Provision of Intake Well including dewatering cofferdam, pump house on the well walk way to intake pump house but excluding external electrification but including raw water 200HP VTpump Laying of Steel Gallary approach to site spur cutoff wall

Design, drawing. Construction , commission and testing of RCC intake well (upto 20m depth) including dewatering, cofferdam , 5m height pump house on the well, EOT crane (3 tonne to 10 tonne) arrangement 2.5 1 RM to 3.50 1 RM ( as per requirement ) wide RCC/MS walkway upto 50 1 RM ( as per requirement to intake pump house but exclduing external electrificatrion , raw water pump , approch to site, spur and cutoff wall etc. 6.0 1 RM dia. ( 3.0m walk way + 5 Ton EOT )

Installation,testing and commissioning of VT Pump Sets without Control Panel ,having H-73.24 M.Q- 500 M3/hr conforming to IE-3 standard of reputed make such as including of all taxes and transportation to site at Bhawaniptna as per direction of Engineer-in-charge.

Supplying , fitting and fixing and testing of control panel with VFD (Emotron panel) at Junagarh Intake well

75 KW Variable Frequency Drive

75 KW Panel board with adequete space for VFD & cooling arrangement

Construction of Sunken pump house (At Kalimandirpada )

Supplying all materials, labour and T & P etc. and cutting Cement Concrete road for taking the pipeline through as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. 350mm dia.

Supplying all labour and T & P etc. and earthwork in excavation for foundation trenches in all kinds of soil within initial lead and lift including rough dressing and breaking clods to maximum 5 to 7 cm. in size etc. and laying in layers not exceeding 30 cm. in depth and as directed by the Engineer-in-charge all complete.

Supplying all materials, labour and T & P etc. and Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K9 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately) Labour charge for laying only

Supplying all materials, labour and T & P etc. and laying in trenches double socket Cast Iron bends, fittings and specials conforming to I.S : 1538 of the following sizes as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete.

Supplying all materials, labour and T & P etc. and making Tyton joint using rubber rings to spun iron Cast Iron pipes and fittings of the following nominal diameter including testing of the joints as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. (Including Tyton Ring).

Supplying all labour and T&P etc. and filling in pipe line trenches with the excavated earth, well watered & rammed as per specification and as directed by the Engineer-in-charge, all complete.

Transportation by truck/Tractor up to 5 Km lead (DEBRIS & SURPLUS EARTH), including loading unloading and spreading etc. all complete.

Cutting of existing C.I./D.I. Pipe and inserting a special including earth work in excavation and making good the damages as per direction of EIC, all complete.

Providing & fixing of CI mechanical joint collar conforming to IS:13382/92 to flanged ends of Cast Iron Pipes or Ductile Iron Pipes including testing of joints as per specification complete .

Supplying all materials, labour and T & P etc. and including spirally welded M.S pipes and offsets of specified diameter M.S. blank flange, painting the inside and outside surface of pipe with two coats of food grade black anti-corrosive paint of approved make as per I.S. specification with all lead and other taxes etc. including conveying of pipes and the specials and lowering at the trenches on proper bedding and jointing / welding with 3 runs of arc welding including supply of all jointing materials, welding rod, oxyacetylene gas, power supply for fabrication of specials at site with standby arrangement of diesel generator set and dewatering the pipe line etc. shoring and shuttering, barricading and inter-connection of M.S pipe with C.I pipe as per site condition and as per P.H. specification and direction of Engineer-In-Charge, including transportation of all materials to site, all complete.

MS Pipe cost 350mm dia. (8.0mm thick)

MS pipe cutting 350mm dia.

MS pipe welding 350mm dia.

Providing Flanged joints conforming to IS:3114-1994 to Flanged Cast Iron pipes and fittings of following nominal diameter including testing of joints, Cost of Bolts & Nuts and rubber insertions as per specification and direction of the Engineer-in-charge, all complete.

Cost of materials Cost of MS Flanges

350mm dia. MS Flange 16mm thick

100mm dia. CI double air valve PN-1.6

Road Repair Works Municipality Road

Supplying all materials, labour and T&P etc. and filling in foundation and plinth with sand, well watered and rammed including transportation of all materials to site and as directed by the Engineer-in-charge, all complete. (Mending good damages of road).

Supplying all materials, labour and T & P etc. and providing cement concrete (1:4:8) using 40mm size crusher granite metal, as per specification and direction of the EIC, including transportation of all materials to site, all complete. (Mending good damages of road).

Supplying all materials, labour and T&P etc. and providing Cement Concrete ( 1:2:4 ) including hoisting and laying using 12mm size hard granite crusher broken chips, including transportation of all materials to site and as directed by the Engineer-in-charge, all complete. (Mending good damages of road).