Renovation and Refurbishment of the office of the Physics Department false ceiling, white wash, office tables, floor mat & Curtains in SVU Campus, Tirupati

Dismantling of brick mansonry in cement mortor carefully stacing the materials usefull for reuse and clearing away all the debris to the low level areas around the building / site with initial lead and lift etc., complete for finished item of work and as directed during execuiton.

Providing, fabricating assembling and fixing in position, anodized Aluminium doors powder coated minimum 60-70 microns Jindal/ Hindalco or equivalent make using following aluminium mat finish or glossy finish,Outer frame Plain section 101.60 x 44.45mm thickness .18mm, section weight 2.404 kg/m, door shutters vertical section 44.62 x 44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62 x 44. 45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.30 x 44.45mm thickness 3.18mm, section weight 2.646kg/m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to length joint metered corners grinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floormounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5mm thick plain / pin headed glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for nonadherence of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teak wood gutties to R.C.C. columns or masonry on sides, beams and flooring in bottom including cutting, chiselling and making good with cement mortar to match the surface;all the frames thoroughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery, complete as per specification.

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.

Supply and Fixing of Vinyl flooring with 2.00mm thick including cost and conveyance of all materials and labour charges for fixing complete as directed by the departmental officer during execution in all floors.

Painting to existing old plastic emulsion painted walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls.

Supply and fixing Aluminium Venetian Blinds horizontal 20.0 mm wide with all accessories including cost and conveyance of all materials and labour charges complete as directed by the departmental officer during execution. In all floors

Providing painting for old teak wood joinery two coats using first class synthetic enamel paint of approved manufacture and desired shade, including cost and conveyance of all materials , brushes, sand papers, labour charges, incidental charges etc., complete for finished item of work confirming to APSS and as directed during execution.

5 seating workstation (side by side) providing and placing 52.4mm Thick 1200 mm high panels in wish system.with combination of metal raceway at bottom, two intermediate fabric blocks, top tile - fabric tackable, white board, farbic magnetic. Providing powder coated leges 1200wX600d 7 Nos Nova Freestanding pedestals (6464ht X 390w X 435d) 7 Nos. Kbpt Gst @18%