Construction of PWD Rest House main Building and Subordinate Rest House with 2 nos. 550 sft. Quarter in village Barota at Gohana in Sonepat District (Pdg. LAN, EPABX, CCTV and Fire Alarm System only)

Amount

EPABX SYSTEM Supply Installation Testing Commissioning of IP-PBX with Cold Standby Configuration, User expandable to 256 Lines with Following Configuration: - 32 Analog Users 08 digital users ISDN PRI - 01 08 Analog Trunks 01 Operator Console with 22 Programmable Key a) Remote Maintenance Facility b) Web Based Managment Software c) Call Accounting Software-01 d) DISA & DOSA Facility e) Rack Mountable System f) Call Control Server / Applicatation should be equipped with Intel Based Processer including cost of all material and Labour required to complete the job in all respect upto the entire satisfacation of Engineer in Charge of the work Make : Avaya IP Office Enterprise/ Alcatel Lucent / Unify Siemens/ Coral / Matrix.

Supply Installation Testing Commissioning of Digital Phones including cost of all materical and Labour required to complete the job in all respect upto the entire satisfacation of Enigeer in charge of the work Make Alcatel Lucent/Avaya/Siemens

Supply Installation Testing Commissioning of Analog Phones including cost of all materical and Labour required to complete the job in all respect upto the entire satisfacation of Enigeer in charge of the work Make Alcatel Lucent/ Beetal

Supply Installation Testing Commissioning of 9U Wall Mounted 19" Networking Enclosure as per specification and complete with all accessories. (upto size - 600mmW x 600mmD) Make Dlink/Comrack/Ritall

Supplying and Laying of 0.5 mm dia 2 pair telephone cable where ever required in prelaid cable tray, RCC hume pipes, DWC pipes or clamped in open manner as applicable, with suitable aesthetic dressing. Make Delton/Finolex/ Polycab

Supply and Installation of Single Telephone I/O Make Dlink/AMP/R&M

Supplying and Laying of 0.5 mm dia Annealed copper jelly filled 10 pair telephone cable where ever required in prelaid cable tray, RCC hume pipes, DWC pipes or clamped in open manner as applicable, with suitable aesthetic dressing. Make Delton/Finolex/ Polycab

SITC, Termination & fixing of 20 pair MDF unit with Tag blocks in a fabricated CRCA powder coated junction box with pad-lock, provision for earthing, inclusive of IPM modules and GDT etc. for overcurrent and overvoltage protection. Make Krone

Supply Installation Testing Commissioning PVC Conduits Supply & laying of 25 mm dia. Open/conceal manner medium gauge rigid PVC pipe with GI pulling wire.

LAN SYSTEM Supply Installation Testing Commissioning of Cat-6 cable in existing PVC conduit /PVC channel complete in all respect with all labour and material required to complete the job in all respect. (HSR 31.80 Make: AMP / Schneider / R&M

Supply Installation Testing Commissioning of UTP Cat-6 information outlet complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work Make: AMP / Schneider /R&M

Supply Installation Testing Commissioning of Face plate (Single / Dual) complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work Make: AMP / Schneider / D-link.

Supply Installation Testing Commissioning of UTP Cat - Mounting Patch Cords complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work Make: AMP / Schneider /R&M 3 ft length

5 ft length

Supply, Erection, testing and commissioning of 24 port 10/100/1000 Base-T, 2 x 10G SFP+ loaded with 2 x 1G modules, 1 x 10/100Base out of band management port,1 x Serial Console Port RJ-45, Switch should support stacking up to 4 switches, switch should have switching fabric performance of minimum 88Gbps switch fabric. Switch should have forwarding rate of 65 Mpps. Switch should have 16 K MAC entries, should support internal /external redundant PSU, Switch should have operating temperature (0 C to 50 C) Make - Cisco / Allied Telesis / Juniper/Alcatel Lucent

Supply, Installation, Testing and comissioning of the Switch configured to provide Wire-Speed Non-Blocking Switching and Routingshould be Performance at Layer 2 and basic Layer 3 on all ports. switch has Gigabit Ethernet 1RU chassis. 24 100/1000 ports, 2 SFP/RJ45 combo, 2 SFP+ 1G/10G ports, one expansion slot. 1588v2 support. Includes an internal AC power supply Switch Should Support IPV4 and IPV6 from day one.The Switch should support full Layer 2 features like STP, RSTP, MSTP, QoS and Make:Cisco/Alcatel/Zyxel/Juniper

Supply Installation Testing Commissioning of 9 U rack including power distribution kit, cable Manager complete in all respect HCL/Comrack/ PRESIDENT make with 2 fan.

Supply Installation Testing Commissioning of 24 port Cat-6 jack patch panel complete as per specification up to the entire satisfaction of Engineer-in-Charge of the work AMP/HCL/ Panduit make.

Supply Installation Testing Commissioning of Cable manager complete as per specification up to the entire satisfaction of Engineer-in-Charge of the work AMP/Panduit Schneider make.

Supply Installation Testing Commissioning of single phase 240 volt AC 2 KVA online UPS with Exide/ Panasonic make batteries back for 1 hour APC / Elent/ Pride/ Microtek make.

CCTV System Supply, Installation, Testing, and commissioning of 1/3" or better progressive scan CMOS sensor, IR DOme IP Network Camera with 2.0M pixels Resolution(1920 x 1080), 30 fps, H.265, H.264 and M-JPEG video compression , 3.2 to 9mm varifocal lens, sensitivity colour 0.12 lux (colour) 0.02 lux(Mono), IR Range 30 mtr, 120dB WDR, Privacy Masking , video analytics:Tracking, line crossing detection ,Enter/leave Field, stationary / moved object ,Loitering, crowd density,follow route. Audio streaming: full duplex /Half Duplex,Intelligent Defog, Pre installed Micro SD Card slot , Simple single cable installation with PoE support for indoor/outdoor application, IP66 , IK 10 Rated, ONVIF Profile S, CE, FCC, UL/VDS Certified i/c Bracket & other accessories for mounting etc. i/c termination etc complete as required and as per specifications attached and as per direction of Engineer-in-Charge. Make: Sony/Bosch/Axis/Pelco/ Honeywell

Supply, Installation, Testing, and commissioning of 1/3" or better progressive scan CMOS sensor, IR Bullet IP Network Camera with 2.0M pixels Resolution(1920 x 1080), 30 fps ,H.265, H.264 and M-JPEG video compression , 3.2 to 9mm varifocal lens, sensitivity colour 0.12 lux (colour) 0.04 lux(Mono), IR Range 30 mtr, 120dB WDR, Privacy Masking , video analytics:Tracking, line crossing detection ,Enter/leave Field, stationary / moved object ,Loitering, crowd density,follow route. Audio streaming: full duplex /Half Duplex,Intelligent Defog, Pre installed Micro SD Card slot , Simple single cable installation with PoE support for indoor/outdoor application, IP66 , IK 10 Rated, ONVIF Profile S, CE, FCC, UL/VDS Certified i/c Bracket & other accessories for mounting etc. i/c termination etc complete as required and as per specifications attached and as per direction of Engineer-in-Charge. Make: Sony/Bosch/Axis/Pelco/ Honeywell

Supply, Installation, Testing, and commissioning of 1080p HD IR PTZ Camera with 1/3" progressive scan CMOS, Effective pixels 1920 (H) x 1080 (V) 1080p @ 60 fps 30x Optical Zoom (4.5 mm–135 mm), 16X Digital Zoom, Minimum Illumination- Color: 0.05 Lux , B/W: 0.01 lux, IR: 0 lux; IR distance 180 m internal or external ; 90 dB WDR or better as per IEC, H.265, H.264, MJPEG streams, Dynamic Noise Reduction,video analytics line crossing, loitering, counter, occupancy counter, object removal should all be included in the camera, BLC, White Balance, Pan Range 360° continuous, Tilt Range 0°±90°, Pan/Tilt Modes - Pan: 0.1°/s - 240°/s; Tilt: 0.1°/s - 120°/s, Presets 256, Tours, Audio- 1/1 Channel In/Out, Micro SD card support, 24 individually configurable privacy masks, Alarm inputs/outputs - 2/1, Dual Power options, Essential Video Analytics in-built, IP66 , ONVIF Profiles S & G, FCC, CE, UL Certified. Make: Sony/Bosch/Axis/Pelco/ Honeywell

Supply Installation testing and Commissioning of 16 channel NVR to control with 8TB HDD & record the camera upto 16 CH 2 megapixel supported H 265, MJPEG codec supported wise stream support 180 Mbps network camera recording, Max. 8HDDs, e-SATA storage supported, HDMI/ VGA local monitor, recording upto 30 days including cost of material labour for fixing to complete in all respect upto entire satisfaction Engineer in charge of works. Make : AXIS/ BOSCH/ PELCO/ SONY/ HONEWELL

Supply, Installation, Testing and comissioning of Layer-2 POE plus Gigabit Ethernet 1RU chassis with 24 PoE 10/100/1000 BaseT ports and 4 Gigabit SFP ports. Includes an internal AC power supply 370W atleast or higher power budget) with a power cord, manuals access card, and RJ- 45 to DB-9 adaptor.The Access Switch should have 4 ports of 1 G SFP.The Access Switch should provide Non-Blocking switch fabric capacity of 56 Gbps or more. L-2 switch should provide wire-speed packet forwarding of 41 Mpps or more. L-2 Switch should support min 16K MAC addresses and min 4000 active VLANs.Make:Cisco/Alcatel/Zyxel/Juniper

Supply Installation Testing & Commissioning of 12U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit Make: Netrack/Comrack/Valrack.

Supply, Installation, Testing and comissioning of 17U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per thespecifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Makes: Valrack /Netrack/ Comrack

Supply Installation Testing & Commissioning of 43" LED Monitor, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, Make: Sony/Panasonic/Samsung/ LG

Supply Installation Testing & Commissioning of CAT 6 UTP Cable.Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be jacket FR PVC Lbp 69% required with certification report. Make: Panduit/R&M/Systimax)/Dlink

Supply and erection of PVC pipe25mm dia ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work Make: BEC, AKG, Diplast

Fire Alarm System SITC of Micro processor based 2 wire fault tolerant, networkable type Fire Alarm / Detection Control Panel (having nos. of loops to suit minimum 20% extra over the nos. of fire detectors. The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 characters LCD unit/ 5.7’’TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet Steel power coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80 LED Indicators. The Panel shall have 3 Serial Ports. The pane\l shall have a built in power supply and battery charger along with maintenance free 24 AH,2 x 12 volt SMF lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required. And conforming to BS5839 standards and Duly Approved by EN 54/UL/VDS/ as per specifications complete in all respect up to the entire satisfaction of Engineer-in –charge of work. Make: Bosch / Cerberus by siements/ Edwards/ Morley

SITC of addressable multisensor detector with a combination of optical and thermal including base, auto addressing features as required. Detectors should have 2 as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elemnets in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance wiht EFSG agreement EFSG/F/97/005. EMC safety for detector shall be 50 V/m. shall be EN54/VDS/UL certification. ((Detectors without inbuilt isolators may be considered with an additional isolator module after 20 devices) Make: Bosch , Siemens Cerberus , Honeywell Morley , Edwards

SITC of addressable Heat Detector wht fixed and rate of raise feature including mounting base with LED etc complete as required. Each detector should have 2 as per NFPA 72 style 7 wiring requirement (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to eletrmagnetic effects in accordance with EFSG agreement EFSG/F/97/005. Detector should monitor electromagnetic interfarence and report to the panel-current and average values, EMC safety for detector shall be 50 V/m. shall be EN54/VDS/U: certification. (Detectors without inbuilt isoaltors may be considered with an additional isolator module per detector. (Make: Bosch , Siemensr Cerberus, Edwards

SITC of intelligent analog addressable type Manual Call point having surface or flush mounting option fully compliant to EN54 having rotary decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect upto the entire satisfaction of Engineer-in-Chage of the work. Make Siemens cerberus/ Edwards

SITC of addressable Loop powered hooter with strobe complete with mounting base as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required complete the ob in all respect upto the entire satisfaction of Engineer - in - charge of work. Make: Bosch/ Siemens Cerberus/ Edward.

SITC of Glow Type EXIT Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink sulphate as bare chemical class 1 material PSPA fixed on 3mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener Make GLOLITE / PEARL / OMEX

SITC of Addressable Control Relay Module with flexible network structures with a maximun switching current of 1A @ 30V DC. Shall be EN54/UL/VDS Certification Makes :Bosch /Siemens Cerberus / Morley / Edwards

SITC of Intelligent Analog Addressable Type Monitor Modules having option of RAIL or Surface Mounting with Tri Color LED status indicator with Built in Short Circuit Isolators having Visible Rotary Decade Address Switch from 01-99 dully approved to GEA GEW1-082 conforming to BS5839 Standards and Duly approved by EN54/LPCB/VDS with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. (Makes: Bosch- Siemens cerberus , Edwards

SITC of minimum 1000 Mtr. Range Kheraj / National make SIRON generator provided at the roof of the building with separate Power SITC, relay.

Supply and erection of Fire Extinguishers duly hang on wall with necessary hook complete in all respect. Make Make: Safex / Minimax / Cease Fire). ABC dry Powder extinguisher 6 Kg Cap

Water CO2 9Ltr Cap

CO2 type 4.5kg cap

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Havells /Polycab/Finolex Size 1.5 sq.mm

Supply Installation Testing Commissioning of UL/EN54/LPCB listed and FM approved line isloating for isolation the section of circuit in case of short in the addressable loop wiring Make: Bosch / Siemens Cerberus/ Morley.

SITC of PVC conduit pipe 25mm dia ISI marked (medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer -in-charge of the work. Make: BEC, AKG, Diplast

Prime Computers