/Steel Gutters etc complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M&L for 200 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.

S&F for Reinforced concrete pipe (SWR) bends ( Bore of 200mm) any radius fixed to Pipes/Steel Gutters etc complete all as specified and as directed.

S&F for RCC (SWR) branch piece (Bore of 200mm), single Y equal or unequal radius fixed to Pipes/Steel Gutters etc complete all as specified and as directed.

M & L Cement concrete 1:4:8 type D-2 bed to 200mm dia bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.

M&L for removing excavated material soil beyond 50 m and upto a total distance of 250 m depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M & L for PCC 1:2:4 type B1 as in surface channel, benching and drains in manholes complete all as specified and as directed.

M&L for Precast RCC 1:2:4 type B1 ( using 20mm graded aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face complete all as specified and as directed.

M & L Cement concrete 1:3:6 type C1 (using 20mm graded aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for Cutting into existing manholes for connecting new drains, for internal dia of 200mm pipe and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for RCC M25 (Design Mix) as in slab supported on walls, beam, columns in floor, roof, shelves complete all as specified and as directed.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength not less than 75Kg sqcm, straight or curved on plan exc 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 250 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.

S&F for Reinforced concrete pipe (SWR) bends ( Bore of 250mm) any radius fixed to Pipes/Steel Gutters etc complete all as specified and as directed.

S&F for RCC (SWR) branch piece (Bore of 250mm), single Y equal or unequal radius fixed to Pipes/Steel Gutters etc complete all as specified and as directed.

M & L Cement concrete 1:4:8 type D-2 bed to 250mm dia bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.

Use and Waste for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) all as specified and directed .

Use and Waste for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide , all as specified and directed by Engineer-in Charge.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches or in floors complete all as specified and as directed.

S&F 110mm dia PVC SWR vent cowl complete all as specified and as directed.

S & F Rolled Mild steel sections of Fe-410 (Gde E 250) as in main and cross beams, hip and jack rafters; purlins etc where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete.

M&L for providing plain cement concrete type B1 1:2:4 with using 20mm graded stone aggregates in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Extra for forming fair finish to drain or channel 30 cm internal girth in cement conc using extra cement including forms moulds/mitred stopped ends etc.

S&F Mild steel framed work such as grills, gratings, guard bar, holdfasts etc with ends of bars shouldered or riveted or for forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290. Gde -E- 165 complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed.

M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enameled paint including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M&L for preparation of newly or old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying one coats of cement based wall care putty including complete removal of existing treatment all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises including taking down cement plaster.

M&L for Vitrified Ceramic tiles light shade 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but n.exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. ( screed bed shall also deemed to be included in the quoted rate by the contractor)

Material and labour for Vitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

M & L for 15 - 18 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified.

Demolition of wall and ceiling board (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet , complete all as specified and as directed.

S&F for solid PVC Wall Lining consisting of 5mm thick of wood grain printed PVC inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

S&F for GI frame work for seamless ceiling comprising of FI perimeter channel 0.55 mm thick with two unequal flange of 20 and 30 mm dia and Web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx 900 mm centre to centre with FI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mm length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete as specified and directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions fixed or laid/ inserted to timber/GI/Aluminum framework 4mm thick with screws complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F 5.5mm thick Sheet glass, ordinary quality, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed.

S & F solar control film 50 micron reflective type sticked to glass panes complete all as specified and as directed.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified and as directed.

S&F 10mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed. Note:- Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work.

M&L for stainless steel door fittings Patch set Dorma XLC 4001 or techno equivalent ,Top set-01 nos , Bottom patch- 01 Nos ,Top pivot- 01nos , Lock patch-1 nos , & 100 kg double action floor spring complete all as specified and as directed.

M&L for stainless steel H type pull handle 400x22mm complete all as specified and as directed

S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete Fe-410- W(Gde E-250) quality B complete all as specified and as directed.

M&L 18-19 mm thick pre laminated particle board, interior grade,prelaminated one side with decorative choice lamination&other side balancing white lamination, fixed with screw to MS frame work complete all as specified and directed.

Supply and fixed powder coated anodised glazed aluminium sections weighing 0.55kg/m made of Square/tubular Aluminium section for partition with one or more rebates complete all as specified and as directed.

S&F aluminium handles ' D' type125 mm size cast type anodised complete all as specified and as directed.

S & F 75mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed FRLS cable ,single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC medium grade casing caping (Double lock pattern) and accessories (ISI Marked) on walls/other surface etc incl provn of 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable FRLS as earth continuity conductor (green in colour) & PVC switch box heavy duty of appropriate size on wall/other surface (ISI Marked) for housing switches/socket outlet, Fan regulators etc complete all as specified and directed for the following :- (a) One Light Point/ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps.

All as per item No 120 above but one socket out let 5/6 amps point on the independent board.

All as per item No 120 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board

S&F of switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.

S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and as directed.

S&F Switch socket combination 2 and 3 Pin, 5/16 amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and as directed.

S&F of ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F of deluxe fan Electronic regulator AC 50 Hz rotary step white/ivory finish complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F 4 feet LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type (decorative) batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 Single side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to ceiling rose complete all as directed by Engineer-in-Charge.

S&F Decorative focus light fixture made up of polycarbonate suitable for 15 Watt LED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting complete all as specified and a directed.

S & F Recess round shape LED ceiling light 12 Watt fitting (6'' outer dia) for Armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection ,complete all as directed by Engineer-in-charge.

S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminum IP 66 security light fitting luminaries with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge.

S&F LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F Recess mounting flat panel 34 Watt LED fitting (2'X2') for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection ,complete all as directed by Engineer-in-charge.

M&L for point wiring complete for one power point for one metal plug & socket for geyser point on independent board with 4.0 sqmm multistranded copper conductor single core PVC insulated unsheathed FR LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non metallic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.00 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for metal plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles.

S & F epoxy powder coated sheet metal enclosure with socket plug top & MCB, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 32 Amps ,240 Volts, 'C' series current carrying capacity 10 KA, including necessary connection complete all as specified and directed.

Material and labour for concealed sub-main wiring along with earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete all as specified and as directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 4 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete all as specified and directed.

S&F MCB, Single pole & neutral, 35 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete all specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete all specified and as directed.

S&F MCB, Single pole & neutral, 32 amps, 240 volts, ‘C’ curve, 10KA all complete as specified as directed.

S&F of ceiling fan with all accessories 230 volts 1200 mm sweep BEE 5 Star Rated conforming to IS-374 :1979 complete pre-wired with three core cable all as specified and directed by Engr-in-charge.

S&F heavy duty exhaust fan 300 mm sweep MS body with anti dust painting, 4 blade with heavy duty motor and double ball bearing, 1320 RPM, single phase 230/240 volts copper wounds, Air delivery -1600 CMH complete with all accessories as bird guard/ louvers shutters etc incl making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM(1:4) and finishing the surface as per existing color scheme complete all as specified and as directed.

S&F exhaust fan with louvers 250 mm sweep (Plastic rust proof Body and blade), BLDC Fan, energy efficient, AC single phase 240 volts, 50Hz,, Air Delivery – 860 CMH and connecting up complete including built in louvers and provision of 3 core flexible multistranded copper conductor of size 0.75 Sqmm from ceiling rose to fan all as specified and as directed. Note : The cutting of wall for fixing of exhaust fan is included in the quoted rate.

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire of size 4mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate of SSR Part- I including testing on completion all as specified and as directed.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated,FRLS screened, PVC bedded, galvanized steel strip or wire armored LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 10 sqmm 2.0 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (NOTE: Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this schedule 'A' part).

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 16 sqmm 2.0 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').

Supply and laying sub class B bricks of size 25cmx15cmx7.5cm for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

M & L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A'.

M&L for 40 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

S&F LED lights fittings 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three coarse flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

M&L for 50 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.

S.N. GHOSH AND CO. (BID ID -3479149)

M/S PAWAN ENTERPRISE (BID ID -3478873)

Biswanath Sharma (BID ID -3480608)

M/s D J Ghosh (BID ID -3479454)

ROZI KHAN (BID ID -3478983)

M/S JAGDISH PRASAD AGARWALA (BID ID -3477891)

SHRI MANOIRANJAN BISWAS (BID ID -3478254)

M/S SHYAM ENTERPRISE (BID ID -3478011)

CENTRAL ENGINEERING WORKS (BID ID -3479875)